This is preparation for the fixes in the following patches.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fix firmware init on Stoney when powerplay is enabled.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Don't init fbdev if we don't have connectors.  E.g., if you have
a PX laptop with the displays attached to an IGP with no driver
support, you may end up with a blank screen rather than falling
back to vesa, etc.

Based on a similar radeon patch from Rob Clark.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes an issue that was noticed on an optimus/prime laptop with
a kernel that was old enough to not support the integrated intel gfx
(which was driving all the outputs), but did have support for the
discrete radeon gpu.  The end result was not falling back to VESA and
leaving the user with a black screen.

(Plus it is kind of silly to create an framebuffer device if there
are no outputs hooked up to the gpu.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Found with lockdep while testing gpu reset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

That somehow got lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>

Firmware is LE.  Need to properly byteswap some of the fields
so they are interpreted correctly by the driver on BE systems.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Makes it clear to the user which power management path is in
use.

v2: make consistent with dpm
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We could pin BOs into invisible VRAM otherwise.

v2: make logic more readable as suggested by Michel

Cc: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

The two macros returns are values which probably are used
in the expression of calculation. Without the brackets
the result of the expression may be wrong.

v2: agd: squash both patches together
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>

Avoid setting pp_enabled if there is no powerplay implementation.
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It can be big, depending on the VM address space size, which is tunable
via the vm_size module parameter.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93721Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to make sure smu buffers are pinned on resume.  This
matches what Fiji does.

Cc: stable@vger.kernel.org
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

this fixes the build on arm.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

 This 2nd pull request includes the following,
   - add configurable plane support and relevant cleanups.
   - fixup kernel panic issue at drm releasing.
   - remove unnecessary codes.

   This has been delayed to resolve a critical issue - which incurrs
   a kernel panic when driver is released - and review it.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fix kernel panic issue at drm releasing
  drm/exynos: crtc: do not wait for the scanout completion
  drm/exynos: mixer: properly update all planes on the same vblank event
  drm/exynos: crtc: rework atomic_{begin,flush}
  drm/exynos: mixer: unify a check for video-processor window
  drm/exynos: mixer: also allow ARGB1555 and ARGB4444
  drm/exynos: mixer: refactor layer setup
  drm/exynos: mixer: remove all static blending setup
  drm/exynos: mixer: set window priority based on zpos
  drm/exynos: make zpos property configurable
  drm/exynos: rename zpos to index

etnaviv fixes.

* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: fix workaround for GC500
  drm/etnaviv: unlock on error in etnaviv_gem_get_iova()

Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

new rockchip bits.

* 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip:
  drm: rockchip: Support Synopsys DW MIPI DSI
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  drm/rockchip: return a true clock rate to adjusted_mode

When the framebuffer is a vmwgfx dma buffer and a proxy surface is
created, the vmw_kms_update_proxy() function requires that the proxy
surface width and the framebuffer pitch are compatible, otherwise
display corruption occurs as seen in gnome-shell/native with software
3D. Since the framebuffer pitch is determined by user-space, allocate
a proxy surface the width of which is based on the framebuffer pitch
rather than on the framebuffer width.

Cc: <stable@vger.kernel.org>
Reported-by: Raphael Hertzog <buxy@kali.org>
Tested-by: Mati Aharoni <muts@kali.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module
would unconditionally throw a bug when checking for a held spinlock
in the command buffer code. Fix this by using a lockdep check.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The new debugfs initialization code fails to build when CONFIG_DEBUG_FS
is disabled:

In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0:
drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init':
drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted
 nouveau_debugfs_init(struct nouveau_drm *)

This fixes the prototypes so we can build it again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs")
Signed-off-by: Dave Airlie <airlied@redhat.com>

v2: remove unneeded pci check
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

A few more misc things for radeon and amdgpu for 4.5:
- TTM fixes for imported buffers
- amdgpu fixes to avoid -ENOMEM in CS ioctl
- CZ UVD and VCE clock force options for debugging video issues
- A couple of ACP prerequisites
- Misc fixes

* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/amdgpu: add irq domain support
  drm/amdgpu/cgs: add an interface to access PCI resources

Most VM BOs end up in the duplicates list, validate it
first make -ENOMEM less likely.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This makes it less likely to run into an ENOMEM because
VM page tables are evicted last.

v2: move the BOs in the LRU tail after validation
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This allows the drivers to move a BO to the end of the LRU
without removing and adding it again.

v2: Make it more robust, handle pinned and swapable BOs as well.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It doesn't make any sense to try to swap out imported BOs.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If we import a BO with an external reservation object we don't
reserve/unreserve it. So we never add it to the LRU causing a possible
denial of service.

v2: fix typo in commit message
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCE DPM works similarly to SCLK DPM.  Add a similar interface
for VCE for forcing the VCE clocks.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UVD DPM works similarly to SCLK DPM.  Add a similar interface
for UVD for forcing the UVD clocks.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when scheduler is enabled, the semaphore isn't used at all.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

The return value should be either negative or zero, no positive.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This patch fixes a kernel panic issue which happened
when drm driver is closed while modetest.

This issue could be reproduced easily by launching modetest
with page flip repeatedly.

The reason is that invalid drm_file object could be accessed by
send_vblank_event function when finishing page flip if the drm_file
object was removed by drm_release and there was a pended page
flip event which was already committed to hardware.

So this patch makes the pended page flip event to be cancelled by
preclose callback which is called at front of drm_release function.

Changelog v2:
- free vblank event objects belonging to the request process,
  increment event space and decrease pending_update when cancelling
  the event
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

This patch removes exynos_drm_crtc_complete_scanout function call
which makes sure for overlay data to be updated to real hardware
when drm driver is released.

With atomic modeset support, it doesn't need the funtion anymore
because atomic modeset interface makes sure that.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch also moves mixer_vsync_set_update() to newly introduced
mixer_atomic_begin/flush callbacks. This ensures that all mixer planes
will be updated on the same vsync event.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>