Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will
not return even when the hvsock socket is writable, under some race
condition. This can happen under the following sequence:
- fd = socket(hvsocket)
- fd_out = dup(fd)
- fd_in = dup(fd)
- start a writer thread that writes data to fd_out with a combination of
  epoll_wait(fd_out, EPOLLOUT) and
- start a reader thread that reads data from fd_in with a combination of
  epoll_wait(fd_in, EPOLLIN)
- On the host, there are two threads that are reading/writing data to the
  hvsocket

stack:
hvs_stream_has_space
hvs_notify_poll_out
vsock_poll
sock_poll
ep_poll

Race condition:
check for epollout from ep_poll():
	assume no writable space in the socket
	hvs_stream_has_space() returns 0
check for epollin from ep_poll():
	assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE)
	hvs_stream_has_space() will clear the channel pending send size
	host will not notify the guest because the pending send size has
		been cleared and so the hvsocket will never mark the
		socket writable

Now, the EPOLLOUT will never return even if the socket write buffer is
empty.

The fix is to set the pending size to the default size and never change it.
This way the host will always notify the guest whenever the writable space
is bigger than the pending size. The host is already optimized to *only*
notify the guest when the pending size threshold boundary is crossed and
not everytime.

This change also reduces the cpu usage somewhat since hv_stream_has_space()
is in the hotpath of send:
vsock_stream_sendmsg()->hv_stream_has_space()
Earlier hv_stream_has_space was setting/clearing the pending size on every
call.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes an issue where TX Timestamps are not arriving on the error queue
when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING.
This can be illustrated with an updated updgso_bench_tx program which
includes the '-T' option to test for this condition. It also introduces
the '-P' option which will call poll() before reading the error queue.

    ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18
    poll timeout
    udp tx:      0 MB/s        1 calls/s      1 msg/s

The "poll timeout" message above indicates that TX timestamp never
arrived.

This patch preserves tx_flags for the first UDP GSO segment. Only the
first segment is timestamped, even though in some cases there may be
benefital in timestamping both the first and last segment.

Factors in deciding on first segment timestamp only:

- Timestamping both first and last segmented is not feasible. Hardware
can only have one outstanding TS request at a time.

- Timestamping last segment may under report network latency of the
previous segments. Even though the doorbell is suppressed, the ring
producer counter has been incremented.

- Timestamping the first segment has the upside in that it reports
timestamps from the application's view, e.g. RTT.

- Timestamping the first segment has the downside that it may
underreport tx host network latency. It appears that we have to pick
one or the other. And possibly follow-up with a config flag to choose
behavior.

v2: Remove tests as noted by Willem de Bruijn <willemb@google.com>
    Moving tests from net to net-next

v3: Update only relevant tx_flag bits as per
    Willem de Bruijn <willemb@google.com>

v4: Update comments and commit message as per
    Willem de Bruijn <willemb@google.com>

Fixes: ee80d1eb ("udp: add udp gso")
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: netem: fix issues with corrupting GSO frames

Corrupting GSO frames currently leads to crashes, due to skb use
after free.  These stem from the skb list handling - the segmented
skbs come back on a list, and this list is not properly unlinked
before enqueuing the segments.  Turns out this condition is made
very likely to occur because of another bug - in backlog accounting.
Segments are counted twice, which means qdisc's limit gets reached
leading to drops and making the use after free very likely to happen.

The bugs are fixed in order in which they were added to the tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Brendan reports that the use of netem's packet corruption capability
leads to strange crashes.  This seems to be caused by
commit d66280b1 ("net: netem: use a list in addition to rbtree")
which uses skb->next pointer to construct a fast-path queue of
in-order skbs.

Packet corruption code has to invoke skb_gso_segment() in case
of skbs in need of GSO.  skb_gso_segment() returns a list of
skbs.  If next pointers of the skbs on that list do not get cleared
fast path list may point to freed skbs or skbs which are also on
the RB tree.

Let's say skb gets segmented into 3 frames:

A -> B -> C

A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's
next pointer didn't get cleared so we have:

h t
|/
A -> B -> C

Now if B and C get also get enqueued successfully all is fine, because
tfifo_enqueue() will overwrite the list in order.  IOW:

Enqueue B:

h    t
|    |
A -> B    C

Enqueue C:

h         t
|         |
A -> B -> C

But if B and C get reordered we may end up with:

h t            RB tree
|/                |
A -> B -> C       B
                   \
                    C

Or if they get dropped just:

h t
|/
A -> B -> C

where A and B are already freed.

To reproduce either limit has to be set low to cause freeing of
segs or reorders have to happen (due to delay jitter).

Note that we only have to mark the first segment as not on the
list, "finish_segs" handling of other frags already does that.

Another caveat is that qdisc_drop_all() still has to free all
segments correctly in case of drop of first segment, therefore
we re-link segs before calling it.

v2:
 - re-link before drop, v1 was leaking non-first segs if limit
   was hit at the first seg
 - better commit message which lead to discovering the above :)
Reported-by: Brendan Galloway <brendan.galloway@netronome.com>
Fixes: d66280b1 ("net: netem: use a list in addition to rbtree")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one.  The backlog length has to be adjusted to account for
new frames.

The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).

Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.

Fixes: 6071bd1a ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Left shifting the signed int value 1 by 31 bits has undefined behaviour
and the shift amount oq_no can be as much as 63.  Fix this by using
BIT_ULL(oq_no) instead.

Addresses-Coverity: ("Bad shift operation")
Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
net: fix quite a few dst_cache crashes reported by syzbot

There are two kinds of crashes reported many times by syzbot with no
reproducer. Call Traces are like:

     BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
     net/ipv4/route.c:1556
       rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
       __mkroute_output net/ipv4/route.c:2332 [inline]
       ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
       ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
       __ip_route_output_key include/net/route.h:125 [inline]
       ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
       ip_route_output_key include/net/route.h:135 [inline]
     ...

   or:

     kasan: GPF could be caused by NULL-ptr deref or user memory access
     RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
       <IRQ>
       rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
       free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
       __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
       rcu_do_batch kernel/rcu/tree.c:2437 [inline]
       invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
       rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
     ...

They were caused by the fib_nh_common percpu member 'nhc_pcpu_rth_output'
overwritten by another percpu variable 'dev->tstats' access overflow in
tipc udp media xmit path when counting packets on a non tunnel device.

The fix is to make udp tunnel work with no tunnel device by allowing not
to count packets on the tstats when the tunnel dev is NULL in Patches 1/3
and 2/3, then pass a NULL tunnel dev in tipc_udp_tunnel() in Patch 3/3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.

Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.

syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:

  BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
  net/ipv4/route.c:1556
    rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
    __mkroute_output net/ipv4/route.c:2332 [inline]
    ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
    ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
    __ip_route_output_key include/net/route.h:125 [inline]
    ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
    ip_route_output_key include/net/route.h:135 [inline]
  ...

or:

  kasan: GPF could be caused by NULL-ptr deref or user memory access
  RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
    <IRQ>
    rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
    free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
    __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
    rcu_do_batch kernel/rcu/tree.c:2437 [inline]
    invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
    rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
  ...

The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.

Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com
Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com
Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com
Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com
Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com
Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com
Fixes: 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by
setting skb's dev to NULL" is also needed by ip6_tunnel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iptunnel_xmit() works as a common function, also used by a udp tunnel
which doesn't have to have a tunnel device, like how TIPC works with
udp media.

In these cases, we should allow not to count pkts on dev's tstats, so
that udp tunnel can work with no tunnel device safely.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently after setting tap0 link up, the tun code wakes tx/rx waited
queues up in tun_net_open() when .ndo_open() is called, however the
IFF_UP flag has not been set yet. If there's already a wait queue, it
would fail to transmit when checking the IFF_UP flag in tun_sendmsg().
Then the saving vhost_poll_start() will add the wq into wqh until it
is waken up again. Although this works when IFF_UP flag has been set
when tun_chr_poll detects; this is not true if IFF_UP flag has not
been set at that time. Sadly the latter case is a fatal error, as
the wq will never be waken up in future unless later manually
setting link up on purpose.

Fix this by moving the wakeup process into the NETDEV_UP event
notifying process, this makes sure IFF_UP has been set before all
waited queues been waken up.
Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In sock_getsockopt(), 'optlen' is fetched the first time from userspace.
'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is
fetched the second time from userspace.

If change it between two fetches may cause security problems or unexpected
behaivor, and there is no reason to fetch it a second time.

To fix this, we need to remove the second fetch.
Signed-off-by: JingYi Hou <houjingyi647@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It appears that a FAILOVER_MSG can come from peer even when the failure
link is resetting (i.e. just after the 'node_write_unlock()'...). This
means the failover procedure on the node has not been started yet.
The situation is as follows:

         node1                                node2
  linkb          linka                  linka        linkb
    |              |                      |            |
    |              |                      x failure    |
    |              |                  RESETTING        |
    |              |                      |            |
    |              x failure            RESET          |
    |          RESETTING             FAILINGOVER       |
    |              |   (FAILOVER_MSG)     |            |
    |<-------------------------------------------------|
    | *FAILINGOVER |                      |            |
    |              | (dummy FAILOVER_MSG) |            |
    |------------------------------------------------->|
    |            RESET                    |            | FAILOVER_END
    |         FAILINGOVER               RESET          |
    .              .                      .            .
    .              .                      .            .
    .              .                      .            .

Once this happens, the link failover procedure will be triggered
wrongly on the receiving node since the node isn't in FAILINGOVER state
but then another link failover will be carried out.
The consequences are:

1) A peer might get stuck in FAILINGOVER state because the 'sync_point'
was set, reset and set incorrectly, the criteria to end the failover
would not be met, it could keep waiting for a message that has already
received.

2) The early FAILOVER_MSG(s) could be queued in the link failover
deferdq but would be purged or not pulled out because the 'drop_point'
was not set correctly.

3) The early FAILOVER_MSG(s) could be dropped too.

4) The dummy FAILOVER_MSG could make the peer leaving FAILINGOVER state
shortly, but later on it would be restarted.

The same situation can also happen when the link is in PEER_RESET state
and a FAILOVER_MSG arrives.

The commit resolves the issues by forcing the link down immediately, so
the failover procedure will be started normally (which is the same as
when receiving a FAILOVER_MSG and the link is in up state).

Also, the function "tipc_node_link_failover()" is toughen to avoid such
a situation from happening.
Acked-by: Jon Maloy <jon.maloy@ericsson.se>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull vfs fixes from Al Viro:
 "MS_MOVE regression fix + breakage in fsmount(2) (also introduced in
  this cycle, along with fsmount(2) itself).

  I'm still digging through the piles of mail, so there might be more
  fixes to follow, but these two are obvious and self-contained, so
  there's no point delaying those..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/namespace: fix unprivileged mount propagation
  vfs: fsmount: add missing mntget()

Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

When propagating mounts across mount namespaces owned by different user
namespaces it is not possible anymore to move or umount the mount in the
less privileged mount namespace.

Here is a reproducer:

  sudo mount -t tmpfs tmpfs /mnt
  sudo --make-rshared /mnt

  # create unprivileged user + mount namespace and preserve propagation
  unshare -U -m --map-root --propagation=unchanged

  # now change back to the original mount namespace in another terminal:
  sudo mkdir /mnt/aaa
  sudo mount -t tmpfs tmpfs /mnt/aaa

  # now in the unprivileged user + mount namespace
  mount --move /mnt/aaa /opt

Unfortunately, this is a pretty big deal for userspace since this is
e.g. used to inject mounts into running unprivileged containers.
So this regression really needs to go away rather quickly.

The problem is that a recent change falsely locked the root of the newly
added mounts by setting MNT_LOCKED. Fix this by only locking the mounts
on copy_mnt_ns() and not when adding a new mount.

Fixes: 3bd045cc ("separate copying and locking mount tree on cross-userns copies")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Tested-by: Christian Brauner <christian@brauner.io>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sys_fsmount() needs to take a reference to the new mount when adding it
to the anonymous mount namespace.  Otherwise the filesystem can be
unmounted while it's still in use, as found by syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: syzbot+99de05d099a170867f22@syzkaller.appspotmail.com
Reported-by: syzbot+7008b8b8ba7df475fdc8@syzkaller.appspotmail.com
Fixes: 93766fbd ("vfs: syscall: Add fsmount() to create a mount for a superblock")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Eric Dumazet says:

====================
tcp: make sack processing more robust

Jonathan Looney brought to our attention multiple problems
in TCP stack at the sender side.

SACK processing can be abused by malicious peers to either
cause overflows, or increase of memory usage.

First two patches fix the immediate problems.

Since the malicious peers abuse senders by advertizing a very
small MSS in their SYN or SYNACK packet, the last two
patches add a new sysctl so that admins can chose a higher
limit for MSS clamping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull RISC-V fixes from Paul Walmsley:
 "This contains fixes, defconfig, and DT data changes for the v5.2-rc
  series.

  The fixes are relatively straightforward:

   - Addition of a TLB fence in the vmalloc_fault path, so the CPU
     doesn't enter an infinite page fault loop

   - Readdition of the pm_power_off export, so device drivers that
     reassign it can now be built as modules

   - A udelay() fix for RV32, fixing a miscomputation of the delay time

   - Removal of deprecated smp_mb__*() barriers

  This also adds initial DT data infrastructure for arch/riscv, along
  with initial data for the SiFive FU540-C000 SoC and the corresponding
  HiFive Unleashed board.

  We also update the RV64 defconfig to include some core drivers for the
  FU540 in the build"

* tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused barrier defines
  riscv: mm: synchronize MMU after pte change
  riscv: dts: add initial board data for the SiFive HiFive Unleashed
  riscv: dts: add initial support for the SiFive FU540-C000 SoC
  dt-bindings: riscv: convert cpu binding to json-schema
  dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
  arch: riscv: add support for building DTB files from DT source data
  riscv: Fix udelay in RV32.
  riscv: export pm_power_off again
  RISC-V: defconfig: enable clocks, serial console

They were introduced in commit fab957c1 ("RISC-V: Atomic and
Locking Code") long after commit 2e39465a ("locking: Remove
deprecated smp_mb__() barriers") removed the remnants of all previous
instances from the tree.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
[paul.walmsley@sifive.com: stripped spurious mbox header from patch
 description; fixed commit references in patch header]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Because RISC-V compliant implementations can cache invalid entries
in TLB, an SFENCE.VMA is necessary after changes to the page table.
This patch adds an SFENCE.vma for the vmalloc_fault path.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
[paul.walmsley@sifive.com: reversed tab->whitespace conversion,
 wrapped comment lines]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org

Add initial board data for the SiFive HiFive Unleashed A00.

Currently the data populated in this DT file describes the board
DRAM configuration and the external clock sources that supply the
PRCI.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Add initial support for the SiFive FU540-C000 SoC.  This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.

This file is expected to grow as more device drivers are added to the
kernel.

This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

At Rob's request, we're starting to migrate our DT binding
documentation to json-schema YAML format.  Start by converting our cpu
binding documentation.  While doing so, document more properties and
nodes.  This includes adding binding documentation support for the E51
and U54 CPU cores ("harts") that are present on this SoC.  These cores
are described in:

    https://static.dev.sifive.com/FU540-C000-v1.0.pdf

This cpus.yaml file is intended to be a starting point and to
evolve over time.  It passes dt-doc-validate as of the yaml-bindings
commit 4c79d42e9216.

This patch was originally based on the ARM json-schema binding
documentation as added by commit 672951cb ("dt-bindings: arm: Convert
cpu binding to json-schema").
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-riscv@lists.infradead.org

Add YAML DT binding documentation for the SiFive FU540 SoC.  This
SoC is documented at:

    https://static.dev.sifive.com/FU540-C000-v1.0.pdf

Passes dt-doc-validate, as of yaml-bindings commit 4c79d42e9216.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Similar to ARM64, add support for building DTB files from DT source
data for RISC-V boards.

This patch starts with the infrastructure needed for SiFive boards.
Boards from other vendors would add support here in a similar form.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.

The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.

So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.

Fixes: b87a5ea3 ("tipc: guarantee group unicast doesn't bypass group broadcast")
Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

 *** DEADLOCK ***

1 lock held by blkid/26581:
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
 valid_state kernel/locking/lockdep.c:2948 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
 mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
 mark_irqflags kernel/locking/lockdep.c:3391 [inline]
 __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:338 [inline]
 ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
 expire_timers kernel/time/timer.c:1366 [inline]
 __run_timers kernel/time/timer.c:1685 [inline]
 __run_timers kernel/time/timer.c:1653 [inline]
 run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
 seq_read+0x9cf/0x1110 fs/seq_file.c:258
 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
 do_loop_readv_writev fs/read_write.c:714 [inline]
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_iter_read+0x4a4/0x660 fs/read_write.c:935
 vfs_readv+0xf0/0x160 fs/read_write.c:997
 kernel_readv fs/splice.c:359 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:414
 do_splice_to+0x127/0x180 fs/splice.c:877
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 __do_kmalloc mm/slab.c:3660 [inline]
 __kmalloc+0x15c/0x740 mm/slab.c:3669
 kmalloc include/linux/slab.h:552 [inline]
 pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
 arp_req_set_public net/ipv4/arp.c:1010 [inline]
 arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
 sock_ioctl+0x3ed/0x780 net/socket.c:1194
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
 __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
 inetdev_destroy net/ipv4/devinet.c:319 [inline]
 inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
 __raw_notifier_call_chain kernel/notifier.c:396 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
 call_netdevice_notifiers net/core/dev.c:1775 [inline]
 rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
 rollback_registered+0x109/0x1d0 net/core/dev.c:8220
 unregister_netdevice_queue net/core/dev.c:9267 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
 unregister_netdevice include/linux/netdevice.h:2631 [inline]
 __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
 tun_detach drivers/net/tun.c:741 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:185 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
 ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_tx_skb_cache_key and tcp_rx_skb_cache_key must be available
even if CONFIG_SYSCTL is not set.

Fixes: 0b7d7f6b ("tcp: add tcp_tx_skb_cache sysctl")
Fixes: ede61ca4 ("tcp: add tcp_rx_skb_cache sysctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc 8.2.0 may report these bogus warnings under some condition:

warning: ‘vnew’ may be used uninitialized in this function
warning: ‘hvs_new’ may be used uninitialized in this function

Actually, the 2 pointers are only initialized and used if the variable
"conn_from_host" is true. The code is not buggy here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
vlan_do_receive() returns false if it does not find vlan_dev. Later
__netif_receive_skb_core() fails to find packet type handler for
skb->protocol 801.1AD and drops the packet.

801.1P header with vlan id 0 should be handled as untagged packets.
This patch fixes it by checking if vlan_id is 0 and processes next vlan
header.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 fixes from Thomas Gleixner:
 "The accumulated fixes from this and last week:

   - Fix vmalloc TLB flush and map range calculations which lead to
     stale TLBs, spurious faults and other hard to diagnose issues.

   - Use fault_in_pages_writable() for prefaulting the user stack in the
     FPU code as it's less fragile than the current solution

   - Use the PF_KTHREAD flag when checking for a kernel thread instead
     of current->mm as the latter can give the wrong answer due to
     use_mm()

   - Compute the vmemmap size correctly for KASLR and 5-Level paging.
     Otherwise this can end up with a way too small vmemmap area.

   - Make KASAN and 5-level paging work again by making sure that all
     invalid bits are masked out when computing the P4D offset. This
     worked before but got broken recently when the LDT remap area was
     moved.

   - Prevent a NULL pointer dereference in the resource control code
     which can be triggered with certain mount options when the
     requested resource is not available.

   - Enforce ordering of microcode loading vs. perf initialization on
     secondary CPUs. Otherwise perf tries to access a non-existing MSR
     as the boot CPU marked it as available.

   - Don't stop the resource control group walk early otherwise the
     control bitmaps are not updated correctly and become inconsistent.

   - Unbreak kgdb by returning 0 on success from
     kgdb_arch_set_breakpoint() instead of an error code.

   - Add more Icelake CPU model defines so depending changes can be
     queued in other trees"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  x86/kasan: Fix boot with 5-level paging and KASAN
  x86/fpu: Don't use current->mm to check for a kthread
  x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
  x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
  x86/resctrl: Don't stop walking closids when a locksetup group is found
  x86/fpu: Update kernel's FPU state before using for the fsave header
  x86/mm/KASLR: Compute the size of the vmemmap section properly
  x86/fpu: Use fault_in_pages_writeable() for pre-faulting
  x86/CPU: Add more Icelake model numbers
  mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
  mm/vmalloc: Fix calculation of direct map addr range

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes:

   - Repair the ktime_get_coarse() functions so they actually deliver
     what they are supposed to: tick granular time stamps. The current
     code missed to add the accumulated nanoseconds part of the
     timekeeper so the resulting granularity was 1 second.

   - Prevent the tracer from infinitely recursing into time getter
     functions in the arm architectured timer by marking these functions
     notrace

   - Fix a trivial compiler warning caused by wrong qualifier ordering"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Repair ktime_get_coarse*() granularity
  clocksource/drivers/arm_arch_timer: Don't trace count reader functions
  clocksource/drivers/timer-ti-dm: Change to new style declaration

Pull RAS fixes from Thomas Gleixner:
 "Two small fixes for RAS:

   - Use a proper search algorithm to find the correct element in the
     CEC array. The replacement was a better choice than fixing the
     crash causes by the original search function with horrible duct
     tape.

   - Move the timer based decay function into thread context so it can
     actually acquire the mutex which protects the CEC array to prevent
     corruption"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  RAS/CEC: Convert the timer callback to a workqueue
  RAS/CEC: Fix binary search function

If mtu probing is enabled tcp_mtu_probing() could very well end up
with a too small MSS.

Use the new sysctl tcp_min_snd_mss to make sure MSS search
is performed in an acceptable range.

CVE-2019-11479 -- tcp mss hardcoded to 48
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Jonathan Looney <jtl@netflix.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Bruce Curtis <brucec@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>