- 21 Sep, 2018 4 commits
-
-
Jason Gunthorpe authored
This is the first step to make ODP use the owning_mm that is now part of struct ib_umem. Each ODP umem is linked to a single per_mm structure, which in turn, is linked to a single mm, via the embedded mmu_notifier. This first patch introduces the structure and reworks eveything to use it. This also needs to introduce tgid into the ib_ucontext_per_mm, as get_user_pages_remote() requires the originating task for statistics tracking. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Jason Gunthorpe authored
This no longer has any use, we can use container_of to get to the umem_odp, and a simple flag to indicate if this is an odp MR. Remove the few remaining references to it. Signed-off-by:
-
Jason Gunthorpe authored
These two structures are linked together, use the container_of pattern instead of a double allocation to make the code simpler and easier to follow. Signed-off-by:
-
Jason Gunthorpe authored
All of these functions already require the ODP version of the umem struct, make this very clear by having the signature require it. This paves the way to using the container_of() pattern to link umem_odp and umem together. Signed-off-by:
-
- 20 Sep, 2018 7 commits
-
-
Jason Gunthorpe authored
Update this driver to match the code it copies from umem.c which no longer uses tgid. Signed-off-by:
-
Jason Gunthorpe authored
This is just wrong, the process that calls into the reg_mr is the process associated with the umem, and that does not have to be the same process that created the context. When this code was first written mmgrab() didn't exist, however these days we can just directly hold the mm_struct pointer in the umem and have no ambiguity when it comes to releasing the umem as to which mm it was associated with. Signed-off-by:
-
Jason Gunthorpe authored
The disassociate_ucontext function in every driver is now empty, so we don't need this ugly and wrong code that was messing with tgids. rdma_user_mmap_io does this same work in a better way. Signed-off-by:
-
Jason Gunthorpe authored
Rely on the new core code helper to map BAR memory from the driver. Signed-off-by:
-
Jason Gunthorpe authored
Rely on the new core code helper to map BAR memory from the driver. Signed-off-by:
-
Jason Gunthorpe authored
Rely on the new core code helper to map BAR memory from the driver. Signed-off-by:
-
Jason Gunthorpe authored
To support disassociation and PCI hot unplug, we have to track all the VMAs that refer to the device IO memory. When disassociation occurs the VMAs have to be revised to point to the zero page, not the IO memory, to allow the physical HW to be unplugged. The three drivers supporting this implemented three different versions of this algorithm, all leaving something to be desired. This new common implementation has a few differences from the driver versions: - Track all VMAs, including splitting/truncating/etc. Tie the lifetime of the private data allocation to the lifetime of the vma. This avoids any tricks with setting vm_ops which Linus didn't like. (see link) - Support multiple mms, and support properly tracking mmaps triggered by processes other than the one first opening the uverbs fd. This makes fork behavior of disassociation enabled drivers the same as fork support in normal drivers. - Don't use crazy get_task stuff. - Simplify the approach for to racing between vm_ops close and disassociation, fixing the related bugs most of the driver implementations had. Since we are in core code the tracking list can be placed in struct ib_uverbs_ufile, which has a lifetime strictly longer than any VMAs created by mmap on the uverbs FD. Link: https://www.spinics.net/lists/stable/msg248747.html Link: https://lkml.kernel.org/r/CA+55aFxJTV_g46AQPoPXen-UPiqR1HGMZictt7VpC-SMFbm3Cw@mail.gmail.comSigned-off-by:
-
- 19 Sep, 2018 5 commits
-
-
liuyixian authored
It will trigger unnecessary interrupts caused by time out if prints inside aeq handle under some configurations. Thus, move all prints out of aeq handle to work queue. Signed-off-by:
liuyixian <liuyixian@huawei.com> Signed-off-by:
-
Jason Gunthorpe authored
The error path has several mistakes - cdev_del should not be called if cdev_device_add fails - We must call put_device on all the goto exit paths as that is what frees the uapi, SRCU and the struct itself. While we are here consolidate all the uvdev_dev init that cannot fail at the top. Fixes: c5c4d92e ("RDMA/uverbs: Use cdev_device_add() instead of cdev_add()") Signed-off-by:
Parav Pandit <parav@mellanox.com>
-
YueHaibing authored
rdma_set_src_addr_rcu should check copy_src_l2_addr fails, rather than always return 0. Also copy_src_l2_addr should return 'ret' as its return value when rdma_translate_ip fails. Fixes: c31d4b2d ("RDMA/core: Protect against changing dst->dev during destination resolve") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Håkon Bugge authored
Commit f27b4746 ("i40iw: add connection management code") uses an incorrect rcu iterator, whilst holding the rtnl_lock. Since the critical region invokes i40iw_manage_qhash(), which is a sleeping function, the rcu locking and traversal cannot be used. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
-
Jason Gunthorpe authored
This does nothing but indicate if the uverbs_file is in the device's list, use list_del_init instead. Signed-off-by:
-
- 17 Sep, 2018 1 commit
-
-
Jason Gunthorpe authored
This enum has become part of the uABI, as both RXE and the ib_uverbs_post_send() command expect userspace to supply values from this enum. So it should be properly placed in include/uapi/rdma. In userspace this enum is called 'enum ibv_wr_opcode' as part of libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV, IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it turns out) into libiberbs in 2015. The kernel has changed its mind on the numbering for several of the IB_WC values over the years, but has remained stable on IB_WR_LOCAL_INV and below. Based on this we can conclude that there is no real user space user of the values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via rdma-core. This is confirmed by inspection, only rxe uses the kernel enum and implements the latter operations. rxe has clearly never worked with these attributes from userspace. Other drivers that support these opcodes implement the functionality without calling out to the kernel. To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we choose to renumber the IB_WR enum in the kernel to match the uABI that userspace has bee using since before Soft RoCE was merged. This is an overall simpler configuration for the whole software stack, and obviously can't break anything existing. Reported-by:
Seth Howell <seth.howell@intel.com> Tested-by:
-
- 13 Sep, 2018 4 commits
-
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
-
Arseny Maslennikov authored
Some tools may currently be using only the deprecated attribute; let's print an elaborate and clear deprecation notice to kmsg. To do that, we have to replace the whole sysfs file, since we inherit the original one from netdev. Signed-off-by:
Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by:
-
Arseny Maslennikov authored
Some InfiniBand network devices have multiple ports on the same PCI function. This initializes the `dev_port' sysfs field of those network interfaces with their port number. Prior to this the kernel erroneously used the `dev_id' sysfs field of those network interfaces to convey the port number to userspace. The use of `dev_id' was considered correct until Linux 3.15, when another field, `dev_port', was defined for this particular purpose and `dev_id' was reserved for distinguishing stacked ifaces (e.g: VLANs) with the same hardware address as their parent device. Similar fixes to net/mlx4_en and many other drivers, which started exporting this information through `dev_id' before 3.15, were accepted into the kernel 4 years ago. See 76a066f2 (`net/mlx4_en: Expose port number through sysfs'). Signed-off-by:
-
Arseny Maslennikov authored
The sysfs field was introduced 4 years ago along with fixes to various drivers that erroneously used `dev_id' for that purpose, but it was not properly documented anywhere. See commit v3.14-rc3-739-g3f85944f. Signed-off-by:
-
- 12 Sep, 2018 12 commits
-
-
Parav Pandit authored
When resolving destination address or route, when net namespace is unavailable, refer to the net namespace of the netdevice of the SGID attribute. This is typically the case for requests arriving from the network for RoCE ports. Signed-off-by:
-
Parav Pandit authored
Introduce an API rdma_read_gid_attr_ndev_rcu() to return GID attribute netdevice which is in UP state for accessing netdevice's fields such as net namespace and ifindex. This is useful for users who intent to access netdevice fields under rcu lock. Signed-off-by:
-
Parav Pandit authored
Currently RoCE route resolve functionality is split between two functions. (a) roce_resolve_route_from_path() and its helper function rdma_resolve_ip_route(). Due to this multiple sockaddr src structures are created in both functions with rdma_dev_addr is an interface between the two for checks. Since there is only one user of rdma_resolve_ip_route() as RoCE, combine the functionality of both functions to roce_resolve_route_from_path() and further reduce the scope of rdma_dev_addr to core/addr.c This also allow to extend addr_resolve() in subsequent patch to consider netdev properties of GID in safer way under rcu lock. Additionally src and dst addresses were always provided, so skip the src addr NULL pointer check as they are present on the stack now. Signed-off-by:
-
Parav Pandit authored
During resolving address process, during route lookup and while performing src address translation in case of loopback mode, hold the rcu lock so that if netdevice is moving to different net namespace, or being unregistered, it can be synchronized with net/core/dev.c, ie change_net_namespace() ->dev_close_many() ->rt6_uncached_list_flush_dev() who would change dst->dev to loopback device of the given net namespace. Therefore, hold the rcu lock and sync with synchronize_net() of change_net_namespace() to ensure that netdevice cannot get freed while dst->dev is being used. Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Set and refer to rdma_dev_addr network type instead of dst->ndev to reduce dependency on accessing dst netdevice. Signed-off-by:
-
Parav Pandit authored
Use common code flow for resolving neighbour and for finding source addresses. Signed-off-by:
-
Parav Pandit authored
Now that rdma_copy_addr() only copies the source addresses and all callers are interested in copying only source addresses, simplify it to drop the destination address argument. Given that it only copies source layer2 addresses, rename it to rdma_copy_src_l2_addr for better code readability. Signed-off-by:
-
Parav Pandit authored
rdma_translate_ip() is done while resolving address for the loopback addresses. The current flow is convoluted with resolve neighbor being optional. This patch simplifies the code in following ways. (a) Use common code between IPv4 and IPv6 for address translation, loopback checks and acquiring netdevice. (b) During neigh resolve in addr_resolve_neigh(), only copy destination address. (c) Always resolve the source address before the destination address, because it doesn't depend on resolving neigh being requested or not. This helps to reduce 3 calls of rdma_copy_addr and rdma_translate_ip to one and makes it easier to follow the code flow. Now that ib_nl_fetch_ha() doesn't depend on dst, drop dst argument from ib_nl_fetch_ha(). Signed-off-by: -
Parav Pandit authored
Current code typecasts destination address using extra variable but uses source address as is. Even though the compiler optimizes such code well, just let each protocol specific function typecast for src and dest both and have symmetric code. Signed-off-by:
-
Parav Pandit authored
addr4_resolve() and addr6_resolve() are called by checking the value of sa_family. Both above functions overwrite the value after typecasting, this is not necessary. Signed-off-by:
-
Parav Pandit authored
This fixes two issues: 1. When address family is other than IPv4 or v6, rdma_translate_ip() returns success which is incorrect. 2. When address familty is AF_INET6, and if the source address is not found, it returns success, which is also incorrect. Therefore, introduce and use rdma_find_ndev_for_src_ip_rcu() helper function which returns correct success or error status and is also useful for future code refactor in addr_resolve(). Signed-off-by:
-
Moni Shoua authored
The transition is allowed from any state and the atrribute mask must be IB_QP_STATE. Fixes: c32a4f29 ("IB/mlx5: Add support for DC Initiator QP") Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
- 11 Sep, 2018 7 commits
-
-
Michael J. Ruhl authored
HFI IRQ enable bits are not being set correctly. Send context error and DC IRQs are not being enabled correctly. In addition, send context error IRQs are not being delivered. Because of this, send context errors are not being handled correctly when they occur. When setting the IRQ bits, if an IRQ range is used, and the last bit is on a register boundary (bit 63), the calculated index for the final register modification is incorrect (index + 1 vs. index). The incorrect index calculation causes incorrect IRQ bits to be set. In this case the send context error IRQ is NOT enabled. Fix by using the 'last' value rather than the counted 'src' value to determine the final index to use. This satisfies all cases. Fixes: a2f7bbdc ("IB/hfi1: Rework the IRQ API to be more flexible") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
If the set_txreq_header_agh() function returns an error, the exit path is chosen. In this path, the code fails to set the return value. This will cause the caller to not realize an error has occurred. Set the return value correctly in the error path. Signed-off-by:
-
Michael J. Ruhl authored
Hardware limits the maximum number of packets to u16 packets. Match that size for all relevant sequence numbers in the user_sdma engine. Reviewed-by:
-
Michael J. Ruhl authored
Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
-
Michael J. Ruhl authored
pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by:
-
Dan Carpenter authored
The error code isn't set on this path. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michael J. Ruhl authored
The post_send() path determines if it should post directly or, schedule the post for later. The current logic is: if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold post the send else schedule This can allow large requests to call the send engine directly. Large requests can potentially produce a large number of packets prior to returning to the caller, blocking the caller from posting more requests, and allowing better parallel processing. Allow the driver(s) more say in this logic (pass call_send to the driver, rather than examining a return value). Update hfi1/qib logic to schedule the send engine if an RC or UC message is larger than the QP MTU size. Reviewed-by:Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
