- 17 Apr, 2013 35 commits
-
-
Sebastian Ott authored
Uninline pci related instruction wrappers to de-bloat the code: add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302) This is especially useful for the inlined pci read and write functions which are used all over the kernel. Also remove the unused __stpcifc while at it. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Use pcibios_add_device to do arch specific device initialization. This function will be called during pci_bus_add_device. Reviewed-by:
-
Sebastian Ott authored
Don't modify function handles to get a disabled handle - call clp_disable_fh. With this change we also do no longer deconfigure enabled functions. Reviewed-by:
-
Sebastian Ott authored
Use the debugfs to keep track of a pci function's status changes. Reviewed-by:
-
Sebastian Ott authored
The hash used for mapping irq numbers to msi descriptors does not utilize all buckets that were allocated. Fix this by using the same value (computed by the number of bits used for the hash function) at relevant places. Reviewed-by:
-
Michael Holzheu authored
This patch adds the last breaking event address as parameter for 31 bit compat program signal handlers as it is already done for 64 bit programs. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Haberland authored
If too many ccw requests are pre-build before a suspend/resume cycle the device might not get enough memory to do path verification during resume. Requeue requests to the block device request queue on suspend and free pre-build ccw requests. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
Reorganize format IO requests and enable usage of PAV. Signed-off-by:
-
Sebastian Ott authored
cio_validate_subchannel is used to do some basic checks to find out if it's worth to further investigate a subchannel. Move the allocation and initialization of the subchannels locks to css_alloc_subchannel. Clean up the functions involved while at it. Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Via ccw_device_init_count we keep track of how many devices are in asynchronous device recognition/initialization. For early devices this variable was not only used prior to its initialization but used incorrectly (incremented but never decremented). Fix this by using static initialization for this variable (and friends), make them visible to device.c only, and decrement the counter after recognition of early devices is finished. Reviewed-by:
-
Sebastian Ott authored
Make css_probe_device static and remove an unimplemented prototype. Reviewed-by:
-
Sebastian Ott authored
Use cio_register_early_subchannels to register early subchannels which are already in use. Call this function before we do the actual subchannel scanning loop. This helps us to get rid of some more special cases regarding the console subchannel. Reviewed-by:
-
Sebastian Ott authored
Remove the static console ccw device (and friends) and use dynamic allocation for these structures. With this change the console device is treated (mostly) like any other ccw device and we can remove some special cases. Reviewed-by:
-
Sebastian Ott authored
Remove the static console subchannel (and friends) and use dynamic allocation for these structures. With this change the console subchanel is treated (mostly) like any other subchannel and we can remove some special cases. Reviewed-by:
-
Sebastian Ott authored
Split the subchannel registration in device_initialize and device_add and move the initialization part inside the allocation function. With this change we can use refcounting during the complete lifespan of a subchannel which is important for devices where we do the actually registration at a later time. Reviewed-by:
-
Sebastian Ott authored
force_console is used to wake up the CCW based console device to print a panic message in case something goes wrong in a suspend or resume cycle. Stop using the static console_subchannel and add a parameter to this function to specify which ccw device we have to wake up. Reviewed-by:
-
Sebastian Ott authored
wait_cons_dev is used to busy wait for an interrupt on the console ccw device. Stop using the static console_subchannel and add a parameter to this function to specify on which ccw device/subchannel we have to do the polling. While at it rename the function to ccw_device_wait_idle and move it to device.c Reviewed-by:
-
Michael Holzheu authored
Since commit 5f954c34 ([S390] hibernation: fix lowcore handling) the absolute zero lowcore is lost during suspend/resume. For example, this leads to the problem that the re-IPL device for kdump is no longer set after resume. With this patch during suspend a buffer is allocated in the new PM notifier "suspend_pm_cb" and then the absolute zero lowcore is saved to that buffer. The resume code then copies back this buffer to absolute zero and afterwards the PM notifier releases the memory. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Akinobu Mita authored
Use BITS_TO_LONGS() instead of __BITOPS_WORDS() that is considered to be private macro in asm/bitops.h for s390. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
Remove unused __BITOPS_ALIGN, and replace __BITOPS_WORDSIZE with BITS_PER_LONG. Signed-off-by:
-
Heiko Carstens authored
Use sske with multiple block control to initialize storage keys within a 1 MB frame at once. It turned out that the sske with mb=1 is an order of magnitude faster than pfmf. This is only an issue for very large systems (several 100GB) where storage key initialization could last more than a minute. Signed-off-by:
-
Heiko Carstens authored
dumpstack() did not always print a sane callchain when being called. The reason is that show_trace() accessed register 15 directly to get the current stack pointer and passed that pointer to __show_trace() which expects a valid stack frame pointer as argument. However due to tail call optimization the stack frame may not exist anymore when __show_trace() gets called and therefore an invalid stack frame pointer gets passed. To prevent that disable tail call optimization for call chain walking functions. So move all the show_* functions to a dumpstack.c file like other architectures have it already and add a -fno-optimize-sibling-calls compile flag to both dumpstack.c and stacktrace.c to prevent tail call optimization. Fixes callchains that looked e.g. like this: [ 12.868258] Call Trace: [ 12.868262] ([<0000000000008000>] 0x8000) Signed-off-by:
-
Alexandru Gheorghiu authored
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by:
Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by:
-
Alexandru Gheorghiu authored
Rewrote conditional statement and eliminated the out_kthread label. Signed-off-by:
-
Zhang Yanfei authored
remove cast for kzalloc return value. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Stelian Nirlu authored
Signed-off-by:
Stelian Nirlu <steliannirlu@gmail.com> Signed-off-by:
-
Peter Oberparleiter authored
Make use of the stored copy of format 1 channel-path data instead of querying the information every time the corresponding function is called. Reviewed-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Collect format 1 channel-path description data for each CHPID and update the information in one place. Reviewed-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Michael Holzheu authored
Signed-off-by:
-
Stefan Raspl authored
Pass buffer length in extra parameter. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by:
-
Wei Yongjun authored
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Martin Schwidefsky authored
To avoid cache synonyms on System zEC12 32 independent zero pages are required, one for each combination for bits 2**12 to 2**16 of the virtual address. To avoid wasting too much memory on small virtual systems the number of zero pages is limited to 4 if the memory size is less or equal to 64MB. Signed-off-by: -
Martin Schwidefsky authored
Protection exception usually are suppressing and the fault handler needs to rewind the PSW by the instruction length to get the correct fault address. Except for protection exceptions while the CPU is in the middle of a transaction. The CPU stores the transaction abort PSW at the start of the transaction, if the transaction is aborted the PSW is already correct and may not be modified by the fault handler. Signed-off-by:
-
- 15 Apr, 2013 2 commits
-
-
Michael Holzheu authored
For s390 the page table mapping for the crashkernel memory is removed to protect the pre-loaded kdump kernel and ramdisk. Because the crashkernel memory is not included in the page tables for suspend/resume it is not included in the suspend image. Therefore after resume the resumed system does no longer contain the pre-loaded kdump kernel and when kdump is triggered it fails. This patch adds a PM notifier that creates the page tables before suspend is done and removes them for resume. This ensures that the kdump kernel is included in the suspend image. Signed-off-by:
-
Linus Torvalds authored
-
- 14 Apr, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set x86/mm/cpa/selftest: Fix false positive in CPA self test x86/mm/cpa: Convert noop to functional fix x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixlets" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix accounting on multi-threaded processes sched/debug: Fix sd->*_idx limit range avoiding overflow sched_clock: Prevent 64bit inatomicity on 32bit systems sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix error return code ftrace: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, always make sure it's NUL terminated perf: Fix ring_buffer perf_output_space() boundary calculation perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()
-
