- 07 Sep, 2020 12 commits
-
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_asrc, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200904132744.1699575-13-kai.vehmanen@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_src, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_host, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_volume, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_mixer, construct the ipc for COMP_NEW during the topology load stage. Signed-off-by:
-
Keyon Jie authored
Append the extended data to the end of the struct sof_ipc_comp_dai, and update the ext_data_offset, to construct the IPC for the topology load and runtime restore. Signed-off-by:
-
Keyon Jie authored
Add helper to allocate buffer for IPC component, configure the basic settings, and set up the extended data for the subsequent IPC sending. Signed-off-by:
-
Keyon Jie authored
Use the 32bit reserved member of the struct sof_ipc_comp as the extended data length, this will help to minimize the ABI change for adding new extended data to the struct sof_ipc_comp, usually only minor ABI version bump needed for every update with this new solution. Signed-off-by:
-
Keyon Jie authored
Parse comp_ext_tokens in the common sof_widget_ready(), and the swidget->comp_ext will be used to construct the COMP_NEW ipc in the subsequent commits. Signed-off-by:
-
Keyon Jie authored
Add comp_ext_tokens which will be used to parse all extended tokens, these tokens will be stored it to struct snd_sof_widget. Signed-off-by:
-
Keyon Jie authored
Add member comp_ext to struct snd_sof_widget, which will be used for topology extended tokens parsing. Signed-off-by:
-
Keyon Jie authored
Add the definition SOF_TKN_COMP_UUID for the component UUID token, this shall be used for all types of component in the future. Signed-off-by:
-
- 04 Sep, 2020 6 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: multi core support for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: This series extends the multi-core support in SOF. Capability to specify which core to use, on a per component basis, is added to topology. The topology load functionality in SOF is modified to power up/down host controlled cores based on the topology description. Guennadi Liakhovetski (2): ASoC: SOF: add a "core" parameter to widget loading functions ASoC: SOF: support topology components on secondary cores Ranjani Sridharan (1): ASoC: SOF: topology: fix core enable sequence include/uapi/sound/sof/tokens.h | 1 + sound/soc/sof/pm.c | 1 + sound/soc/sof/sof-audio.c | 25 ++++ sound/soc/sof/sof-audio.h | 5 + sound/soc/sof/sof-priv.h | 3 + sound/soc/sof/topology.c | 210 ++++++++++++++++++++++---------- 6 files changed, 184 insertions(+), 61 deletions(-) -- 2.27.0
-
Krzysztof Kozlowski authored
Usage of "unevaluatedProperties: false" is not correct as it suppresses warnings about all undocumented properties. Instead, add all missing properties. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200903203250.19830-2-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Usage of "unevaluatedProperties: false" is not correct as it suppresses warnings about all undocumented properties. Instead, add all missing properties. Signed-off-by:
-
Ranjani Sridharan authored
Core power up involves 2 steps: The first step tries to power up the core by setting the ADSPCS.SPA bit for the host-managed cores. The second step involves sending the IPC to power up other cores that are not host managed. The enabled_cores_mask should be updated only when both these steps are successful. If the IPC to the DSP fails, the host-managed core that was powered in step 1 should be powered off before returning the error. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Currently SOF supports running pipelines on secondary DSP cores in a limited way. This patch represents the next step in SOF multi-core DSP support, it adds checks for core ID to individual topology components. It takes care to power up all the requested cores. More advanced DSP core power management should be added in the future. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
We want to be able to explicitly assign cores to individual pipeline components. This patch adds a "core" parameter to widget loading functions to be sent to the DSP for appropriate component scheduling. Signed-off-by:
-
- 03 Sep, 2020 2 commits
-
-
Shengjiu Wang authored
Transmit data pins will output zero when slots are masked or channels are disabled. In CHMOD TDM mode, transmit data pins are tri-stated when slots are masked or channels are disabled. When data pins are tri-stated, there is noise on some channels when FS clock value is high and data is read while fsclk is transitioning from high to low. Signed-off-by:
Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1599112427-22038-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
One data channel is one data line. From imx7ulp, the SAI IP is enhanced to support multiple data channels. If there is only two channels input and slots is 2, then enable one data channel is enough for data transfer. So enable the TCE/RCE and transmit/receive mask register according to the input channels and slots configuration. Move the data channel enablement from startup() to hw_params(). Signed-off-by:
-
- 01 Sep, 2020 4 commits
-
-
Krzysztof Kozlowski authored
Additional properties or nodes actually might appear (e.g. assigned-clocks) so use unevaluatedProperties to fix dtbs_check warnings like: arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200830112633.6732-2-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The "sound-dai" property has cells therefore phandle-array should be used, even if it is just one phandle. This fixes dtbs_check warnings like: arch/arm/boot/dts/exynos4412-trats2.dt.yaml: sound: cpu:sound-dai:0:1: missing phandle tag in 0 arch/arm/boot/dts/exynos4412-trats2.dt.yaml: sound: cpu:sound-dai:0: [158, 0] is too long Signed-off-by:
-
Krzysztof Kozlowski authored
Additional properties actually might appear (e.g. power-domains) so use unevaluatedProperties to fix dtbs_check warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2s@11440000: Additional properties are not allowed ('power-domains', '#address-cells', 'interrupts', '#size-cells' were unexpected) Signed-off-by: -
Douglas Anderson authored
The probe of rt5682 is pretty slow. A quick measurement shows that it takes ~650 ms on at least one board. There's no reason to block all other drivers waiting for this probe to finish. Set the flag to allow other drivers to probe while we're probing. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200828162005.1.I4f67f494c4f759b0e5c7f487e040dfdcf16e0876@changeidSigned-off-by:
-
- 28 Aug, 2020 2 commits
-
-
Dan Murphy authored
Add the audio routing map to enable the digital mic paths when the analog mic paths are not enabled. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200828112855.10112-1-dmurphy@ti.comSigned-off-by:
-
Dmitry Baryshkov authored
Current fmt_single_name code limits maximum name of a DAI or component to 32 bytes. On some systems corresponding device names might be longer than that (e.g. 17300000.remoteproc:glink-edge:apr:apr-service@8:routing). This will result in duplicate DAI/component names. Rewrite fmt_single_name() to remove such length limitations. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200827205100.1479331-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
- 27 Aug, 2020 12 commits
-
-
Mark Brown authored
Merge series "SOF fixes and updates for FW boot" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This series includes fixes and updates for the FW boot sequence for Intel platforms. Ranjani Sridharan (7): ALSA: hda: fix VS_LTRC register name ASoC: SOF: Intel: hda: Add helper function to program ICCMAX stream ASoC: SOF: Intel: hda: modify the signature of get_stream_with_tag() ASoC: SOF: Intel: hda: define macro for code loader stream format ASoC: SOF: Intel: hda: Define FW boot sequence with ICCMAX ASoC: SOF: Intel: hda: Add sof_tgl_ops for TGL platforms ASoC: SOF: Intel: hda: Simplify error handling during FW boot Yong Zhi (1): ASoC: SOF: Intel: hda: Remove unused parameters in cl_dsp_init() include/sound/hda_register.h | 2 +- sound/soc/sof/intel/Makefile | 2 +- sound/soc/sof/intel/cnl.c | 23 +---- sound/soc/sof/intel/hda-ipc.h | 4 + sound/soc/sof/intel/hda-loader.c | 145 ++++++++++++++++++------------- sound/soc/sof/intel/hda-stream.c | 69 +++++++++++++++ sound/soc/sof/intel/hda.h | 6 ++ sound/soc/sof/intel/tgl.c | 137 +++++++++++++++++++++++++++++ sound/soc/sof/sof-pci-dev.c | 2 +- 9 files changed, 306 insertions(+), 84 deletions(-) create mode 100644 sound/soc/sof/intel/tgl.c -- 2.25.1
-
Kuninori Morimoto authored
commit 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") added snd_soc_dai_link_set_capabilities(). But it is using snd_soc_find_dai() (A) which is required client_mutex (B). And client_mutex is soc-core.c local. struct snd_soc_dai *snd_soc_find_dai(xxx) { ... (B) lockdep_assert_held(&client_mutex); ... } void snd_soc_dai_link_set_capabilities(xxx) { ... for_each_pcm_streams(direction) { ... for_each_link_cpus(dai_link, i, cpu) { (A) dai = snd_soc_find_dai(cpu); ... } ... for_each_link_codecs(dai_link, i, codec) { (A) dai = snd_soc_find_dai(codec); ... } } ... } Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP. WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100 CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : snd_soc_find_dai+0xf8/0x100 lr : snd_soc_find_dai+0xf4/0x100 ... Call trace: snd_soc_find_dai+0xf8/0x100 snd_soc_dai_link_set_capabilities+0xa0/0x16c graph_dai_link_of_dpcm+0x390/0x3c0 graph_for_each_link+0x134/0x200 graph_probe+0x144/0x230 platform_drv_probe+0x5c/0xb0 really_probe+0xe4/0x430 driver_probe_device+0x60/0xf4 snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with mutex lock, and (Y) Card driver without mutex lock. This snd_soc_dai_link_set_capabilities() is for Card driver, this means called without mutex. This patch adds snd_soc_find_dai_with_mutex() to solve it. Fixes: 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Pavel Dobias authored
Changing filter type without disabling codec results in filter malfunction. Disable codec when changing filter type. Signed-off-by:
Pavel Dobias <dobias@2n.cz> Link: https://lore.kernel.org/r/20200827102528.29677-1-dobias@2n.czSigned-off-by:
-
Akshu Agrawal authored
While the driver waits for DAIs to be probed and retries probing, have the error messages at debug level instead of error. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200826185454.5545-1-akshu.agrawal@amd.comSigned-off-by:
-
Ranjani Sridharan authored
Modify cl_stream_prepare() to return a pointer to the prepared stream if successful or ERR_PTR() otherwise. This would simplify the error paths in hda_dsp_cl_boot_firmware() and hda_dsp_cl_boot_firmware_iccmax() to perform the stream cleanup after FW boot. This change also renders the function get_stream_with_tag() redundant. Reviewed-by:
-
Ranjani Sridharan authored
Separate the dsp ops for TGL ops to specify the use of ICCMAX FW boot sequence in the run op. All other ops are identical. Also separate the TGL descriptors into a separate file to make it easier to follow. Reviewed-by:
-
Ranjani Sridharan authored
Define the FW boot sequence for platforms that are recommended to use ICCMAX. This function uses the existing prepare and cleanup functions for creating a specially crafted capture stream before powering up the DSP cores. Reviewed-by:
-
Ranjani Sridharan authored
This will be used for the ICCMAX stream as well. Reviewed-by:
-
Ranjani Sridharan authored
Modify the signature of get_stream_with_tag() to add the direction as an argument to extend it for using with capture streams. Reviewed-by:
-
Ranjani Sridharan authored
For some platforms, the recommended HW sequence for FW boot involves starting a specially crafted capture stream before powering on the DSP cores. Add a helper function to define the minimal recommended stream programming sequence for this stream. Reviewed-by:
-
Yong Zhi authored
cl_dsp_init() doesn't use the fwdata and fwsize parameters. Remove it, and update caller accordingly. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
-
Ranjani Sridharan authored
It should be called VS_LTRP instead. Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200826184532.1612070-2-ranjani.sridharan@linux.intel.comSigned-off-by:
-
- 26 Aug, 2020 2 commits
-
-
Mark Brown authored
This series includes fixes for error reporting, topology parsing and runtime PM issues along with updates for DMIC support and IMX platforms. Iulian Olaru (2): ASoC: SOF: imx: Replace sdev->private with sdev->pdata->hw_pdata ASoC: SOF: sof-of-dev: Add .arch_ops field Jaska Uimonen (1): ASoC: SOF: intel: hda: support also devices with 1 and 3 dmics Keyon Jie (1): ASoC: SOF: topology: fix the ipc_size calculation for process component Rander Wang (1): ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work Ranjani Sridharan (2): ASoC: SOF: Intel: hda: report error only for the last ROM init iteration ASoC: SOF: Intel: hda: add extended rom status dump to error log sound/soc/sof/imx/Kconfig | 2 ++ sound/soc/sof/imx/imx8.c | 17 +++++++++---- sound/soc/sof/imx/imx8m.c | 10 +++++--- sound/soc/sof/intel/hda-codec.c | 4 +-- sound/soc/sof/intel/hda-loader.c | 42 +++++++++++++++++++------------- sound/soc/sof/intel/hda.c | 26 +++++++++++++++++++- sound/soc/sof/topology.c | 4 +-- 7 files changed, 74 insertions(+), 31 deletions(-) -- 2.25.1 -
Iulian Olaru authored
Add .arch_ops field in the sof_imx8x_ops structure. The inclusion of this field will allow the usage of functions from sof/core.c in order to print debug information such as the registers and a stack dump in case of a firmware ops. The SND_SOC_SOF_XTENSA is added in the imx/Kconfig file so the compilation is successful. Signed-off-by:
Iulian Olaru <iulianolaru249@yahoo.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
