Pull SCSI fixes from James Bottomley:
 "Two patches in driver frameworks. The iscsi one corrects a bug induced
  by a BPF change to network locking and the other is a regression we
  introduced"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()
  scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case

Pull io_uring fixes from Jens Axboe:

 - fix for async buffered reads if read-ahead is fully disabled (Hao)

 - double poll match fix

 - ->show_fdinfo() potential ABBA deadlock complaint fix

* tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
  io_uring: fix async buffered reads when readahead is disabled
  io_uring: fix potential ABBA deadlock in ->show_fdinfo()
  io_uring: always delete double poll wait entry on match

Pull block fix from Jens Axboe:
 "Single fix for a ->commit_rqs failure case"

* tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
  blk-mq: call commit_rqs while list empty but error happen

Pull epoll fixes from Al Viro:
 "Several race fixes in epoll"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ep_create_wakeup_source(): dentry name can change under you...
  epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
  epoll: replace ->visited/visited_list with generation count
  epoll: do not insert into poll queues until all sanity checks are done

Pull RISC-V fixes from Palmer Dabbelt:
 "Two fixes for this week:

   - The addition of a symbol export for clint_time_val, which has been
     inlined into some timex functions and can be used by drivers.

   - A fix to avoid calling get_cycles() before the timers have been
     probed.

  These both only effect !MMU systems"

* tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Check clint_time_val before use
  clocksource: clint: Export clint_time_val for modules

Pull btrfs fixes from David Sterba:
 "Two more fixes.

  One is for a lockdep warning/lockup (also caught by syzbot), that one
  has been seen in practice. Regarding the other syzbot reports
  mentioned last time, they don't seem to be urgent and reliably
  reproducible so they'll be fixed later.

  The second fix is for a potential corruption when device replace
  finishes and the in-memory state of trim is not copied to the new
  device"

* tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix filesystem corruption after a device replace
  btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
  btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing

Pull power management fixes from Rafael Wysocki:
 "These fix one more issue related to the recent RCU-lockdep changes, a
  typo in documentation and add a missing return statement to
  intel_pstate.

  Specifics:

   - Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
     Hansson)

   - Fix typo in the PM documentation (Yoann Congal)

   - Add return statement that is missing after recent changes in the
     intel_pstate driver (Zhang Rui)"

* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: imx6q: Fixup RCU usage for cpuidle
  Documentation: PM: Fix a reStructuredText syntax error
  cpufreq: intel_pstate: Fix missing return statement

Pull IIO fixes from Greg KH:
 "Here are two small IIO driver fixes for 5.9-rc8 that resolve some
  reported issues:

   - driver name fixed in one driver

   - device name typo fixed

  Both have been in linux-next for a while with no reported problems"

* tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: qcom-spmi-adc5: fix driver name
  iio: adc: ad7124: Fix typo in device name

Pull GPIO fixes from Linus Walleij:
 "Some late GPIO fixes for the v5.9 series:

   - Fix compiler warnings on the OMAP when PM is disabled

   - Clear the interrupt when setting edge sensitivity on the Spreadtrum
     driver.

   - Fix up spurious interrupts on the TC35894.

   - Support threaded interrupts on the Siox controller.

   - Fix resource leaks on the mockup driver.

   - Fix line event handling in syscall compatible mode for the
     character device.

   - Fix an unitialized variable in the PCA953A driver.

   - Fix access to all GPIO IRQs on the Aspeed AST2600.

   - Fix line direction on the AMD FCH driver.

   - Use the bitmap API instead of compiler intrinsics for bit
     manipulation in the PCA953x driver"

* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
  gpio: pca953x: Use bitmap API over implicit GCC extension
  gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
  gpio: aspeed: fix ast2600 bank properties
  gpio/aspeed-sgpio: don't enable all interrupts by default
  gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
  gpio: pca953x: Fix uninitialized pending variable
  gpiolib: Fix line event handling in syscall compatible mode
  gpio: mockup: fix resource leak in error path
  gpio: siox: explicitly support only threaded irqs
  gpio: tc35894: fix up tc35894 interrupt configuration
  gpio: sprd: Clear interrupt when setting the type as edge
  gpio: omap: Fix warnings if PM is disabled

Pull MMC fixes from Ulf Hansson:

 - Fix deadlock when removing MEMSTICK host

 - Workaround broken CMDQ on Intel GLK based IRBIS models

* tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models
  memstick: Skip allocating card when removing host

Commit f227e3ec ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc727 ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.

From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.

Fixes: 83bdc727 ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pm-cpufreq:
  cpufreq: intel_pstate: Fix missing return statement

Since commit ea426c2a ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages.  It happens in __mod_node_page_state().

However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion.  It leads to incorrect (unrealistically high) slab
counters values.  Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes: ea426c2a ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock.  So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.

Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.

However, commit 0ddad21d ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.

It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:

 "I hit a hang with fstest btrfs/187, which does a btrfs send into
  /dev/null. This works by creating a pipe, the write side is given to
  the kernel to write into, and the read side is handed to a thread that
  splices into a file, in this case /dev/null.

  The box that was hung had the write side stuck here [pipe_write] and
  the read side stuck here [splice_from_pipe_next -> pipe_wait].

  [ more details about pipe_wait() scenario ]

  The problem is we're doing the prepare_to_wait, which sets our state
  each time, however we can be woken up either with reads or writes. In
  the case above we race with the WRITER waking us up, and re-set our
  state to INTERRUPTIBLE, and thus never break out of schedule"

Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't.  And the whole "wait for any pipe state change" model really
isn't very good to begin with.

So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.

Fixes: 0ddad21d ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull iommu fixes from Joerg Roedel:

 - Fix a device reference counting bug in the Exynos IOMMU driver.

 - Lockdep fix for the Intel VT-d driver.

 - Fix a bug in the AMD IOMMU driver which caused corruption of the IVRS
   ACPI table and caused IOMMU driver initialization failures in kdump
   kernels.

* tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
  iommu/amd: Fix the overwritten field in IVMD header
  iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()

Pull arm64 fix from Catalin Marinas:
 "A previous commit to prevent AML memory opregions from accessing the
  kernel memory turned out to be too restrictive. Relax the permission
  check to permit the ACPI core to map kernel memory used for table
  overrides"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: permit ACPI core to map kernel memory used for table overrides

Pull drm fixes from Dave Airlie:
 "AMD and vmwgfx fixes.

  Just dequeuing these a bit early as the AMD ones are bit larger than
  I'd prefer, but Alex missed last week so it's a double set of fixes.
  The larger ones are just register header fixes for the new chips that
  were just introduced in rc1 along with some new PCI IDs for new hw.
  Otherwise it is usual fixes.

  The vmwgfx fix was due to some testing I was doing and found we
  weren't booting properly, vmware had the fix internally so hurried it

  vmwgfx:
   - fix a regression due to TTM refactor

  amdgpu:
   - Fix potential double free in userptr handling
   - Sienna Cichlid and Navy Flounder udpates
   - Add Sienna Cichlid PCI IDs
   - Drop experimental flag for navi12
   - Raven fixes
   - Renoir fixes
   - HDCP fix
   - DCN3 fix for clang and older versions of gcc
   - Fix a runtime pm refcount issue"

* tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: disable gfxoff temporarily for navy_flounder
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/vmwgfx: Fix error handling in get_node
  drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
  drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
  drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
  drm/amdgpu/display: fix CFLAGS setup for DCN30
  drm/amd/display: fix return value check for hdcp_work
  drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
  drm/amd/pm: Removed fixed clock in auto mode DPM
  drm/amdgpu: remove experimental flag from navi12
  drm/amdgpu: add device ID for sienna_cichlid (v2)
  drm/amdgpu: use the AV1 defines for VCN 3.0
  drm/amdgpu: add VCN 3.0 AV1 registers
  drm/amdgpu: add the GC 10.3 VRS registers
  drm/amdgpu: prevent double kfree ttm->sg

Pull tracing fixes from Steven Rostedt:
 "Two tracing fixes:

   - Fix temp buffer accounting that caused a WARNING for
     ftrace_dump_on_opps()

   - Move the recursion check in one of the function callback helpers to
     the beginning of the function, as if the rcu_is_watching() gets
     traced, it will cause a recursive loop that will crash the kernel"

* tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Move RCU is watching check after recursion check
  tracing: Fix trace_find_next_entry() accounting of temp buffer size

Lock(&iommu->lock) without disabling irq causes lockdep warnings.

[   12.703950] ========================================================
[   12.703962] WARNING: possible irq lock inversion dependency detected
[   12.703975] 5.9.0-rc6+ #659 Not tainted
[   12.703983] --------------------------------------------------------
[   12.703995] systemd-udevd/284 just changed the state of lock:
[   12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
               iommu_flush_dev_iotlb.part.57+0x2e/0x90
[   12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[   12.704043]  (&iommu->lock){+.+.}-{2:2}
[   12.704045]

               and interrupts could create inverse lock ordering between
               them.

[   12.704073]
               other info that might help us debug this:
[   12.704085]  Possible interrupt unsafe locking scenario:

[   12.704097]        CPU0                    CPU1
[   12.704106]        ----                    ----
[   12.704115]   lock(&iommu->lock);
[   12.704123]                                local_irq_disable();
[   12.704134]                                lock(device_domain_lock);
[   12.704146]                                lock(&iommu->lock);
[   12.704158]   <Interrupt>
[   12.704164]     lock(device_domain_lock);
[   12.704174]
                *** DEADLOCK ***
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Commit 387caf0b ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:

ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum

Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.

Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.

Fixes: 387caf0b ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

When driver has been converted to the bitmap API the non-bitmap functions
started behaving differently on 32-bit BE architectures since the bytes in
two consequent unsigned longs are in different order in comparison to byte
array. Hence if the chip had had more than 32 lines the memset() call over
it would have not set up upper lines correctly.
Although it's currently a theoretical case (no supported chips of this type
has 32+ lines), it's better to provide a clean code to avoid people thinking
this is okay and potentially producing not fully working things.

Fixes: 35d13d94 ("gpio: pca953x: convert to use bitmap API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

In IRQ handler we have to clear bitmap before use. Currently
the GCC extension has been used for that. For sake of the consistency
switch to bitmap API. As expected bloat-o-meter shows no difference
in the object size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'amd-drm-fixes-5.9-2020-09-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-09-30:

amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930161326.4243-1-alexander.deucher@amd.com

Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.

Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.

Fixes: 1583052d ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull clk fixes from Stephen Boyd:
 "Another batch of clk driver fixes:

   - Make sure DRAM and ChipID region doesn't get disabled on Exynos

   - Fix a SATA failure on Tegra

   - Fix the emac_ptp clk divider on stratix10"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
  clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
  clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
  clk: tegra: Always program PLL_E when enabled
  clk: tegra: Capitalization fixes
  clk: samsung: Keep top BPLL mux on Exynos542x enabled

The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6
because clint_time_val is used even before CLINT driver is probed
at following places:
1. rand_initialize() calls get_cycles() which in-turn uses
   clint_time_val
2. boot_init_stack_canary() calls get_cycles() which in-turn
   uses clint_time_val

The issue#1 (above) is fixed by providing custom random_get_entropy()
for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of
boot_init_stack_canary() on get_cycles() and this is aligned with the
boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel.

Fixes: d5be89a8 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.

This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.

This is trivial to reproduce and the following script triggers the bug:

  $ cat reproducer.sh
  #!/bin/bash

  DEV1="/dev/sdg"
  DEV2="/dev/sdh"
  DEV3="/dev/sdi"

  wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null

  # Create a raid1 test fs on 2 devices.
  mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
  mount $DEV1 /mnt/btrfs

  xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo

  echo "Starting to replace $DEV1 with $DEV3"
  btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
  echo

  echo "Running fstrim"
  fstrim /mnt/btrfs
  echo

  echo "Unmounting filesystem"
  umount /mnt/btrfs

  echo "Mounting filesystem in degraded mode using $DEV3 only"
  wipefs -a $DEV1 $DEV2 &> /dev/null
  mount -o degraded $DEV3 /mnt/btrfs
  if [ $? -ne 0 ]; then
          dmesg | tail
          echo
          echo "Failed to mount in degraded mode"
          exit 1
  fi

  echo
  echo "File foo data (expected all bytes = 0xab):"
  od -A d -t x1 /mnt/btrfs/foo

  umount /mnt/btrfs

When running the reproducer:

  $ ./replace-test.sh
  wrote 10485760/10485760 bytes at offset 0
  10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
  Starting to replace /dev/sdg with /dev/sdi

  Running fstrim

  Unmounting filesystem
  Mounting filesystem in degraded mode using /dev/sdi only
  mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
  [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
  [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
  [19582.208293] BTRFS info (device sdi): allowing degraded mounts
  [19582.208298] BTRFS info (device sdi): disk space caching is enabled
  [19582.208301] BTRFS info (device sdi): has skinny extents
  [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing
  [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
  [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0
  [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
  [19582.231576] BTRFS error (device sdi): open_ctree failed

  Failed to mount in degraded mode

So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.

A test case for fstests follows soon.

Fixes: 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex.  As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock.  Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.

There's a report from syzbot probably hitting one of the cases where
the bd_mutex and device_list_mutex are taken in the wrong order, however
it's not with device replace, like this patch fixes. As there's no
reproducer available so far, we can't verify the fix.

https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/
dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419

  WARNING: possible circular locking dependency detected
  5.9.0-rc5-syzkaller #0 Not tainted
  ------------------------------------------------------
  syz-executor.0/6878 is trying to acquire lock:
  ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804

  but task is already holding lock:
  ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255
	 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109
	 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916
	 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline]
	 find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127
	 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
	 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
	 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
	 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
	 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
	 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
	 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
	 do_writepages+0xec/0x290 mm/page-writeback.c:2352
	 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
	 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
	 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
	 wb_do_writeback fs/fs-writeback.c:2039 [inline]
	 wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
	 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
	 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
	 kthread+0x3b5/0x4a0 kernel/kthread.c:292
	 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

  -> #3 (sb_internal#2){.+.+}-{0:0}:
	 percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
	 __sb_start_write+0x234/0x470 fs/super.c:1672
	 sb_start_intwrite include/linux/fs.h:1690 [inline]
	 start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624
	 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline]
	 find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127
	 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
	 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
	 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
	 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
	 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
	 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
	 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
	 do_writepages+0xec/0x290 mm/page-writeback.c:2352
	 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
	 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
	 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
	 wb_do_writeback fs/fs-writeback.c:2039 [inline]
	 wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
	 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
	 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
	 kthread+0x3b5/0x4a0 kernel/kthread.c:292
	 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

  -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
	 __flush_work+0x60e/0xac0 kernel/workqueue.c:3041
	 wb_shutdown+0x180/0x220 mm/backing-dev.c:355
	 bdi_unregister+0x174/0x590 mm/backing-dev.c:872
	 del_gendisk+0x820/0xa10 block/genhd.c:933
	 loop_remove drivers/block/loop.c:2192 [inline]
	 loop_control_ioctl drivers/block/loop.c:2291 [inline]
	 loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257
	 vfs_ioctl fs/ioctl.c:48 [inline]
	 __do_sys_ioctl fs/ioctl.c:753 [inline]
	 __se_sys_ioctl fs/ioctl.c:739 [inline]
	 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (loop_ctl_mutex){+.+.}-{3:3}:
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 lo_open+0x19/0xd0 drivers/block/loop.c:1893
	 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507
	 blkdev_get fs/block_dev.c:1639 [inline]
	 blkdev_open+0x227/0x300 fs/block_dev.c:1753
	 do_dentry_open+0x4b9/0x11b0 fs/open.c:817
	 do_open fs/namei.c:3251 [inline]
	 path_openat+0x1b9a/0x2730 fs/namei.c:3368
	 do_filp_open+0x17e/0x3c0 fs/namei.c:3395
	 do_sys_openat2+0x16d/0x420 fs/open.c:1168
	 do_sys_open fs/open.c:1184 [inline]
	 __do_sys_open fs/open.c:1192 [inline]
	 __se_sys_open fs/open.c:1188 [inline]
	 __x64_sys_open+0x119/0x1c0 fs/open.c:1188
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&bdev->bd_mutex){+.+.}-{3:3}:
	 check_prev_add kernel/locking/lockdep.c:2496 [inline]
	 check_prevs_add kernel/locking/lockdep.c:2601 [inline]
	 validate_chain kernel/locking/lockdep.c:3218 [inline]
	 __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
	 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
	 __mutex_lock_common kernel/locking/mutex.c:956 [inline]
	 __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
	 blkdev_put+0x30/0x520 fs/block_dev.c:1804
	 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
	 btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
	 btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
	 close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
	 close_fs_devices fs/btrfs/volumes.c:1193 [inline]
	 btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
	 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
	 generic_shutdown_super+0x144/0x370 fs/super.c:464
	 kill_anon_super+0x36/0x60 fs/super.c:1108
	 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
	 deactivate_locked_super+0x94/0x160 fs/super.c:335
	 deactivate_super+0xad/0xd0 fs/super.c:366
	 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
	 task_work_run+0xdd/0x190 kernel/task_work.c:141
	 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
	 exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
	 exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
	 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_devs->device_list_mutex);
				 lock(sb_internal#2);
				 lock(&fs_devs->device_list_mutex);
    lock(&bdev->bd_mutex);

   *** DEADLOCK ***

  3 locks held by syz-executor.0/6878:
   #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365
   #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178
   #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159

  stack backtrace:
  CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x198/0x1fd lib/dump_stack.c:118
   check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
   check_prev_add kernel/locking/lockdep.c:2496 [inline]
   check_prevs_add kernel/locking/lockdep.c:2601 [inline]
   validate_chain kernel/locking/lockdep.c:3218 [inline]
   __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
   lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
   __mutex_lock_common kernel/locking/mutex.c:956 [inline]
   __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
   blkdev_put+0x30/0x520 fs/block_dev.c:1804
   btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
   btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
   btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
   close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
   close_fs_devices fs/btrfs/volumes.c:1193 [inline]
   btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
   close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
   generic_shutdown_super+0x144/0x370 fs/super.c:464
   kill_anon_super+0x36/0x60 fs/super.c:1108
   btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
   deactivate_locked_super+0x94/0x160 fs/super.c:335
   deactivate_super+0xad/0xd0 fs/super.c:366
   cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
   task_work_run+0xdd/0x190 kernel/task_work.c:141
   tracehook_notify_resume include/linux/tracehook.h:188 [inline]
   exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
   exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
   syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x460027
  RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027
  RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0
  RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b
  R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460
  R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add syzbot reference ]
Signed-off-by: David Sterba <dsterba@suse.com>

The commit eb1f0023 ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.

[6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)

To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.

This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix missing return statement when writing "off" to intel_pstate status
sysfs I/F.

Fixes: 55671ea3 ("cpufreq: intel_pstate: Free memory only when turning off")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.

Fixes: 02cf91c1 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'gpio-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio fixes for v5.9

- correct logic of GPIO_LINE_DIRECTION in gpio-amd-fch

clint_time_val will soon be used by the RISC-V implementation of
random_get_entropy(), which is a static inline function that may be used by
modules (at least CRYPTO_JITTERENTROPY=m).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

One vmwgfx regression fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930041000.2423-1-rscheidegger.oss@gmail.com

ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>

The kernel may fail to boot or devices may fail to come up when
initializing iscsi_tcp devices starting with Linux 5.8.

Commit a79af8a6 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param
libiscsi function") introduced getpeername() within the session spinlock.

Commit 1b66d253 ("bpf: Add get{peer, sock}name attach types for
sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(),
which acquires a mutex and when used from iscsi_tcp devices can now lead to
"BUG: scheduling while atomic:" and subsequent damage.

Ensure that the spinlock is released before calling getpeername() or
getsockname(). sock_hold() and sock_put() are used to ensure that the
socket reference is preserved until after the getpeername() or
getsockname() complete.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345
Link: https://lkml.org/lkml/2020/7/28/1085
Link: https://lkml.org/lkml/2020/8/31/459
Link: https://lore.kernel.org/r/20200928043329.606781-1-mark.mielke@gmail.com
Fixes: a79af8a6 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function")
Fixes: 1b66d253 ("bpf: Add get{peer, sock}name attach types for sock_addr")
Cc: stable@vger.kernel.org
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull devicetree fixes from Rob Herring:

 - Fix handling of HOST_EXTRACFLAGS for dtc

 - Several warning fixes for DT bindings

* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
  dt-bindings: Fix 'reg' size issues in zynqmp examples
  ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
  dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
  dt-bindings: crypto: sa2ul: fix a DT binding check warning

autofs got broken in some configurations by commit 13c164b1
("autofs: switch to kernel_write") because there is now an extra LSM
permission check done by security_file_permission() in rw_verify_area().

autofs is one if the few places that really does want the much more
limited __kernel_write(), because the write is an internal kernel one
that shouldn't do any user permission checks (it also doesn't need the
file_start_write/file_end_write logic, since it's just a pipe).

There are a couple of other cases like that - accounting, core dumping,
and splice - but autofs stands out because it can be built as a module.

As a result, we need to export this internal __kernel_write() function
again.

We really don't want any other module to use this, but we don't have a
"EXPORT_SYMBOL_FOR_AUTOFS_ONLY()".  But we can mark it GPL-only to at
least approximate that "internal use only" for licensing.

While in this area, make autofs pass in NULL for the file position
pointer, since it's always a pipe, and we now use a NULL file pointer
for streaming file descriptors (see file_ppos() and commit 438ab720:
"vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files")

This effectively reverts commits 9db97752 ("fs: unexport
__kernel_write") and 13c164b1 ("autofs: switch to kernel_write").

Fixes: 13c164b1 ("autofs: switch to kernel_write")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>