- 13 Apr, 2022 8 commits
-
-
Sean Christopherson authored
Derive the mask of RWX bits reported on EPT violations from the mask of RWX bits that are shoved into EPT entries; the layout is the same, the EPT violation bits are simply shifted by three. Use the new shift and a slight copy-paste of the mask derivation instead of completely open coding the same to convert between the EPT entry bits and the exit qualification when synthesizing a nested EPT Violation. No functional change intended. Cc: SU Hang <darcy.sh@antgroup.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220329030108.97341-3-darcy.sh@antgroup.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
SU Hang authored
Using self-expressing macro definition EPT_VIOLATION_GVA_VALIDATION and EPT_VIOLATION_GVA_TRANSLATED instead of 0x180 in FNAME(walk_addr_generic)(). Signed-off-by:
SU Hang <darcy.sh@antgroup.com> Reviewed-by:
-
Wanpeng Li authored
When the "nopv" command line parameter is used, it should not waste memory for kvmclock. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1646727529-11774-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Peng Hao authored
Remove redundant parentheses. Signed-off-by:
Peng Hao <flyingpeng@tencent.com> Message-Id: <20220228030902.88465-1-flyingpeng@tencent.com> Signed-off-by:
-
Peng Hao authored
Adjust the field pkru_mask to the back of direct_map to make up 8-byte alignment.This reduces the size of kvm_mmu by 8 bytes. Signed-off-by:
-
Like Xu authored
+WARNING: Possible comma where semicolon could be used +#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700: ++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER, ++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr); Fixes: 25eaeebe ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND") Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-4-likexu@tencent.com> Signed-off-by:
-
Like Xu authored
The header lapic.h is included more than once, remove one of them. Signed-off-by:
-
Paolo Bonzini authored
Merge branch for features that did not make it into 5.18: * New ioctls to get/set TSC frequency for a whole VM * Allow userspace to opt out of hypercall patching Nested virtualization improvements for AMD: * Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE, nested vGIF) * Allow AVIC to co-exist with a nested guest running * Fixes for LBR virtualizations when a nested guest is running, and nested LBR virtualization support * PAUSE filtering for nested hypervisors Guest support: * Decoupling of vcpu_is_preempted from PV spinlocks Signed-off-by:
-
- 11 Apr, 2022 5 commits
-
-
Vitaly Kuznetsov authored
The following WARN is triggered from kvm_vm_ioctl_set_clock(): WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20 Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021 RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm] ... Call Trace: <TASK> ? kvm_write_guest+0x114/0x120 [kvm] kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm] kvm_arch_vm_ioctl+0xa26/0xc50 [kvm] ? schedule+0x4e/0xc0 ? __cond_resched+0x1a/0x50 ? futex_wait+0x166/0x250 ? __send_signal+0x1f1/0x3d0 kvm_vm_ioctl+0x747/0xda0 [kvm] ... The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if mark_page_dirty() is called without an active vCPU") but the change seems to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's no real need to actually write to guest memory to invalidate TSC page, this can be done by the first vCPU which goes through kvm_guest_time_update(). Reported-by:Maxim Levitsky <mlevitsk@redhat.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
-
Suravee Suthikulpanit authored
Since current AVIC implementation cannot support encrypted memory, inhibit AVIC for SEV-enabled guest. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com> Signed-off-by:
-
Like Xu authored
+new file mode 100644 +WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 +#27: FILE: Documentation/virt/kvm/x86/errata.rst:1: Opportunistically update all other non-added KVM documents and remove a new extra blank line at EOF for x86/errata.rst. Signed-off-by:
-
Like Xu authored
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by:
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv fixes for 5.18, take #1 - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c
-
- 09 Apr, 2022 4 commits
-
-
Heiko Stuebner authored
vcpu_fp uses the riscv_isa_extension mechanism which gets defined in hwcap.h but doesn't include that head file. While it seems to work in most cases, in certain conditions this can lead to build failures like ../arch/riscv/kvm/vcpu_fp.c: In function ‘kvm_riscv_vcpu_fp_reset’: ../arch/riscv/kvm/vcpu_fp.c:22:13: error: implicit declaration of function ‘riscv_isa_extension_available’ [-Werror=implicit-function-declaration] 22 | if (riscv_isa_extension_available(&isa, f) || | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/riscv/kvm/vcpu_fp.c:22:49: error: ‘f’ undeclared (first use in this function) 22 | if (riscv_isa_extension_available(&isa, f) || Fix this by simply including the necessary header. Fixes: 0a86512d ("RISC-V: KVM: Factor-out FP virtualization into separate sources") Signed-off-by:Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Anup Patel <anup@brainfault.org>
-
Anup Patel authored
The guest_hang() function is used as the default exception handler for various KVM selftests applications by setting it's address in the vstvec CSR. The vstvec CSR requires exception handler base address to be at least 4-byte aligned so this patch fixes alignment of the guest_hang() function. Fixes: 3e06cdf1 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by:
Anup Patel <apatel@ventanamicro.com> Tested-by:
Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by:
-
Anup Patel authored
Supporting hardware updates of PTE A and D bits is optional for any RISC-V implementation so current software strategy is to always set these bits in both G-stage (hypervisor) and VS-stage (guest kernel). If PTE A and D bits are not set by software (hypervisor or guest) then RISC-V implementations not supporting hardware updates of these bits will cause traps even for perfectly valid PTEs. Based on above explanation, the VS-stage page table created by various KVM selftest applications is not correct because PTE A and D bits are not set. This patch fixes VS-stage page table programming of PTE A and D bits for KVM selftests. Fixes: 3e06cdf1 ("KVM: selftests: Add initial support for RISC-V 64-bit") Signed-off-by:
-
Anup Patel authored
We might have RISC-V systems (such as QEMU) where VMID is not part of the TLB entry tag so these systems will have to flush all TLB entries upon any change in hgatp.VMID. Currently, we zero-out hgatp CSR in kvm_arch_vcpu_put() and we re-program hgatp CSR in kvm_arch_vcpu_load(). For above described systems, this will flush all TLB entries whenever VCPU exits to user-space hence reducing performance. This patch fixes above described performance issue by not clearing hgatp CSR in kvm_arch_vcpu_put(). Fixes: 34bde9d8 ("RISC-V: KVM: Implement VCPU world-switch") Cc: stable@vger.kernel.org Signed-off-by:
-
- 08 Apr, 2022 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #1 - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above
-
- 07 Apr, 2022 4 commits
-
-
Oliver Upton authored
In order to correctly destroy a VM, all references to the VM must be freed. The arch_timer selftest creates a VGIC for the guest, which itself holds a reference to the VM. Close the GIC FD when cleaning up a VM. Signed-off-by:
Oliver Upton <oupton@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
-
Oliver Upton authored
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by hardware) to reduce the overhead of guest exits. However, the test does not actually close the GIC fd when cleaning up the VM between test iterations, meaning that the VM is never actually destroyed in the kernel. While this is generally a bad idea, the bug was detected from the kernel spewing about duplicate debugfs entries as subsequent VMs happen to reuse the same FD even though the debugfs directory is still present. Abstract away the notion of setup/cleanup of the GIC FD from the test by creating arch-specific helpers for test setup/cleanup. Close the GIC FD on VM cleanup and do nothing for the other architectures. Fixes: c340f789 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM") Reviewed-by:
Jing Zhang <jingzhangos@google.com> Signed-off-by:
-
Oliver Upton authored
Unfortunately, there is no guarantee that KVM was able to instantiate a debugfs directory for a particular VM. To that end, KVM shouldn't even attempt to create new debugfs files in this case. If the specified parent dentry is NULL, debugfs_create_file() will instantiate files at the root of debugfs. For arm64, it is possible to create the vgic-state file outside of a VM directory, the file is not cleaned up when a VM is destroyed. Nonetheless, the corresponding struct kvm is freed when the VM is destroyed. Nip the problem in the bud for all possible errant debugfs file creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing, debugfs_create_file() will fail instead of creating the file in the root directory. Cc: stable@kernel.org Fixes: 929f45e3 ("kvm: no need to check return value of debugfs_create functions") Signed-off-by:
-
Andrew Jones authored
When testing a kernel with commit a5905d6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") get-reg-list output vregs: Number blessed registers: 234 vregs: Number registers: 238 vregs: There are 1 new registers. Consider adding them to the blessed reg list with the following lines: KVM_REG_ARM_FW_REG(3), vregs: PASS ... That output inspired two changes: 1) add the new register to the blessed list and 2) explain why "Number registers" is actually four larger than "Number blessed registers" (on the system used for testing), even though only one register is being stated as new. The reason is that some registers are host dependent and they get filtered out when comparing with the blessed list. The system used for the test apparently had three filtered registers. Signed-off-by:
Andrew Jones <drjones@redhat.com> Acked-by:
-
- 06 Apr, 2022 8 commits
-
-
Paolo Bonzini authored
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing ring->dirty_gfns and setting it to NULL. Afterwards, it calls kvm_arch_vcpu_destroy(). However, if closing the file descriptor races with KVM_RUN in such away that vcpu->arch.st.preempted == 0, the following call stack leads to a NULL pointer dereference in kvm_dirty_run_push(): mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171 kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline] kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618 vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211 vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985 kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] The fix is to release the dirty page ring after kvm_arch_vcpu_destroy has run. Reported-by:
Qiuhao Li <qiuhao@sysec.org> Reported-by:
Gaoning Pan <pgn@zju.edu.cn> Reported-by:
Yongkang Jia <kangel@zju.edu.cn> Cc: stable@vger.kernel.org Signed-off-by:
-
Reiji Watanabe authored
Introduce a test for aarch64 that ensures non-mixed-width vCPUs (all 64bit vCPUs or all 32bit vcPUs) can be configured, and mixed-width vCPUs cannot be configured. Reviewed-by:
Reiji Watanabe <reijiw@google.com> Reviewed-by:
-
Reiji Watanabe authored
KVM allows userspace to configure either all EL1 32bit or 64bit vCPUs for a guest. At vCPU reset, vcpu_allowed_register_width() checks if the vcpu's register width is consistent with all other vCPUs'. Since the checking is done even against vCPUs that are not initialized (KVM_ARM_VCPU_INIT has not been done) yet, the uninitialized vCPUs are erroneously treated as 64bit vCPU, which causes the function to incorrectly detect a mixed-width VM. Introduce KVM_ARCH_FLAG_EL1_32BIT and KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED bits for kvm->arch.flags. A value of the EL1_32BIT bit indicates that the guest needs to be configured with all 32bit or 64bit vCPUs, and a value of the REG_WIDTH_CONFIGURED bit indicates if a value of the EL1_32BIT bit is valid (already set up). Values in those bits are set at the first KVM_ARM_VCPU_INIT for the guest based on KVM_ARM_VCPU_EL1_32BIT configuration for the vCPU. Check vcpu's register width against those new bits at the vcpu's KVM_ARM_VCPU_INIT (instead of against other vCPUs' register width). Fixes: 66e94d5c ("KVM: arm64: Prevent mixed-width VM creation") Signed-off-by:
-
Yu Zhe authored
Remove unnecessary casts. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
Oliver Upton authored
It is possible to take a stage-2 permission fault on a page larger than PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM eagerly maps at the largest possible block size. When dirty logging is enabled on a memslot, KVM does *not* eagerly split these 2M stage-2 mappings and instead clears the write bit on the pte. Since dirty logging is always performed at PAGE_SIZE granularity, KVM lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2 fault handler. This operation must be done under the write lock. Since commit f783ef1c ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging"), the stage-2 fault handler conditionally takes the read lock on permission faults with dirty logging enabled. To that end, it is possible to split a 2M block mapping while only holding the read lock. The problem is demonstrated by running kvm_page_table_test with 2M anonymous HugeTLB, which splats like so: WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158 [...] Call trace: stage2_map_walk_leaf+0x124/0x158 stage2_map_walker+0x5c/0xf0 __kvm_pgtable_walk+0x100/0x1d4 __kvm_pgtable_walk+0x140/0x1d4 __kvm_pgtable_walk+0x140/0x1d4 kvm_pgtable_walk+0xa0/0xf8 kvm_pgtable_stage2_map+0x15c/0x198 user_mem_abort+0x56c/0x838 kvm_handle_guest_abort+0x1fc/0x2a4 handle_exit+0xa4/0x120 kvm_arch_vcpu_ioctl_run+0x200/0x448 kvm_vcpu_ioctl+0x588/0x664 __arm64_sys_ioctl+0x9c/0xd4 invoke_syscall+0x4c/0x144 el0_svc_common+0xc4/0x190 do_el0_svc+0x30/0x8c el0_svc+0x28/0xcc el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a4/0x1a8 Fix the issue by only acquiring the read lock if the guest faulted on a PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking bugs in future changes. Fixes: f783ef1c ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging") Cc: Jing Zhang <jingzhangos@google.com> Signed-off-by:
-
Oliver Upton authored
We already sanitize the guest's PSCI version when it is being written by userspace, rejecting unsupported version numbers. Additionally, the 'minor' parameter to kvm_psci_1_x_call() is a constant known at compile time for all callsites. Though it is benign, the additional check against the PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next time KVM raises its maximum PSCI version. Drop the check altogether and rely on sanitization when the PSCI version is set by userspace. No functional change intended. Signed-off-by:
-
Oliver Upton authored
The SMCCC does not allow the SMC64 calling convention to be used from AArch32. While KVM checks to see if the calling convention is allowed in PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to unadvertised PSCI v1.0+ functions. Hoist the check to see if the requested function is allowed into kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all PSCI versions. Fixes: d43583b8 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest") Acked-by:
Will Deacon <will@kernel.org> Reviewed-by:
-
Oliver Upton authored
The only valid calling SMC calling convention from an AArch32 state is SMC32. Disallow any PSCI function that sets the SMC64 function ID bit when called from AArch32 rather than comparing against known SMC64 PSCI functions. Note that without this change KVM advertises the SMC64 flavor of SYSTEM_RESET2 to AArch32 guests. Fixes: d43583b8 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest") Acked-by:
-
- 05 Apr, 2022 4 commits
-
-
Bagas Sanjaya authored
Add missing line break separator between literal block and description of KVM_EXIT_RISCV_SBI. This fixes: </path/to/linux>/Documentation/virt/kvm/api.rst:6118: WARNING: Literal block ends without a blank line; unexpected unindent. Fixes: da40d858 (RISC-V: KVM: Document RISC-V specific parts of KVM API, 2021-09-27) Cc: Anup Patel <anup.patel@wdc.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20220403065735.23859-1-bagasdotme@gmail.com> Signed-off-by:
-
Lv Ruyi authored
All work currently pending will be done first by calling destroy_workqueue, so there is unnecessary to flush it explicitly. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by:
-
Sean Christopherson authored
Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as -1 is technically undefined behavior when its value is read out by param_get_bool(), as boolean values are supposed to be '0' or '1'. Alternatively, KVM could define a custom getter for the param, but the auto value doesn't depend on the vendor module in any way, and printing "auto" would be unnecessarily unfriendly to the user. In addition to fixing the undefined behavior, resolving the auto value also fixes the scenario where the auto value resolves to N and no vendor module is loaded. Previously, -1 would result in Y being printed even though KVM would ultimately disable the mitigation. Rename the existing MMU module init/exit helpers to clarify that they're invoked with respect to the vendor module, and add comments to document why KVM has two separate "module init" flows. ========================================================================= UBSAN: invalid-load in kernel/params.c:320:33 load of value 255 is not a valid value for type '_Bool' CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 param_get_bool.cold+0xf/0x14 param_attr_show+0x55/0x80 module_attr_show+0x1c/0x30 sysfs_kf_seq_show+0x93/0xc0 seq_read_iter+0x11c/0x450 new_sync_read+0x11b/0x1a0 vfs_read+0xf0/0x190 ksys_read+0x5f/0xe0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ========================================================================= Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: stable@vger.kernel.org Reported-by:
Bruno Goncalves <bgoncalv@redhat.com> Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
Peter Gonda authored
Add resched to avoid warning from sev_clflush_pages() with large number of pages. Signed-off-by:
Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <20220330164306.2376085-1-pgonda@google.com> Signed-off-by:
-
- 03 Apr, 2022 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
