- 16 Mar, 2018 2 commits
-
-
Toshiaki Makita authored
With reorder header off, received packets are untagged in skb_vlan_untag() called from within __netif_receive_skb_core(), and later the tag will be inserted back in vlan_do_receive(). This caused out of order vlan headers when we create a vlan device on top of another vlan device, because vlan_do_receive() inserts a tag as the outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag() and inserted back in vlan_do_receive(), then the inner tag is next removed and inserted back as the outermost tag. This patch fixes the behaviour by inserting the inner tag at the right position. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by:Brandon Carpenter <brandon.carpenter@cypherpath.com> Fixes: a6e18ff1 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by:
-
- 15 Mar, 2018 2 commits
-
-
Roman Mashak authored
If set/unset mode of the tunnel_key action is not provided, ->init() still returns 0, and the caller proceeds with bogus 'struct tc_action *' object, this results in crash: % tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1 [ 35.805515] general protection fault: 0000 [#1] SMP PTI [ 35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd serio_raw [ 35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ #286 [ 35.808929] RIP: 0010:tcf_action_init+0x90/0x190 [ 35.809457] RSP: 0018:ffffb8edc068b9a0 EFLAGS: 00010206 [ 35.810053] RAX: 1320c000000a0003 RBX: 0000000000000001 RCX: 0000000000000000 [ 35.810866] RDX: 0000000000000070 RSI: 0000000000007965 RDI: ffffb8edc068b910 [ 35.811660] RBP: ffffb8edc068b9d0 R08: 0000000000000000 R09: ffffb8edc068b808 [ 35.812463] R10: ffffffffc02bf040 R11: 0000000000000040 R12: ffffb8edc068bb38 [ 35.813235] R13: 0000000000000000 R14: 0000000000000000 R15: ffffb8edc068b910 [ 35.814006] FS: 00007f3d0d8556c0(0000) GS:ffff91d1dbc40000(0000) knlGS:0000000000000000 [ 35.814881] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.815540] CR2: 000000000043f720 CR3: 0000000019248001 CR4: 00000000001606a0 [ 35.816457] Call Trace: [ 35.817158] tc_ctl_action+0x11a/0x220 [ 35.817795] rtnetlink_rcv_msg+0x23d/0x2e0 [ 35.818457] ? __slab_alloc+0x1c/0x30 [ 35.819079] ? __kmalloc_node_track_caller+0xb1/0x2b0 [ 35.819544] ? rtnl_calcit.isra.30+0xe0/0xe0 [ 35.820231] netlink_rcv_skb+0xce/0x100 [ 35.820744] netlink_unicast+0x164/0x220 [ 35.821500] netlink_sendmsg+0x293/0x370 [ 35.822040] sock_sendmsg+0x30/0x40 [ 35.822508] ___sys_sendmsg+0x2c5/0x2e0 [ 35.823149] ? pagecache_get_page+0x27/0x220 [ 35.823714] ? filemap_fault+0xa2/0x640 [ 35.824423] ? page_add_file_rmap+0x108/0x200 [ 35.825065] ? alloc_set_pte+0x2aa/0x530 [ 35.825585] ? finish_fault+0x4e/0x70 [ 35.826140] ? __handle_mm_fault+0xbc1/0x10d0 [ 35.826723] ? __sys_sendmsg+0x41/0x70 [ 35.827230] __sys_sendmsg+0x41/0x70 [ 35.827710] do_syscall_64+0x68/0x120 [ 35.828195] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 35.828859] RIP: 0033:0x7f3d0ca4da67 [ 35.829331] RSP: 002b:00007ffc9f284338 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 35.830304] RAX: ffffffffffffffda RBX: 00007ffc9f284460 RCX: 00007f3d0ca4da67 [ 35.831247] RDX: 0000000000000000 RSI: 00007ffc9f2843b0 RDI: 0000000000000003 [ 35.832167] RBP: 000000005aa6a7a9 R08: 0000000000000001 R09: 0000000000000000 [ 35.833075] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000 [ 35.833997] R13: 00007ffc9f2884c0 R14: 0000000000000001 R15: 0000000000674640 [ 35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2 fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48 8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c [ 35.837442] RIP: tcf_action_init+0x90/0x190 RSP: ffffb8edc068b9a0 [ 35.838291] ---[ end trace a095c06ee4b97a26 ]--- Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Ursula Braun authored
Closing of a listen socket wakes up kernel_accept() of smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker() gives up the internal clcsock. The wait logic introduced with commit 127f4970 ("net/smc: release clcsock from tcp_listen_worker") might wait longer than necessary. This patch implements the idea to implement the wait just with flush_work(), and gets rid of the extra smc_close_wait_listen_clcsock() function. Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker") Reported-by:
Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
- 14 Mar, 2018 13 commits
-
-
Cathy Zhou authored
The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the sunvnet driver does not support GSO for sctp. Here we remove the NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO instead. Signed-off-by:
Cathy Zhou <Cathy.Zhou@Oracle.COM> Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.16-20180314' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-14 this is a pull request of two patches for net/master. Both patches are by Andri Yngvason and fix problems in the cc770 driver, that show up quite fast on RT systems, but also on non RT setups. ==================== Signed-off-by:
-
Jonathan Toppins authored
The problem was introduced in commit 506b0a39 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a39 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Sabrina Dubroca authored
Prior to the rework of PMTU information storage in commit 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA Ethernet fixes This patch set is addressing several issues in the DPAA Ethernet driver suite: - module unload crash caused by wrong reference to device being left in the cleanup code after the DSA related changes - scheduling wile atomic bug in QMan code revealed during dpaa_eth module unload - a couple of error counter fixes, a duplicated init in dpaa_eth. ==================== Signed-off-by: -
Camelia Groza authored
The tx_errors counter is incremented by the dpaa_xmit caller. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Camelia Groza authored
Signed-off-by:
-
Camelia Groza authored
The fd_format has already been initialized at this point. Signed-off-by:
-
Madalin Bucur authored
The recent changes that make the driver probing compatible with DSA were not propagated in the dpa_remove() function, breaking the module unload function. Using the proper device to address the issue. Signed-off-by:
-
Madalin Bucur authored
The wait_for_completion() call in qman_delete_cgr_safe() was triggering a scheduling while atomic bug, replacing the kthread with a smp_call_function_single() call to fix it. Signed-off-by:
Roy Pledge <roy.pledge@nxp.com> Signed-off-by:
-
Eric Dumazet authored
Andrei Vagin reported a KASAN: slab-out-of-bounds error in skb_update_prio() Since SYNACK might be attached to a request socket, we need to get back to the listener socket. Since this listener is manipulated without locks, add const qualifiers to sock_cgroup_prioidx() so that the const can also be used in skb_update_prio() Also add the const qualifier to sock_cgroup_classid() for consistency. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
-
Andri Yngvason authored
While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by:
Andri Yngvason <andri.yngvason@marel.com> Tested-by:
Richard Weinberger <richard@nod.at> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Andri Yngvason authored
This has been reported to cause stalls on rt-linux. Suggested-by:
-
- 13 Mar, 2018 4 commits
-
-
Dan Carpenter authored
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line before in qed_rdma_resc_free(p_hwfn). Fixes: 9de506a5 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-13 1) Refuse to insert 32 bit userspace socket policies on 64 bit systems like we do it for standard policies. We don't have a compat layer, so inserting socket policies from 32 bit userspace will lead to a broken configuration. 2) Make the policy hold queue work without the flowcache. Dummy bundles are not chached anymore, so we need to generate a new one on each lookup as long as the SAs are not yet in place. 3) Fix the validation of the esn replay attribute. The The sanity check in verify_replay() is bypassed if the XFRM_STATE_ESN flag is not set. Fix this by doing the sanity check uncoditionally. From Florian Westphal. 4) After most of the dst_entry garbage collection code is removed, we may leak xfrm_dst entries as they are neither cached nor tracked somewhere. Fix this by reusing the 'uncached_list' to track xfrm_dst entries too. From Xin Long. 5) Fix a rcu_read_lock/rcu_read_unlock imbalance in xfrm_get_tos() From Xin Long. 6) Fix an infinite loop in xfrm_get_dst_nexthop. On transport mode we fetch the child dst_entry after we continue, so this pointer is never updated. Fix this by fetching it before we continue. 7) Fix ESN sequence number gap after IPsec GSO packets. We accidentally increment the sequence number counter on the xfrm_state by one packet too much in the ESN case. Fix this by setting the sequence number to the correct value. 8) Reset the ethernet protocol after decapsulation only if a mac header was set. Otherwise it breaks configurations with TUN devices. From Yossi Kuperman. 9) Fix __this_cpu_read() usage in preemptible code. Use this_cpu_read() instead in ipcomp_alloc_tfms(). From Greg Hackmann. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Greg Hackmann authored
f7c83bcb ("net: xfrm: use __this_cpu_read per-cpu helper") added a __this_cpu_read() call inside ipcomp_alloc_tfms(). At the time, __this_cpu_read() required the caller to either not care about races or to handle preemption/interrupt issues. 3.15 tightened the rules around some per-cpu operations, and now __this_cpu_read() should never be used in a preemptible context. On 3.15 and later, we need to use this_cpu_read() instead. syzkaller reported this leading to the following kernel BUG while fuzzing sendmsg: BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101 caller is ipcomp_init_state+0x185/0x990 CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779 #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0xb9/0x115 check_preemption_disabled+0x1cb/0x1f0 ipcomp_init_state+0x185/0x990 ? __xfrm_init_state+0x876/0xc20 ? lock_downgrade+0x5e0/0x5e0 ipcomp4_init_state+0xaa/0x7c0 __xfrm_init_state+0x3eb/0xc20 xfrm_init_state+0x19/0x60 pfkey_add+0x20df/0x36f0 ? pfkey_broadcast+0x3dd/0x600 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_seq_stop+0x80/0x80 ? __skb_clone+0x236/0x750 ? kmem_cache_alloc+0x1f6/0x260 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_process+0x62a/0x6f0 pfkey_process+0x62a/0x6f0 ? pfkey_send_new_mapping+0x11c0/0x11c0 ? mutex_lock_io_nested+0x1390/0x1390 pfkey_sendmsg+0x383/0x750 ? dump_sp+0x430/0x430 sock_sendmsg+0xc0/0x100 ___sys_sendmsg+0x6c8/0x8b0 ? copy_msghdr_from_user+0x3b0/0x3b0 ? pagevec_lru_move_fn+0x144/0x1f0 ? find_held_lock+0x32/0x1c0 ? do_huge_pmd_anonymous_page+0xc43/0x11e0 ? lock_downgrade+0x5e0/0x5e0 ? get_kernel_page+0xb0/0xb0 ? _raw_spin_unlock+0x29/0x40 ? do_huge_pmd_anonymous_page+0x400/0x11e0 ? __handle_mm_fault+0x553/0x2460 ? __fget_light+0x163/0x1f0 ? __sys_sendmsg+0xc7/0x170 __sys_sendmsg+0xc7/0x170 ? SyS_shutdown+0x1a0/0x1a0 ? __do_page_fault+0x5a0/0xca0 ? lock_downgrade+0x5e0/0x5e0 SyS_sendmsg+0x27/0x40 ? __sys_sendmsg+0x170/0x170 do_syscall_64+0x19f/0x640 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f0ee73dfb79 RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79 RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004 RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0 R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440 R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Florian Fainelli authored
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ff ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 12 Mar, 2018 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-12 This series contains fixes to e1000e only. Benjamin Poirier provides two fixes, first reverts commits that changed what happens to the link status when there is an error. These commits were to resolve a race condition, but in the process of fixing the race condition, they changed the behavior when an error occurred. Second fix resolves a race condition by not setting "get_link_status" to false after checking the link. ==================== Signed-off-by: -
David S. Miller authored
Paolo Abeni says: ==================== l2tp: fix races with ipv4-mapped ipv6 addresses The syzbot reported an l2tp oops that uncovered some races in the l2tp xmit path and a partially related issue in the generic ipv6 code. We need to address them separately. v1 -> v2: - add missing fixes tag in patch 1 - fix several issues in patch 2 v2 -> v3: - dropped some unneeded chunks in patch 2 ==================== Reviewed-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Paolo Abeni authored
The l2tp_tunnel_create() function checks for v4mapped ipv6 sockets and cache that flag, so that l2tp core code can reusing it at xmit time. If the socket is provided by the userspace, the connection status of the tunnel sockets can change between the tunnel creation and the xmit call, so that syzbot is able to trigger the following splat: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192 [inline] BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448 CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 ip6_dst_idev include/net/ip6_fib.h:192 [inline] ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline] l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148 pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046 __sys_sendmsg+0xe5/0x210 net/socket.c:2080 SYSC_sendmsg net/socket.c:2091 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2087 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x453e69 RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69 RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000 This change addresses the issues: * explicitly checking for TCP_ESTABLISHED for user space provided sockets * dropping the v4mapped flag usage - it can become outdated - and explicitly invoking ipv6_addr_v4mapped() instead The issue is apparently there since ancient times. v1 -> v2: (many thanks to Guillaume) - with csum issue introduced in v1 - replace pr_err with pr_debug - fix build issue with IPV6 disabled - move l2tp_sk_is_v4mapped in l2tp_core.c v2 -> v3: - don't update inet_daddr for v4mapped address, unneeded - drop rendundant check at creation time Reported-and-tested-by: syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
On unsuccesful ip6_datagram_connect(), if the failure is caused by ip6_datagram_dst_update(), the sk peer information are cleared, but the sk->sk_state is preserved. If the socket was already in an established status, the overall sk status is inconsistent and fouls later checks in datagram code. Fix this saving the old peer information and restoring them in case of failure. This also aligns ipv6 datagram connect() behavior with ipv4. v1 -> v2: - added missing Fixes tag Fixes: 85cb73ff ("net: ipv6: reset daddr and dport in sk if connect() fails") Signed-off-by:
-
Benjamin Poirier authored
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Benjamin Poirier authored
This reverts commit 19110cfb. This reverts commit 4110e02e. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfb ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfb ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfb is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fixed hashtable representation doesn't support timeout flag, skip it otherwise rules to add elements from the packet fail bogusly fail with EOPNOTSUPP. 2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel, patch from Florian Westphal. 3) Sanitize proc names in several x_tables extensions, also from Florian. 4) Add sanitization to ebt_among wormhash logic, from Florian. 5) Missing release of hook array in flowtable. ====================
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.16-20180312' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-12 this is a pull reqeust of 6 patches for net/master. The first patch is by Wolfram Sang and fixes a bitshift vs. comparison mistake in the m_can driver. Two patches of Marek Vasut repair the error handling in the ifi driver. The two patches by Stephane Grosjean fix a "echo_skb is occupied!" bug in the peak/pcie_fd driver. Bich HEMON's patch adds pinctrl select state calls to the m_can's driver to further improve power saving during suspend. ==================== Signed-off-by:
-
Xin Long authored
Now when using 'ss' in iproute, kernel would try to load all _diag modules, which also causes corresponding family and proto modules to be loaded as well due to module dependencies. Like after running 'ss', sctp, dccp, af_packet (if it works as a module) would be loaded. For example: $ lsmod|grep sctp $ ss $ lsmod|grep sctp sctp_diag 16384 0 sctp 323584 5 sctp_diag inet_diag 24576 4 raw_diag,tcp_diag,sctp_diag,udp_diag libcrc32c 16384 3 nf_conntrack,nf_nat,sctp As these family and proto modules are loaded unintentionally, it could cause some problems, like: - Some debug tools use 'ss' to collect the socket info, which loads all those diag and family and protocol modules. It's noisy for identifying issues. - Users usually expect to drop sctp init packet silently when they have no sense of sctp protocol instead of sending abort back. - It wastes resources (especially with multiple netns), and SCTP module can't be unloaded once it's loaded. ... In short, it's really inappropriate to have these family and proto modules loaded unexpectedly when just doing debugging with inet_diag. This patch is to introduce sock_load_diag_module() where it loads the _diag module only when it's corresponding family or proto has been already registered. Note that we can't just load _diag module without the family or proto loaded, as some symbols used in _diag module are from the family or proto module. v1->v2: - move inet proto check to inet_diag to avoid a compiling err. v2->v3: - define sock_load_diag_module in sock.c and export one symbol only. - improve the changelog. Reported-by:Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. There are 3 bug fixes in this series to fix regressions recently introduced when adding the new ring reservations scheme. 2 minor fixes in the TC Flower code to return standard errno values and to elide some unnecessary warning dmesg. One Fixes the VLAN TCI value passed to the stack by including the entire 16-bit VLAN TCI, and the last fix is to check for valid VNIC ID before setting up or shutting down LRO/GRO. ==================== Signed-off-by: -
Michael Chan authored
During initialization, if we encounter errors, there is a code path that calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID. This may cause a warning in firmware logs. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
-
Venkat Duvvuru authored
bnxt_restore_pf_fw_resources routine frees PF resources by calling close_nic and allocates the resources back, by doing open_nic. However, this is not needed, if the PF is already in closed state. This bug causes the driver to call open the device and call request_irq() when it is not needed. Ultimately, pci_disable_msix() will crash when bnxt_en is unloaded. This patch fixes the problem by skipping __bnxt_close_nic and __bnxt_open_nic inside bnxt_restore_pf_fw_resources routine, if the interface is not running. Fixes: 80fcaf46 ("bnxt_en: Restore MSIX after disabling SRIOV.") Signed-off-by:
Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by:
-
Venkat Duvvuru authored
Currently, internal error value is returned by the driver, when hwrm_cfa_flow_alloc() fails due lack of resources. We should be returning Linux errno value -ENOSPC instead. This patch also converts other similar command errors to standard Linux errno code (-EIO) in bnxt_tc.c Fixes: db1d36a2 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by:
-
Michael Chan authored
Recent changes added the bnxt_init_int_mode() call in the driver's open path whenever ring reservations are changed. This call was previously only called in the probe path. In the open path, if MQPRIO TC has been setup, the bnxt_init_int_mode() call would reset and mess up the MQPRIO per TC rings. Fix it by not re-initilizing bp->tx_nr_rings_per_tc in bnxt_init_int_mode(). Instead, initialize it in the probe path only after the bnxt_init_int_mode() call. Fixes: 674f50a5 ("bnxt_en: Implement new method to reserve rings.") Signed-off-by:
-
Michael Chan authored
When receiving a packet with VLAN tag, pass the entire 16-bit TCI to the stack when calling __vlan_hwaccel_put_tag(). The current code is only passing the 12-bit tag and it is missing the priority bits. Signed-off-by:
-
Sriharsha Basavapatna authored
In some conditions when the driver fails to add a flow in HW and returns an error back to the stack, the stack continues to invoke get_flow_stats() and/or del_flow() on it. The driver fails these APIs with an error message "no flow_node for cookie". The message gets logged repeatedly as long as the stack keeps invoking these functions. Fix this by removing the corresponding netdev_info() calls from these functions. Fixes: d7bc7305 ("bnxt_en: add code to query TC flower offload stats") Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by:
-
Eddie Wai authored
The number of vnics to check must be determined ahead of time because only standard RX rings require vnics to support RFS. The logic is similar to the ring reservation logic and we can now use the refactored common functions to do most of the work in setting up the firmware message. Fixes: 8f23d638 ("bnxt_en: Expand bnxt_check_rings() to check all resources.") Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
-
Michael Chan authored
The bnxt_hwrm_reserve_{pf|vf}_rings() functions are very similar to the bnxt_hwrm_check_{pf|vf}_rings() functions. Refactor the former so that the latter can make use of common code in the next patch. Signed-off-by: -
Brad Mouring authored
In 664fcf12 (net: phy: Threaded interrupts allow some simplification) the phy_interrupt system was changed to use a traditional threaded interrupt scheme instead of a workqueue approach. With this change, the phy status check moved into phy_change, which did not report back to the caller whether or not the interrupt was handled. This means that, in the case of a shared phy interrupt, only the first phydev's interrupt registers are checked (since phy_interrupt() would always return IRQ_HANDLED). This leads to interrupt storms when it is a secondary device that's actually the interrupt source. Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Signed-off-by:
-
