Merge tag 'juno-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/late

Merge "ARMv8 Juno DT fix for v4.11" from Sudeep Holla:

Just single patch to fix replicator in order to prevent overflows at
the source and reduce the back pressure by splitting the trace output
to TPIU and ETR.

* tag 'juno-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: update definition for programmable replicator

The moxart defconfig wasn't even building a kernel for Moxart,
it was building a kernel for V4T on the nothing platform. Switch
to MULTI_V4 and keep the right drivers, update a few selections.
Now it (presumably) builds a minimalist Moxart kernel again.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The pen hold/release scheme was copied over to Ux500 from the ARM
reference designs like most of these at the time. It is not needed
at all, and was mostly removed in commit c00def71
"ARM: ux500: simplify secondary CPU boot".

However on the suspend/resume path and hot plug/unplug of CPUs,
the .cpu_die() callback was still waiting for the pen to be
released which made it spin forever and the second core never come
back online after suspend/resume.

Fix this by simply replacing the strange custom .cpu_die() with
a oneline wfi() just like e.g. the qcom platform does. This fixes
the issue and makes the second core come up properly after
suspend/resume.

As a side effect, this rids us of the completely surplus local
setup.h and hotplug.c files, and we just compile this into platsmp.c
with everything else SMP.

Cc: stable@vger.kernel.org
Fixes: c00def71 ("ARM: ux500: simplify secondary CPU boot")
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs.

  A handful of driver changes this time around. The larger changes are:

   - Reset drivers for hi3660 and zx2967

   - AHCI driver for Davinci, acked by Tejun and brought in here due to
     platform dependencies

   - Cleanups of atmel-ebi (External Bus Interface)

   - Tweaks for Rockchip GRF (General Register File) usage (kitchensink
     misc register range on the SoCs)

   - PM domains changes for support of two new ZTE SoCs (zx296718 and
     zx2967)"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  soc: samsung: pmu: Add register defines for pad retention control
  reset: make zx2967 explicitly non-modular
  reset: core: fix reset_control_put
  soc: samsung: pm_domains: Read domain name from the new label property
  soc: samsung: pm_domains: Remove message about failed memory allocation
  soc: samsung: pm_domains: Remove unused name field
  soc: samsung: pm_domains: Use full names in subdomains registration log
  sata: ahci-da850: un-hardcode the MPY bits
  sata: ahci-da850: add a workaround for controller instability
  sata: ahci: export ahci_do_hardreset() locally
  sata: ahci-da850: implement a workaround for the softreset quirk
  sata: ahci-da850: add device tree match table
  sata: ahci-da850: get the sata clock using a connection id
  soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
  memory: atmel-ebi: Enable the SMC clock if specified
  soc: samsung: pmu: Remove unused and duplicated defines
  memory: atmel-ebi: Properly handle multiple reference to the same CS
  memory: atmel-ebi: Fix the test to enable generic SMC logic
  soc: samsung: pm_domains: Add new Exynos5433 compatible
  soc: samsung: pmu: Add dummy support for Exynos5433 SoC
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "ARM64 DT updates are fairly small this time, only two new SoCs and a
  handful of new machines get added, all of them similar to other
  hardware we already support.

  New SoC:

   - HiSilicon Kirin960/Hi3660 and HiKey960 development board

   - NXP LS1012a with three reference boards:
        http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A

  New development board:

   - Banana Pi M64, based on Allwinner A64:
        http://www.banana-pi.org/m64.html

   - SolidRun MACCHIATOBin based on Marvell Armada 8K:
        https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/

   - Broadcom BCM958712DxXMC NorthStar2 reference board (another one)

  A lot of platforms improve support for existing machines by adding
  extra devices for which a binding and driver is availabe:

  Allwinner:
   - MMC, USB

  ARM Juno:
   - Coresight, STM

  Broadcom:
   - NS2 GICv2m irqchip and PCIe

  Marvell:
   - Armada 3700 SPI, I2C, ethernet switch

  Mediatek:
   - MT8173 thermal

  NXP i.MX:
   - LS1046A thermal

  Qualcomm:
   - coresight on MSM8916, HDMI, WCNSS, SCM

  Renesas:
   - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd

  Rockchip:
   - thermal, eDP, pinctrl enhancements

  Samsung:
   - TM2 touchkey, Exynos5433 HDMI and power management improvements

  UniPhier:
   - SD reset, eMMC controller

  ZTE:
   - oppv2 cpufreq"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits)
  arm64: dts: qcom: Add msm8916 CoreSight components
  arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
  arm64: allwinner: add BananaPi-M64 support
  arm64: allwinner: a64: add UART1 pin nodes
  arm64: allwinner: pine64: add MMC support
  arm64: allwinner: a64: Increase the MMC max frequency
  arm64: allwinner: a64: Add MMC pinctrl nodes
  arm64: allwinner: a64: Add MMC nodes
  dt-bindings: clockgen: Add compatible string for LS1012A
  Documentation: DT: add LS1012A compatible for SCFG and DCFG
  Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
  arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
  arm64: tegra: Use symbolic reset identifiers
  arm64: dts: r8a7796: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: tidyup audma definition order
  arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7796: Add R-Car Gen3 thermal support
  arm64: dts: r8a7795: Add R-Car Gen3 thermal support
  ...

Pull ARM DT updates from Arnd Bergmann:
 "A total of 380 patches this time, mostly adding support for more
  hardware in the device tree descriptions. There is not much exciting
  here for 4.11, but I've tried my best to condense the information from
  the pull requests I got into a readable summary.

  Noteworthy changes to existing platforms include:

   - The GIC memory map was a bit wrong almost everywhere and now gets
     fixed up

   - The Allwinner platforms convert to the generic pinmux properties

   - The Marvell EBU platforms now use the new DSA binding

   - Samsung Exynos4212 was unused and gets removed

   - The Renesas power management got improved

  New production machines:

   - Lego Mindstorms EV3:
        https://www.lego.com/en-us/mindstorms/about-ev3

   - Beelink X2 Android media box:
        http://linux-sunxi.org/Beelink_X2

   - "Romulus" baseboard management controller for OpenPower

   - Axentia TSE-850 Data Radio Channel (DARC) encoder:
        http://www.axentia.se/db/equipment.html

   - Luxul XAP-1410 and XWR-1200 wireless access points:
        https://luxul.com/xap-1410

  New SoCs:

   - Allwinner H2+ and V3s, both minor variations of already supported
     chips:
        http://www.allwinnertech.com/index.php?c=product&a=index&id=38

   - Marvell Prestera DX packet processors based on Armada XP
     architecture:
        http://www.marvell.com/switching/prestera-dx/

   - Samsung Exynos4412 Prime gets added, a minor variation of
     Exynos4412

  New developer and reference boards:

   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on
     Allwinner SoCs:
        http://linux-sunxi.org/LicheePi_One
        http://www.orangepi.org/orangepizero/

   - SAMA5d36ek Reference platform:
        http://www.atmel.com/tools/sama5d36-ek.aspx

   - Beaglebone Green Wireless and Black Wireless:
        https://beagleboard.org/black-wireless
        https://beagleboard.org/green-wireless

   - phyCORE-AM335x System on Module:
        http://phytec.com/products/system-on-modules/phycore/am335x/

   - New revision of "vf610-zii" Zodiac Inflight Innovations board

   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam
     i.Core:
        http://www.opossom.com/english/index.html
        http://www.savageboard.org/
        http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
        http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is

   - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas,
     qcom, rockchip, sti, stm32 and tegra

  New device supports added to some boards and SoCs, briefly by platform:

   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU

   - Aspeed: network, ipmi bt, gpio, pinmux

   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc

   - TI DaVinci: gpio, lcdc, usb, video-in, uart

   - TI Keystone 2: MSM RAM, power/reset, uart

   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal

   - Marvell EBU: ethernet switch on Turris Omnia

   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom,
     mmc, nand

   - TI OMAP:

   - Qualcomm: coresight, gyro/accelerometer, hdmi

   - Renesas: pmic, soc-id

   - Rockchip: qos

   - Samsung: audio on Odroid-X

   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor

   - STi: video in/out

   - STM32: timer, pwm, i2c, rtc, add, i2s

   - NVIDIA Tegra: tpm

   - Uniphier: mmc/sd pinmux"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits)
  ARM: dts: armada-385-linksys: fix DSA compatible property
  ARM: dts: Fix typo in armada-xp-98dx4251
  ARM: DTS: Fix register map for virt-capable GIC
  dt-bindings: arm,gic: Fix binding example for a virt-capable GIC
  ARM: dts: sun8i: sinlinx: Enable audio nodes
  ARM: dts: sun8i: parrot: Enable audio nodes
  ARM: dts: sun8i: Add audio codec, dai and card for A33
  ARM: dts: Add EMAC AXI settings for Arria10
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: sun8i: dt: Add mali node
  dt-bindings: gpu: Add Mali Utgard bindings
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
  ARM: dts: add the AB8500 sysclk to the device trees
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "Defconfig additions, removals, etc. Almost all of them just turn on
  drivers that we want on some platform, usually after the driver has
  been merged into mainline.

  There is now a new defconfig file for tango4"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: multi_v7_defconfig: enable pstore configs
  ARM: multi_v7_defconfig: enable some newly added crypto modules
  ARM: davinci_all_defconfig: enable SATA modules
  arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
  arm64: defconfig: enable CONFIG_MTD_BLOCK
  ARM: Import tango4_defconfig
  ARM: omap2plus_defconfig: Enable support for RTC M41T80
  ARM: omap2plus_defconfig: Enable support for micrell phys
  ARM: vf610m4: defconfig: enable EXT4 filesystem
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  arm64: defconfig: Enable NUMA and NUMA_BALANCING
  arm64: defconfig: enable SMMUv3 config
  ARM: davinci_all_defconfig: enable iio
  ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
  ARM: configs: stm32: Add RTC support in STM32 defconfig
  ARM: defconfig: qcom: add APQ8060 DragonBoard devices
  ARM: qcom_defconfig: enable thermal sensors
  ARM: qcom_defconfig: add ahci configs
  ARM: qcom_defconfig: add pcie and atl1c ethernet configs
  ARM: qcom_defconfig: add usb related configs
  ...

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms, only trivial stuff
  this time, a few defconfig changes to enable drivers, and a new entry
  for the Cavium ThunderX2 platform"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add Cavium ThunderX2 entry
  arm64: add ARCH_THUNDER2 to defconfig
  arm64: add THUNDER2 processor family
  MAINTAINERS: Extend ARM/Mediatek SoC support section
  arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE
  arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "We sometimes collect non-critical fixes that come in during the later
  part of the merge window in a branch for the next release instead, and
  this is that contents for v4.11.

  Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
  and setup. There's also some fixes for Davinci and a Kconfig fix for
  SCPI to only enable on ARM{,64}"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  firmware: arm_scpi: Add hardware dependencies
  ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  ARM: dts: Fix compatible for ti81xx uarts for 8250
  ARM: dts: Fix am335x and dm814x scm syscon to probe children
  ARM: OMAP2+: Fix init for multiple quirks for the same SoC
  ARM: dts: Fix omap3 off mode pull defines
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix

Pull PCI updates from Bjorn Helgaas:

 - add ASPM L1 substate support

 - enable PCIe Extended Tags when supported

 - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx

 - increase VPD access timeout

 - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432

 - use new pci_irq_alloc_vectors() in more drivers

 - fix MSI affinity memory leak

 - remove unused MSI interfaces and update documentation

 - remove unused AER .link_reset() callback

 - avoid pci_lock / p->pi_lock deadlock seen with perf

 - serialize sysfs enable/disable num_vfs operations

 - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and
   refactor so we can support both hosts and endpoints

 - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers

 - add Rockchip system power management support

 - add Thunder-X cn81xx and cn83xx support

 - add Exynos 5440 PCIe PHY support

* tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits)
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  ...

Pull networking fixes from David Miller:

 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal.

 2) Fix scheduling while atomic in l2tp network namespace exit by
    deferring the work to the workqueue. From Ridge Kennedy.

 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin.

 4) mlx5e CQE compression engine not initialized properly, from Tariq
    Toukan.

 5) Some UAPI header fixes from Dmitry V. Levin.

 6) Don't overwrite module parameter value in mlx4 driver, from Majd
    Dibbiny.

 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban
    Browaeys.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  bpf: Fix bpf_xdp_event_output
  net/mlx4_en: Use __skb_fill_page_desc()
  net/mlx4_core: Use cq quota in SRIOV when creating completion EQs
  net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
  net/mlx4: Spoofcheck and zero MAC can't coexist
  net/mlx4: Change ENOTSUPP to EOPNOTSUPP
  uapi: fix linux/rds.h userspace compilation errors
  uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors
  lib: Remove string from parman config selection
  forcedeth: Remove return from a void function
  bpf: fix spelling mistake: "proccessed" -> "processed"
  uapi: fix linux/llc.h userspace compilation error
  uapi: fix linux/ip6_tunnel.h userspace compilation errors
  net/mlx5e: Fix wrong CQE decompression
  net/mlx5e: Update MPWQE stride size when modifying CQE compress state
  net/mlx5e: Fix broken CQE compression initialization
  net/mlx5e: Do not reduce LRO WQE size when not using build_skb
  net/mlx5e: Register/unregister vport representors on interface attach/detach
  net/mlx5e: s390 system compilation fix
  tcp: account for ts offset only if tsecr not zero
  ...

Pull Mellanox rdma updates from Doug Ledford:
 "Mellanox specific updates for 4.11 merge window

  Because the Mellanox code required being based on a net-next tree, I
  keept it separate from the remainder of the RDMA stack submission that
  is based on 4.10-rc3.

  This branch contains:

   - Various mlx4 and mlx5 fixes and minor changes

   - Support for adding a tag match rule to flow specs

   - Support for cvlan offload operation for raw ethernet QPs

   - A change to the core IB code to recognize raw eth capabilities and
     enumerate them (touches non-Mellanox code)

   - Implicit On-Demand Paging memory registration support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits)
  IB/mlx5: Fix configuration of port capabilities
  IB/mlx4: Take source GID by index from HW GID table
  IB/mlx5: Fix blue flame buffer size calculation
  IB/mlx4: Remove unused variable from function declaration
  IB: Query ports via the core instead of direct into the driver
  IB: Add protocol for USNIC
  IB/mlx4: Support raw packet protocol
  IB/mlx5: Support raw packet protocol
  IB/core: Add raw packet protocol
  IB/mlx5: Add implicit MR support
  IB/mlx5: Expose MR cache for mlx5_ib
  IB/mlx5: Add null_mkey access
  IB/umem: Indicate that process is being terminated
  IB/umem: Update on demand page (ODP) support
  IB/core: Add implicit MR flag
  IB/mlx5: Support creation of a WQ with scatter FCS offload
  IB/mlx5: Enable QP creation with cvlan offload
  IB/mlx5: Enable WQ creation and modification with cvlan offload
  IB/mlx5: Expose vlan offloads capabilities
  IB/uverbs: Enable QP creation with cvlan offload
  ...

Pull VFIO updates from Alex Williamson:

 - Kconfig fixes for SPAPR_TCE_IOMMU=n (Michael Ellerman)

 - Module softdep rather than request_module to simplify usage from
   initrd (Alex Williamson)

 - Comment typo fix (Changbin Du)

* tag 'vfio-v4.11-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: fix a typo in comment of function vfio_pin_pages
  vfio: Replace module request with softdep
  vfio/mdev: Use a module softdep for vfio_mdev
  vfio: Fix build break when SPAPR_TCE_IOMMU=n

Fix a typo. xdp->data instead of xdp should be copied to the perf-event's
dst_buff.

Fixes: 4de16969 ("bpf: enable event output helper also for xdp types")
Reported-by: Huapeng Zhou <hzhou@fb.com>
Tested-by: Feixiong Zhang <feixiong@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull crypto update from Herbert Xu:
 "API:
   - Try to catch hash output overrun in testmgr
   - Introduce walksize attribute for batched walking
   - Make crypto_xor() and crypto_inc() alignment agnostic

  Algorithms:
   - Add time-invariant AES algorithm
   - Add standalone CBCMAC algorithm

  Drivers:
   - Add NEON acclerated chacha20 on ARM/ARM64
   - Expose AES-CTR as synchronous skcipher on ARM64
   - Add scalar AES implementation on ARM64
   - Improve scalar AES implementation on ARM
   - Improve NEON AES implementation on ARM/ARM64
   - Merge CRC32 and PMULL instruction based drivers on ARM64
   - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64
   - Add IPsec AUTHENC implementation in atmel
   - Add Support for Octeon-tx CPT Engine
   - Add Broadcom SPU driver
   - Add MediaTek driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
  crypto: xts - Add ECB dependency
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - remove dead MSI-X related define
  crypto: brcm - Avoid double free in ahash_finup()
  crypto: cavium - fix Kconfig dependencies
  crypto: cavium - cpt_bind_vq_to_grp could return an error code
  crypto: doc - fix typo
  hwrng: omap - update Kconfig help description
  crypto: ccm - drop unnecessary minimum 32-bit alignment
  crypto: ccm - honour alignmask of subordinate MAC cipher
  crypto: caam - fix state buffer DMA (un)mapping
  crypto: caam - abstract ahash request double buffering
  crypto: caam - fix error path for ctx_dma mapping failure
  crypto: caam - fix DMA API leaks for multiple setkey() calls
  crypto: caam - don't dma_map key for hash algorithms
  crypto: caam - use dma_map_sg() return code
  crypto: caam - replace sg_count() with sg_nents_for_len()
  crypto: caam - check sg_count() return value
  crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc()
  ..

Pull rpmsg updates from Bjorn Andersson:
 "This introduces an interface for user space to directly communicate on
  rpmsg endpoints without the implementation of specific kernel drivers,
  which is useful for e.g. debug channels:

* tag 'rpmsg-v4.11' of git://github.com/andersson/remoteproc:
  rpmsg: rpmsg_create_ept() returns NULL on error
  rpmsg: qcom: smd: Return positively when not enabled
  rpmsg: unlock on error in rpmsg_eptdev_read()
  rpmsg: char: add CONFIG_NET dependency
  rpmsg: smd: Register rpmsg user space interface for edges
  rpmsg: Driver for user space endpoint interface
  rpmsg: qcom_smd: Implement endpoint "poll"
  rpmsg: Introduce "poll" to endpoint ops
  rpmsg: qcom_smd: Add support for "label" property

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for booting the dedicated sensor core in the
  Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
  utilize SMD subdevice helpers for properly handle shutdowns and
  restarts of the remoteproc, add virtio support to the ST remoteproc
  and refactor the Qualcomm Hexagon driver to handle variations between
  platforms.

  The support code for parsing, loading and authenticating Qualcomm
  firmware files (MDT) is refactored and move to drivers/soc/qcom, to
  allow for non-remoteproc drivers to utilize this.

  Finally it brings some cleanups to the remoteproc core"

* tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits)
  remoteproc: qcom: mdt_loader: Use signed type for offset
  remoteproc: st: add virtio communication support
  remoteproc: st: correct probe error management
  remoteproc: Modify the function names
  remoteproc: Reduce asynchronous request_firmware to auto-boot only
  remoteproc: Drop qcom_scm_pas_supported() from adsp_probe()
  MAINTAINERS: Add missing rpmsg include path
  remoteproc: qcom: Use common SMD edge handler
  remoteproc: qcom: wcnss: Make SMD handling common
  remoteproc: Move qcom_mdt_loader into drivers/soc/qcom
  remoteproc: qcom: mdt_loader: Refactor MDT loader
  remoteproc: qcom: mdt_loader: Don't overwrite firmware object
  remoteproc: qcom: Extract non-mdt related helper
  remoteproc: qcom: q6v5: Decouple driver from MDT loader
  remoteproc: qcom: q6v5: Remove mss supply from 8916
  remoteproc: qcom: fix initializers for qcom_mss_reg_res array
  remoteproc: Drop firmware_loading_complete
  remoteproc: Add RPROC_DELETED state
  remoteproc: Move rproc_delete_debug_dir() to rproc_del()
  remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.
  ...

Pull GFS2 fix from Bob Peterson:
 "This is an addendum for the 4.11 merge window.

  Andy Price wrote this patch to close a nasty race condition that
  allows access to glocks that are being destroyed. Without this patch,
  GFS2 is vulnerable to random corruption and kernel panic"

* tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Add missing rcu locking for glock	lookup

Pull sound updates from Takashi Iwai:
 "Here is the update of sound bits for 4.11: again at this time, no big
  changes in ALSA and ASoC core but only cosmetic changes like
  consitifaction.

  Meanwhile, quite a lot of developments are seen in a few driver side.

  ALSA Core:
   - Clean up, consitification of some ops

  HD-audio:
   - A slight behavior change of single_cmd option
   - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
     HP, and fixes for Lewisburg controller
   - Realtek ALC299, ALC1220 codecs

  Others:
   - USB-audio: Tascam US-16x08 DSP mixer quirk
   - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
     contains some updates in drm/i915 for the new platform binding

  ASoC:
   - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
     on Skylake and onwards, as well as more Baytrail / Cherrytrail
     boards support
   - Channel mapping support for HDMI
   - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
     Nuvoton NAU8540.

* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
  ALSA: usb-audio: Tidy up mixer_us16x08.c
  ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
  ALSA: usb-audio: purge needless variable length array
  ALSA: x86: hdmi: select CONFIG_SND_PCM
  ALSA: x86: Don't enable runtime PM as default
  ALSA: x86: Use runtime PM autosuspend
  ALSA: usb-audio: localize function without external linkage
  ALSA: usb-audio: localize one-referrer variable
  ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
  ALSA: emu10k1: constify snd_emux_operators structure
  ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
  ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
  ASoC: nau8825: automatic BCLK and LRC divde in master mode
  ASoC: hdac_hdmi: Add device id for Geminilake
  ASoC: Intel: Skylake: Add Geminlake IDs
  ASoC: rt298: Add DMI match for Geminilake reference platform
  ASoC: Intel: Skylake: Check device type to get endpoint configuration
  ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...

Pull input updates from Dmitry:

 - a new driver for Zeitech touchscreen controller

 - a new driver for Samsung "touchkeys"

 - touchscreen driver for Moorestown platform has been removed because
   platform support is gone

 - MPU3050 accelerometer driver was removed in favor of IIO driver

 - miscellaneous driver cleanup and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits)
  Input: zet6223 - export OF device ID as module aliases
  Input: tsc2004/5 - switch to using generic device properties
  Input: tsc2004/5 - fix regulator handling
  Input: tsc2005 - add OF device table
  Input: add driver for Zeitec ZET6223
  Input: joydev - do not report stale values on first open
  Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
  Input: synaptics-rmi4 - clean up F30 implementation
  Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
  Input: psmouse - add a custom serio protocol to send extra information
  Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
  Input: xpad - restore LED state after device resume
  Input: synaptics-rmi4 - add rmi_find_function()
  Input: xpad - fix stuck mode button on Xbox One S pad
  Input: joydev - use clamp() macro
  Input: refuse to register absolute devices without absinfo
  Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
  Input: synaptics-rmi4 - add sysfs attribute update_fw_status
  Input: mousedev - stop offering PS/2 to userspace by default
  Input: tca8418 - switch to using generic device properties
  ...

Pull rdma updates from Doug Ledford:
 "First set of updates for 4.11 kernel merge window

   - Add new Broadcom bnxt_re RoCE driver
   - rxe driver updates
   - ioctl cleanups
   - ETH_P_IBOE declaration cleanup
   - IPoIB changes
   - Add port state cache
   - Allow srpt driver to accept guids as port names in config
   - Update to hfi1 driver
   - Update to srp driver
   - Lots of misc minor changes all over"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits)
  RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0."
  rdma_cm: fail iwarp accepts w/o connection params
  IB/srp: Drain the send queue before destroying a QP
  IB/core: Add support for draining IB_POLL_DIRECT completion queues
  IB/srp: Improve an error path
  IB/srp: Make a diagnostic message more informative
  IB/srp: Document locking conventions
  IB/srp: Fix race conditions related to task management
  IB/srp: Avoid that duplicate responses trigger a kernel bug
  IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS
  RDMA/qedr: Fix some error handling
  RDMA/bnxt_re: add DCB dependency
  IB/hns: include linux/module.h
  IB/vmw_pvrdma: Expose vendor error to ULPs
  vmw_pvrdma: switch to pci_alloc_irq_vectors
  IB/hfi1: use size_t for passing array length
  IB/ipoib: Remove redudant label
  IB/ipoib: remove the unnecessary memory free
  IB/mthca: switch to pci_alloc_irq_vectors
  IB/hfi1: Code reuse with memdup_copy
  ...

Pull backlight updates from Lee Jones:
 "Core Frameworks:
   - Add Daniel Thompson as co-maintainer

  Fix-ups:
   - Improve error handling; adp5520_bl
   - Split initial power checks into dedicated function; pwm_bl
   - Check current PWM status; pwm_bl

  Bug Fixes:
   - Fix potential race; lcd
   - Fix module auto-loading; da9052"

* tag 'backlight-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  MAINTAINERS: Rework entry for Backlight
  backlight: da9052: Fix module autoload
  backlight: pwm_bl: Check the PWM state for initial backlight power state
  backlight: pwm_bl: Move the checks for initial power state to a separate function
  backlight: adp5520: Fix error handling in adp5520_bl_probe()
  backlight: lcd: Fix race condition during register

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC
   - List include/dt-bindings/mfd/* to files supported in MAINTAINERS

  New Drivers:
   - Intel Apollo Lake SPI NOR
   - ST STM32 Timers (Advanced, Basic and PWM)
   - Motorola 6556002 CPCAP (PMIC)

  New Device Support:
   - Add support for AXP221 to axp20x
   - Add support for Intel Gemini Lake to intel-lpss-pci
   - Add support for MT6323 LED to mt6397-core
   - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6, COMe-cAL6 and
     COMe-cKL6 to kempld-core

  New Functionality:
   - Add support for Analog CODAC to sun6i-prcm
   - Add support for Watchdog to lpc_ich

  Fix-ups:
   - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl
   - Adapt platform data handling; axp20x
   - IRQ handling improvements; arizona, axp20x
   - Remove superfluous code; arizona, axp20x, lpc_ich
   - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt
   - Regmap fix-ups; axp20x
   - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912,
     mt6397
   - Use new I2C probing mechanism; max77686
   - Constification; rk808

  Bug Fixes:
   - Stop data transfer whilst suspended; cros_ec"

* tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (43 commits)
  mfd: lpc_ich: Enable watchdog on Intel Apollo Lake PCH
  mfd: lpc_ich: Remove useless comments in core part
  mfd: Add support for several boards to Kontron PLD driver
  mfd: constify regmap_irq_chip structures
  MAINTAINERS: Add include/dt-bindings/mfd to MFD entry
  mfd: cpcap: Add minimal support
  mfd: mt6397: Add MT6323 LED support into MT6397 driver
  Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
  mfd: tps65912: Export OF device ID table as module aliases
  mfd: ab8500-core: Rename clock device and compatible
  mfd: cros_ec: Send correct suspend/resume event to EC
  mfd: max77686: Remove I2C device ID table
  mfd: max77686: Use the struct i2c_driver .probe_new instead of .probe
  mfd: max77686: Use of_device_get_match_data() helper
  mfd: max77686: Don't attempt to get i2c_device_id .data
  mfd: ab8500-sysctrl: Handle probe deferral
  mfd: intel-lpss: Add Intel Gemini Lake PCI IDs
  mfd: axp20x: Fix AXP806 access errors on cold boot
  mfd: cros_ec: Send suspend state notification to EC
  mfd: cros_ec: Prevent data transfer while device is suspended
  ...

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Revisit warning logic when not applying default helper assignment.
   Jiri Kosina considers we are breaking existing setups and not warning
   our users accordinly now that automatic helper assignment has been
   turned off by default. So let's make him happy by spotting the warning
   by when we find a helper but we cannot attach, instead of warning on the
   former deprecated behaviour. Patch from Jiri Kosina.

2) Two patches to fix regression in ctnetlink interfaces with
   nfnetlink_queue. Specifically, perform more relaxed in CTA_STATUS
   and do not bail out if CTA_HELP indicates the same helper that we
   already have. Patches from Kevin Cernekee.

3) A couple of bugfixes for ipset via Jozsef Kadlecsik. Due to wrong
   index logic in hash set types and null pointer exception in the
   list:set type.

4) hashlimit bails out with correct userspace parameters due to wrong
   arithmetics in the code that avoids "divide by zero" when
   transforming the userspace timing in milliseconds to token credits.
   Patch from Alban Browaeys.

5) Fix incorrect NFQA_VLAN_MAX definition, patch from
   Ken-ichirou MATSUZAWA.

6) Don't not declare nfnetlink batch error list as static, since this
   may be used by several subsystems at the same time. Patch from
   Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from Eric Dumazet and our team
to the mlx4 Core and Eth drivers.

Series generated against net commit:
eee2faab tcp: account for ts offset only if tsecr not zero

v3:
* Rebased, conflict solved.

v2:
* Added Eric's fix (patch 5/5).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Or we might miss the fact that a page was allocated from memory reserves.

Fixes: dceeab0e ("mlx4: support __GFP_MEMALLOC for rx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating EQs to handle CQ completion events for the PF
or for VFs, we create enough EQE entries to handle completions
for the max number of CQs that can use that EQ.

When SRIOV is activated, the max number of CQs a VF (or the PF) can
obtain is its CQ quota (determined by the Hypervisor resource tracker).
Therefore, when creating an EQ, the number of EQE entries that the VF
should request for that EQ is the CQ quota value (and not the total
number of CQs available in the FW).

Under SRIOV, the PF, also must use its CQ quota, because
the resource tracker also controls how many CQs the PF can obtain.

Using the FW total CQs instead of the CQ quota when creating EQs resulted
wasting MTT entries, due to allocating more EQEs than were needed.

Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spoofcheck can't be enabled if VF MAC is zero.
Vice versa, can't zero MAC if spoofcheck is on.

Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As ENOTSUPP is specific to NFS, change the return error value to
EOPNOTSUPP in various places in the mlx4 driver.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Suggested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:198:2: error: unknown type name 'u8'
  u8 rx_traces;
/usr/include/linux/rds.h:199:2: error: unknown type name 'u8'
  u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX];
/usr/include/linux/rds.h:203:2: error: unknown type name 'u8'
  u8 rx_traces;
/usr/include/linux/rds.h:204:2: error: unknown type name 'u8'
  u8 rx_trace_pos[RDS_MSG_RX_DGRAM_TRACE_MAX];
/usr/include/linux/rds.h:205:2: error: unknown type name 'u64'
  u64 rx_trace[RDS_MSG_RX_DGRAM_TRACE_MAX];

Fixes: 3289025a ("RDS: add receive message trace used by application")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/in6.h> in uapi/linux/seg6.h to fix the following
linux/seg6.h userspace compilation error:

/usr/include/linux/seg6.h:31:18: error: array type has incomplete element type 'struct in6_addr'
  struct in6_addr segments[0];

Include <linux/seg6.h> in uapi/linux/seg6_iptunnel.h to fix
the following linux/seg6_iptunnel.h userspace compilation error:

/usr/include/linux/seg6_iptunnel.h:26:21: error: array type has incomplete element type 'struct ipv6_sr_hdr'
  struct ipv6_sr_hdr srh[0];

Fixes: a50a05f4 ("ipv6: sr: add missing Kbuild export for header files")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported by Geert, remove the string so the user does not see this
config option. The option is explicitly selected only as a dependency of
in-kernel users.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 44091d29 ("lib: Introduce priority array area manager")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a void function, it is not necessary to append a return statement in it.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in verbose log message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/if.h> to fix the following linux/llc.h userspace
compilation error:

/usr/include/linux/llc.h:26:27: error: 'IFHWADDRLEN' undeclared here (not in a function)
  unsigned char   sllc_mac[IFHWADDRLEN];
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include <linux/if.h> and <linux/in6.h> to fix the following
linux/ip6_tunnel.h userspace compilation errors:

/usr/include/linux/ip6_tunnel.h:23:12: error: 'IFNAMSIZ' undeclared here (not in a function)
  char name[IFNAMSIZ]; /* name of tunnel device */
/usr/include/linux/ip6_tunnel.h:30:18: error: field 'laddr' has incomplete type
  struct in6_addr laddr; /* local tunnel end-point address */
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>