- 22 Sep, 2017 19 commits
-
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
This patch replace GCM IV size value by their constant name. Signed-off-by:
-
Corentin LABBE authored
Many GCM users use directly GCM IV size instead of using some constant. This patch add all IV size constant used by GCM. Signed-off-by:
-
Ryder Lee authored
Currently, empty messages are not supported in GCM mode, hence add a check to prevent producing incorrect results. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Add testmgr and tcrypt tests and vectors for SM3 secure hash. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Add OSCCA SM3 secure hash (OSCCA GM/T 0004-2012 SM3) generic hash transformation. Signed-off-by:
-
Colin Ian King authored
Arrays aesni_simd_skciphers and aesni_simd_skciphers2 are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'aesni_simd_skciphers' was not declared. Should it be static? symbol 'aesni_simd_skciphers2' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
lionel.debieve@st.com authored
Remove err symbol as this is not used in the thread context and the variable is not initialized. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
-
Arvind Yadav authored
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by:
-
Kamil Konieczny authored
* fix documentation of return values for crypto_ahash_init(), crypto_ahash_finup(), crypto_ahash_final(), crypto_ahash_digest() and crypto_ahash_update() Also while at it: * add notes for device driver developers in struct ahash_alg description * fix description of @final method in struct ahash_alg * fix typo in crypto_ahash_finup() description Signed-off-by:
Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by:
-
Arnd Bergmann authored
Without CONFIG_DEBUG_FS, we get a harmless warning: drivers/crypto/axis/artpec6_crypto.c:352:23: error: 'dbgfs_root' defined but not used [-Werror=unused-variable] This moves it into the #ifdef that hides the only user. Fixes: a21eb94f ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Lars Persson <larper@axis.com> Signed-off-by:
-
- 20 Sep, 2017 19 commits
-
-
Stephan Mueller authored
When two adjacent TX SGL are processed and parts of both TX SGLs are pulled into the per-request TX SGL, the wrong per-request TX SGL entries were updated. This fixes a NULL pointer dereference when a cipher implementation walks the TX SGL where some of the SGL entries were NULL. Fixes: e870456d ("crypto: algif_skcipher - overhaul memory...") Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Horia Geantă authored
When built using multi_v7_defconfig, driver does not work on LS1021A: [...] caam 1700000.crypto: can't identify CAAM ipg clk: -2 caam: probe of 1700000.crypto failed with error -2 [...] It turns out we have to detect at runtime whether driver is running on an i.MX platform or not. Cc: <stable@vger.kernel.org> Fixes: 6c3af955 ("crypto: caam - add support for LS1021A") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Arnd Bergmann authored
All older compiler versions up to gcc-4.9 produce these harmless warnings: drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: missing braces around initializer [-Wmissing-braces] drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces] This changes the syntax to something that works on all versions without warnings. Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
LEROY Christophe authored
Today, md5sum fails with error -ENOKEY because a setkey function is set for non hmac hashing algs, see strace output below: mmap(NULL, 378880, PROT_READ, MAP_SHARED, 6, 0) = 0x77f50000 accept(3, 0, NULL) = 7 vmsplice(5, [{"bin/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 378880}], 1, SPLICE_F_MORE|SPLICE_F_GIFT) = 262144 splice(4, NULL, 7, NULL, 262144, SPLICE_F_MORE) = -1 ENOKEY (Required key not available) write(2, "Generation of hash for file kcap"..., 50) = 50 munmap(0x77f50000, 378880) = 0 This patch ensures that setkey() function is set only for hmac hashing. Cc: <stable@vger.kernel.org> Signed-off-by:Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
LEROY Christophe authored
md5sum on some files gives wrong result Exemple: With the md5sum from libkcapi: c15115c05bad51113f81bdaee735dd09 test With the original md5sum: bbdf41d80ba7e8b2b7be3a0772be76cb test This patch fixes this issue Cc: <stable@vger.kernel.org> Signed-off-by:
-
LEROY Christophe authored
Kernel crypto tests report the following error at startup [ 2.752626] alg: hash: Test 4 failed for sha224-talitos [ 2.757907] 00000000: 30 e2 86 e2 e7 8a dd 0d d7 eb 9f d5 83 fe f1 b0 00000010: 2d 5a 6c a5 f9 55 ea fd 0e 72 05 22 This patch fixes it Cc: <stable@vger.kernel.org> Signed-off-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R13 instead of RBP. Both are callee-saved registers, so the substitution is straightforward. Reported-by:
Eric Biggers <ebiggers@google.com> Reported-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Mix things up a little bit to get rid of the RBP usage, without hurting performance too much. Use RDI instead of RBP for the TBL pointer. That will clobber CTX, so spill CTX onto the stack and use R12 to read it in the outer loop. R12 is used as a non-persistent temporary variable elsewhere, so it's safe to use. Also remove the unused y4 variable. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the TBL register, and use RBP to store the pre-aligned stack pointer. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. There's no need to use RBP as a temporary register for the TBL value, because it always stores the same value: the address of the K256 table. Instead just reference the address of K256 directly. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the TBL register, and use RBP to store the pre-aligned stack pointer. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Swap the usages of R12 and RBP. Use R12 for the REG_D register, and use RBP to store the pre-aligned stack pointer. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R11 instead of RBP. Since R11 isn't a callee-saved register, it doesn't need to be saved and restored on the stack. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use RSI instead of RBP for RT1. Since RSI is also used as a the 'dst' function argument, it needs to be saved on the stack until the argument is needed. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R15 instead of RBP. R15 can't be used as the RID1 register because of x86 instruction encoding limitations. So use R15 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. Both are callee-saved registers, so the substitution is straightforward. Reported-by:
-
Josh Poimboeuf authored
Using RBP as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Use R12 instead of RBP. R12 can't be used as the RT0 register because of x86 instruction encoding limitations. So use R12 for CTX and RDI for CTX. This means that CTX is no longer an implicit function argument. Instead it needs to be explicitly copied from RDI. Reported-by:
-
Stephan Mueller authored
During the change to use aligned buffers, the deallocation code path was not updated correctly. The current code tries to free the aligned buffer pointer and not the original buffer pointer as it is supposed to. Thus, the code is updated to free the original buffer pointer and set the aligned buffer pointer that is used throughout the code to NULL. Fixes: 3cfc3b97 ("crypto: drbg - use aligned buffers") CC: <stable@vger.kernel.org> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 16 Sep, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
-
