Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.11

1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.

Merge tag 'kvm-s390-next-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Assortment of tiny fixes which are not time critical:
- Rejecting memory region operations for ucontrol mode VMs
- Rewind the PSW on host intercepts for VSIE
- Remove unneeded include

KVM/riscv changes for 6.11

- Redirect AMO load/store access fault traps to guest
- Perf kvm stat support for RISC-V
- Use guest files for IMSIC virtualization, when available

ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.

Pre-population has been requested several times to mitigate KVM page faults
during guest boot or after live migration.  It is also required by TDX
before filling in the initial guest memory with measured contents.
Introduce it as a generic API.

Add a test case to exercise KVM_PRE_FAULT_MEMORY and run the guest to access the
pre-populated area.  It tests KVM_PRE_FAULT_MEMORY ioctl for KVM_X86_DEFAULT_VM
and KVM_X86_SW_PROTECTED_VM.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <32427791ef42e5efaafb05d2ac37fa4372715f47.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Wire KVM_PRE_FAULT_MEMORY ioctl to kvm_mmu_do_page_fault() to populate guest
memory.  It can be called right after KVM_CREATE_VCPU creates a vCPU,
since at that point kvm_mmu_create() and kvm_init_mmu() are called and
the vCPU is ready to invoke the KVM page fault handler.

The helper function kvm_tdp_map_page() takes care of the logic to
process RET_PF_* return values and convert them to success or errno.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9b866a0ae7147f96571c439e75429a03dcb659b6.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The guest memory population logic will need to know what page size or level
(4K, 2M, ...) is mapped.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <eabc3f3e5eb03b370cadf6e1901ea34d7a020adc.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move the accounting of the result of kvm_mmu_do_page_fault() to its
callers, as only pf_fixed is common to guest page faults and async #PFs,
and upcoming support KVM_PRE_FAULT_MEMORY won't bump _any_ stats.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Account stat.pf_taken in kvm_mmu_page_fault(), i.e. the actual page fault
handler, instead of conditionally bumping it in kvm_mmu_do_page_fault().
The "real" page fault handler is the only path that should ever increment
the number of taken page faults, as all other paths that "do page fault"
are by definition not handling faults that occurred in the guest.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a new ioctl KVM_PRE_FAULT_MEMORY in the KVM common code. It iterates on the
memory range and calls the arch-specific function.  The implementation is
optional and enabled by a Kconfig symbol.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <819322b8f25971f2b9933bfa4506e618508ad782.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Adds documentation of KVM_PRE_FAULT_MEMORY ioctl. [1]

It populates guest memory.  It doesn't do extra operations on the
underlying technology-specific initialization [2].  For example,
CoCo-related operations won't be performed.  Concretely for TDX, this API
won't invoke TDH.MEM.PAGE.ADD() or TDH.MR.EXTEND().  Vendor-specific APIs
are required for such operations.

The key point is to adapt of vcpu ioctl instead of VM ioctl.  First,
populating guest memory requires vcpu.  If it is VM ioctl, we need to pick
one vcpu somehow.  Secondly, vcpu ioctl allows each vcpu to invoke this
ioctl in parallel.  It helps to scale regarding guest memory size, e.g.,
hundreds of GB.

[1] https://lore.kernel.org/kvm/Zbrj5WKVgMsUFDtb@google.com/
[2] https://lore.kernel.org/kvm/Ze-TJh0BBOWm9spT@google.com/Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <9a060293c9ad9a78f1d8994cfe1311e818e99257.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A rename and refactoring extracted from the preparatory series for
Intel TDX support in KVM's MMU.

The flags AS_UNMOVABLE and AS_INACCESSIBLE were both added just for guest_memfd;
AS_UNMOVABLE is already in existing versions of Linux, while AS_INACCESSIBLE was
acked for inclusion in 6.11.

But really, they are the same thing: only guest_memfd uses them, at least for
now, and guest_memfd pages are unmovable because they should not be
accessed by the CPU.

So merge them into one; use the AS_INACCESSIBLE name which is more comprehensive.
At the same time, this fixes an embarrassing bug where AS_INACCESSIBLE was used
as a bit mask, despite it being just a bit index.

The bug was mostly benign, because AS_INACCESSIBLE's bit representation (1010)
corresponded to setting AS_UNEVICTABLE (which is already set) and AS_ENOSPC
(except no async writes can happen on the guest_memfd).  So the AS_INACCESSIBLE
flag simply had no effect.

Fixes: 1d23040c ("KVM: guest_memfd: Use AS_INACCESSIBLE when creating guest_memfd inode")
Fixes: c72ceafb ("mm: Introduce AS_INACCESSIBLE for encrypted/confidential memory")
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add support for 'perf kvm stat' on loongarch64 platform, now only kvm
exit event is supported.

Here is example output about "perf kvm --host stat report" command

   Event name   Samples   Sample%     Time (ns)   Time%   Mean Time (ns)
    Mem Store     83969    51.00%     625697070   8.00%             7451
     Mem Read     37641    22.00%     112485730   1.00%             2988
    Interrupt     15542     9.00%      20620190   0.00%             1326
        IOCSR     15207     9.00%      94296190   1.00%             6200
    Hypercall      4873     2.00%      12265280   0.00%             2516
         Idle      3713     2.00%    6322055860  87.00%          1702681
          FPU      1819     1.00%       2750300   0.00%             1511
   Inst Fetch       502     0.00%       1341740   0.00%             2672
   Mem Modify       324     0.00%        602240   0.00%             1858
       CPUCFG        55     0.00%         77610   0.00%             1411
          CSR        12     0.00%         19690   0.00%             1640
         LASX         3     0.00%          4870   0.00%             1623
          LSX         2     0.00%          2100   0.00%             1050
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Per-cpu struct kvm_steal_time is added here, its size is 64 bytes and
also defined as 64 bytes, so that the whole structure is in one physical
page.

When a VCPU is online, function pv_enable_steal_time() is called. This
function will pass guest physical address of struct kvm_steal_time and
tells hypervisor to enable steal time. When a vcpu is offline, physical
address is set as 0 and tells hypervisor to disable steal time.

Here is an output of vmstat on guest when there is workload on both host
and guest. It shows steal time stat information.

procs -----------memory---------- -----io---- -system-- ------cpu-----
 r  b   swpd   free  inact active   bi    bo   in   cs us sy id wa st
15  1      0 7583616 184112  72208    20    0  162   52 31  6 43  0 20
17  0      0 7583616 184704  72192    0     0 6318 6885  5 60  8  5 22
16  0      0 7583616 185392  72144    0     0 1766 1081  0 49  0  1 50
16  0      0 7583616 184816  72304    0     0 6300 6166  4 62 12  2 20
18  0      0 7583632 184480  72240    0     0 2814 1754  2 58  4  1 35
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add ParaVirt steal time feature in host side, VM can search supported
features provided by KVM hypervisor, a feature KVM_FEATURE_STEAL_TIME
is added here. Like x86, steal time structure is saved in guest memory,
one hypercall function KVM_HCALL_FUNC_NOTIFY is added to notify KVM to
enable this feature.

One CPU attr ioctl command KVM_LOONGARCH_VCPU_PVTIME_CTRL is added to
save and restore the base address of steal time structure when a VM is
migrated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

It seems redundant to check if pte is young before the call to
kvm_pte_mkyoung() in kvm_map_page_fast(). Just remove the check.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Jia Qingtong <jiaqingtong97@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Function kvm_map_page_fast() is fast path of secondary mmu page fault
flow, pfn is parsed from secondary mmu page table walker. However the
corresponding page reference is not added, it is dangerious to access
page out of mmu_lock.

Here page ref is added inside mmu_lock, function kvm_set_pfn_accessed()
and kvm_set_pfn_dirty() is called with page ref added, so that the page
will not be freed by others.

Also kvm_set_pfn_accessed() is removed here since it is called in the
following function kvm_release_pfn_clean().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add KVM_DIRTY_LOG_INITIALLY_SET support on LoongArch system, this
feature comes from other architectures like x86 and arm64.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When updating pmd entry such as allocating new pmd page or splitting
huge page into normal page, it is necessary to firstly update all pte
entries, and then update pmd entry.

It is weak order with LoongArch system, there will be problem if other
VCPUs see pmd update firstly while ptes are not updated. Here smp_wmb()
is added to assure this.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

For readonly memslot such as UEFI BIOS or UEFI var space, guest cannot
write this memory space directly. So it is not necessary to track dirty
pages for readonly memslot. Here we make such optimization in function
kvm_arch_commit_memory_region().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Currently page level selection about secondary mmu depends on memory
slot and page level about host mmu. There will be problems if page level
of secondary mmu is zero already. Huge page cannot be selected if there is
normal page mapped in secondary mmu already, since it is not supported to
merge normal pages into huge pages now.

So page level selection should depend on the following three conditions.
 1. Memslot is aligned for huge page and vm is not migrating.
 2. Page level of host mmu is also huge page.
 3. Page level of secondary mmu is suituable for huge page.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

With hardware assisted virtualization, there are two level HW mmu, one
is GVA to GPA mapping, the other is GPA to HPA mapping which is called
secondary mmu in generic. If there is page fault for secondary mmu,
there needs tlb flush operation indexed with fault GPA address and VMID.
VMID is stored at register CSR.GSTAT and will be reload or recalculated
before guest entry.

Currently CSR.GSTAT is not saved and restored during VCPU context
switch, instead it is recalculated during guest entry. So CSR.GSTAT is
effective only when a VCPU runs in guest mode, however it may not be
effective if the VCPU exits to host mode. Since register CSR.GSTAT may
be stale, it may records the VMID of the last schedule-out VCPU, rather
than the current VCPU.

Function kvm_flush_tlb_gpa() should be called with its real VMID, so
here move it to the guest entrance. Also an arch-specific request id
KVM_REQ_TLB_FLUSH_GPA is added to flush tlb for secondary mmu, and it
can be optimized if VMID is updated, since all guest tlb entries will
be invalid if VMID is updated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Currently interrupts are posted and cleared with the asynchronous mode,
meanwhile they are saved in SW state vcpu::arch::irq_pending and vcpu::
arch::irq_clear. When vcpu is ready to run, pending interrupt is written
back to CSR.ESTAT register from SW state vcpu::arch::irq_pending at the
guest entrance.

During VM migration stage, vcpu is put into stopped state, however
pending interrupts are not synced to CSR.ESTAT register. So there will
be interrupt lost when VCPU is migrated to another host machines.

Here in this patch when ESTAT CSR register is read from VMM user mode,
pending interrupts are synchronized to ESTAT also. So that VMM can get
correct pending interrupts.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull clk fixes from Stephen Boyd:
 "A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:

   - Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
     set the alpha enable bit and not set bits that don't exist

   - Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
     warnings

   - Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
     correct

   - Fix the min/max rate clamping logic in the Allwinner driver that
     got broken in v6.9

   - Limit runtime PM enabling in the Mediatek driver to only
     mt8183-mfgcfg so that system wide resume doesn't break on other
     Mediatek SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
  clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
  clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
  clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
  clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Pull powerpc fixes from Michael Ellerman:

 - Fix unnecessary copy to 0 when kernel is booted at address 0

 - Fix usercopy crash when dumping dtl via debugfs

 - Avoid possible crash when PCI hotplug races with error handling

 - Fix kexec crash caused by scv being disabled before other CPUs
   call-in

 - Fix powerpc selftests build with USERCFLAGS set

Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.

* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build with USERCFLAGS set
  powerpc/pseries: Fix scv instruction crash with kexec
  powerpc/eeh: avoid possible crash when edev->pdev changes
  powerpc/pseries: Whitelist dtl slub object for copying to userspace
  powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0

Pull smb client fix from Steve French:
 "Fix for smb3 readahead performance regression"

* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix read-performance regression by dropping readahead expansion

Pull i2c fix from Wolfram Sang:
 "An i2c driver fix"

* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -Wno-error    cache_shape.c ...
  cache_shape.c:18:10: fatal error: utils.h: No such file or directory
     18 | #include "utils.h"
        |          ^~~~~~~~~
  compilation terminated.

This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.

Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.

Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.

With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
  -I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
  cache_shape.c ...

Fixes: 5553a793 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au

Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fix from Mimi Zohar:
 "A single bug fix to properly remove all of the securityfs IMA
  measurement lists"

* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: fix wrong zero-assignment during securityfs dentry remove

Pull pci update from Bjorn Helgaas:

 - Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
   Synopsys DesignWare eDMA driver and reflect that he is no longer at
   Synopsys and isn't in a position to maintain the DesignWare xData
   traffic generator (Bjorn Helgaas)

* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
  MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the CMODX example in the recently added icache flushing
   prctl()

 - A fix to the perf driver to avoid corrupting event data on counter
   overflows when external overflow handlers are in use

 - A fix to clear all hardware performance monitor events on boot, to
   avoid dangling events firmware or previously booted kernels from
   triggering spuriously

 - A fix to the perf event probing logic to avoid erroneously reporting
   the presence of unimplemented counters. This also prevents some
   implemented counters from being reported

 - A build fix for the vector sigreturn selftest on clang

 - A fix to ftrace, which now requires the previously optional index
   argument to ftrace_graph_ret_addr()

 - A fix to avoid deadlocking if kexec crash handling triggers in an
   interrupt context

* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Avoid deadlock in kexec crash path
  riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
  riscv: selftests: Fix vsetivli args for clang
  perf: RISC-V: Check standard event availability
  drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
  drivers/perf: riscv: Do not update the event data if uptodate
  documentation: Fix riscv cmodx example

Pull drm fixes from Daniel Vetter:
 "Just small fixes all over here, all quiet as it should.

  drivers:

   - amd: mostly amdgpu display fixes + radeon vm NULL deref fix

   - xe: migration error handling + typoed register name in gt setup

   - i915: usb-c fix to shut up warnings on MTL+

   - panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
     wrongly

   - panel quirks

   - nouveau: NULL deref in get_modes

  drm core:

   - fbdev big endian fix for the dma memory backed variant

  drivers/firmware:

   - fix sysfb refcounting"

* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe/mcr: Avoid clobbering DSS steering
  drm/xe: fix error handling in xe_migrate_update_pgtables
  drm/ttm: Always take the bo delayed cleanup path for imported bos
  drm/fbdev-generic: Fix framebuffer on big endian devices
  drm/panthor: Fix sync-only jobs
  drm/panthor: Don't check the array stride on empty uobj arrays
  drm/amdgpu/atomfirmware: silence UBSAN warning
  drm/radeon: check bo_va->bo is non-NULL before using it
  drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
  drm/amd/display: Update efficiency bandwidth for dcn351
  drm/amd/display: Fix refresh rate range for some panel
  drm/amd/display: Account for cursor prefetch BW in DML1 mode support
  drm/amd/display: Add refresh rate range check
  drm/amd/display: Reset freesync config before update new state
  drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
  drm: panel-orientation-quirks: Add quirk for Valve Galileo
  drm/i915/display: For MTL+ platforms skip mg dp programming
  drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
  firmware: sysfb: Fix reference count of sysfb parent device

Pull gpio fixes from Bartosz Golaszewski:
 "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
  driver:

   - add two OF lookup quirks for TSC2005 and MIPS Lantiq

   - don't try to figure out bgpio_bits from the 'ngpios' property in
     gpio-mmio"

* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: of: add polarity quirk for TSC2005
  gpio: mmio: do not calculate bgpio_bits via "ngpios"
  gpiolib: of: fix lookup quirk for MIPS Lantiq

Pull TPM fixes from Jarkko Sakkinen:
 "This contains the fixes for !chip->auth condition, preventing the
  breakage of:
   - tpm_ftpm_tee.c
   - tpm_i2c_nuvoton.c
   - tpm_ibmvtpm.c
   - tpm_tis_i2c_cr50.c
   - tpm_vtpm_proxy.c

  All drivers will continue to work as they did in 6.9, except a single
  warning (dev_warn() not WARN()) is printed to klog only to inform that
  authenticated sessions are not enabled"

* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
  tpm: Address !chip->auth in tpm_buf_append_name()
  tpm: Address !chip->auth in tpm2_*_auth_session()

Pull kvm fix from Paolo Bonzini:

 - s390: fix support for z16 systems

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix LPSWEY handling

Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.

Merge tag 'amd-drm-fixes-6.10-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-07-03:

amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning

radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com

DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low".  In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493.

Fixes: d0d89493 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>