- 25 Aug, 2008 22 commits
-
-
Andreas Mohr authored
- more register naming work - finally figured out that weird CR register stuff (and did I mention that I hate _really_ undecipherable open-coded values?) - fix handling of IRQ sharing in interrupt handler (hopefully properly, otherwise I'd be grateful to hear your pedantic comments ;) - add handy SPECS_PAGE references wherever useful - comments, cleanup - add me as module author Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
ALC269 capture source wasn't properly set up. It's an independent MUX (0x23), not a source of ADC. Signed-off-by:
-
Takashi Iwai authored
Check continuous pages in the buffer set up so that the number of BDL is reduced. Also increased the max buffer size. Signed-off-by:
-
Takashi Iwai authored
The errors at buffer preallocations aren't fatal and safe to ignore. The buffer will be allocated dynamically when opened. Signed-off-by:
-
Takashi Iwai authored
Check the continuity of allocated pages to reduce the BDL size as much as possible so that it can use more than 1MB buffers. Signed-off-by:
-
Takashi Iwai authored
Most hardwares have limited buffer-descriptor table length. This also restricts the max buffer size of the sound driver. For example, snd-hda-intel has 1MB buffer size limit, and this is because it can have at most 256 BDL entries. For supporting larger buffers, we need to allocate larger pages even for sg-buffers. This patch changes the sgbuf allocation code to try to allocate larger pages first. At each head of the allocated pages, the number of allocated pages is stored in the lowest bits of the corresponding entry of the table addr field. This change isn't visible as long as the driver uses snd_sgbuf_get_addr() helper. Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size(). This returns the size of the chunk on continuous pages starting at the given position offset. If the chunk reaches to a non-continuous page, it returns the size to the boundary. Signed-off-by:
-
Takashi Iwai authored
snd_dma_alloc_pages_fallback() always tries to reduce the size in a half, but it's not good when the given size isn't a power-of-two. Check it first then try to align. Signed-off-by:
-
Takashi Iwai authored
Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by:
-
Alexander Beregalov authored
It is ALSA bug #1754. D6 bit in 02 register is PW4. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
ALC269 codec has a beep, but it was not used, so far. Create a beep control appropriately. Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Krzysztof Helt authored
Replace snd_opl3sa2_info_xxx() with snd_wss_info_xxx(). Drop check of card->private_data which cannot be NULL if card is not NULL (spotted by Rene Herman). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Andreas Mohr authored
- use specs-derived register name enums instead of open-coded numeric values, for better understanding of things - fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but instead the io _base_ which has multiplexed _access_ to GCR config space, at _sub_ registers 0x08 and 0x0c) - add FIXME comments about a race condition and MPU401 features Signed-off-by: -
Takashi Iwai authored
Added tiwai to MAINTAINERS (per request of akpm) Signed-off-by:
-
Thomas Bogendoerfer authored
With the restructering of the indy button handling the old OSS HAL2 driver got broken. Since there is a new ALSA driver for HAL2, the experimental OSS driver is obsolete and will be removed by this patch. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
When bdl_pos_adj=0 is given, disable the position-check and the delayed period update mechanism. Usually bdl_pos_adj=0 is set only for the debugging purpose on really broken hardwares. It's better to disable the extra complexity in such a case. Signed-off-by:
-
Krzysztof Helt authored
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter. Signed-off-by:
-
Takashi Iwai authored
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by:
-
Krzysztof Helt authored
Remove card pointer from the snd_opl3sa2 structure and break circular reference snd_card->snd_opl3sa2->snd_card. Signed-off-by:
-
Takashi Iwai authored
Set up channel information for HDMI widgets. This will allow LPCM with multiple channels supported on some HDMI devices. TODO: It still doesn't check ELD and doesn't change PCM parameters dynamically. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 19 Aug, 2008 1 commit
-
-
Ilpo Järvinen authored
Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
- 15 Aug, 2008 8 commits
-
-
Jaroslav Kysela authored
Signed-off-by: -
Jaroslav Kysela authored
checkpatch.pl does not like assignment in if condition Signed-off-by: -
Daniel THOMPSON authored
The dummy driver uses runtime->private_free but still frees its pcm structures on error paths. This is esoteric because the error paths in question are unreachable. Thus the bug is only a problem when someone copies this code into other drivers. Signed-off-by:
Daniel R Thompson <daniel.thompson@st.com> Signed-off-by:
-
Matthew Ranostay authored
Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs with certain revision id's. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Dynamically create capture mux volume controls when a output amp is detected. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
Takashi Iwai authored
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by:
-
Takashi Iwai authored
Added the missing description of module parameters of usb-audio driver to ALSA-Configuration.txt. Signed-off-by:
-
- 13 Aug, 2008 9 commits
-
-
Jaroslav Kysela authored
Export HDA codec subvendor ID and revision ID to user space via the components variable. Our alsactl utility requires these values for the perfect hardware identification. Signed-off-by: -
Alexander Beregalov authored
ALSA-Configuration.txt: supported cards update Signed-off-by:
-
Alexander Beregalov authored
sound/pci: supported cards update Signed-off-by:
-
Takashi Iwai authored
The widget node 0x21 should be initialized as unmuted/full (0dB) as default. This will reduce additional manual work by user at the first time use. Signed-off-by:
-
Takashi Iwai authored
The SPDIF output is toggled at each time any SPDIF status bits are changed because of the known problems on some codecs. But, this also results in loosing the sync, and the problem is more obvious on HDMI output over SPDIF. Since the toggle is necessary only for some codecs, we should check whether this workaround is needed and skip if unnecessary. Signed-off-by:
-
Alexander Beregalov authored
sound/pci/Kconfig: update for ice1712/24 Signed-off-by:
-
Alexander Beregalov authored
ice1724/revo: simple clean up Signed-off-by:
-
Takashi Iwai authored
Use the standard WARN() macro for snd_BUG(). Signed-off-by:
-
Takashi Iwai authored
Remove snd_assert() completely now. Signed-off-by:
-
