- 25 Aug, 2017 20 commits
-
-
Hannes Reinecke authored
As the cciss driver has been removed there are no overlapping PCI IDs anymore, and the 'hpsa_allow_any' flag can be removed. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The hpsa driver now has support for all boards the cciss driver used to support, so this patch removes the cciss driver and make hpsa an alias to cciss. Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Hannes Reinecke authored
Legacy boards might not support the 'extended' report luns format, but as this is to be expected we don't need to print out an error here. Signed-off-by:
-
Hannes Reinecke authored
Legacy boards might not support the LV_DEVICE_ID VPD page, so we shouldn't print out an error message here. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
Hannes Reinecke authored
Legacy boards might not support volume status, so assume the volume is online here. Signed-off-by:
-
Hannes Reinecke authored
Add support for legacy boards, ensuring to enable the driver for those boards only when 'hpsa_allow_any' is set. The attribute 'legacy_board' is set to '1' if the device is a legacy board, and '0' otherwise. Signed-off-by:
-
Christophe JAILLET authored
'rc' is known to be 0 at this point. If 'create_context()' fails, returns -ENOMEM instead of 0 which means success. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Helge Deller authored
On parisc I see this UBSAN warning with a sym53c896: UBSAN: Undefined behaviour in ./drivers/scsi/sym53c8xx_2/sym_hipd.c:762:24 index -1903078336 is out of range for type 'u32 [7]' Avoid this warning by switching to div64_ul(). [mkp: fix typo] Signed-off-by:
Helge Deller <deller@gmx.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Hannes Reinecke authored
While the 'state' attribute can (and will) change occasionally, calling 'poll()' or 'select()' on it fails as sysfs is never notified that the state has changed. With this patch calling 'poll()' or 'select()' will work properly. Signed-off-by:
-
Hannes Reinecke authored
Rework scsi_internal_device_unblock_nowait() into using a switch statement. No functional changes. Signed-off-by:
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by:
Bradley Grove <bgrove@attotech.com> Signed-off-by:
-
Richard W.M. Jones authored
Since switching to blk-mq as the default in commit 5c279bd9 ("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as much kernel memory. qemu currently allocates a fixed 128 entry virtqueue. can_queue currently is set to 1024. But with indirect descriptors, each command in the queue takes 1 virtqueue entry, so the number of commands which can be queued is equal to the length of the virtqueue. Note I intend to send a patch to qemu to allow the virtqueue size to be configured from the qemu command line. Signed-off-by:
Richard W.M. Jones <rjones@redhat.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Richard W.M. Jones authored
If using indirect descriptors, you can make the total_sg as large as you want. If not, BUG is too serious because the function later returns -ENOSPC. Signed-off-by:
-
Manish Rangankar authored
[qed_sp_iscsi_func_start:189(host_7-0)]Cannot satisfy CQ amount. Queues requested 8, CQs available 4. Aborting function start Above condition will resolve as management firmware is capable of telling us the number of CQs available for a given PF, qed will communicate the same number to qedi, So that qedi will know how much CQs are allowed. Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by:
-
John Garry authored
The driver version is not updated with changes to the driver, so it has no value, so just get rid of it. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
Instances of kfree(shost) should be replaced with scsi_host_put(). In addition, a missing scsi_host_put() is added for error path in hisi_sas_shost_alloc_pci() and v3 driver removal. Signed-off-by: Pan Bian <bianpan2016@163.com> # For main.c changes Signed-off-by:
-
John Garry authored
Variable res only holds value 0, so remove it. This cleans up a coccicheck warning. Signed-off-by:
-
Xiang Chen authored
Add function to set linkrate for v3 hw. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
This patch updates some register setting according to recommendation from HW designer and experiment. Signed-off-by:
-
Xiang Chen authored
Use ACPI "_RST" method to reset the controller, since FLR is not supported. Function hisi_sas_stop_phys() is introduced to remove some code duplication. Signed-off-by:
-
- 11 Aug, 2017 13 commits
-
-
Xiang Chen authored
This patch adds calls to kill CQ takslets v3 hw during probe failure. Signed-off-by:
-
Xiang Chen authored
The channel interrupt is to process all the interrupts except PHY UP/DOWN and broadcast interrupt. So we need to clear all the interrupts except those 3 interrupts after processing channel interrupts. Signed-off-by:
-
Xiang Chen authored
Modify STP link timer from 10ms to 500ms. Also add the register address. Signed-off-by:
-
Xiang Chen authored
For v3 hw, internal abort function required status and command buffer to be set, so add necessary code for this. Signed-off-by:
-
Xiaofei Tan authored
Add two ATA commands, ATA_CMD_ZAC_MGMT_IN and ATA_CMD_ZAC_MGMT_OUT in hisi_sas_get_ata_protocol(), to support SATA SMR disk. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiang Chen authored
This patch is a fix related to freeing a device in v2 hw driver. Before, we polled to ITCT CLR interrupt to check if a device is free. This was error prone, as if the interrupt doesn't occur in 10us, we miss processing it. To avoid this situation, service this interrupt and sync the event with a completion. Signed-off-by:
-
Xiang Chen authored
This patch adds support to clean-up allocated IRQs and kill tasklets when probe fails and for driver removal. Signed-off-by:
-
Xiang Chen authored
This patch removes some repeated configurations: (1) The device id of the device is already set in the alloc function, so we don't need to modify in free device function. (2) Field dev_type and dev_status are configured in hisi_sas_dev_gone(), so there is no need for repeated config in free_device_v3_hw. Signed-off-by: -
John Garry authored
The code to print ECC errors in v2 hw driver is very repetitive. This patch condensed the code by looping an array of errors. Signed-off-by:
Shiju Jose <shiju.jose@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
Add DFX feature for v2 hw. We are adding support for the following errors: - loss_of_dword_sync_count - invalid_dword_count - phy_reset_problem_count - running_disparity_error_count Signed-off-by:
-
Xiang Chen authored
The value dw0 is the residual bytes when UNDERFLOW error happens, but we filled the residual with the value of dw3 before. So change the residual from dw3 to dw0. Signed-off-by:
-
Xiang Chen authored
When some interrupts happen together, we need to process every interrupt one-by-one, and should not return immediately when one interrupt process is finished being processed. Signed-off-by:
-
Xiaofei Tan authored
This patch provides fixes for the following issues: 1. Fix issue of controller reset required to send commands. For reset process, it may be required to send commands to the controller, but not during soft reset. So add HISI_SAS_NOT_ACCEPT_CMD_BIT to prevent executing a task during this period. 2. Send a broadcast event in rescan topology to detect any topology changes during reset. 3. Previously it was not ensured that libsas has processed the PHY up and down events after reset. Potentially this could cause an issue that we still process the PHY event after reset. So resolve this by flushing shot workqueue in LLDD reset. 4. Port ID requires refresh after reset. The port ID generated after reset is not guaranteed to be the same as before reset, so it needs to be refreshed for each device's ITCT. Signed-off-by:
-
- 10 Aug, 2017 7 commits
-
-
Kevin Barnett authored
Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
-
Kevin Barnett authored
Update the driver’s PCI IDs to match the latest Microsemi controllers Reviewed-by:
-
Kevin Barnett authored
Add PQI reset to driver shutdown callback to work around controller bug. During an 1.) OS shutdown or 2.) kexec outside of a kdump, the Linux kernel will clear BME on our controller. If BME is cleared during a controller/host PCIe transfer, the controller will lock up. So we perform a PQI reset in the driver's shutdown callback function to eliminate the possibility of a controller/host PCIe transfer being active when the kernel clears BME immediately after calling the driver's shutdown callback. Reviewed-by:
-
Kevin Barnett authored
Reviewed-by:
-
Kevin Barnett authored
- make pass-thru requests bi-directional Reviewed-by:
-
Kevin Barnett authored
- distinguish between shutdown and non-shutdown. Reviewed-by:
-
Kevin Barnett authored
Reviewed-by:
-
