If the device has a sfp bus attached, call its
sfp_get_module_eeprom_by_page() function, otherwise use the ethtool op
for the device. This follows how the IOCTL works.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new netlink API for reading SFP data requires a new op to be
implemented. The idea of the new netlink SFP code is that userspace is
responsible to parsing the EEPROM data and requesting pages, rather
than have the kernel decide what pages are interesting and returning
them. This allows greater flexibility for newer formats.

Currently the generic SFP code only supports simple SFPs. Allow i2c
address 0x50 and 0x51 to be accessed with page and bank must always be
0. This interface will later be extended when for example QSFP support
is added.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case netlink get_module_eeprom_by_page() callback is not implemented
by the driver, try to call old get_module_info() and get_module_eeprom()
pair. Recalculate parameters to get_module_eeprom() offset and len using
page number and their sizes. Return error if this can't be done.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two ways to retrieve information from SFP EEPROMs.  Many
devices make use of the common code, and assign the sfp_bus pointer in
the netdev to point to the bus holding the SFP device. Some MAC
drivers directly implement ops in there ethool structure.

Export within net/ethtool the two helpers used to call these methods,
so that they can also be used in the new netlink code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow the driver to recognise DSFP transceiver module ID and therefore
allow its EEPROM dumps using ethtool.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement ethtool_ops::get_module_eeprom_by_page() to enable
support of new SFP standards.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for ethtool_ops::get_module_eeprom_data() implementation by
extracting common part of mlx5_query_module_eeprom() into a separate
function.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define get_module_eeprom_by_page() ethtool callback and implement
netlink infrastructure.

get_module_eeprom_by_page() allows network drivers to dump a part of
module's EEPROM specified by page and bank numbers along with offset and
length. It is effectively a netlink replacement for get_module_info()
and get_module_eeprom() pair, which is needed due to emergence of
complex non-linear EEPROM layouts.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: a few small fixes

This series implements some minor bug fixes or improvements.

The first patch removes an apparently unnecessary restriction, which
results in an error on a 32-bit ARM build.

The second makes a definition used for SDM845 match what is used in
the downstream code.

The third just ensures two netdev pointers are only non-null when
valid.

The fourth simplifies a little code, knowing that a called function
never returns an error.

The fifth and sixth just remove some empty/place holder functions.

And the last patch fixes a comment, makes a function private, and
removes an unnecessary double-negation of a Boolean variable.  This
patch produces a warning from checkpatch, indicating that a pair of
parentheses is unnecessary.  I agree with that advice, but it
conflicts with a suggestion from the compiler.  I left the "problem"
in place to avoid the compiler warning.
====================

Link: https://lore.kernel.org/r/20210409180722.1176868-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some time ago changes were made to stop referring to clearing the
hardware pipeline as a "tag process."  Fix a comment to use the
newer terminology.

Get rid of a pointless double-negation of the Boolean toward_ipa
flag in ipa_endpoint_config().

make ipa_endpoint_exit_one() private; it's only referenced inside
"ipa_endpoint.c".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are place holder functions in the GSI code that do nothing.
Remove these, knowing we can add something back in their place if
they're really needed someday.

Some of these are inverse functions (such as teardown to match setup).
Explicitly comment that there is no inverse in these cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are place holder functions in the IPA code that do nothing.
For the most part these are inverse functions, for example, once the
routing or filter tables are set up there is no need to perform any
matching teardown activity at shutdown, or in the case of an error.

These can be safely removed, resulting in some code simplification.
Add comments in these spots making it explicit that there is no
inverse.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In ipa_modem_stop(), if the modem netdev pointer is non-null we call
ipa_stop().  We check for an error and if one is returned we handle
it.  But ipa_stop() never returns an error, so this extra handling
is unnecessary.  Simplify the code in ipa_modem_stop() based on the
knowledge no error handling is needed at this spot.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In ipa_modem_start(), we set endpoint netdev pointers before the
network device is registered.  If registration fails, we don't undo
those assignments.  Instead, wait to assign the netdev pointer until
after registration succeeds.

Set these endpoint netdev pointers to NULL in ipa_modem_stop()
before unregistering the network device.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On IPA v3.5.1, the sequencer type for the modem TX endpoint does not
define the replication portion in the same way the downstream code
does.  This difference doesn't affect the behavior of the upstream
code, but I'd prefer the two code bases use the same configuration
value here.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I no longer know why a validation check ensured the size of an entry
passed to gsi_trans_pool_init() was restricted to be a multiple of 8.
For 32-bit builds, this condition doesn't always hold, and for DMA
pools, the size is rounded up to a power of 2 anyway.

Remove this restriction.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

MAINTAINERS
 - keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
 - simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
 - trivial
include/linux/ethtool.h
 - trivial, fix kdoc while at it
include/linux/skmsg.h
 - move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
 - add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
 - trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Even if the current mapping is correct for the 1 CPU and 2 CPU cases
(currently enetc is included in SoCs with up to 2 CPUs only), better
use a generic rule for the mapping to cover all possible cases.
The number of CPUs is the same as the number of interrupt vectors:

Per device Tx rings -
device_tx_ring[idx], where idx = 0..n_rings_total-1

Per interrupt vector Tx rings -
int_vector[i].ring[j], where i = 0..n_int_vects-1
			     j = 0..n_rings_per_v-1

Mapping rule -
n_rings_per_v = n_rings_total / n_int_vects
for i = 0..n_int_vects - 1:
	for j = 0..n_rings_per_v - 1:
		idx = n_int_vects * j + i
		int_vector[i].ring[j] <- device_tx_ring[idx]
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210409071613.28912-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The blamed commit introduced a bit in the TX software buffer descriptor
structure for determining whether a BD is final or not; we rearm the TX
interrupt vector for every frame (hence final BD) transmitted.

But there is a problem with the patch: it replaced a condition whose
expression is a bool which was evaluated at the beginning of the "while"
loop with a bool expression that is evaluated on the spot: tx_swbd->is_eof.

The problem with the latter expression is that the tx_swbd has already
been incremented at that stage, so the tx_swbd->is_eof check is in fact
with the _next_ software BD. Which is _not_ final.

The effect is that the CPU is in 100% load with ksoftirqd because it
does not acknowledge the TX interrupt, so the handler keeps getting
called again and again.

The fix is to restore the code structure, and keep the local bool is_eof
variable, just to assign it the tx_swbd->is_eof value instead of
!!tx_swbd->skb.

Fixes: d504498d ("net: enetc: add a dedicated is_eof bit in the TX software BD")
Reported-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20210409192759.3895104-1-olteanv@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-next 2021-04-09

This pr contains changes from  mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.

1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/

2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/

From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.

From Mikhael, Remove unused struct field

From Saeed, Cleanup W=1 prototype warning

From Zheng, Esw related cleanup

From Tariq, User order-0 page allocation for EQs

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
  net/mlx5: Dynamically assign MSI-X vectors count
  net/mlx5: Add dynamic MSI-X capabilities bits
  PCI/IOV: Add sysfs MSI-X vector assignment interface
  net/mlx5: Use order-0 allocations for EQs
  net/mlx5: Add IFC bits needed for single FDB mode
  net/mlx5: E-Switch, Refactor send to vport to be more generic
  RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
  net/mlx5: E-Switch, Add eswitch pointer to each representor
  net/mlx5: E-Switch, Add match on vhca id to default send rules
  net/mlx5: Remove unused mlx5_core_health member recover_work
  net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
  net/mlx5: Cleanup prototype warning
====================

Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This loop will try to unmap enetc_unmap_tx_buff[-1] and crash.

Fixes: 9d2b68cc ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/YHBHfCY/yv3EnM9z@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eliminate the following coccicheck warning:

drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c:529:3-9: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c:533:2-8: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:161:2-7: WARNING:
 NULL check before some freeing functions is not needed.
drivers/net/ethernet/chelsio/cxgb4/clip_tbl.c:327:3-9: WARNING:
 NULL check before some freeing functions is not needed.
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20210409115339.4598-1-linqiheng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heiner Kallweit says:

====================
net: make PHY PM ops a no-op if MAC driver manages PHY PM

Resume callback of the PHY driver is called after the one for the MAC
driver. The PHY driver resume callback calls phy_init_hw(), and this is
potentially problematic if the MAC driver calls phy_start() in its resume
callback. One issue was reported with the fec driver and a KSZ8081 PHY
which seems to become unstable if a soft reset is triggered during aneg.

The new flag allows MAC drivers to indicate that they take care of
suspending/resuming the PHY. Then the MAC PM callbacks can handle
any dependency between MAC and PHY PM.
====================

Link: https://lore.kernel.org/r/9e695411-ab1d-34fe-8b90-3e8192ab84f6@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new mac_managed_pm flag to indicate that the driver takes care
of PHY power management.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new mac_managed_pm flag to work around an issue with KSZ8081 PHY
that becomes unstable when a soft reset is triggered during aneg.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Resume callback of the PHY driver is called after the one for the MAC
driver. The PHY driver resume callback calls phy_init_hw(), and this is
potentially problematic if the MAC driver calls phy_start() in its resume
callback. One issue was reported with the fec driver and a KSZ8081 PHY
which seems to become unstable if a soft reset is triggered during aneg.

The new flag allows MAC drivers to indicate that they take care of
suspending/resuming the PHY. Then the MAC PM callbacks can handle
any dependency between MAC and PHY PM.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit e880f8b3.

1) Patch has not been properly tested, and is wrong [1]
2) Patch submission did not include TCP maintainer (this is me)

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8426 Comm: syz-executor478 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_select_window+0x56d/0xad0 net/ipv4/tcp_output.c:3015
Code: 44 89 ff e8 d5 cd f0 f9 45 39 e7 0f 8d 20 ff ff ff e8 f7 c7 f0 f9 44 89 e3 e9 13 ff ff ff e8 ea c7 f0 f9 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 d3 c7 f0 f9 41 f7 dc bf 1f 00
RSP: 0018:ffffc9000184fac0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff87832e76 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87832e14 R11: 0000000000000000 R12: 0000000000000000
R13: 1ffff92000309f5c R14: 0000000000000000 R15: 0000000000000000
FS:  00000000023eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc2b5f426c0 CR3: 000000001c5cf000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tcp_select_window net/ipv4/tcp_output.c:264 [inline]
 __tcp_transmit_skb+0xa82/0x38f0 net/ipv4/tcp_output.c:1351
 tcp_transmit_skb net/ipv4/tcp_output.c:1423 [inline]
 tcp_send_active_reset+0x475/0x8e0 net/ipv4/tcp_output.c:3449
 tcp_disconnect+0x15a9/0x1e60 net/ipv4/tcp.c:2955
 inet_shutdown+0x260/0x430 net/ipv4/af_inet.c:905
 __sys_shutdown_sock net/socket.c:2189 [inline]
 __sys_shutdown_sock net/socket.c:2183 [inline]
 __sys_shutdown+0xf1/0x1b0 net/socket.c:2201
 __do_sys_shutdown net/socket.c:2209 [inline]
 __se_sys_shutdown net/socket.c:2207 [inline]
 __x64_sys_shutdown+0x50/0x70 net/socket.c:2207
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: e880f8b3 ("tcp: Reset tcp connections in SYN-SENT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Sauvik Saha <ssaha@codeaurora.org>
Link: https://lore.kernel.org/r/20210409170237.274904-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

DCCP is virtually never used, so no need to use space in struct net for it.

Put the pernet ipv4/v6 socket in the dccp ipv4/ipv6 modules instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20210408174502.1625-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...

Pull io_uring fixes from Jens Axboe:
 "Two minor fixups for the reissue logic, and one for making sure that
  unbounded work is canceled on io-wq exit"

* tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block:
  io-wq: cancel unbounded works on io-wq destroy
  io_uring: fix rw req completion
  io_uring: clear F_REISSUE right after getting it

Pull devicetree fixes from Rob Herring:

 - Fix fw_devlink failure with ".*,nr-gpios" properties

 - Doc link reference fixes from Mauro

 - Fixes for unaligned FDT handling found on OpenRisc. First, avoid
   crash with better error handling when unflattening an unaligned FDT.
   Second, fix memory allocations for FDTs to ensure alignment.

* tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: property: fw_devlink: do not link ".*,nr-gpios"
  dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference
  dt-bindings: fix references for iio-bindings.txt
  dt-bindings: don't use ../dir for doc references
  of: unittest: overlay: ensure proper alignment of copied FDT
  of: properly check for error returned by fdt_get_name()

Pull drm fixes from Dave Airlie:
 "Was relatively quiet this week, but still a few pulls came in, pretty
  much small fixes across the board, a couple of regression fixes in the
  amdgpu/radeon code, msm has a few minor fixes across the board, a
  panel regression fix also.

  amdgpu:
   - DCN3 fix
   - Fix CAC setting regression for TOPAZ
   - Fix ttm regression

  radeon:
   - Fix ttm regression

  msm:
   - a5xx/a6xx timestamp fix
   - microcode version check
   - fail path fix
   - block programming fix
   - error removal fix

  i915:
   - Fix invalid access to ACPI _DSM objects

  xen:
   - Fix use-after-free in xen
   - minor duplicate defintion cleanup

  vc4:
   - Reduce fifo threshold on hvs4 to fix a fifo full error
   - minor redunantant assignment cleanup

  panel:
   - Disable TE support for Droid4 and N950"

* tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm:
  drm/vc4: crtc: Reduce PV fifo threshold on hvs4
  drm/vc4: plane: Remove redundant assignment
  drm/amdgpu/smu7: fix CAC setting on TOPAZ
  drm/radeon: Fix size overflow
  drm/amdgpu: Fix size overflow
  drm/i915: Fix invalid access to ACPI _DSM objects
  drm/amd/display: Add missing mask for DCN3
  drm/panel: panel-dsi-cm: disable TE for now
  drm/msm/disp/dpu1: program 3d_merge only if block is attached
  drm/msm: a6xx: fix version check for the A650 SQE microcode
  drm/msm: Fix a5xx/a6xx timestamps
  drm/msm: Fix removal of valid error case when checking speed_bin
  drm/msm: Set drvdata to NULL when msm_drm_init() fails
  drivers: gpu: drm: xen_drm_front_drm_info is declared twice
  gpu/xen: Fix a use after free in xen_drm_drv_init

napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.

If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.

This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.

This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.

v1 -> v2:
  - let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41 ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).

Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.

Many thanks to Heiner Kallweit for suggesting this solution.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 3e21a10f ("lan743x: trim all 4 bytes of the FCS; not just 2")
Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.

nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.

[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
 - gpio-adnp.txt
 - gpio-xgene-sb.txt
 - gpio-xlp.txt
 - snps,dw-apb-gpio.yaml

[1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20

Fixes errors such as:
  OF: /palmbus@300000/gpio@600: could not find phandle

Fixes: 7f00be96 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Changeset 1ca9d1b1 ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
renamed: Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
to: Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml.

Update its cross-reference accordingly.

Fixes: 1ca9d1b1 ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3e205e5fa701e4bc15d39d6ac1f57717df2bb4c6.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

The iio-bindings.txt was converted into two files and merged
at the dt-schema git tree at:

	https://github.com/devicetree-org/dt-schema

Yet, some documents still refer to the old file. Fix their
references, in order to point to the right URL.

Fixes: dba91f82 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.

So, replace them by the full patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/68d3a1244119d1f2829c375b0ef554cf348bc89f.1617972339.git.mchehab+huawei@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Merge tag 'drm-intel-fixes-2021-04-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix invalid access to ACPI _DSM objects (Takashi)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YHAW6NInrybUoat6@intel.com