- 22 Jul, 2020 40 commits
-
-
Lingling Xu authored
commit 8bdd79da upstream. The watchdog counter consists of WDG_LOAD_LOW and WDG_LOAD_HIGH, which would be loaded to watchdog counter once writing WDG_LOAD_LOW. Fixes: ac177501 ("spi: sprd: Add the support of restarting the system") Signed-off-by:
Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20200602082415.5848-1-zhang.lyra@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit aadf9dce upstream. The trace symbol printer (__print_symbolic()) ignores symbols that map to an empty string and prints the hex value instead. Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid this. Fixes: b54a134a ("rxrpc: Fix handling of enums-to-string translation in tracing") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 2f3fead6 upstream. Currently target_copy() is used only for sending linger pings, so this doesn't come up, but generally omitting recovery_deletes can result in unneeded resends (force_resend in calc_target()). Fixes: ae78dd81 ("libceph: make RECOVERY_DELETES feature create a new interval") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Sergey Senozhatsky authored
commit ab6f762f upstream. printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/Reported-by:
Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by:
Jann Horn <jannh@google.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit baedb87d upstream. Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee15 ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by:
Ali Saidi <alisaidi@amazon.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Vincent Guittot authored
commit 01cfcde9 upstream. task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
-
Mathieu Desnoyers authored
commit ce3614da upstream. While integrating rseq into glibc and replacing glibc's sched_getcpu implementation with rseq, glibc's tests discovered an issue with incorrect __rseq_abi.cpu_id field value right after the first time a newly created process issues sched_setaffinity. For the records, it triggers after building glibc and running tests, and then issuing: for x in {1..2000} ; do posix/tst-affinity-static & done and shows up as: error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 This is caused by the scheduler invoking __set_task_cpu() directly from sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which is done by set_task_cpu(). Add the missing rseq_migrate() to both functions. The only other direct use of __set_task_cpu() is done by init_idle(), which does not involve a user-space task. Based on my testing with the glibc test-case, just adding rseq_migrate() to wake_up_new_task() is sufficient to fix the observed issue. Also add it to sched_fork() to keep things consistent. The reason why this never triggered so far with the rseq/basic_test selftest is unclear. The current use of sched_getcpu(3) does not typically require it to be always accurate. However, use of the __rseq_abi.cpu_id field within rseq critical sections requires it to be accurate. If it is not accurate, it can cause corruption in the per-cpu data targeted by rseq critical sections in user-space. Reported-By:
Florian Weimer <fweimer@redhat.com> Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Will Deacon authored
commit 15956689 upstream. Although we zero the upper bits of x0 on entry to the kernel from an AArch32 task, we do not clear them on the exception return path and can therefore expose 64-bit sign extended syscall return values to userspace via interfaces such as the 'perf_regs' ABI, which deal exclusively with 64-bit registers. Explicitly clear the upper 32 bits of x0 on return from a compat system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Cc: Luis Machado <luis.machado@linaro.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Will Deacon authored
commit ac2081cd upstream. Although the arm64 single-step state machine can be fast-forwarded in cases where we wish to generate a SIGTRAP without actually executing an instruction, this has two major limitations outside of simply skipping an instruction due to emulation. 1. Stepping out of a ptrace signal stop into a signal handler where SIGTRAP is blocked. Fast-forwarding the stepping state machine in this case will result in a forced SIGTRAP, with the handler reset to SIG_DFL. 2. The hardware implicitly fast-forwards the state machine when executing an SVC instruction for issuing a system call. This can interact badly with subsequent ptrace stops signalled during the execution of the system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt the stepping state by updating the PSTATE for the tracee. Resolve both of these issues by injecting a pseudo-singlestep exception on entry to a signal handler and also on return to userspace following a system call. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Tested-by:
Luis Machado <luis.machado@linaro.org> Reported-by:
Keno Fischer <keno@juliacomputing.com> Signed-off-by:
-
Will Deacon authored
commit 3a5a4366 upstream. Luis reports that, when reverse debugging with GDB, single-step does not function as expected on arm64: | I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP | request by GDB won't execute the underlying instruction. As a consequence, | the PC doesn't move, but we return a SIGTRAP just like we would for a | regular successful PTRACE_SINGLESTEP request. The underlying problem is that when the CPU register state is restored as part of a reverse step, the SPSR.SS bit is cleared and so the hardware single-step state can transition to the "active-pending" state, causing an unexpected step exception to be taken immediately if a step operation is attempted. In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate accessible by the GPR regset, but it's a bit late for that now. Instead, simply prevent userspace from configuring the bit to a value which is inconsistent with the TIF_SINGLESTEP state for the task being traced. Cc: <stable@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Keno Fischer <keno@juliacomputing.com> Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.orgReported-by:
-
Finley Xiao authored
commit 371a3bc7 upstream. The function cpu_power_to_freq is used to find a frequency and set the cooling device to consume at most the power to be converted. For example, if the power to be converted is 80mW, and the em table is as follow. struct em_cap_state table[] = { /* KHz mW */ { 1008000, 36, 0 }, { 1200000, 49, 0 }, { 1296000, 59, 0 }, { 1416000, 72, 0 }, { 1512000, 86, 0 }, }; The target frequency should be 1416000KHz, not 1512000KHz. Fixes: 349d39dc ("thermal: cpu_cooling: merge frequency and power tables") Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.comSigned-off-by:
-
Michał Mirosław authored
commit b037d60a upstream. Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue. Cc: stable@vger.kernel.org Fixes: 099343c6 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.1592998403.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Krzysztof Kozlowski authored
commit f5e5677c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fb ("dma: Add Freescale eDMA engine driver support") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.orgSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
commit e78e1fdb upstream. Connecting master to an output port when GTH driver module is not loaded triggers a NULL dereference: > RIP: 0010:intel_th_set_output+0x35/0x70 [intel_th] > Call Trace: > ? sth_stm_link+0x12/0x20 [intel_th_sth] > stm_source_link_store+0x164/0x270 [stm_core] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make sure the module in question is loaded and return an error if not. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 39f40346 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices") Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Ammy Yi <ammy.yi@intel.com> Tested-by:
-
Alexander Shishkin authored
commit fd73d74a upstream. This adds support for the Trace Hub in Emmitsburg PCH. Signed-off-by:
-
Alexander Shishkin authored
commit 6227585d upstream. This adds support for the Trace Hub in Tiger Lake PCH-H. Signed-off-by:
-
Alexander Shishkin authored
commit 203c1f61 upstream. This adds support for the Trace Hub in Jasper Lake CPU. Signed-off-by:
-
Aneesh Kumar K.V authored
commit 192b6a78 upstream. Even if the IAMR value denies execute access, the current code returns true from pkey_access_permitted() for an execute permission check, if the AMR read pkey bit is cleared. This results in repeated page fault loop with a test like below: #define _GNU_SOURCE #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> #include <inttypes.h> #include <assert.h> #include <malloc.h> #include <unistd.h> #include <pthread.h> #include <sys/mman.h> #ifdef SYS_pkey_mprotect #undef SYS_pkey_mprotect #endif #ifdef SYS_pkey_alloc #undef SYS_pkey_alloc #endif #ifdef SYS_pkey_free #undef SYS_pkey_free #endif #undef PKEY_DISABLE_EXECUTE #define PKEY_DISABLE_EXECUTE 0x4 #define SYS_pkey_mprotect 386 #define SYS_pkey_alloc 384 #define SYS_pkey_free 385 #define PPC_INST_NOP 0x60000000 #define PPC_INST_BLR 0x4e800020 #define PROT_RWX (PROT_READ | PROT_WRITE | PROT_EXEC) static int sys_pkey_mprotect(void *addr, size_t len, int prot, int pkey) { return syscall(SYS_pkey_mprotect, addr, len, prot, pkey); } static int sys_pkey_alloc(unsigned long flags, unsigned long access_rights) { return syscall(SYS_pkey_alloc, flags, access_rights); } static int sys_pkey_free(int pkey) { return syscall(SYS_pkey_free, pkey); } static void do_execute(void *region) { /* jump to region */ asm volatile( "mtctr %0;" "bctrl" : : "r"(region) : "ctr", "lr"); } static void do_protect(void *region) { size_t pgsize; int i, pkey; pgsize = getpagesize(); pkey = sys_pkey_alloc(0, PKEY_DISABLE_EXECUTE); assert (pkey > 0); /* perform mprotect */ assert(!sys_pkey_mprotect(region, pgsize, PROT_RWX, pkey)); do_execute(region); /* free pkey */ assert(!sys_pkey_free(pkey)); } int main(int argc, char **argv) { size_t pgsize, numinsns; unsigned int *region; int i; /* allocate memory region to protect */ pgsize = getpagesize(); region = memalign(pgsize, pgsize); assert(region != NULL); assert(!mprotect(region, pgsize, PROT_RWX)); /* fill page with NOPs with a BLR at the end */ numinsns = pgsize / sizeof(region[0]); for (i = 0; i < numinsns - 1; i++) region[i] = PPC_INST_NOP; region[i] = PPC_INST_BLR; do_protect(region); return EXIT_SUCCESS; } The fix is to only check the IAMR for an execute check, the AMR value is not relevant. Fixes: f2407ef3 ("powerpc: helper to validate key-access permissions of a pte") Cc: stable@vger.kernel.org # v4.16+ Reported-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Add detail to change log, tweak wording & formatting] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200712132047.1038594-1-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Vishwas M authored
commit 14b0e83d upstream. This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by:
Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Andreas Schwab authored
commit 0cac21b0 upstream. With the current 8KB stack size there are frequent overflows in a 64-bit configuration. We may split IRQ stacks off in the future, but this fixes a number of issues right now. Signed-off-by:
Andreas Schwab <schwab@suse.de> Reviewed-by:
Anup Patel <anup@brainfault.org> [Palmer: mention irqstack in the commit text] Fixes: 7db91e57 ("RISC-V: Task implementation") Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Huacai Chen authored
Commit ed26aacf ("mips: Add udelay lpj numbers adjustment") has backported to 4.4~5.4, but the "struct cpufreq_freqs" (and also the cpufreq notifier machanism) of 4.4~4.19 are different from the upstream kernel. These differences cause build errors, and this patch can fix the build. Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Stable <stable@vger.kernel.org> # 4.4/4.9/4.14/4.19 Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Frederic Weisbecker authored
commit e2a71bde upstream. When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9 ("timers: Switch to a non-cascading wheel") Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
-
Frederic Weisbecker authored
commit 30c66fc3 upstream. When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Signed-off-by:
Anna-Maria Behnsen <anna-maria@linutronix.de> Tested-by:
Juri Lelli <juri.lelli@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.orgSigned-off-by:
-
Esben Haabendal authored
commit bf12fdf0 upstream. While e3a3c3a2 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms. This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms. This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet). Fixes: 26dac3c4 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by:
Esben Haabendal <esben@geanix.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.comSigned-off-by:
-
David Pedersen authored
commit 17d51429 upstream. This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by:
David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alexander Usyskin authored
commit e852c2c2 upstream. It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver(). Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return; The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests' Nevertheless the fix is correct also for the upstream. Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/ Cc: <stable@vger.kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.comSigned-off-by:
-
Wade Mealing authored
commit 853eab68 upstream. Turns out that the permissions for 0400 really are what we want here, otherwise any user can read from this file. [fixed formatting, added changelog, and made attribute static - gregkh] Reported-by:
Wade Mealing <wmealing@redhat.com> Cc: stable <stable@vger.kernel.org> Fixes: f40609d1 ("zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1847832Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Acked-by:
Minchan Kim <minchan@kernel.org> Link: https://lore.kernel.org/r/20200617114946.GA2131650@kroah.comSigned-off-by:
-
Chirantan Ekbote authored
commit 31070f6c upstream. The ioctl encoding for this parameter is a long but the documentation says it should be an int and the kernel drivers expect it to be an int. If the fuse driver treats this as a long it might end up scribbling over the stack of a userspace process that only allocated enough space for an int. This was previously discussed in [1] and a patch for fuse was proposed in [2]. From what I can tell the patch in [2] was nacked in favor of adding new, "fixed" ioctls and using those from userspace. However there is still no "fixed" version of these ioctls and the fact is that it's sometimes infeasible to change all userspace to use the new one. Handling the ioctls specially in the fuse driver seems like the most pragmatic way for fuse servers to support them without causing crashes in userspace applications that call them. [1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/ [2]: https://sourceforge.net/p/fuse/mailman/message/31771759/Signed-off-by:
Chirantan Ekbote <chirantan@chromium.org> Fixes: 59efec7b ("fuse: implement ioctl support") Cc: <stable@vger.kernel.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit 81a33c1e upstream. The check if user has changed the overlay file was wrong, causing unneeded call to ovl_change_flags() including taking f_lock on every file access. Fixes: d9899030 ("ovl: do not generate duplicate fsnotify events for "fake" path") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Amir Goldstein authored
commit 124c2de2 upstream. Decoding a lower directory file handle to overlay path with cold inode/dentry cache may go as follows: 1. Decode real lower file handle to lower dir path 2. Check if lower dir is indexed (was copied up) 3. If indexed, get the upper dir path from index 4. Lookup upper dir path in overlay 5. If overlay path found, verify that overlay lower is the lower dir from step 1 On failure to verify step 5 above, user will get an ESTALE error and a WARN_ON will be printed. A mismatch in step 5 could be a result of lower directory that was renamed while overlay was offline, after that lower directory has been copied up and indexed. This is a scripted reproducer based on xfstest overlay/052: # Create lower subdir create_dirs create_test_files $lower/lowertestdir/subdir mount_dirs # Copy up lower dir and encode lower subdir file handle touch $SCRATCH_MNT/lowertestdir test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle # Rename lower dir offline unmount_dirs mv $lower/lowertestdir $lower/lowertestdir.new/ mount_dirs # Attempt to decode lower subdir file handle test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle Since this WARN_ON() can be triggered by user we need to relax it. Fixes: 4b91c30a ("ovl: lookup connected ancestor of dir in inode cache") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by:
-
youngjun authored
commit 24f14009 upstream. When "ovl_is_inuse" true case, trap inode reference not put. plus adding the comment explaining sequence of ovl_is_inuse after ovl_setup_trap. Fixes: 0be0bfd2 ("ovl: fix regression caused by overlapping layers detection") Cc: <stable@vger.kernel.org> # v4.19+ Reviewed-by:
youngjun <her0gyugyu@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
commit d8edf8eb upstream. This driver calls ioremap() in probe, but it misses calling iounmap() in probe's error handler and remove. Add the missed calls to fix it. Fixes: 47d37d6f ("serial: Add auart driver for i.MX23/28") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200709135608.68290-1-hslester96@gmail.comSigned-off-by:
-
Alexander Lobakin authored
commit 897c44f0 upstream. rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself. Fixes: 1b637046 ("virtio_console: Add support for remoteproc serial") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Reviewed-by:
Amit Shah <amit@kernel.org> Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREBjaqBOpAUS7ol4NnZYvSVwmTsCG0Ohyfvta-ygw6HMHcoeKK0C3QFiAO_Q=@pm.meSigned-off-by:
-
Hans de Goede authored
commit 59d1d2e8 upstream. Check the passed in capabilities against VMMDEV_GUEST_CAPABILITIES_MASK instead of against VMMDEV_EVENT_VALID_EVENT_MASK. This tightens the allowed mask from 0x7ff to 0x7. Fixes: 0ba002bc ("virt: Add vboxguest driver for Virtual Box Guest integration") Cc: stable@vger.kernel.org Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200709120858.63928-3-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
commit f794db68 upstream. Until this commit the mainline kernel version (this version) of the vboxguest module contained a bug where it defined VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using _IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of _IO(V, ...) as the out of tree VirtualBox upstream version does. Since the VirtualBox userspace bits are always built against VirtualBox upstream's headers, this means that so far the mainline kernel version of the vboxguest module has been failing these 2 ioctls with -ENOTTY. I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to not hit that one and sofar the vboxguest driver has failed to actually log any log messages passed it through VBGL_IOCTL_LOG. This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG defines to match the out of tree VirtualBox upstream vboxguest version, while keeping compatibility with the old wrong request defines so as to not break the kernel ABI in case someone has been using the old request defines. Fixes: f6ddd094 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI") Cc: stable@vger.kernel.org Acked-by:
-
AceLan Kao authored
commit da6902e5 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit 08d4ef5c upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Igor Moura authored
commit 5d0136f8 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by:
Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Hilliard authored
commit 5c45d04c upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by:
James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by:
-
Johan Hovold authored
commit e7b931be upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by:
-
