Skip to content

L
linux
Switch branch/tag
  1. 06 Oct, 2020 8 commits
  3. 05 Oct, 2020 3 commits
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86 · 7575fdda
      Linus Torvalds authored 
      Pull x86 platform driver fixes from Andy Shevchenko:
 "We have some fixes for Tablet Mode reporting in particular, that users
  are complaining a lot about.

  Summary:

   - Attempt #3 of enabling Tablet Mode reporting w/o regressions

   - Improve battery recognition code in ASUS WMI driver

   - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers

   - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling

   - Fix power supply extended topology in Mellanox driver

   - Fix memory leak in OLPC EC driver

   - Avoid static struct device in Intel PMC core driver

   - Add support for the touchscreen found in MPMAN Converter9 2-in-1

   - Update MAINTAINERS to reflect the real state of affairs"

* tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse
  MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers
  platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting
  platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"
  platform/x86: intel_pmc_core: do not create a static struct device
  platform/x86: mlx-platform: Fix extended topology configuration for power supply units
  platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
  platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP
  platform/x86: fix kconfig dependency warning for LG_LAPTOP
  platform/x86: thinkpad_acpi: initialize tp_nvram_state variable
  platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360
  platform/x86: asus-wmi: Add BATC battery name to the list of supported
  platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA"
  platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1
  Documentation: laptops: thinkpad-acpi: fix underline length build warning
  Platform: OLPC: Fix memleak in olpc_ec_probe
      7575fdda
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 165563c0
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Make sure SKB control block is in the proper state during IPSEC
    ESP-in-TCP encapsulation. From Sabrina Dubroca.

 2) Various kinds of attributes were not being cloned properly when we
    build new xfrm_state objects from existing ones. Fix from Antony
    Antony.

 3) Make sure to keep BTF sections, from Tony Ambardar.

 4) TX DMA channels need proper locking in lantiq driver, from Hauke
    Mehrtens.

 5) Honour route MTU during forwarding, always. From Maciej
    Żenczykowski.

 6) Fix races in kTLS which can result in crashes, from Rohit
    Maheshwari.

 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
    Jha.

 8) Use correct address family in xfrm state lookups, from Herbert Xu.

 9) A bridge FDB flush should not clear out user managed fdb entries
    with the ext_learn flag set, from Nikolay Aleksandrov.

10) Fix nested locking of netdev address lists, from Taehee Yoo.

11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.

12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.

13) Don't free command entries in mlx5 while comp handler could still be
    running, from Eran Ben Elisha.

14) Error flow of request_irq() in mlx5 is busted, due to an off by one
    we try to free and IRQ never allocated. From Maor Gottlieb.

15) Fix leak when dumping netlink policies, from Johannes Berg.

16) Sendpage cannot be performed when a page is a slab page, or the page
    count is < 1. Some subsystems such as nvme were doing so. Create a
    "sendpage_ok()" helper and use it as needed, from Coly Li.

17) Don't leak request socket when using syncookes with mptcp, from
    Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
  net/core: check length before updating Ethertype in skb_mpls_{push,pop}
  net: mvneta: fix double free of txq->buf
  net_sched: check error pointer in tcf_dump_walker()
  net: team: fix memory leak in __team_options_register
  net: typhoon: Fix a typo Typoon --> Typhoon
  net: hinic: fix DEVLINK build errors
  net: stmmac: Modify configuration method of EEE timers
  tcp: fix syn cookied MPTCP request socket leak
  libceph: use sendpage_ok() in ceph_tcp_sendpage()
  scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
  drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
  tcp: use sendpage_ok() to detect misused .sendpage
  nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
  net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
  net: introduce helper sendpage_ok() in include/linux/net.h
  net: usb: pegasus: Proper error handing when setting pegasus' MAC address
  net: core: document two new elements of struct net_device
  netlink: fix policy dump leak
  net/mlx5e: Fix race condition on nhe->n pointer in neigh update
  net/mlx5e: Fix VLAN create flow
  ...
      165563c0
    • Aaron Ma's avatar
      platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse · 720ef73d
      Aaron Ma authored 
      Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0.
When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered.

Re-initialize buffer size will make ACPI evaluate successfully.

Fixes: 46445b6b ("thinkpad-acpi: fix handle locate for video and query of _BCL")
Signed-off-by: default avatarAaron Ma <aaron.ma@canonical.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      720ef73d
  5. 04 Oct, 2020 6 commits
  7. 03 Oct, 2020 12 commits
  9. 02 Oct, 2020 11 commits
    • David S. Miller's avatar
      Merge tag 'mlx5-fixes-2020-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · ab0faf5f
      David S. Miller authored 
      From: Saeed Mahameed <saeedm@nvidia.com>

====================
This series introduces some fixes to mlx5 driver.

v1->v2:
 - Patch #1 Don't return while mutex is held. (Dave)

v2->v3:
 - Drop patch #1, will consider a better approach (Jakub)
 - use cpu_relax() instead of cond_resched() (Jakub)
 - while(i--) to reveres a loop (Jakub)
 - Drop old mellanox email sign-off and change the committer email
   (Jakub)

Please pull and let me know if there is any problem.

For -stable v4.15
 ('net/mlx5e: Fix VLAN cleanup flow')
 ('net/mlx5e: Fix VLAN create flow')

For -stable v4.16
 ('net/mlx5: Fix request_irqs error flow')

For -stable v5.4
 ('net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU')
 ('net/mlx5: Avoid possible free of command entry while timeout comp handler')

For -stable v5.7
 ('net/mlx5e: Fix return status when setting unsupported FEC mode')

For -stable v5.8
 ('net/mlx5e: Fix race condition on nhe->n pointer in neigh update')
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab0faf5f
    • Paolo Abeni's avatar
      tcp: fix syn cookied MPTCP request socket leak · 9d8c05ad
      Paolo Abeni authored 
      If a syn-cookies request socket don't pass MPTCP-level
validation done in syn_recv_sock(), we need to release
it immediately, or it will be leaked.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/89
Fixes: 9466a1cc ("mptcp: enable JOIN requests even if cookies are in use")
Reported-and-tested-by: default avatarGeliang Tang <geliangtang@gmail.com>
Reviewed-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d8c05ad
    • David S. Miller's avatar
      Merge branch 'Introduce-sendpage_ok-to-detect-misused-sendpage-in-network-related-drivers' · e7d4005d
      David S. Miller authored 
      Coly Li says:

====================
Introduce sendpage_ok() to detect misused sendpage in network related drivers

As Sagi Grimberg suggested, the original fix is refind to a more common
inline routine:
    static inline bool sendpage_ok(struct page *page)
    {
        return  (!PageSlab(page) && page_count(page) >= 1);
    }
If sendpage_ok() returns true, the checking page can be handled by the
concrete zero-copy sendpage method in network layer.

The v10 series has 7 patches, fixes a WARN_ONCE() usage from v9 series,
- The 1st patch in this series introduces sendpage_ok() in header file
  include/linux/net.h.
- The 2nd patch adds WARN_ONCE() for improper zero-copy send in
  kernel_sendpage().
- The 3rd patch fixes the page checking issue in nvme-over-tcp driver.
- The 4th patch adds page_count check by using sendpage_ok() in
  do_tcp_sendpages() as Eric Dumazet suggested.
- The 5th and 6th patches just replace existing open coded checks with
  the inline sendpage_ok() routine.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e7d4005d
    • Coly Li's avatar
      libceph: use sendpage_ok() in ceph_tcp_sendpage() · 40efc4dc
      Coly Li authored 
      In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
	if (page_count(page) >= 1 && !PageSlab(page))

This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Acked-by: default avatarJeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      40efc4dc
    • Coly Li's avatar
      scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() · 6aa25c73
      Coly Li authored 
      In iscsci driver, iscsi_tcp_segment_map() uses the following code to
check whether the page should or not be handled by sendpage:
    if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)))

The "page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)" part is to
make sure the page can be sent to network layer's zero copy path. This
part is exactly what sendpage_ok() does.

This patch uses  use sendpage_ok() in iscsi_tcp_segment_map() to replace
the original open coded checks.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Reviewed-by: default avatarLee Duncan <lduncan@suse.com>
Acked-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chris Leech <cleech@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6aa25c73
    • Coly Li's avatar
      drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() · fb25ebe1
      Coly Li authored 
      In _drbd_send_page() a page is checked by following code before sending
it by kernel_sendpage(),
        (page_count(page) < 1) || PageSlab(page)
If the check is true, this page won't be send by kernel_sendpage() and
handled by sock_no_sendpage().

This kind of check is exactly what macro sendpage_ok() does, which is
introduced into include/linux/net.h to solve a similar send page issue
in nvme-tcp code.

This patch uses macro sendpage_ok() to replace the open coded checks to
page type and refcount in _drbd_send_page(), as a code cleanup.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fb25ebe1
    • Coly Li's avatar
      tcp: use sendpage_ok() to detect misused .sendpage · cf83a17e
      Coly Li authored 
      commit a10674bf ("tcp: detecting the misuse of .sendpage for Slab
objects") adds the checks for Slab pages, but the pages don't have
page_count are still missing from the check.

Network layer's sendpage method is not designed to send page_count 0
pages neither, therefore both PageSlab() and page_count() should be
both checked for the sending page. This is exactly what sendpage_ok()
does.

This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused
.sendpage, to make the code more robust.

Fixes: a10674bf ("tcp: detecting the misuse of .sendpage for Slab objects")
Suggested-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf83a17e
    • Coly Li's avatar
      nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() · 7d4194ab
      Coly Li authored 
      Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to
send slab pages. But for pages allocated by __get_free_pages() without
__GFP_COMP, which also have refcount as 0, they are still sent by
kernel_sendpage() to remote end, this is problematic.

The new introduced helper sendpage_ok() checks both PageSlab tag and
page_count counter, and returns true if the checking page is OK to be
sent by kernel_sendpage().

This patch fixes the page checking issue of nvme_tcp_try_send_data()
with sendpage_ok(). If sendpage_ok() returns true, send this page by
kernel_sendpage(), otherwise use sock_no_sendpage to handle this page.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d4194ab
    • Coly Li's avatar
      net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send · 7b62d31d
      Coly Li authored 
      If a page sent into kernel_sendpage() is a slab page or it doesn't have
ref_count, this page is improper to send by the zero copy sendpage()
method. Otherwise such page might be unexpected released in network code
path and causes impredictable panic due to kernel memory management data
structure corruption.

This path adds a WARN_ON() on the sending page before sends it into the
concrete zero-copy sendpage() method, if the page is improper for the
zero-copy sendpage() method, a warning message can be observed before
the consequential unpredictable kernel panic.

This patch does not change existing kernel_sendpage() behavior for the
improper page zero-copy send, it just provides hint warning message for
following potential panic due the kernel memory heap corruption.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Cong Wang <amwang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7b62d31d
    • Coly Li's avatar
      net: introduce helper sendpage_ok() in include/linux/net.h · c381b079
      Coly Li authored 
      The original problem was from nvme-over-tcp code, who mistakenly uses
kernel_sendpage() to send pages allocated by __get_free_pages() without
__GFP_COMP flag. Such pages don't have refcount (page_count is 0) on
tail pages, sending them by kernel_sendpage() may trigger a kernel panic
from a corrupted kernel heap, because these pages are incorrectly freed
in network stack as page_count 0 pages.

This patch introduces a helper sendpage_ok(), it returns true if the
checking page,
- is not slab page: PageSlab(page) is false.
- has page refcount: page_count(page) is not zero

All drivers who want to send page to remote end by kernel_sendpage()
may use this helper to check whether the page is OK. If the helper does
not return true, the driver should try other non sendpage method (e.g.
sock_no_sendpage()) to handle the page.
Signed-off-by: default avatarColy Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c381b079
    • Petko Manolov's avatar
      net: usb: pegasus: Proper error handing when setting pegasus' MAC address · f30e25a9
      Petko Manolov authored 
      v2:

If reading the MAC address from eeprom fail don't throw an error, use randomly
generated MAC instead.  Either way the adapter will soldier on and the return
type of set_ethernet_addr() can be reverted to void.

v1:

Fix a bug in set_ethernet_addr() which does not take into account possible
errors (or partial reads) returned by its helpers.  This can potentially lead to
writing random data into device's MAC address registers.
Signed-off-by: default avatarPetko Manolov <petko.manolov@konsulko.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f30e25a9
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7