- 20 Apr, 2015 1 commit
-
-
Tomi Valkeinen authored
We don't need VT switch when suspending/resuming, so disable it. This speeds up suspend/resume. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: NeilBrown <neil@brown.name>
-
- 26 Feb, 2015 11 commits
-
-
Tomi Valkeinen authored
It was found that having two displays enabled and having an NV12 overlay on one of the displays will cause underflows/synclosts. Debugging this pointed to some issue with MFLAG. It is unclear why this issue is happening, but it looks like there is a HW bug related to MFLAG and FIFO management. Disabling MFLAG makes this issue go away, but then we lose the benefit of MFLAG. Also forcing MFLAG always on makes the issue go away. Also, using certain values for MFLAG_START, MFLAG thresholds and PRELOAD makes the issue go away, but there was no obvious logic to which values work and which don't. As a workaround until more information about this is found, force MFLAG always on to make NV12 usable. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
OMAP5 has support for MFLAG feature, which allows DSS to dynamically increase the priority of DISPC's DMA traffic. At the moment we don't have support for it. It was noticed that on DRA7 with high bandwidth use cases we see FIFO underflows. Implementing MFLAG support removed those underflows. Interestingly, on OMAP5 uEVM no such overflows were seen. This patch adds a simple MFLAG implementation, where we use a fixed MFLAG threshold value based on the FIFO size. The thresholds are set to 4/8 of fifo size for low threshold, and 5/8 of fifo size for high threshold. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
At the moment we don't setup FIFO thresholds by default in omapdss. It's supposed to be done by the user of omapdss. And that is missing from omapdrm, causing unoptimal thresholds to be used when using omapdrm. While I believe it's in theory better to allow the user of omapdss to setup the fifo thresholds, in practice we always use the same values, and we could as well setup the thresholds in omapdss. Furthermore, in omapdss init we always swap the FIFO used for GFX and WB overlays, but we don't swap the FIFO thresholds for those overlays (which is the reason for omapdrm using unoptimal HW reset values). So it would make sense to setup the thresholds to account for the swapping of the FIFOs. So, this patch adds code to setup default FIFO tresholds at omapdss init. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
Dispc driver presumes that the callers handle locking for all normal functions. However, omapdrm doesn't handle this, and presumes that all overlay manager registers are private to that overlay manager, and thus presumes that configurations for overlay managers can be written via different threads freely. For many registers the above is true. The exceptions are DISPC_CONTROL and DISPC_CONFIG registers, which contain bits for both LCD and TV overlay managers. Fixing this properly in omapdrm means a big omapdrm rewrite. So, for now, add locking to dispc for the problematic registers. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Somnath Mukherjee <somnath@ti.com>
-
Tomi Valkeinen authored
omapdrm doesn't always configure the overlays correctly, causing the overlay setup functions to be called with zero timings. This leads to division by zero error. This happens, for example, when a HDMI cable is not connected, but a user tries to setup a plane with scaling. Fixing omapdrm is a big job, so for now let's check for the bad timings in DISPC and return an error. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
The common 'struct videomode' does not have a flag to select when the sync signals should be driven. The default behavior of DISPC HW is to drive the sync signal on the opposite pixel clock edge from data signal, which is also what the videomode_to_omap_video_timings() uses. However, it looks like what panels usually expect is that the data and sync signals are driven on the same edge, so let's change videomode_to_omap_video_timings() to set the sync_pclk_edge accordingly. Note that this only affect panels drivers that use videomode_to_omap_video_timings(), probably when getting the video timings directly from DT data. The drivers can still configure the sync_pclk_edge independently if they so wish. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW. The previous patch removed this dependency. Swap the enum values the other way around. This doesn't change the behavior in any way, but makes it easier to debug as value of '1' means HIGH or RISING. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
When configuring the lcd timings, instead of writing enum values directly to the HW, use switch-case to get the value to be programmed. This is safer and also allows us to change the enum values. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
DISPC can drive data lines either on rising or falling pixel clock edge, which can be configured by the user. Sync lines can also be driven on rising or falling pixel clock edge, but additionally the HW can be configured to drive the sync lines on opposite clock edge from the data lines. This opposite edge setting does not make any sense, as the same effect can be achieved by just setting the sync lines to be driven on the other edge compared to the data lines. It feels like some kind of backward compatibility option, even if all DSS versions seem to have the same implementation. To simplify the code and configuration of the signals, and to make the dispc timings more compatible with what is used on other platforms, let's just remove the whole opposite-edge support. The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are changed so that they use the opposite setting from the data edge. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
TFP410 requires that DE is active high and the data and syncs are driven on rising pixel clock edge. However, at the moment the driver doesn't request such syncs, and the end result is that the sync settings depend on default values, which are not right in all cases. Set the sync values explicitly. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
The DISPC driver checks that the buffer address is not 0. However, when using TILER, the address space is TILER specific and 0 is a valid address. Fix the check to allow address of 0 for TILER. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
srinivas pulukuru <srinivas.pulukuru@ti.com>
-
- 25 Feb, 2015 2 commits
-
-
Tomi Valkeinen authored
It has been observed that the current SDA-HOLD time is too short for some board/cable/monitor combinations. Increase the SDA-HOLD time to 1000ns. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
AM43xx supports pixel clock divider of 1, just like all OMAP3+ SoCs. Fix the minimum divider value. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 23 Feb, 2015 3 commits
-
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
- 22 Feb, 2015 21 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Introduce some function for getting the inode (and also the dentry) in an environment where layered/unioned filesystems are in operation. The problem is that we have places where we need *both* the union dentry and the lower source or workspace inode or dentry available, but we can only have a handle on one of them. Therefore we need to derive the handle to the other from that. The idea is to introduce an extra field in struct dentry that allows the union dentry to refer to and pin the lower dentry. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A few fixes that came in too late to make it into the first set of pull requests but would still be nice to have in -rc1. The majority of these are trivial build fixes for bugs that I found myself using randconfig testing, and a set of two patches from Uwe to mark DT strings as 'const' where appropriate, to resolve inconsistent section attributes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make of_device_ids const ARM: make arrays containing machine compatible strings const ARM: mm: Remove Kconfig symbol CACHE_PL310 ARM: rockchip: force built-in regulator support for PM ARM: mvebu: build armada375-smp code conditionally ARM: sti: always enable RESET_CONTROLLER ARM: rockchip: make rockchip_suspend_init conditional ARM: ixp4xx: fix {in,out}s{bwl} data types ARM: prima2: do not select SMP_ON_UP ARM: at91: fix pm declarations ARM: davinci: multi-soc kernels require AUTO_ZRELADDR ARM: davinci: davinci_cfg_reg cannot be init ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile ARM: vexpress: use ARM_CPU_SUSPEND if needed ARM: dts: add I2C device nodes for Broadcom Cygnus ARM: dts: BCM63xx: fix L2 cache properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI patches from James Bottomley: "This is a short patch set representing a couple of left overs from the merge window (debug removal and MAINTAINER changes). Plus one merge window regression (the local workqueue for hpsa) and a set of bug fixes for several issues (two for scsi-mq and the rest an assortment of long standing stuff, all cc'd to stable)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sg: fix EWOULDBLOCK errors with scsi-mq sg: fix unkillable I/O wait deadlock with scsi-mq sg: fix read() error reporting wd719x: add missing .module to wd719x_template hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. fcoe: Transition maintainership to Vasu am53c974: remove left-over debugging code
-
- 21 Feb, 2015 2 commits
-
-
Linus Torvalds authored
Merge tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs pnfs block layout support from Dave Chinner: "This contains the changes to XFS needed to support the PNFS block layout server that you pulled in through Bruce's NFS server tree merge. I originally thought that I'd need to merge changes into the NFS server side, but Bruce had already picked them up and so this is purely changes to the fs/xfs/ codebase. Summary: This update contains the implementation of the PNFS server export methods that enable use of XFS filesystems as a block layout target" * tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: recall pNFS layouts on conflicting access xfs: implement pNFS export operations
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull more NFS client updates from Trond Myklebust: "Highlights include: - Fix a use-after-free in decode_cb_sequence_args() - Fix a compile error when #undef CONFIG_PROC_FS - NFSv4.1 backchannel spinlocking issue - Cleanups in the NFS unstable write code requested by Linus - NFSv4.1 fix issues when the server denies our backchannel request - Cleanups in create_session and bind_conn_to_session" * tag 'nfs-for-3.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Clean up bind_conn_to_session NFSv4.1: Always set up a forward channel when binding the session NFSv4.1: Don't set up a backchannel if the server didn't agree to do so NFSv4.1: Clean up create_session pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit NFSv4: Kill unused nfs_inode->delegation_state field NFS: struct nfs_commit_info.lock must always point to inode->i_lock nfs: Can call nfs_clear_page_commit() instead nfs: Provide and use helper functions for marking a page as unstable SUNRPC: Always manipulate rpc_rqst::rq_bc_pa_list under xprt->bc_pa_lock SUNRPC: Fix a compile error when #undef CONFIG_PROC_FS NFSv4.1: Convert open-coded array allocation calls to kmalloc_array() NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args
-