- 30 Nov, 2021 17 commits
-
-
Paolo Bonzini authored
Generally, kvm->lock is not taken for a long time, but sev_lock_two_vms is different: it takes vCPU locks inside, so userspace can hold it back just by calling a vCPU ioctl. Play it safe and use mutex_lock_killable. Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com> Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Taking the lock is useless since there are no other references, and there are already accesses (e.g. to sev->enc_context_owner) that do not take it. So get rid of it. Reviewed-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211123005036.2954379-12-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
VMs that mirror an encryption context rely on the owner to keep the ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM would cause a dangling ASID: 1. copy context from A to B (gets ref to A) 2. move context from A to L (moves ASID from A to L) 3. close L (releases ASID from L, B still references it) The right way to do the handoff instead is to create a fresh mirror VM on the destination first: 1. copy context from A to B (gets ref to A) [later] 2. close B (releases ref to A) 3. move context from A to L (moves ASID from A to L) 4. copy context from L to M So, catch the situation by adding a count of how many VMs are mirroring this one's encryption context. Fixes: 0b020f5a ("KVM: SEV: Add support for SEV-ES intra host migration") Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Now that we have a facility to lock two VMs with deadlock protection, use it for the creation of mirror VMs as well. One of COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst) would always fail, so the combination is nonsensical and it is okay to return -EBUSY if it is attempted. This sidesteps the question of what happens if a VM is MOVE_ENC_CONTEXT_FROM'd at the same time as it is COPY_ENC_CONTEXT_FROM'd: the locking prevents that from happening. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Reviewed-by:
-
Paolo Bonzini authored
I am putting the tests in sev_migrate_tests because the failure conditions are very similar and some of the setup code can be reused, too. The tests cover both successful creation of a mirror VM, and error conditions. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Message-Id: <20211123005036.2954379-9-pbonzini@redhat.com> Signed-off-by: -
Paolo Bonzini authored
Allow intra-host migration of a mirror VM; the destination VM will be a mirror of the same ASID as the source. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Reviewed-by:
-
Paolo Bonzini authored
This was broken before the introduction of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM, but technically harmless because the region list was unused for a mirror VM. However, it is untidy and it now causes a NULL pointer access when attempting to move the encryption context of a mirror VM. Fixes: 54526d1f ("KVM: x86: Support KVM VMs sharing SEV context") Message-Id: <20211123005036.2954379-7-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Encapsulate the handling of the migration_in_progress flag for both VMs in two functions sev_lock_two_vms and sev_unlock_two_vms. It does not matter if KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM locks the destination struct kvm a bit later, and this change 1) keeps the cleanup chain of labels smaller 2) makes it possible for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM to reuse the logic. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Message-Id: <20211123005036.2954379-6-pbonzini@redhat.com> Signed-off-by: -
Paolo Bonzini authored
list_replace_init cannot be used if the source is an empty list, because "new->next->prev = new" will overwrite "old->next": new old prev = new, next = new prev = old, next = old new->next = old->next prev = new, next = old prev = old, next = old new->next->prev = new prev = new, next = old prev = old, next = new new->prev = old->prev prev = old, next = old prev = old, next = old new->next->prev = new prev = old, next = old prev = new, next = new The desired outcome instead would be to leave both old and new the same as they were (two empty circular lists). Use list_cut_before, which already has the necessary check and is documented to discard the previous contents of the list that will hold the result. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Reviewed-by:
-
Paolo Bonzini authored
Currently, checks for whether VT-d PI can be used refer to the current status of the feature in the current vCPU; or they more or less pick vCPU 0 in case a specific vCPU is not available. However, these checks do not attempt to synchronize with changes to the IRTE. In particular, there is no path that updates the IRTE when APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU that has APICv disabled, if the wakeup occurs because of an IRTE that points to a posted interrupt. To fix this, always go through the VT-d PI path as long as there are assigned devices and APICv is available on both the host and the VM side. Since the relevant condition was copied over three times, take the hint and factor it into a separate function. Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
David Matlack <dmatlack@google.com> Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even if APICv is disabled on the vCPU that receives it. In that case, the interrupt will just cause a vmexit and leave the ON bit set together with the PIR bit corresponding to the interrupt. Right now, the interrupt would not be delivered until APICv is re-enabled. However, fixing this is just a matter of always doing the PIR->IRR synchronization, even if the vCPU has temporarily disabled APICv. This is not a problem for performance, or if anything it is an improvement. First, in the common case where vcpu->arch.apicv_active is true, one fewer check has to be performed. Second, static_call_cond will elide the function call if APICv is not present or disabled. Finally, in the case for AMD hardware we can remove the sync_pir_to_irr callback: it is only needed for apic_has_interrupt_for_ppr, and that function already has a fallback for !APICv. Cc: stable@vger.kernel.org Co-developed-by:
-
Paolo Bonzini authored
If APICv is disabled for this vCPU, assigned devices may still attempt to post interrupts. In that case, we need to cancel the vmentry and deliver the interrupt with KVM_REQ_EVENT. Extend the existing code that handles injection of L1 interrupts into L2 to cover this case as well. vmx_hwapic_irr_update is only called when APICv is active so it would be confusing to add a check for vcpu->arch.apicv_active in there. Instead, just use vmx_set_rvi directly in vmx_sync_pir_to_irr. Cc: stable@vger.kernel.org Reviewed-by:
-
Maciej S. Szmigiero authored
A kvm_page_table_test run with its default settings fails on VMX due to memory region add failure: > ==== Test Assertion Failure ==== > lib/kvm_util.c:952: ret == 0 > pid=10538 tid=10538 errno=17 - File exists > 1 0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947 > 2 0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302 > 3 (inlined by) run_test at kvm_page_table_test.c:374 > 4 0x0000000000409754: for_each_guest_mode at guest_modes.c:53 > 5 0x0000000000401860: main at kvm_page_table_test.c:500 > 6 0x00007f82ae2d8554: ?? ??:0 > 7 0x0000000000401894: _start at ??:? > KVM_SET_USER_MEMORY_REGION IOCTL failed, > rc: -1 errno: 17 > slot: 1 flags: 0x0 > guest_phys_addr: 0xc0000000 size: 0x40000000 This is because the memory range that this test is trying to add (0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000. Looking at the code it seems that guest_test_*phys*_mem variable gets mistakenly overwritten with guest_test_*virt*_mem while trying to adjust the former for alignment. With the correct variable adjusted this test runs successfully. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com> Signed-off-by:
-
Sean Christopherson authored
Account for the '0' being a default, "let KVM choose" period, when determining whether or not the recovery worker needs to be awakened in response to userspace reducing the period. Failure to do so results in the worker not being awakened properly, e.g. when changing the period from '0' to any small-ish value. Fixes: 4dfe4f40 ("kvm: x86: mmu: Make NX huge page recovery period configurable") Cc: stable@vger.kernel.org Cc: Junaid Shahid <junaids@google.com> Signed-off-by:
-
Paolo Bonzini authored
Initialize the mask for PKU permissions as if CR4.PKE=0, avoiding incorrect interpretations of the nested hypervisor's page tables. Cc: stable@vger.kernel.org Signed-off-by: -
Sean Christopherson authored
Drop the "flush" param and return values to/from the TDP MMU's helper for zapping collapsible SPTEs. Because the helper runs with mmu_lock held for read, not write, it uses tdp_mmu_zap_spte_atomic(), and the atomic zap handles the necessary remote TLB flush. Similarly, because mmu_lock is dropped and re-acquired between zapping legacy MMUs and zapping TDP MMUs, kvm_mmu_zap_collapsible_sptes() must handle remote TLB flushes from the legacy MMU before calling into the TDP MMU. Fixes: e2209710 ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated") Signed-off-by:
-
Sean Christopherson authored
Use the yield-safe variant of the TDP MMU iterator when handling an unmapping event from the MMU notifier, as most occurences of the event allow yielding. Fixes: e1eed584 ("KVM: x86/mmu: Allow yielding during MMU notifier unmap/zap, if possible") Cc: stable@vger.kernel.org Signed-off-by:
-
- 26 Nov, 2021 17 commits
-
-
Lai Jiangshan authored
INVLPG operates on guest virtual address, which are represented by vcpu->arch.walk_mmu. In nested virtualization scenarios, kvm_mmu_invlpg() was using the wrong MMU structure; if L2's invlpg were emulated by L0 (in practice, it hardly happen) when nested two-dimensional paging is enabled, the call to ->tlb_flush_gva() would be skipped and the hardware TLB entry would not be invalidated. Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211124122055.64424-5-jiangshanlai@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lai Jiangshan authored
If the is an L1 with nNPT in 32bit, the shadow walk starts with pae_root. Fixes: a717a780 ("KVM: x86/mmu: Support shadowing NPT when 5-level paging is enabled in host) Signed-off-by:
-
Vitaly Kuznetsov authored
With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test may hit RLIMIT_NOFILE limits: # ./kvm_create_max_vcpus KVM_CAP_MAX_VCPU_ID: 4096 KVM_CAP_MAX_VCPUS: 1024 Testing creating 1024 vCPUs, with IDs 0...1023. /dev/kvm not available (errno: 24), skipping test Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE capability which is generally not needed to run kvm selftests (but without raising the limit the test is doomed to fail anyway). Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20211123135953.667434-1-vkuznets@redhat.com> [Skip the test if the hard limit can be raised. - Paolo] Reviewed-by:
-
Vitaly Kuznetsov authored
Commit 63f5a190 ("KVM: x86: Alert userspace that KVM_SET_CPUID{,2} after KVM_RUN is broken") officially deprecated KVM_SET_CPUID{,2} ioctls after first successful KVM_RUN and promissed to make this sequence forbiden in 5.16. It's time to fulfil the promise. Signed-off-by:
-
Vitaly Kuznetsov authored
hyperv_features's sole purpose is to test access to various Hyper-V MSRs and hypercalls with different CPUID data. As KVM_SET_CPUID2 after KVM_RUN is deprecated and soon-to-be forbidden, avoid it by re-creating test VM for each sub-test. Signed-off-by:
-
Sean Christopherson authored
Fully emulate a guest TLB flush on nested VM-Enter which changes vpid12, i.e. L2's VPID, instead of simply doing INVVPID to flush real hardware's TLB entries for vpid02. From L1's perspective, changing L2's VPID is effectively a TLB flush unless "hardware" has previously cached entries for the new vpid12. Because KVM tracks only a single vpid12, KVM doesn't know if the new vpid12 has been used in the past and so must treat it as a brand new, never been used VPID, i.e. must assume that the new vpid12 represents a TLB flush from L1's perspective. For example, if L1 and L2 share a CR3, the first VM-Enter to L2 (with a VPID) is effectively a TLB flush as hardware/KVM has never seen vpid12 and thus can't have cached entries in the TLB for vpid12. Reported-by:
Lai Jiangshan <jiangshanlai+lkml@gmail.com> Fixes: 5c614b35 ("KVM: nVMX: nested VPID emulation") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Like KVM_REQ_TLB_FLUSH_CURRENT, the GUEST variant needs to be serviced at nested transitions, as KVM doesn't track requests for L1 vs L2. E.g. if there's a pending flush when a nested VM-Exit occurs, then the flush was requested in the context of L2 and needs to be handled before switching to L1, otherwise the flush for L2 would effectiely be lost. Opportunistically add a helper to handle CURRENT and GUEST as a pair, the logic for when they need to be serviced is identical as both requests are tied to L1 vs. L2, the only difference is the scope of the flush. Reported-by:
-
Sean Christopherson authored
Flush the current VPID when handling KVM_REQ_TLB_FLUSH_GUEST instead of always flushing vpid01. Any TLB flush that is triggered when L2 is active is scoped to L2's VPID (if it has one), e.g. if L2 toggles CR4.PGE and L1 doesn't intercept PGE writes, then KVM's emulation of the TLB flush needs to be applied to L2's VPID. Reported-by:
-
Paolo Bonzini authored
The capability, albeit present, was never exposed via KVM_CHECK_EXTENSION. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Cc: Peter Gonda <pgonda@google.com> Signed-off-by:
-
Paolo Bonzini authored
Ensure that the ASID are freed promptly, which becomes more important when more tests are added to this file. Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: -
Paolo Bonzini authored
KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM leaves the source VM in a dead state, so migrating back to the original source VM fails the ioctl. Adjust the test. Signed-off-by: -
Paolo Bonzini authored
Synchronize the two calls to kvm_x86_sync_pir_to_irr. The one in the reenter-guest fast path invoked the callback unconditionally even if LAPIC is present but disabled. In this case, there are no interrupts to deliver, and therefore posted interrupts can be ignored. Cc: stable@vger.kernel.org Signed-off-by: -
Paolo Bonzini authored
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached and kvm_write_guest_offset_cached must expect the read/write to fail, and therefore it is possible to just return early with an error value. Signed-off-by: -
Paolo Bonzini authored
An uninitialized gfn_to_hva_cache has ghc->len == 0, which causes the accessors to croak very loudly. While a BUG_ON is definitely _too_ loud and a bug on its own, there is indeed an issue of using the caches in such a way that they could not have been initialized, because ghc->gpa == 0 might match and thus kvm_gfn_to_hva_cache_init would not be called. For the vmcs12_cache, the solution is simply to invoke kvm_gfn_to_hva_cache_init unconditionally: we already know that the cache does not match the current VMCS pointer. For the shadow_vmcs12_cache, there is no similar condition that checks the VMCS link pointer, so invalidate the cache on VMXON. Fixes: cee66664 ("KVM: nVMX: Use a gfn_to_hva_cache for vmptrld") Acked-by:
David Woodhouse <dwmw@amazon.co.uk> Reported-by: syzbot+7b7db8bb4db6fd5e157b@syzkaller.appspotmail.com Signed-off-by:
-
Paolo Bonzini authored
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.16, take #2 - Fix constant sign extension affecting TCR_EL2 and preventing running on ARMv8.7 models due to spurious bits being set - Fix use of helpers using PSTATE early on exit by always sampling it as soon as the exit takes place - Move pkvm's 32bit handling into a common helper
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv fixes for 5.16, take #1 - Fix incorrect KVM_MAX_VCPUS value - Unmap stage2 mapping when deleting/moving a memslot (This was due to empty kvm_arch_flush_shadow_memslot())
-
- 25 Nov, 2021 1 commit
-
-
Catalin Marinas authored
Having a signed (1 << 31) constant for TCR_EL2_RES1 and CPTR_EL2_TCPAC causes the upper 32-bit to be set to 1 when assigning them to a 64-bit variable. Bit 32 in TCR_EL2 is no longer RES0 in ARMv8.7: with FEAT_LPA2 it changes the meaning of bits 49:48 and 9:8 in the stage 1 EL2 page table entries. As a result of the sign-extension, a non-VHE kernel can no longer boot on a model with ARMv8.7 enabled. CPTR_EL2 still has the top 32 bits RES0 but we should preempt any future problems Make these top bit constants unsigned as per commit df655b75 ("arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1"). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Chris January <Chris.January@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125152014.2806582-1-catalin.marinas@arm.com
-
- 24 Nov, 2021 2 commits
-
-
Marc Zyngier authored
Protected KVM is trying to turn AArch32 exceptions into an illegal exception entry. Unfortunately, it does that in a way that is a bit abrupt, and too early for PSTATE to be available. Instead, move it to the fixup code, which is a more reasonable place for it. This will also be useful for the NV code. Reviewed-by:
Fuad Tabba <tabba@google.com> Signed-off-by:
-
Marc Zyngier authored
In order to be able to use primitives such as vcpu_mode_is_32bit(), we need to synchronize the guest PSTATE. However, this is currently done deep into the bowels of the world-switch code, and we do have helpers evaluating this much earlier (__vgic_v3_perform_cpuif_access and handle_aarch32_guest, for example). Move the saving of the guest pstate into the early fixups, which cures the first issue. The second one will be addressed separately. Tested-by:
-
- 22 Nov, 2021 2 commits
-
-
Anup Patel authored
The KVM_MAX_VCPUS value is supposed to be aligned with number of VMID bits in the hgatp CSR but the current KVM_MAX_VCPUS value is aligned with number of ASID bits in the satp CSR. Fixes: 99cdc6c1 ("RISC-V: Add initial skeletal KVM support") Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-by:
Atish Patra <atishp@rivosinc.com>
-
Sean Christopherson authored
Unmap stage2 page tables when a memslot is being deleted or moved. It's the architectures' responsibility to ensure existing mappings are removed when kvm_arch_flush_shadow_memslot() returns. Fixes: 9d05c1fe ("RISC-V: KVM: Implement stage2 page table programming") Signed-off-by:
-
- 21 Nov, 2021 1 commit
-
-
Linus Torvalds authored
-
