- 10 Sep, 2014 3 commits
-
-
Matteo Croce authored
ATH10K_DEBUGFS must depend on DEBUG_FS, otherwise ath10k will generate an invalid pointer on module load. Signed-off-by:
Matteo Croce <matteo@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
On 32bit systems the bitmap was too small and it was overwritten partially by the stat completion structure. This was visible with 10.2 firmware only due to it using a few of the last service ids. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Michal Kazior authored
The fw_crash_data was allocated too late. Upon early firmware crash, before registering to mac80211, it was possible to crash the whole system: ath10k_pci 0000:00:05.0: device has crashed during init BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] PGD 0 Oops: 0002 [#1] SMP Modules linked in: ath10k_pci(O) ath10k_core(O) ath [last unloaded: ath] CPU: 3 PID: 29 Comm: kworker/u8:1 Tainted: G O 3.17.0-rc2-wl-ath+ #447 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] task: ffff88001eb01ad0 ti: ffff88001eb60000 task.ti: ffff88001eb60000 RIP: 0010:[<ffffffffa0058005>] [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP: 0018:ffff88001eb63ce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc90001a09030 RDI: 0000000000000001 RBP: ffff88001eb63cf0 R08: 0000000000000000 R09: ffff8800000bb200 R10: 00000000000001e2 R11: ffff88001eb638de R12: ffff88001d7459a0 R13: ffff88001d746ab0 R14: 00000000fffe14d4 R15: ffff88001d747c60 FS: 0000000000000000(0000) GS:ffff88001fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000001df34000 CR4: 00000000000006e0 Stack: ffff88001d7459a0 ffff88001eb63d58 ffffffffa0083bbe ffff880000000010 ffff88001eb63d68 ffff88001eb63d18 0000000000000002 0000000000059010 ffffffffa0086fef 00000000deadbeef ffff88001d747a28 ffff88001d7459a0 Call Trace: [<ffffffffa0083bbe>] ath10k_pci_fw_crashed_dump+0x2e/0xd0 [ath10k_pci] [<ffffffffa0085410>] __ath10k_pci_hif_power_up+0x5f0/0x700 [ath10k_pci] [<ffffffffa0085550>] ath10k_pci_hif_power_up+0x30/0xe0 [ath10k_pci] [<ffffffffa005bc7b>] ath10k_core_register_work+0x2b/0x520 [ath10k_core] [<ffffffff810689cc>] process_one_work+0x18c/0x3f0 [<ffffffff81069011>] worker_thread+0x121/0x4a0 [<ffffffff81068ef0>] ? rescuer_thread+0x2c0/0x2c0 [<ffffffff8106daf2>] kthread+0xd2/0xf0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 [<ffffffff81857cfc>] ret_from_fork+0x7c/0xb0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 Code: 8b 40 38 48 c7 80 00 01 00 00 00 00 00 00 5b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 8b 9f 90 1d 00 00 48 8d 7b 01 <c6> 03 01 e8 e3 ec 2b e1 48 8d 7b 18 e8 6a 4f 05 e1 48 89 d8 5b RIP [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP <ffff88001eb63ce8> CR2: 0000000000000000 ---[ end trace 5d0ed15b050bcc1f ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt To prevent that split debug functions and allocate fw_crash_data earlier. Signed-off-by:
-
- 02 Sep, 2014 8 commits
-
-
Michal Kazior authored
Nothing important was being overwritten so it didn't yield any bugs yet. Signed-off-by:
-
Michal Kazior authored
This makes it easier to log and debug via tracing with more than 1 ath10k device on a system. Signed-off-by:
-
Michal Kazior authored
Remove the ugly _access functions. Being explicit is a good thing. Signed-off-by:
-
Michal Kazior authored
This prevents some fw revisions from crashing in many cases when user is trying to run a promiscuous station interface (e.g. sniffing, 4addr bridge). Signed-off-by:
-
Michal Kazior authored
Fix some cases where monitor start failure left the driver in a confused state. This also makes the monitor code simpler. Signed-off-by:
-
Michal Kazior authored
Commit 5c771e74 introduced a regression. On some systems spurious interrupts could schedule a tasklet while tearing down leading to, e.g.: BUG: unable to handle kernel paging request at fe589030 IP: [<c1316fb0>] ioread32+0x30/0x40 ... Call Trace: [<fe576c1b>] ath10k_pci_tasklet+0x1b/0x60 [ath10k_pci] [<c1053fbe>] tasklet_action+0x9e/0xb0 [<c10534f1>] __do_softirq+0xf1/0x3f0 [<c1053400>] ? ftrace_raw_event_irq_handler_entry+0xa0/0xa0 [<c1004999>] do_softirq_own_stack+0x29/0x40 <IRQ> [<c1053a76>] irq_exit+0x86/0xb0 ... [<c132d522>] do_pci_disable_device+0x52/0x60 [<c132d57f>] pci_disable_device+0x4f/0xb0 [<c132a961>] ? __pci_set_master+0x51/0x80 [<fe5740b3>] ath10k_pci_release+0x33/0x40 [ath10k_pci] [<fe575d4b>] ath10k_pci_remove+0x7b/0x90 [ath10k_pci] Reported-by:
-
Michal Kazior authored
If a station was reassociated, i.e. due to change of supported rates update via sta_rc_update() the num_legacy_stations would be (incorrectly) bumped up leading to unbalanced usage of the var. This in turn could lock rtscts protection up as enabled. Signed-off-by:
-
Michal Kazior authored
Recent changes done to start/restart sequences broke hw recovery in some hw configurations. The pci transport was stopped twice however due to a workaround in the pci disabling code the disable/enable for first msi interrupt was not balanced. This ended up with irqs not being properly re-enabled and the following print out during recovery: ath10k: failed to receive control response completion, polling.. ath10k: Service connect timeout: -110 ath10k: Could not init core: -110 Legacy interrupt mode was unaffected while msi ranged mode would be partially crippled (it would miss fw indication interrupts but otherwise it worked fine). This fixes completely broken fw recovery for a single msi interrupt mode and fixes subsequent fw crash reports for msi range interrupt mode. Signed-off-by:
-
- 28 Aug, 2014 29 commits
-
-
Andreea-Cristina Bernat authored
According to RCU_INIT_POINTER()'s block comment 3.a, it can be used if "3. The referenced data structure has already been exposed to readers either at compile time or via rcu_assign_pointer() -and- a. You have not made -any- reader-visible changes to this structure since then". This case fulfills the conditions above because between the rcu_dereference() call (cvif = rcu_dereference(ar->beacon_iter);) and the rcu_assign_pointer() call there is no update of the "cvif" variable. Therefore, this patch makes the replacement. The following Coccinelle semantic patch was used: @@ identifier v; @@ v = rcu_dereference(...); ... when != rcu_dereference(...); when != v = ...; when != (<+...v...+>)++; when != \(memcpy\|memset\)(...); ( - rcu_assign_pointer + RCU_INIT_POINTER (..., v); | if(...) { ... when != v = ...; - rcu_assign_pointer + RCU_INIT_POINTER (..., v); ... when any } ) Because there are cases where between a “rcu_dereference()” call and a “rcu_assign_pointer()” call might be updates of the value that interests us, the Coccinelle semantic patch ignores them and replaces with "RCU_INIT_POINTER()" only when the update is not happening. Signed-off-by:Andreea-Cristina Bernat <bernat.ada@gmail.com> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Setup the channel context correctly. Not doing this was causing beacon loss in a P2P-GO/STA concurrent setup. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Canek Peláez Valdés authored
Signed-off-by:
Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by:
-
Sujith Manoharan authored
If a new context is being added in addition to the current one, then send the ASSIGN event to abort a running scan since the addition of a context is usually followed by VIF assignment and further operations. Signed-off-by:
-
Sujith Manoharan authored
There is no reason why managed/p2p interfaces have to be limited to one. IBSS is the only type that needs a restriction. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
This will be useful in handling addition/change of new channel contexts. Signed-off-by:
-
Sujith Manoharan authored
Move it inside a CONFIG_ATH9K_CHANNEL_CONTEXT ifdef since it is not needed otherwise. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
This was introduced in an earlier patch to handle a compilation warning, but since the channel context code has been mostly isolated, this is not required now. Signed-off-by:
-
Sujith Manoharan authored
chanctx_work and next_chan are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by:
-
Sujith Manoharan authored
Finally move the 'offchannel' instance in ath_softc inside a CONFIG_ATH9K_CHANNEL_CONTEXT cage. The offchannel usage in ath9k_calculate_iter_data() is closed off with an ifdef for now, since the state/opmode calculation is common for both the channel context mode and the normal mode. Signed-off-by:
-
Sujith Manoharan authored
ath9k_vif_iter() was earlier used as an iterator routine when calling a mac80211 utility. This is no longer the case and hence we can mention the argument type explicitly. Signed-off-by:
-
Sujith Manoharan authored
ath_chanctx_check_active() is required only when channel contexts are used. Make sure that it is not called in normal usage. Signed-off-by:
-
Sujith Manoharan authored
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by:
-
Sujith Manoharan authored
Introduce a function that handles queues in channel context mode. Signed-off-by:
-
Sujith Manoharan authored
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by:
-
Sujith Manoharan authored
These routines are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by:
-
Sujith Manoharan authored
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by:
-
Sujith Manoharan authored
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by:
-
Sujith Manoharan authored
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by:
-
Sujith Manoharan authored
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by:
-
Sujith Manoharan authored
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by:
-
