- 22 Jul, 2010 16 commits
-
-
Rene Sapiens authored
This patch renames the variables in the parameter lists and in the function definitions to make them match. Signed-off-by:
Rene Sapiens <rene.sapiens@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== validBit to valid_bit victimEntryNum to victim_entry_num virtualAddr to virtual_addr xType to xtype actualValue to actual_value EASIL1_MMUMMU_IRQSTATUSReadRegister32 to easil1_mmummu_irqstatus_read_register32 EASIL1_MMUMMU_LOCKBaseValueWrite32 to easil1_mmummu_lock_base_value_write32 easiNum to easi_num expectedValue to expected_value invalidValue to invalid_value L1_base to l1_base L2_base to l2_base lower16Bits to lower16_bits lower8Bits to lower8_bits lowerMiddle8Bits to lower_middle8_bits lowerUpper8Bits to lower_upper8_bits maxValidValue to max_valid_value minValidValue to min_valid_value newValue to new_value returnCodeIfMismatch to return_code_if_mismatch spyCodeIfMisMatch to spy_code_if_mis_match upper16Bits to upper16_bits upper8Bits to upper8_bits ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== ulBrdState to brd_state ulChnl to chnl ulDspAddr to dsp_add ulDspDestAddr to dsp_dest_addr ulDspLoadAddr to dsp_load_addr ulDspRunAddr to dsp_run_addr ulDspSrcAddr to dsp_src_addr ulMapAttrs to map_attr ulMemType to mem_type ulRMSFxn to rms_fxn ulStatus to ret ulVirtAddr to virt_addr uNumDesc to num_desc uNumToDSP to num_to_dsp uPaSize to pa_size uPhase to phase uSegId to segm_id uStream1 to stream1 uStream2 to stream2 uZId to zid ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== segmentId to segmnt_id SetPageDirty to set_page_dirty sizeInBytes to size_in_bytes sleepCode to sleep_code Status to status symName to sym_name szVar to sz_var Trapped_Args to trapped_args TTBPhysAddr to ttb_phys_addr uChirps to chirps uChnlId to ch_id uChnlID to ch_id uContentSize to cont_size uDDMAChnlId to ddma_chnl_id uEvents to events ulAlign to align_mask ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== puLen to len pulEntry to entry_pt pulFxnAddr to fxn_addr pulId to chan_id pulSegId to sgmt_id pVaBuf to va_buf pVirtualAddress to virtual_address pwMbVal to mbx_val pWord to word pXlatorAttrs to xlator_attrs registerFxn to register_fxn rootPersistent to root_prstnt sectionData to section_data sectionInfo to section_info sectionName to section_name sectName to sec_name ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== pstrFxn to str_fxn pstrLibName to str_lib_name pstrSect to str_sect pstrSym to str_sym pstrZLFileName to str_zl_file_name pstrZLFile to str_zl_file pszCoffPath to sz_coff_path pszMode to sz_mode pszName to sz_name pszSectName to sz_sect_name pszUuid to sz_uuid pszZlDllName to sz_zl_dll_name puAddr to addr pulAddr to addr pulBufSize to buff_size pulBytes to nbytes ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== pPhysAddr to phys_addr pPhysicalAddress to physical_address ppIntfFxns to if_fxns pProcLoadStat to proc_load_stat pProcStat to proc_lstat ppSym to sym_val pRefData to ref_data pRef to ref preservedBit to preserved_bit pResult to result procID to proc_id pSectInfo to sect_inf pSrc to src pstrContent to str_content pstrDummyFile to str_dummy_file pstrExecFile to str_exec_file ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== pMemStatBuf to mem_stat_buf pMgrAttrs to mgr_attrts pMgrInfo to mgr_info pNodeEnv to node_env pNodeId to node_uuid pNodeInfo to node_info pNumLibs to num_libs pNumPersLibs to num_pers_libs pObjDef to obj_def pObjUuid to obj_uuid poolPhysBase to pool_phys_base poolSize to pool_size pPctxt to pctxt ppDevContext to dev_cntxt ppDrvInterface to drv_intf pPersistentDepLibs to prstnt_dep_libs pPhyAddr to phy_addr ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== phNldrObj to nldr_ovlyobj phNldr to nldr phNodeMgr to node_man pHostBuf to host_buf pHostConfig to host_config phRmmMgr to rmm_mgr phStrmMgr to strm_man phStrm to strm_objct phXlator to xlator physicalAddr to physical_addr pInfo to channel_info pIOC to chan_ioc pLib to lib_obj pList to lst pMemBuf to mem_buf ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== phDevContext to device_ctx phDevNode to dev_nde phDevObject to device_obj phDispObject to dispatch_obj phDmmMgr to dmm_manager phDrvObject to drv_obj phDRVObject to drv_obj phIOMgr to io_man phLoader to loader phManager to manager phMgrObject to mgr_obj phMgr to mgr phMsgMgr to msg_man phMsgQueue to msgq phNldrNode to nldr_nodeobj ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== pdwSize to buff_size pdwState to board_state pdwValue to value pdwVersion to version pElemExisting to elem_existing pEntry to entry pExists to exists pfEnablePerf to enable_perf pGenObj to gen_obj phChnlMgr to channel_mgr phChnl to chnl phCodMgr to cod_mgr phDCDHandle to dcd_handle phDcdMgr to dcd_mgr phDehMgr to deh_manager ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== pArb to arb pbAlreadyAttached to already_attached pBaseAddr to base_addr pbHostBuf to host_buff pBufVa to buf_va pChnlInfo to channel_info pConfig to config_param pContent to content pContext to context pdcdProps to dcd_prop pDepLibUuids to dep_lib_uuids pDevNodeString to dev_node_strg pDispAttrs to disp_attrs pDsp to dsp pdwAutoStart to auto_start pdwChnl to chnl ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== hStrm to stream_obj iMode to io_mode irqMask to irq_mask lOffset to offset memPtr to mem_ptr moduleId to module_id msgCallback to msg_callback msgList to msg_list nArgc to num_argc nEntryStart to entry_start nMemSpace to mem_space nStatus to node_status nStrms to strms numLibs to num_libs numLockedEntries to num_locked_entries pageSize to page_sz ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== hDevContext to dev_ctxt hDevExtension to dev_extension hdevObject to device_obj hDispObject to disp_obj hDrVObject to driver_obj hDRVObject to driver_obj hMGRHandle to mgr_handle hNldrObject to nldr hNode1 to node1 hNode2 to node2 hNodeRes to node_resource hPCtxt to process_ctxt hProc to proc hStreamHandle to stream_handle ======================================== Signed-off-by:
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== dspAddr to dsp_address dspAdr to dsp_adr dspBaseVirt to dsp_base_virt dwDeviceContext to device_context dwDSPAddrOffset to dsp_addr_offset dwDSPAddr to dsp_addr dwErrInfo to error_info dwGPPBaseBA to gpp_base_ba dwMask to mask dwTimeout to timeout dwTimeOut to timeout dwValue to value entryNum to entry_num execFile to exec_file fFlush to flush_data FlushMemType to flush_mem_type ======================================== Signed-off-by:
-
Rene Sapiens authored
This patch fix a compilation error in uuid_hex_to_bin due to the patch "simplify and clean up" Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
- 08 Jul, 2010 24 commits
-
-
Rene Sapiens authored
The intention of this patch is to rename the remaining variables with camel case. Variables will be renamed avoiding camel case and Hungarian notation. The words to be renamed in this patch are: ======================================== aAddr to addrs aArgs to args aSize to len baseAddress to base_address bDynamicLoad to dynamic_load bForce to force cCharSize to char_size cContentSize to content_size cCount to count cDspCharSize to dsp_char_size cIndex to index ClkId to clock_id cOrigin to origin dataBasePhys to data_base_phys dcdObjUnion to dcd_obj deviceContext to device_ctxt ======================================== Signed-off-by:
-
Greg Kroah-Hartman authored
This adds the needed Kconfig and Makefile changes to add the quickstart driver to the build. Cc: Angelo Arrifano <miknix@gentoo.org> Signed-off-by: -
Angelo Arrifano authored
This adds the quickstart acpi key driver to the staging tree Signed-off-by: -
Ky Srinivasan authored
This patch is a clocksource implementation suitable for guests hosted on HyperV. Time keeping in Linux guests hosted on HyperV is unstable. This clocksource driver fixes the problem. This driver uses the hyperv detection code integrated into the kernel. Signed-off-by:
K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Ky Srinivasan authored
This is needed so that the staging hyperv can properly access this symbol. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Arnd Bergmann authored
These could not be detected by the semantic patch. Signed-off-by:Arnd Bergmann <arnd@arndb.de>
-
Randy Dunlap authored
Several solo drivers need <linux/delay.h>, so add it to the private solo6010.h header file. drivers/staging/solo6x10/solo6010-core.c:191: error: implicit declaration of function 'mdelay' drivers/staging/solo6x10/solo6010-tw28.c:181: error: implicit declaration of function 'msleep_interruptible' drivers/staging/solo6x10/solo6010-gpio.c:78: error: implicit declaration of function 'udelay' drivers/staging/solo6x10/solo6010-v4l2-enc.c:254: error: implicit declaration of function 'mdelay' Signed-off-by:Randy Dunlap <randy.dunlap@oracle.com>
-
Uwe Kleine-König authored
Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
Peter Huewe authored
This patch prevents the code from calling parport_release and parport_unregister_device twice with the same arguments - and thus fixes an oops. Rationale: After the first call the parport is already released and the handle isn't valid anymore and calling parport_release and parport_unregister_device twice isn't a good idea. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Cc: stable <stable@kernel.org> Acked-by:
Willy Tarreau <w@1wt.eu>
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
-
Andy Shevchenko authored
There is recently added hex_to_bin() kernel's method which we could use instead of custom long function. Signed-off-by:
-
Felipe Contreras authored
We only want this code when testing. Signed-off-by:
Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by:
-
Felipe Contreras authored
Obviously nobody was using DSP_TRACEBUF_DISABLED, since it wasn't even standarized between TRACEBUF and TRACE_BUF. Signed-off-by:
-
