There is no space between the last word, and the punctuation mark in
English.
Suggested-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-2-jfalempe@redhat.com

Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.

The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-6-tzimmermann@suse.de

Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.

DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-5-tzimmermann@suse.de

Control the VIDRST pin from the VGA-BMC encoder's atomic_check and
remove the respective code from CRTC. Makes the VIDRST functionality
fully composable.

The VIDRST pin allows an external clock source to control the SYNC
signals of the Matrox chip. The functionality is part of the CRTC,
but depends on the presence of the clock source. This is the case for
some BMCs, so control the pin from the VGA-BMC output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-4-tzimmermann@suse.de

The VGA-BMC connector selects the VGA output if a display has been
attached to the physical connector. Otherwise it selects the BMC
output. In any case, the connector status is set to 'detected', so
that the userspace compositor displays to it.

Depending on the setting, the connector's display modes either come
from the VGA monitor's EDID or from an internal list of BMC-compatible
modes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-3-tzimmermann@suse.de

Duplicate VGA output to VGA-BMC output and update all code for Matrox
server chips. The new output represents a VGA output that has a BMC
attached to it. No functional changes so far.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-2-tzimmermann@suse.de

Building with Sparse enabled prints this warning for cpu_to_le16()
calls:

    warning: incorrect type in assignment (different base types)
        expected unsigned short [usertype]
        got restricted __le16 [usertype]

And this warning for le16_to_cpu() calls:

    warning: cast to restricted __le16

Declare the target buffer as __le16 to fix both warnings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716161725.41408-2-jose.exposito89@gmail.com

We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87jzh3lnts.wl-kuninori.morimoto.gx@renesas.com

For rockchip rk3288 and rk3399, the display driver is rockchip
and gpu driver is panfrost. Currently, in drm-ci for rockchip
rk3288 and rk3399, only the gpu driver is tested. Refactor
the existing rockchip jobs to test both display and gpu driver
and update xfails.

Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for rockchip jobs.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-7-vignesh.raman@collabora.com

For Amlogic Meson G12B (A311D) SOC the display driver is meson and
gpu driver is panfrost. Currently, in drm-ci for Meson G12B (A311D),
only the gpu driver is tested. Refactor the existing meson jobs
and add support in drm-ci to test both display and gpu driver for
Amlogic Meson G12B (A311D) and update xfails.

Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for meson jobs.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-6-vignesh.raman@collabora.com

For mediatek mt8173, the display driver is mediatek, while the
gpu driver is powervr. Currently, in drm-ci for mt8173, only the
display driver is tested. Add support in drm-ci to test powervr
driver for mt8173. Powervr driver was merged in linux kernel,
but there's no mediatek support yet. So disable the powervr:mt8173
job which uses powervr driver.

Also update the MAINTAINERS file to include xfails for powervr driver.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-5-vignesh.raman@collabora.com

For mediatek mt8183, the display driver is mediatek, while the
gpu driver is panfrost. Currently, in drm-ci for mt8183, only
the gpu driver is tested. Refactor the existing mediatek jobs
and add support in drm-ci to test both display and gpu driver
for mt8183 and update xfails.

Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for mediatek jobs.

Update the MAINTAINERS file to include xfails for panfrost driver.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-4-vignesh.raman@collabora.com

tools_test is a wrapper for running tools/intel_reg
and tools/intel_l3_parity. So skip these tests on
non-intel platforms and update expectaion files.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-3-vignesh.raman@collabora.com

Enable CONFIG_DRM_ANALOGIX_ANX7625 in the arm64 defconfig to get
display driver probed on the mt8183-kukui-jacuzzi-juniper machine.

arch/arm64/configs/defconfig has CONFIG_DRM_ANALOGIX_ANX7625=m,
but drm-ci don't have initrd with modules, so add
CONFIG_DRM_ANALOGIX_ANX7625=y in CI arm64 config.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-2-vignesh.raman@collabora.com

Having no in-kernel devices that use !DRM_BRIDGE_ATTACH_NO_CONNECTOR
mode for the Lontium LT9611UXC bridge, drop the in-bridge implementation
of the drm_connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701-lt9611uxc-next-bridge-v1-2-665bce5fdaaa@linaro.org

If there is a next bridge in the OF graph don't let it be ignored.
Attach the next bridge to the chain.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701-lt9611uxc-next-bridge-v1-1-665bce5fdaaa@linaro.org

Document that the drm_connector_funcs.destroy hook must be NULL in
drmm_connector_init() and drmm_connector_hdmi_init().
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804170551.33971-2-jose.exposito89@gmail.com

Rename HKC MB116AN01 from Unknown to MB116AN01
Signed-off-by: Terry Hsiao <terry_hsiao@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802070602.154201-1-terry_hsiao@compal.corp-partner.google.com

This reverts commit 9d8c094d.

It was merged without meeting userspace requirements.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802145946.48073-2-hamza.mahfooz@amd.com

This reverts commit 76299a55.

It was merged without meeting userspace requirements.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802145946.48073-1-hamza.mahfooz@amd.com

Enable the transmission of an EoTp (end of transmission packet) by
default. EoTp should be enabled anyway because it is a Linux necessity
that can be disabled by a dsi mod_flag if needed.

EoTp signals the end of an HS transmission, this adds overall robustness
at protocol level at the expense of an increased overhead.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6a7293bd06942131161c5a7b7878c51cfbbb807e.camel@googlemail.com

Instead of a TTM reference grab a GEM reference whenever necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723121750.2086-3-christian.koenig@amd.com

Fix support for VBLANK interrupts on G200ER, G200EV and G200SE, which
use a slightly different implementation than the others. The original
commits forgot to update the custom helpers when adding interrupt
handling for VBLANK events.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 89c6ea20 ("drm/mgag200: Add vblank support")
Fixes: d5070c9b ("drm/mgag200: Implement struct drm_crtc_funcs.get_vblank_timestamp")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731071004.519566-1-tzimmermann@suse.de

Describe newly added parameter target_rr_divider in struct
drm_dp_as_sdp.

-v2:
Remove extra line from commit message.(Lucas)

-v3:
Rebase.

Fixes: a20c6d95 ("drm/dp: Add refresh rate divider to struct representing AS SDP")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715162514.2836421-1-mitulkumar.ajitkumar.golani@intel.com

Simplify ast_astdp_read_edid(). Rename register constants. Drop
unnecessary error handling. On success, the helper returns 0; an
error code otherwise.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-6-tzimmermann@suse.de

The place for link training is in the encoder's atomic_enable
helper. Remove all related tests from other helper ASTDP functions;
especially ast_astdp_is_connected(), which tests HPD status.

DP link training is controlled by the firmware. A status flag reports
success or failure. The process can be fragile on Aspeed hardware. Moving
the test from connector detection to the atomic_enable allows for several
retries and a longer timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-5-tzimmermann@suse.de

The overall control flow of the driver ensures that it never reads
EDID or sets display state on unconnected outputs. Therefore remove
all tests for Hot Plug Detection from these helpers. Also rename
the register constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-4-tzimmermann@suse.de

Test for running ASTDP firmware during probe. Do not bother testing
this later. We cannot do much anyway if the firmware fails. Do not
initialize the ASTDP conenctor if the test fails during device probing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Shixiong Ou <oushixiong@kylinos.cn>
Tested-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-3-tzimmermann@suse.de

Include dmabuf-heaps selftests in the correct entry so that updates to it
can be sent to the right place.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729081202.937-1-yuzenghui@huawei.com

Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729065756.123788-1-oushixiong1025@163.com

Fix build with CONFIG_NOUVEAU_PLATFORM_DRIVER enabled:

../drivers/gpu/drm/nouveau/nouveau_platform.c: In function ‘nouveau_platform_probe’:
../drivers/gpu/drm/nouveau/nouveau_platform.c:29:13: error: unused variable ‘ret’ [-Werror=unused-variable]
   29 |         int ret;
      |             ^~~

Fixes: 961ae5f9 ("drm/nouveau: handle pci/tegra drm_dev_{alloc, register} from common code")
Cc: Ben Skeggs <bskeggs@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729123624.868907-1-jani.nikula@intel.com

Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/,
fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that
the approved verbiage exists in the specification.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711052734.1273652-3-eahariha@linux.microsoft.com

The struct itself lives in nv50_dmac already, just use that.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-38-bskeggs@nvidia.com

Left-overs from the past that are completely unused now.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-37-bskeggs@nvidia.com

The struct itself lives in nouveau_channel already, just use that.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-36-bskeggs@nvidia.com

The only remaining nouveau_drm.master struct member that's being used is
the mutex that protects its object tree.  Move that into nouveau_drm and
remove nouveau_drm.master entirely.

A pending series to remove the "ioctl" layer between DRM and NVKM also
removes the need for object handle lookups, and hence this mutex, but
it's still required for the moment.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-35-bskeggs@nvidia.com

The nouveau_cli that owns the channel is now stored in nouveau_chan, and
it has a pointer to the drm device already.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-34-bskeggs@nvidia.com

nouveau_chan.device is always the same as nouveau_chan.cli.device,
so there's no need to store it separately.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-33-bskeggs@nvidia.com

Both of these are stored in nouveau_cli already, and also allows the
removal of some void casts.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-32-bskeggs@nvidia.com