- 15 Jul, 2019 4 commits
-
-
Suraj Jitindar Singh authored
The Performance Stop Status and Control Register (PSSCR) is used to control the power saving facilities of the processor. This register has various fields, some of which can be modified only in hypervisor state, and others which can be modified in both hypervisor and privileged non-hypervisor state. The bits which can be modified in privileged non-hypervisor state are referred to as guest visible. Currently the L0 hypervisor saves and restores both it's own host value as well as the guest value of the PSSCR when context switching between the hypervisor and guest. However a nested hypervisor running it's own nested guests (as indicated by kvmhv_on_pseries()) doesn't context switch the PSSCR register. That means if a nested (L2) guest modifies the PSSCR then the L1 guest hypervisor will run with that modified value, and if the L1 guest hypervisor modifies the PSSCR and then goes to run the nested (L2) guest again then the L2 PSSCR value will be lost. Fix this by having the (L1) nested hypervisor save and restore both its host and the guest PSSCR value when entering and exiting a nested (L2) guest. Note that only the guest visible parts of the PSSCR are context switched since this is all the L1 nested hypervisor can access, this is fine however as these are the only fields the L0 hypervisor provides guest control of anyway and so all other fields are ignored. This could also have been implemented by adding the PSSCR register to the hv_regs passed to the L0 hypervisor as input to the H_ENTER_NESTED hcall, however this would have meant updating the structure layout and thus required modifications to both the L0 and L1 kernels. Whereas the approach used doesn't require L0 kernel modifications while achieving the same result. Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190703012022.15644-3-sjitindarsingh@gmail.com
-
Suraj Jitindar Singh authored
The ability to run nested guests under KVM means that a guest can also act as a hypervisor for it's own nested guest. Currently ppc_set_pmu_inuse() assumes that either FW_FEATURE_LPAR is set, indicating a guest environment, and so sets the pmcregs_in_use flag in the lppaca, or that it isn't set, indicating a hypervisor environment, and so sets the pmcregs_in_use flag in the paca. The pmcregs_in_use flag in the lppaca is used to communicate this information to a hypervisor and so must be set in a guest environment. The pmcregs_in_use flag in the paca is used by KVM code to determine whether the host state of the performance monitoring unit (PMU) must be saved and restored when running a guest. Thus when a guest also acts as a hypervisor it must set this bit in both places since it needs to ensure both that the real hypervisor saves it's PMU registers when it runs (requires pmcregs_in_use flag in lppaca), and that it saves it's own PMU registers when running a nested guest (requires pmcregs_in_use flag in paca). Modify ppc_set_pmu_inuse() so that the pmcregs_in_use bit is set in both the lppaca and the paca when a guest (LPAR) is running with the capability of running it's own guests (CONFIG_KVM_BOOK3S_HV_POSSIBLE). Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190703012022.15644-2-sjitindarsingh@gmail.com
-
Suraj Jitindar Singh authored
The performance monitoring unit (PMU) registers are saved on guest exit when the guest has set the pmcregs_in_use flag in its lppaca, if it exists, or unconditionally if it doesn't. If a nested guest is being run then the hypervisor doesn't, and in most cases can't, know if the PMU registers are in use since it doesn't know the location of the lppaca for the nested guest, although it may have one for its immediate guest. This results in the values of these registers being lost across nested guest entry and exit in the case where the nested guest was making use of the performance monitoring facility while it's nested guest hypervisor wasn't. Further more the hypervisor could interrupt a guest hypervisor between when it has loaded up the PMU registers and it calling H_ENTER_NESTED or between returning from the nested guest to the guest hypervisor and the guest hypervisor reading the PMU registers, in kvmhv_p9_guest_entry(). This means that it isn't sufficient to just save the PMU registers when entering or exiting a nested guest, but that it is necessary to always save the PMU registers whenever a guest is capable of running nested guests to ensure the register values aren't lost in the context switch. Ensure the PMU register values are preserved by always saving their value into the vcpu struct when a guest is capable of running nested guests. This should have minimal performance impact however any impact can be avoided by booting a guest with "-machine pseries,cap-nested-hv=false" on the qemu commandline. Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190703012022.15644-1-sjitindarsingh@gmail.com
-
Suraj Jitindar Singh authored
The virtual real mode addressing (VRMA) mechanism is used when a partition is using HPT (Hash Page Table) translation and performs real mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode effective address bits 0:23 are treated as zero (i.e. the access is aliased to 0) and the access is performed using an implicit 1TB SLB entry. The size of the RMA (Real Memory Area) is communicated to the guest as the size of the first memory region in the device tree. And because of the mechanism described above can be expected to not exceed 1TB. In the event that the host erroneously represents the RMA as being larger than 1TB, guest accesses in real mode to memory addresses above 1TB will be aliased down to below 1TB. This means that a memory access performed in real mode may differ to one performed in virtual mode for the same memory address, which would likely have unintended consequences. To avoid this outcome have the guest explicitly limit the size of the RMA to the current maximum, which is 1TB. This means that even if the first memory block is larger than 1TB, only the first 1TB should be accessed in real mode. Fixes: c610d65c ("powerpc/pseries: lift RTAS limit for hash") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190710052018.14628-1-sjitindarsingh@gmail.com
-
- 13 Jul, 2019 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Just a few small changes: - Fix console naming inconsistency with hypervisor consoles, from John Paul Adrian Glaubitz - Fix userland compilation due to use of u_int, from Masahiro Yamada" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Add missing newline at end of file sparc: fix unknown type name u_int in uapi header sparc: configs: Remove useless UEVENT_HELPER_PATH sparc: Remove redundant copy of the LGPL-2.0 sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann. 2) Missing skb queue lock init in tipc, from Chris Packham. 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet. 4) Elide flow dissection of local packets in FIB rules, from Petar Penkov. 5) Fix TLS support build failure in mlx5, from Tariq Toukab. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ppp: mppe: Revert "ppp: mppe: Add softdep to arc4" net: dsa: qca8k: replace legacy gpio include net: hisilicon: Use devm_platform_ioremap_resource cxgb4: reduce kernel stack usage in cudbg_collect_mem_region() tipc: ensure head->lock is initialised tc-tests: updated skbedit tests nfp: flower: ensure ip protocol is specified for L4 matches nfp: flower: fix ethernet check on match fields net/mlx5e: Provide cb_list pointer when setting up tc block on rep net: phy: make exported variables non-static net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd() davinci_cpdma: don't cast dma_addr_t to pointer net: openvswitch: do not update max_headroom if new headroom is equal to old headroom net/mlx5e: Convert single case statement switch statements into if statements net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off net/mlx5e: Fix compilation error in TLS code ipv6: fix static key imbalance in fl_create() ipv6: fix potential crash in ip6_datagram_dst_update() ipv6: tcp: fix flowlabels reflection for RST packets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds authored
Pull IDE update from David Miller: "Small cleanup" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: use BIT() macro for defining bit-flags
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
-
Linus Torvalds authored
Merge tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add encrypted byte-offset initialization vector (eboiv) to DM crypt. - Add optional discard features to DM snapshot which allow freeing space from a DM device whose free space was exhausted. - Various small improvements to use struct_size() and kzalloc(). - Fix to check if DM thin metadata is in fail_io mode before attempting to update the superblock to set the needs_check flag. Otherwise the DM thin-pool can hang. - Fix DM bufio shrinker's potential for ABBA recursion deadlock with DM thin provisioning on loop usecase. * tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix deadlock with loop device dm snapshot: add optional discard support features dm crypt: implement eboiv - encrypted byte-offset initialization vector dm crypt: remove obsolete comment about plumb IV dm crypt: wipe private IV struct after key invalid flag is set dm integrity: use kzalloc() instead of kmalloc() + memset() dm: update stale comment in end_clone_bio() dm log writes: fix incorrect comment about the logged sequence example dm log writes: use struct_size() to calculate size of pending_block dm crypt: use struct_size() when allocating encryption context dm integrity: always set version on superblock update dm thin metadata: check if in fail_io mode when setting needs_check
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Some small fixes for various things, nothing huge, mostly found by automated tools. Plus add a driver that allows Linux to act as an IPMB slave device, so it can be a satellite MC in an IPMI network" * tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi: docs: ipmb: place it at driver-api and convert to ReST fix platform_no_drv_owner.cocci warnings ipmi: ipmb: don't allocate i2c_client on stack ipmi: ipmb: Fix build error while CONFIG_I2C is set to m Add support for IPMB driver drivers: ipmi: Drop device reference ipmi_ssif: fix unexpected driver unregister warning ipmi_si: use bool type for initialized variable ipmi_si: fix unexpected driver unregister warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - an update to Elan touchpad SMBus driver to fetch device parameters (size, resolution) while it is still in PS/2 mode, before switching over to SMBus, as in that mode some devices return garbage dimensions - update to iforce joystick driver - miscellaneous driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits) Input: gpio_keys_polled - allow specifying name of input device Input: edt-ft5x06 - simplify event reporting code Input: max77650-onkey - add MODULE_ALIAS() Input: atmel_mxt_ts - fix leak in mxt_update_cfg() Input: synaptics - enable SMBUS on T480 thinkpad trackpad Input: atmel_mxt_ts - fix -Wunused-const-variable Input: joydev - extend absolute mouse detection HID: quirks: Refactor ELAN 400 and 401 handling Input: elan_i2c - export the device id whitelist Input: edt-ft5x06 - use get_unaligned_be16() Input: iforce - add the Saitek R440 Force Wheel Input: iforce - use unaligned accessors, where appropriate Input: iforce - drop couple of temps from transport code Input: iforce - drop bus type from iforce structure Input: iforce - use DMA-safe buffores for USB transfers Input: iforce - allow callers supply data buffer when fetching device IDs Input: iforce - only call iforce_process_packet() if initialized Input: iforce - signal command completion from transport code Input: iforce - do not combine arguments for iforce_process_packet() Input: iforce - factor out hat handling when parsing packets ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: "This contains: - Support for recvmsg/sendmsg as first class opcodes. I don't envision going much further down this path, as there are plans in progress to support potentially any system call in an async fashion through io_uring. But I think it does make sense to have certain core ops available directly, especially those that can support a "try this non-blocking" flag/mode. (me) - Handle generic short reads automatically. This can happen fairly easily if parts of the buffered read is cached. Since the application needs to issue another request for the remainder, just do this internally and save kernel/user roundtrip while providing a nicer more robust API. (me) - Support for linked SQEs. This allows SQEs to depend on each other, enabling an application to eg queue a read-from-this-file,write-to-that-file pair. (me) - Fix race in stopping SQ thread (Jackie)" * tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block: io_uring: fix io_sq_thread_stop running in front of io_sq_thread io_uring: add support for recvmsg() io_uring: add support for sendmsg() io_uring: add support for sqe links io_uring: punt short reads to async context uio: make import_iovec()/compat_import_iovec() return bytes on success
-
Eric Biggers authored
Commit 0e5a610b ("ppp: mppe: switch to RC4 library interface"), which was merged through the crypto tree for v5.3, changed ppp_mppe.c to use the new arc4_crypt() library function rather than access RC4 through the dynamic crypto_skcipher API. Meanwhile commit aad1dcc4 ("ppp: mppe: Add softdep to arc4") was merged through the net tree and added a module soft-dependency on "arc4". The latter commit no longer makes sense because the code now uses the "libarc4" module rather than "arc4", and also due to the direct use of arc4_crypt(), no module soft-dependency is required. So revert the latter commit. Cc: Takashi Iwai <tiwai@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set removes some unnecessary debugfs error handling, and checks that lowcomms workqueues are not NULL before destroying" * tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: no need to check return value of debugfs_create functions dlm: check if workqueues are NULL before flushing/destroying
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Two small fixes to properly cleanup the 9p transports list if virtio/xen module initialization fail. 9p might otherwise try to access memory from a module that failed to register got freed" * tag '9p-for-5.3' of git://github.com/martinetd/linux: 9p/xen: Add cleanup path in p9_trans_xen_init 9p/virtio: Add cleanup path in p9_virtio_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've introduced native swap file support which can exploit DIO, enhanced existing checkpoint=disable feature with additional mount option to tune the triggering condition, and allowed user to preallocate physical blocks in a pinned file which will be useful to avoid f2fs fragmentation in append-only workloads. In addition, we've fixed subtle quota corruption issue. Enhancements: - add swap file support which uses DIO - allocate blocks for pinned file - allow SSR and mount option to enhance checkpoint=disable - enhance IPU IOs - add more sanity checks such as memory boundary access Bug fixes: - quota corruption in very corner case of error-injected SPO case - fix root_reserved on remount and some wrong counts - add missing fsck flag Some patches were also introduced to clean up ambiguous i_flags and debugging messages codes" * tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits) f2fs: improve print log in f2fs_sanity_check_ckpt() f2fs: avoid out-of-range memory access f2fs: fix to avoid long latency during umount f2fs: allow all the users to pin a file f2fs: support swap file w/ DIO f2fs: allocate blocks for pinned file f2fs: fix is_idle() check for discard type f2fs: add a rw_sem to cover quota flag changes f2fs: set SBI_NEED_FSCK for xattr corruption case f2fs: use generic EFSBADCRC/EFSCORRUPTED f2fs: Use DIV_ROUND_UP() instead of open-coding f2fs: print kernel message if filesystem is inconsistent f2fs: introduce f2fs_<level> macros to wrap f2fs_printk() f2fs: avoid get_valid_blocks() for cleanup f2fs: ioctl for removing a range from F2FS f2fs: only set project inherit bit for directory f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags f2fs: replace ktype default_attrs with default_groups f2fs: Add option to limit required GC for checkpoint=disable f2fs: Fix accounting for unusable blocks ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Darrick Wong: "In this release there are a significant amounts of consolidations and cleanups in the log code; restructuring of the log to issue struct bios directly; new bulkstat ioctls to return v5 fs inode information (and fix all the padding problems of the old ioctl); the beginnings of multithreaded inode walks (e.g. quotacheck); and a reduction in memory usage in the online scrub code leading to reduced runtimes. - Refactor inode geometry calculation into a single structure instead of open-coding pieces everywhere. - Add online repair to build options. - Remove unnecessary function call flags and functions. - Claim maintainership of various loose xfs documentation and header files. - Use struct bio directly for log buffer IOs instead of struct xfs_buf. - Reduce log item boilerplate code requirements. - Merge log item code spread across too many files. - Further distinguish between log item commits and cancellations. - Various small cleanups to the ag small allocator. - Support cgroup-aware writeback - libxfs refactoring for mkfs cleanup - Remove unneeded #includes - Fix a memory allocation miscalculation in the new log bio code - Fix bisection problems - Fix a crash in ioend processing caused by tripping over freeing of preallocated transactions - Split out a generic inode walk mechanism from the bulkstat code, hook up all the internal users to use the walking code, then clean up bulkstat to serve only the bulkstat ioctls. - Add a multithreaded iwalk implementation to speed up quotacheck on fast storage with many CPUs. - Remove unnecessary return values in logging teardown functions. - Supplement the bstat and inogrp structures with new bulkstat and inumbers structures that have all the fields we need for v5 filesystem features and none of the padding problems of their predecessors. - Wire up new ioctls that use the new structures with a much simpler bulk_ireq structure at the head instead of the pointerhappy mess we had before. - Enable userspace to constrain bulkstat returns to a single AG or a single special inode so that we can phase out a lot of geometry guesswork in userspace. - Reduce memory consumption and zeroing overhead in extended attribute scrub code. - Fix some behavioral regressions in the new bulkstat backend code. - Fix some behavioral regressions in the new log bio code" * tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits) xfs: chain bios the right way around in xfs_rw_bdev xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk xfs: don't update lastino for FSBULKSTAT_SINGLE xfs: online scrub needn't bother zeroing its temporary buffer xfs: only allocate memory for scrubbing attributes when we need it xfs: refactor attr scrub memory allocation function xfs: refactor extended attribute buffer pointer functions xfs: attribute scrub should use seen_enough to pass error values xfs: allow single bulkstat of special inodes xfs: specify AG in bulk req xfs: wire up the v5 inumbers ioctl xfs: wire up new v5 bulkstat ioctls xfs: introduce v5 inode group structure xfs: introduce new v5 bulkstat structure xfs: rename bulkstat functions xfs: remove various bulk request typedef usage fs: xfs: xfs_log: Change return type from int to void xfs: poll waiting for quotacheck xfs: multithreaded iwalk implementation xfs: refactor INUMBERS to use iwalk functions ...
-
- 12 Jul, 2019 21 commits
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong: "Here's a patch series that sets up common parameter checking functions for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations. The goal here is to reduce the amount of behaviorial variance between the filesystems where those ioctls originated (ext2 and XFS, respectively) and everybody else. - Standardize parameter checking for the SETFLAGS and FSSETXATTR ioctls (which were the file attribute setters for ext4 and xfs and have now been hoisted to the vfs) - Only allow the DAX flag to be set on files and directories" * tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: only allow FSSETXATTR to set DAX flag on files and dirs vfs: teach vfs_ioc_fssetxattr_check to check extent size hints vfs: teach vfs_ioc_fssetxattr_check to check project id info vfs: create a generic checking function for FS_IOC_FSSETXATTR vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "This Kselftest update for Linux 5.3-rc1 consists of build failure fixes and minor code cleaning patch to remove duplicate headers" * tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: rseq/selftests: Fix Thumb mode build failure on arm32 kselftests: cgroup: remove duplicated include from test_freezer.c selftests: timestamping: Fix SIOCGSTAMP undeclared build failure selftests: dma-buf: Adding kernel config fragment CONFIG_UDMABUF=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kconfig updates from Masahiro Yamada: - always require argument for --defconfig and remove the hard-coded arch/$(ARCH)/defconfig path - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig - some code cleanups * tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove meaningless if-conditional in conf_read() kconfig: Fix spelling of sym_is_changable unicore32: rename unicore32_defconfig to defconfig kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG kconfig: add static qualifier to expand_string() kconfig: require the argument of --defconfig kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-genericLinus Torvalds authored
Pull asm-generic updates from Arnd Bergmann: "The asm-generic changes for 5.3 consist of a cleanup series to remove ptrace.h from Christoph Hellwig, who explains: 'asm-generic/ptrace.h is a little weird in that it doesn't actually implement any functionality, but it provided multiple layers of macros that just implement trivial inline functions. We implement those directly in the few architectures and be off with a much simpler design.' at https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/" * tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: remove ptrace.h x86: don't use asm-generic/ptrace.h sh: don't use asm-generic/ptrace.h powerpc: don't use asm-generic/ptrace.h arm64: don't use asm-generic/ptrace.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull more s390 updates from Vasily Gorbik: - Fix integer overflow during stack frame unwind with invalid backchain. - Cleanup unused symbol export in zcrypt code. - Fix MIO addressing control activation in PCI code and expose its usage via sysfs. - Fix kernel image signature verification report presence detection. - Fix irq registration in vfio-ap code. - Add CPU measurement counters for newer machines. - Add base DASD thin provisioning support and code cleanups. * tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/unwind: avoid int overflow in outside_of_stack s390/zcrypt: remove the exporting of ap_query_configuration s390/pci: add mio_enabled attribute s390: fix setting of mio addressing control s390/ipl: Fix detection of has_secure attribute s390: vfio-ap: fix irq registration s390/cpumf: Add extended counter set definitions for model 8561 and 8562 s390/dasd: Handle out-of-space constraint s390/dasd: Add discard support for ESE volumes s390/dasd: Use ALIGN_DOWN macro s390/dasd: Make dasd_setup_queue() a discipline function s390/dasd: Add new ioctl to release space s390/dasd: Add dasd_sleep_on_queue_interruptible() s390/dasd: Add missing intensity definition s390/dasd: Fix whitespace s390/dasd: Add dynamic formatting support for ESE volumes s390/dasd: Recognise data for ESE volumes s390/dasd: Put sub-order definitions in a separate section s390/dasd: Make layout analysis ESE compatible s390/dasd: Remove old defines and function ...
-
Christian Lamparter authored
This patch replaces the legacy bulk gpio.h include with the proper gpio/consumer.h variant. This was caught by the kbuild test robot that was running into an error because of this. For more information why linux/gpio.h is bad can be found in: commit 56a46b61 ("gpio: Clarify that <linux/gpio.h> is legacy") Reported-by: kbuild test robot <lkp@intel.com> Link: https://www.spinics.net/lists/netdev/msg584447.html Fixes: a653f2f5 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull arch/nios2 updates from Ley Foon Tan. * tag 'nios2-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: configs: Remove useless UEVENT_HELPER_PATH nios2: remove pointless second entry for CONFIG_TRACE_IRQFLAGS_SUPPORT
-
Jiangfeng Xiao authored
Use devm_platform_ioremap_resource instead of devm_ioremap_resource. Make the code simpler. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several hundred kilobytes of kernel stack space. One gets inlined into the other, which causes the stack usage to be combined beyond the warning limit when building with clang: drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=] Restructuring cudbg_collect_mem_region() lets clang do the same optimization that gcc does and reuse the stack slots as it can see that the large variables are never used together. A better fix might be to avoid using cudbg_meminfo on the stack altogether, but that requires a larger rewrite. Fixes: a1c69520 ("cxgb4: collect MC memory dump") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "ARM: - support for chained PMU counters in guests - improved SError handling - handle Neoverse N1 erratum #1349291 - allow side-channel mitigation status to be migrated - standardise most AArch64 system register accesses to msr_s/mrs_s - fix host MPIDR corruption on 32bit - selftests ckleanups x86: - PMU event {white,black}listing - ability for the guest to disable host-side interrupt polling - fixes for enlightened VMCS (Hyper-V pv nested virtualization), - new hypercall to yield to IPI target - support for passing cstate MSRs through to the guest - lots of cleanups and optimizations Generic: - Some txt->rST conversions for the documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits) Documentation: virtual: Add toctree hooks Documentation: kvm: Convert cpuid.txt to .rst Documentation: virtual: Convert paravirt_ops.txt to .rst KVM: x86: Unconditionally enable irqs in guest context KVM: x86: PMU Event Filter kvm: x86: Fix -Wmissing-prototypes warnings KVM: Properly check if "page" is valid in kvm_vcpu_unmap KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane kvm: LAPIC: write down valid APIC registers KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register KVM: arm/arm64: Add save/restore support for firmware workaround state arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests KVM: arm/arm64: Support chained PMU counters KVM: arm/arm64: Remove pmc->bitmask KVM: arm/arm64: Re-create event when setting counter value KVM: arm/arm64: Extract duplicated code to own function KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions KVM: LAPIC: ARBPRI is a reserved register for x2APIC ...
-
Chris Packham authored
tipc_named_node_up() creates a skb list. It passes the list to tipc_node_xmit() which has some code paths that can call skb_queue_purge() which relies on the list->lock being initialised. The spin_lock is only needed if the messages end up on the receive path but when the list is created in tipc_named_node_up() we don't necessarily know if it is going to end up there. Once all the skb list users are updated in tipc it will then be possible to update them to use the unlocked variants of the skb list functions and initialise the lock when we know the message will follow the receive path. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
- Added mask upper bound test case - Added mask validation test case - Added mask replacement case Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Hurley says: ==================== Fix bugs in NFP flower match offload This patchset contains bug fixes for corner cases in the match fields of flower offloads. The patches ensure that flows that should not be supported are not (incorrectly) offloaded. These include rules that match on layer 3 and/or 4 data without specified ethernet or ip protocol fields. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Hurley authored
Flower rules on the NFP firmware are able to match on an IP protocol field. When parsing rules in the driver, unknown IP protocols are only rejected when further matches are to be carried out on layer 4 fields, as the firmware will not be able to extract such fields from packets. L4 protocol dissectors such as FLOW_DISSECTOR_KEY_PORTS are only parsed if an IP protocol is specified. This leaves a loophole whereby a rule that attempts to match on transport layer information such as port numbers but does not explicitly give an IP protocol type can be incorrectly offloaded (in this case with wildcard port numbers matches). Fix this by rejecting the offload of flows that attempt to match on L4 information, not only when matching on an unknown IP protocol type, but also when the protocol is wildcarded. Fixes: 2a047845 ("nfp: flower: check L4 matches on unknown IP protocols") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Hurley authored
NFP firmware does not explicitly match on an ethernet type field. Rather, each rule has a bitmask of match fields that can be used to infer the ethernet type. Currently, if a flower rule contains an unknown ethernet type, a check is carried out for matches on other fields of the packet. If matches on layer 3 or 4 are found, then the offload is rejected as firmware will not be able to extract these fields from a packet with an ethernet type it does not currently understand. However, if a rule contains an unknown ethernet type without any L3 (or above) matches then this will effectively be offloaded as a rule with a wildcarded ethertype. This can lead to misclassifications on the firmware. Fix this issue by rejecting all flower rules that specify a match on an unknown ethernet type. Further ensure correct offloads by moving the 'L3 and above' check to any rule that does not specify an ethernet type and rejecting rules with further matches. This means that we can still offload rules with a wildcarded ethertype if they only match on L2 fields but will prevent rules which match on further fields that we cannot be sure if the firmware will be able to extract. Fixes: af9d842c ("nfp: extend flower add flow offload") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull hyper-v updates from Sasha Levin: - Add a module description to the Hyper-V vmbus module. - Rework some vmbus code to separate architecture specifics out to arch/x86/. This is part of the work of adding arm64 support to Hyper-V. * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h drivers: hv: Add a module description line to the hv_vmbus driver
-
Vlad Buslov authored
Recent refactoring of tc block offloads infrastructure introduced new flow_block_cb_setup_simple() method intended to be used as unified way for all drivers to register offload callbacks. However, commit that actually extended all users (drivers) with block cb list and provided it to flow_block infra missed mlx5 en_rep. This leads to following NULL-pointer dereference when creating Qdisc: [ 278.385175] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 278.393233] #PF: supervisor read access in kernel mode [ 278.399446] #PF: error_code(0x0000) - not-present page [ 278.405847] PGD 8000000850e73067 P4D 8000000850e73067 PUD 8620cd067 PMD 0 [ 278.414141] Oops: 0000 [#1] SMP PTI [ 278.419019] CPU: 7 PID: 3369 Comm: tc Not tainted 5.2.0-rc6+ #492 [ 278.426580] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 278.435853] RIP: 0010:flow_block_cb_setup_simple+0xc4/0x190 [ 278.442953] Code: 10 48 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 49 89 00 48 05 00 01 00 00 49 89 40 08 31 c0 c3 b8 a1 ff ff ff c3 f3 c3 <48> 8b 06 48 39 c6 75 0a eb 1a 48 8b 00 48 39 c6 74 12 48 3b 50 28 [ 278.464829] RSP: 0018:ffffaf07c3f97990 EFLAGS: 00010246 [ 278.471648] RAX: 0000000000000000 RBX: ffff9b43ed4c7680 RCX: ffff9b43d5f80840 [ 278.480408] RDX: ffffffffc0491650 RSI: 0000000000000000 RDI: ffffaf07c3f97998 [ 278.489110] RBP: ffff9b43ddff9000 R08: ffff9b43d5f80840 R09: 0000000000000001 [ 278.497838] R10: 0000000000000009 R11: 00000000000003ad R12: ffffaf07c3f97c08 [ 278.506595] R13: ffff9b43d5f80000 R14: ffff9b43ed4c7680 R15: ffff9b43dfa20b40 [ 278.515374] FS: 00007f796be1b400(0000) GS:ffff9b43ef840000(0000) knlGS:0000000000000000 [ 278.525099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 278.532453] CR2: 0000000000000000 CR3: 0000000840398002 CR4: 00000000001606e0 [ 278.541197] Call Trace: [ 278.545252] tcf_block_offload_cmd.isra.52+0x7e/0xb0 [ 278.551871] tcf_block_get_ext+0x365/0x3e0 [ 278.557569] qdisc_create+0x15c/0x4e0 [ 278.562859] ? kmem_cache_alloc_trace+0x1a2/0x1c0 [ 278.569235] tc_modify_qdisc+0x1c8/0x780 [ 278.574761] rtnetlink_rcv_msg+0x291/0x340 [ 278.580518] ? _cond_resched+0x15/0x40 [ 278.585856] ? rtnl_calcit.isra.29+0x120/0x120 [ 278.591868] netlink_rcv_skb+0x4a/0x110 [ 278.597198] netlink_unicast+0x1a0/0x250 [ 278.602601] netlink_sendmsg+0x2c1/0x3c0 [ 278.608022] sock_sendmsg+0x5b/0x60 [ 278.612969] ___sys_sendmsg+0x289/0x310 [ 278.618231] ? do_wp_page+0x99/0x730 [ 278.623216] ? page_add_new_anon_rmap+0xbe/0x140 [ 278.629298] ? __handle_mm_fault+0xc84/0x1360 [ 278.635113] ? __sys_sendmsg+0x5e/0xa0 [ 278.640285] __sys_sendmsg+0x5e/0xa0 [ 278.645239] do_syscall_64+0x5b/0x1b0 [ 278.650274] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 278.656697] RIP: 0033:0x7f796abdeb87 [ 278.661628] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00 00 00 53 48 89 f3 48 [ 278.683248] RSP: 002b:00007ffde213ba48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 278.692245] RAX: ffffffffffffffda RBX: 000000005d261e6f RCX: 00007f796abdeb87 [ 278.700862] RDX: 0000000000000000 RSI: 00007ffde213bab0 RDI: 0000000000000003 [ 278.709527] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 278.718167] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 [ 278.726743] R13: 000000000067b580 R14: 0000000000000000 R15: 0000000000000000 [ 278.735302] Modules linked in: dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc mlx5_ib ib_uverbs intel_rapl ib_core sb_edac x86_pkg_temp_ thermal intel_powerclamp coretemp kvm_intel kvm mlx5_core irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel igb ghash_clmulni_intel ses mei_me enclosure mlxfw ipmi_ssif intel_cstate iTCO_wdt ptp mei pps_core iTCO_vendor_support pcspkr joydev intel_uncore i2c_i801 ipmi_si lpc_ich intel_rapl_perf ioatdma wmi dca pcc_cpufreq ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_k ms_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 278.802263] CR2: 0000000000000000 [ 278.807170] ---[ end trace b1f0a442a279e66f ]--- Extend en_rep with new static mlx5e_rep_block_cb_list list and pass it to flow_block_cb_setup_simple() function instead of hardcoded NULL pointer. Fixes: 955bcb6e ("drivers: net: use flow block API") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Efremov authored
The variables phy_basic_ports_array, phy_fibre_port_array and phy_all_ports_features_array are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the variables were decided to be a part of API, this commit removes the static attributes and adds the declarations to the header. Fixes: 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
After recent refactoring of block offlads infrastructure, indr_dev->block pointer is dereferenced before it is verified to be non-NULL. Example stack trace where this behavior leads to NULL-pointer dereference error when creating vxlan dev on system with mlx5 NIC with offloads enabled: [ 1157.852938] ================================================================== [ 1157.866877] BUG: KASAN: null-ptr-deref in tc_indr_block_ing_cmd.isra.41+0x9c/0x160 [ 1157.880877] Read of size 4 at addr 0000000000000090 by task ip/3829 [ 1157.901637] CPU: 22 PID: 3829 Comm: ip Not tainted 5.2.0-rc6+ #488 [ 1157.914438] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1157.929031] Call Trace: [ 1157.938318] dump_stack+0x9a/0xeb [ 1157.948362] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160 [ 1157.960262] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160 [ 1157.972082] __kasan_report+0x176/0x192 [ 1157.982513] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160 [ 1157.994348] kasan_report+0xe/0x20 [ 1158.004324] tc_indr_block_ing_cmd.isra.41+0x9c/0x160 [ 1158.015950] ? tcf_block_setup+0x430/0x430 [ 1158.026558] ? kasan_unpoison_shadow+0x30/0x40 [ 1158.037464] __tc_indr_block_cb_register+0x5f5/0xf20 [ 1158.049288] ? mlx5e_rep_indr_tc_block_unbind+0xa0/0xa0 [mlx5_core] [ 1158.062344] ? tc_indr_block_dev_put.part.47+0x5c0/0x5c0 [ 1158.074498] ? rdma_roce_rescan_device+0x20/0x20 [ib_core] [ 1158.086580] ? br_device_event+0x98/0x480 [bridge] [ 1158.097870] ? strcmp+0x30/0x50 [ 1158.107578] mlx5e_nic_rep_netdevice_event+0xdd/0x180 [mlx5_core] [ 1158.120212] notifier_call_chain+0x6d/0xa0 [ 1158.130753] register_netdevice+0x6fc/0x7e0 [ 1158.141322] ? netdev_change_features+0xa0/0xa0 [ 1158.152218] ? vxlan_config_apply+0x210/0x310 [vxlan] [ 1158.163593] __vxlan_dev_create+0x2ad/0x520 [vxlan] [ 1158.174770] ? vxlan_changelink+0x490/0x490 [vxlan] [ 1158.185870] ? rcu_read_unlock+0x60/0x60 [vxlan] [ 1158.196798] vxlan_newlink+0x99/0xf0 [vxlan] [ 1158.207303] ? __vxlan_dev_create+0x520/0x520 [vxlan] [ 1158.218601] ? rtnl_create_link+0x3d0/0x450 [ 1158.228900] __rtnl_newlink+0x8a7/0xb00 [ 1158.238701] ? stack_access_ok+0x35/0x80 [ 1158.248450] ? rtnl_link_unregister+0x1a0/0x1a0 [ 1158.258735] ? find_held_lock+0x6d/0xd0 [ 1158.268379] ? is_bpf_text_address+0x67/0xf0 [ 1158.278330] ? lock_acquire+0xc1/0x1f0 [ 1158.287686] ? is_bpf_text_address+0x5/0xf0 [ 1158.297449] ? is_bpf_text_address+0x86/0xf0 [ 1158.307310] ? kernel_text_address+0xec/0x100 [ 1158.317155] ? arch_stack_walk+0x92/0xe0 [ 1158.326497] ? __kernel_text_address+0xe/0x30 [ 1158.336213] ? unwind_get_return_address+0x2f/0x50 [ 1158.346267] ? create_prof_cpu_mask+0x20/0x20 [ 1158.355936] ? arch_stack_walk+0x92/0xe0 [ 1158.365117] ? stack_trace_save+0x8a/0xb0 [ 1158.374272] ? stack_trace_consume_entry+0x80/0x80 [ 1158.384226] ? match_held_lock+0x33/0x210 [ 1158.393216] ? kasan_unpoison_shadow+0x30/0x40 [ 1158.402593] rtnl_newlink+0x53/0x80 [ 1158.410925] rtnetlink_rcv_msg+0x3a5/0x600 [ 1158.419777] ? validate_linkmsg+0x400/0x400 [ 1158.428620] ? find_held_lock+0x6d/0xd0 [ 1158.437117] ? match_held_lock+0x1b/0x210 [ 1158.445760] ? validate_linkmsg+0x400/0x400 [ 1158.454642] netlink_rcv_skb+0xc7/0x1f0 [ 1158.463150] ? netlink_ack+0x470/0x470 [ 1158.471538] ? netlink_deliver_tap+0x1f3/0x5a0 [ 1158.480607] netlink_unicast+0x2ae/0x350 [ 1158.489099] ? netlink_attachskb+0x340/0x340 [ 1158.497935] ? _copy_from_iter_full+0xde/0x3b0 [ 1158.506945] ? __virt_addr_valid+0xb6/0xf0 [ 1158.515578] ? __check_object_size+0x159/0x240 [ 1158.524515] netlink_sendmsg+0x4d3/0x630 [ 1158.532879] ? netlink_unicast+0x350/0x350 [ 1158.541400] ? netlink_unicast+0x350/0x350 [ 1158.549805] sock_sendmsg+0x94/0xa0 [ 1158.557561] ___sys_sendmsg+0x49d/0x570 [ 1158.565625] ? copy_msghdr_from_user+0x210/0x210 [ 1158.574457] ? __fput+0x1e2/0x330 [ 1158.581948] ? __kasan_slab_free+0x130/0x180 [ 1158.590407] ? kmem_cache_free+0xb6/0x2d0 [ 1158.598574] ? mark_lock+0xc7/0x790 [ 1158.606177] ? task_work_run+0xcf/0x100 [ 1158.614165] ? exit_to_usermode_loop+0x102/0x110 [ 1158.622954] ? __lock_acquire+0x963/0x1ee0 [ 1158.631199] ? lockdep_hardirqs_on+0x260/0x260 [ 1158.639777] ? match_held_lock+0x1b/0x210 [ 1158.647918] ? lockdep_hardirqs_on+0x260/0x260 [ 1158.656501] ? match_held_lock+0x1b/0x210 [ 1158.664643] ? __fget_light+0xa6/0xe0 [ 1158.672423] ? __sys_sendmsg+0xd2/0x150 [ 1158.680334] __sys_sendmsg+0xd2/0x150 [ 1158.688063] ? __ia32_sys_shutdown+0x30/0x30 [ 1158.696435] ? lock_downgrade+0x2e0/0x2e0 [ 1158.704541] ? mark_held_locks+0x1a/0x90 [ 1158.712611] ? mark_held_locks+0x1a/0x90 [ 1158.720619] ? do_syscall_64+0x1e/0x2c0 [ 1158.728530] do_syscall_64+0x78/0x2c0 [ 1158.736254] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1158.745414] RIP: 0033:0x7f62d505cb87 [ 1158.753070] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00[87/1817] 48 89 f3 48 [ 1158.780924] RSP: 002b:00007fffd9832268 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1158.793204] RAX: ffffffffffffffda RBX: 000000005d26048f RCX: 00007f62d505cb87 [ 1158.805111] RDX: 0000000000000000 RSI: 00007fffd98322d0 RDI: 0000000000000003 [ 1158.817055] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1158.828987] R10: 00007f62d50ce260 R11: 0000000000000246 R12: 0000000000000001 [ 1158.840909] R13: 000000000067e540 R14: 0000000000000000 R15: 000000000067ed20 [ 1158.852873] ================================================================== Introduce new function tcf_block_non_null_shared() that verifies block pointer before dereferencing it to obtain index. Use the function in tc_indr_block_ing_cmd() to prevent NULL pointer dereference. Fixes: 955bcb6e ("drivers: net: use flow block API") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
dma_addr_t may be 64-bit wide on 32-bit architectures, so it is not valid to cast between it and a pointer: drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_si': drivers/net/ethernet/ti/davinci_cpdma.c:1047:12: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_idle_submit_mapped': drivers/net/ethernet/ti/davinci_cpdma.c:1114:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_mapped': drivers/net/ethernet/ti/davinci_cpdma.c:1164:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] Solve this by using two separate members in 'struct submit_info'. Since this avoids the use of the 'flag' member, the structure does not even grow in typical configurations. Fixes: 6670acac ("net: ethernet: ti: davinci_cpdma: add dma mapped submit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-