- 25 May, 2020 40 commits
-
-
Filipe Manana authored
When we want to add checksums into the checksums tree, or a log tree, we try whenever possible to extend existing checksum items, as this helps reduce amount of metadata space used, since adding a new item uses extra metadata space for a btrfs_item structure (25 bytes). However we have two inefficiencies in the current approach: 1) After finding a checksum item that covers a range with an end offset that matches the start offset of the checksum range we want to insert, we release the search path populated by btrfs_lookup_csum() and then do another COW search on tree with the goal of getting additional space for at least one checksum. Doing this path release and then searching again is a waste of time because very often the leaf already has enough free space for at least one more checksum; 2) After the COW search that guarantees we get free space in the leaf for at least one more checksum, we end up not doing the extension of the previous checksum item, and fallback to insertion of a new checksum item, if the leaf doesn't have an amount of free space larger then the space required for 2 checksums plus one btrfs_item structure - this is pointless for two reasons: a) We want to extend an existing item, so we don't need to account for a btrfs_item structure (25 bytes); b) We made the COW search with an insertion size for 1 single checksum, so if the leaf ends up with a free space amount smaller then 2 checksums plus the size of a btrfs_item structure, we give up on the extension of the existing item and jump to the 'insert' label, where we end up releasing the path and then doing yet another search to insert a new checksum item for a single checksum. Fix these inefficiencies by doing the following: - For case 1), before releasing the path just check if the leaf already has enough space for at least 1 more checksum, and if it does, jump directly to the item extension code, with releasing our current path, which was already COWed by btrfs_lookup_csum(); - For case 2), fix the logic so that for item extension we require only that the leaf has enough free space for 1 checksum, and not a minimum of 2 checksums plus space for a btrfs_item structure. Signed-off-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
When we have extents shared amongst different inodes in the same subvolume, if we fsync them in parallel we can end up with checksum items in the log tree that represent ranges which overlap. For example, consider we have inodes A and B, both sharing an extent that covers the logical range from X to X + 64KiB: 1) Task A starts an fsync on inode A; 2) Task B starts an fsync on inode B; 3) Task A calls btrfs_csum_file_blocks(), and the first search in the log tree, through btrfs_lookup_csum(), returns -EFBIG because it finds an existing checksum item that covers the range from X - 64KiB to X; 4) Task A checks that the checksum item has not reached the maximum possible size (MAX_CSUM_ITEMS) and then releases the search path before it does another path search for insertion (through a direct call to btrfs_search_slot()); 5) As soon as task A releases the path and before it does the search for insertion, task B calls btrfs_csum_file_blocks() and gets -EFBIG too, because there is an existing checksum item that has an end offset that matches the start offset (X) of the checksum range we want to log; 6) Task B releases the path; 7) Task A does the path search for insertion (through btrfs_search_slot()) and then verifies that the checksum item that ends at offset X still exists and extends its size to insert the checksums for the range from X to X + 64KiB; 8) Task A releases the path and returns from btrfs_csum_file_blocks(), having inserted the checksums into an existing checksum item that got its size extended. At this point we have one checksum item in the log tree that covers the logical range from X - 64KiB to X + 64KiB; 9) Task B now does a search for insertion using btrfs_search_slot() too, but it finds that the previous checksum item no longer ends at the offset X, it now ends at an of offset X + 64KiB, so it leaves that item untouched. Then it releases the path and calls btrfs_insert_empty_item() that inserts a checksum item with a key offset corresponding to X and a size for inserting a single checksum (4 bytes in case of crc32c). Subsequent iterations end up extending this new checksum item so that it contains the checksums for the range from X to X + 64KiB. So after task B returns from btrfs_csum_file_blocks() we end up with two checksum items in the log tree that have overlapping ranges, one for the range from X - 64KiB to X + 64KiB, and another for the range from X to X + 64KiB. Having checksum items that represent ranges which overlap, regardless of being in the log tree or in the chekcsums tree, can lead to problems where checksums for a file range end up not being found. This type of problem has happened a few times in the past and the following commits fixed them and explain in detail why having checksum items with overlapping ranges is problematic: 27b9a812 "Btrfs: fix csum tree corruption, duplicate and outdated checksums" b84b8390 "Btrfs: fix file read corruption after extent cloning and fsync" 40e046ac "Btrfs: fix missing data checksums after replaying a log tree" Since this specific instance of the problem can only happen when logging inodes, because it is the only case where concurrent attempts to insert checksums for the same range can happen, fix the issue by using an extent io tree as a range lock to serialize checksum insertion during inode logging. This issue could often be reproduced by the test case generic/457 from fstests. When it happens it produces the following trace: BTRFS critical (device dm-0): corrupt leaf: root=18446744073709551610 block=30625792 slot=42, csum end range (15020032) goes beyond the start range (15015936) of the next csum item BTRFS info (device dm-0): leaf 30625792 gen 7 total ptrs 49 free space 2402 owner 18446744073709551610 BTRFS info (device dm-0): refs 1 lock (w:0 r:0 bw:0 br:0 sw:0 sr:0) lock_owner 0 current 15884 item 0 key (18446744073709551606 128 13979648) itemoff 3991 itemsize 4 item 1 key (18446744073709551606 128 13983744) itemoff 3987 itemsize 4 item 2 key (18446744073709551606 128 13987840) itemoff 3983 itemsize 4 item 3 key (18446744073709551606 128 13991936) itemoff 3979 itemsize 4 item 4 key (18446744073709551606 128 13996032) itemoff 3975 itemsize 4 item 5 key (18446744073709551606 128 14000128) itemoff 3971 itemsize 4 (...) BTRFS error (device dm-0): block=30625792 write time tree block corruption detected ------------[ cut here ]------------ WARNING: CPU: 1 PID: 15884 at fs/btrfs/disk-io.c:539 btree_csum_one_bio+0x268/0x2d0 [btrfs] Modules linked in: btrfs dm_thin_pool ... CPU: 1 PID: 15884 Comm: fsx Tainted: G W 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btree_csum_one_bio+0x268/0x2d0 [btrfs] Code: c7 c7 ... RSP: 0018:ffffbb0109e6f8e0 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffe1c0847b6080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffaa963988 RDI: 0000000000000001 RBP: ffff956a4f4d2000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000526 R11: 0000000000000000 R12: ffff956a5cd28bb0 R13: 0000000000000000 R14: ffff956a649c9388 R15: 000000011ed82000 FS: 00007fb419959e80(0000) GS:ffff956a7aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000fe6d54 CR3: 0000000138696005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btree_submit_bio_hook+0x67/0xc0 [btrfs] submit_one_bio+0x31/0x50 [btrfs] btree_write_cache_pages+0x2db/0x4b0 [btrfs] ? __filemap_fdatawrite_range+0xb1/0x110 do_writepages+0x23/0x80 __filemap_fdatawrite_range+0xd2/0x110 btrfs_write_marked_extents+0x15e/0x180 [btrfs] btrfs_sync_log+0x206/0x10a0 [btrfs] ? kmem_cache_free+0x315/0x3b0 ? btrfs_log_inode+0x1e8/0xf90 [btrfs] ? __mutex_unlock_slowpath+0x45/0x2a0 ? lockref_put_or_lock+0x9/0x30 ? dput+0x2d/0x580 ? dput+0xb5/0x580 ? btrfs_sync_file+0x464/0x4d0 [btrfs] btrfs_sync_file+0x464/0x4d0 [btrfs] do_fsync+0x38/0x60 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb41953a6d0 Code: 48 3d ... RSP: 002b:00007ffcc86bd218 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fb41953a6d0 RDX: 0000000000000009 RSI: 0000000000040000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000001 R09: 0000000000000009 R10: 0000000000000064 R11: 0000000000000246 R12: 0000556cf4b2c060 R13: 0000000000000100 R14: 0000000000000000 R15: 0000556cf322b420 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffffa96bdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace d543fc76f5ad7fd8 ]--- In that trace the tree checker detected the overlapping checksum items at the time when we triggered writeback for the log tree when syncing the log. Another trace that can happen is due to BUG_ON() when deleting checksum items while logging an inode: BTRFS critical (device dm-0): slot 81 key (18446744073709551606 128 13635584) new key (18446744073709551606 128 13635584) BTRFS info (device dm-0): leaf 30949376 gen 7 total ptrs 98 free space 8527 owner 18446744073709551610 BTRFS info (device dm-0): refs 4 lock (w:1 r:0 bw:0 br:0 sw:1 sr:0) lock_owner 13473 current 13473 item 0 key (257 1 0) itemoff 16123 itemsize 160 inode generation 7 size 262144 mode 100600 item 1 key (257 12 256) itemoff 16103 itemsize 20 item 2 key (257 108 0) itemoff 16050 itemsize 53 extent data disk bytenr 13631488 nr 4096 extent data offset 0 nr 131072 ram 131072 (...) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:3153! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 1 PID: 13473 Comm: fsx Not tainted 5.6.0-rc7-btrfs-next-58 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x1ea/0x270 [btrfs] Code: 0f b6 ... RSP: 0018:ffff95e3889179d0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000051 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb7763988 RDI: 0000000000000001 RBP: fffffffffffffff6 R08: 0000000000000000 R09: 0000000000000001 R10: 00000000000009ef R11: 0000000000000000 R12: ffff8912a8ba5a08 R13: ffff95e388917a06 R14: ffff89138dcf68c8 R15: ffff95e388917ace FS: 00007fe587084e80(0000) GS:ffff8913baa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe587091000 CR3: 0000000126dac005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_del_csums+0x2f4/0x540 [btrfs] copy_items+0x4b5/0x560 [btrfs] btrfs_log_inode+0x910/0xf90 [btrfs] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs] ? dget_parent+0x5/0x370 btrfs_log_dentry_safe+0x4a/0x70 [btrfs] btrfs_sync_file+0x42b/0x4d0 [btrfs] __x64_sys_msync+0x199/0x200 do_syscall_64+0x5c/0x280 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fe586c65760 Code: 00 f7 ... RSP: 002b:00007ffe250f98b8 EFLAGS: 00000246 ORIG_RAX: 000000000000001a RAX: ffffffffffffffda RBX: 00000000000040e1 RCX: 00007fe586c65760 RDX: 0000000000000004 RSI: 0000000000006b51 RDI: 00007fe58708b000 RBP: 0000000000006a70 R08: 0000000000000003 R09: 00007fe58700cb61 R10: 0000000000000100 R11: 0000000000000246 R12: 00000000000000e1 R13: 00007fe58708b000 R14: 0000000000006b51 R15: 0000558de021a420 Modules linked in: dm_log_writes ... ---[ end trace c92a7f447a8515f5 ]--- CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
-
Anand Jain authored
btrfs_compress_set_level() can be static function in the file compression.c. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
David Sterba authored
The inode lookup starting at btrfs_iget takes the full location key, while only the objectid is used to match the inode, because the lookup happens inside the given root thus the inode number is unique. The entire location key is properly set up in btrfs_init_locked_inode. Simplify the helpers and pass only inode number, renaming it to 'ino' instead of 'objectid'. This allows to remove temporary variables key, saving some stack space. Signed-off-by: -
David Sterba authored
After the update to btrfs_get_fs_root, read_fs_root has become trivial wrapper that can be open coded. Signed-off-by: -
David Sterba authored
The main function to lookup a root by its id btrfs_get_fs_root takes the whole key, while only using the objectid. The value of offset is preset to (u64)-1 but not actually used until btrfs_find_root that does the actual search. Switch btrfs_get_fs_root to use only objectid and remove all local variables that existed just for the lookup. The actual key for search is set up in btrfs_get_fs_root, reusing another key variable. Signed-off-by: -
Qu Wenruo authored
[BUG] There are several reported runaway balance, that balance is flooding the log with "found X extents" where the X never changes. [CAUSE] Commit d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") introduced BTRFS_ROOT_DEAD_RELOC_TREE bit to indicate that one subvolume has finished its tree blocks swap with its reloc tree. However if balance is canceled or hits ENOSPC halfway, we didn't clear the BTRFS_ROOT_DEAD_RELOC_TREE bit, leaving that bit hanging forever until unmount. Any subvolume root with that bit, would cause backref cache to skip this tree block, as it has finished its tree block swap. This would cause all tree blocks of that root be ignored by balance, leading to runaway balance. [FIX] Fix the problem by also clearing the BTRFS_ROOT_DEAD_RELOC_TREE bit for the original subvolume of orphan reloc root. Add an umount check for the stale bit still set. Fixes: d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Qu Wenruo authored
[BUG] When balance is canceled, there is a pretty high chance that unmounting the fs can lead to lead the NULL pointer dereference: BTRFS warning (device dm-3): page private not zero on page 223158272 ... BTRFS warning (device dm-3): page private not zero on page 223162368 BTRFS error (device dm-3): leaked root 18446744073709551608-304 refcount 1 BUG: kernel NULL pointer dereference, address: 0000000000000168 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 5793 Comm: umount Tainted: G O 5.7.0-rc5-custom+ #53 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__lock_acquire+0x5dc/0x24c0 Call Trace: lock_acquire+0xab/0x390 _raw_spin_lock+0x39/0x80 btrfs_release_extent_buffer_pages+0xd7/0x200 [btrfs] release_extent_buffer+0xb2/0x170 [btrfs] free_extent_buffer+0x66/0xb0 [btrfs] btrfs_put_root+0x8e/0x130 [btrfs] btrfs_check_leaked_roots.cold+0x5/0x5d [btrfs] btrfs_free_fs_info+0xe5/0x120 [btrfs] btrfs_kill_super+0x1f/0x30 [btrfs] deactivate_locked_super+0x3b/0x80 deactivate_super+0x3e/0x50 cleanup_mnt+0x109/0x160 __cleanup_mnt+0x12/0x20 task_work_run+0x67/0xa0 exit_to_usermode_loop+0xc5/0xd0 syscall_return_slowpath+0x205/0x360 do_syscall_64+0x6e/0xb0 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fd028ef740b [CAUSE] When balance is canceled, all reloc roots are marked as orphan, and orphan reloc roots are going to be cleaned up. However for orphan reloc roots and merged reloc roots, their lifespan are quite different: Merged reloc roots | Orphan reloc roots by cancel -------------------------------------------------------------------- create_reloc_root() | create_reloc_root() |- refs == 1 | |- refs == 1 | btrfs_grab_root(reloc_root); | btrfs_grab_root(reloc_root); |- refs == 2 | |- refs == 2 | root->reloc_root = reloc_root; | root->reloc_root = reloc_root; >>> No difference so far <<< | prepare_to_merge() | prepare_to_merge() |- btrfs_set_root_refs(item, 1);| |- if (!err) (err == -EINTR) | merge_reloc_roots() | merge_reloc_roots() |- merge_reloc_root() | |- Doing nothing to put reloc root |- insert_dirty_subvol() | |- refs == 2 |- __del_reloc_root() | |- btrfs_put_root() | |- refs == 1 | >>> Now orphan reloc roots still have refs 2 <<< | clean_dirty_subvols() | clean_dirty_subvols() |- btrfs_drop_snapshot() | |- btrfS_drop_snapshot() |- reloc_root get freed | |- reloc_root still has refs 2 | related ebs get freed, but | reloc_root still recorded in | allocated_roots btrfs_check_leaked_roots() | btrfs_check_leaked_roots() |- No leaked roots | |- Leaked reloc_roots detected | |- btrfs_put_root() | |- free_extent_buffer(root->node); | |- eb already freed, caused NULL | pointer dereference [FIX] The fix is to clear fs_root->reloc_root and put it at merge_reloc_roots() time, so that we won't leak reloc roots. Fixes: d2311e69 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: stable@vger.kernel.org # 5.1+ Tested-by: -
Robbie Ko authored
When creating a snapshot, ordered extents need to be flushed and this can take a long time. In create_snapshot there are two locks held when this happens: 1. Destination directory inode lock 2. Global subvolume semaphore This will unnecessarily block other operations like subvolume destroy, create, or setflag until the snapshot is created. We can fix that by moving the flush outside the locked section as this does not depend on the aforementioned locks. The code factors out the snapshot related work from create_snapshot to btrfs_mksnapshot. __btrfs_ioctl_snap_create btrfs_mksubvol create_subvol btrfs_mksnapshot <flush> btrfs_mksubvol create_snapshot Reviewed-by:Robbie Ko <robbieko@synology.com> Reviewed-by:
-
Qu Wenruo authored
SHAREABLE flag is set for subvolumes because users can create snapshot for subvolumes, thus sharing tree blocks of them. But data reloc tree is not exposed to user space, as it's only an internal tree for data relocation, thus it doesn't need the full path replacement handling at all. This patch will make data reloc tree a non-shareable tree, and add btrfs_fs_info::data_reloc_root for data reloc tree, so relocation code can grab it from fs_info directly. This would slightly improve tree relocation, as now data reloc tree can go through regular COW routine to get relocated, without bothering the complex tree reloc tree routine. Signed-off-by:
-
Qu Wenruo authored
There are a lot of root owner checks in btrfs_truncate_inode_items() like: if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) || root == fs_info->tree_root) But considering that, only these trees can have INODE_ITEMs: - tree root (for v1 space cache) - subvolume trees - tree reloc trees - data reloc tree - log trees And since subvolume/tree reloc/data reloc trees all have SHAREABLE bit, and we're checking tree root manually, so above check is just excluding log trees. This patch will replace two of such checks to a simpler one: if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) This would merge btrfs_drop_extent_cache() and lock_extent_bits() call into the same if branch. Signed-off-by:
-
Qu Wenruo authored
The name BTRFS_ROOT_REF_COWS is not very clear about the meaning. In fact, that bit can only be set to those trees: - Subvolume roots - Data reloc root - Reloc roots for above roots All other trees won't get this bit set. So just by the result, it is obvious that, roots with this bit set can have tree blocks shared with other trees. Either shared by snapshots, or by reloc roots (an special snapshot created by relocation). This patch will rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE to make it easier to understand, and update all comment mentioning "reference counted" to follow the rename. Signed-off-by:
-
Anand Jain authored
Commit dccdb07b ("btrfs: kill btrfs_fs_info::volume_mutex") removed the last use of the volume_mutex, forgetting to update the comment. Signed-off-by:
-
David Sterba authored
Signed-off-by: -
David Sterba authored
The fallback path calls helper write_extent_buffer to do write of the data spanning two extent buffer pages. As the size is known, we can do the write directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. The cached token address is set to the second page. Reviewed-by:
-
David Sterba authored
The helper write_extent_buffer is called to do write of the data spanning two extent buffer pages. As the size is known, we can do the write directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. Reviewed-by:
-
David Sterba authored
The fallback path calls helper read_extent_buffer to do read of the data spanning two extent buffer pages. As the size is known, we can do the read directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. The cached token address is set to the second page. Reviewed-by:
-
David Sterba authored
The helper read_extent_buffer is called to do read of the data spanning two extent buffer pages. As the size is known, we can do the read directly in two steps. This removes one function call and compiler can optimize memcpy as the sizes are known at compile time. Reviewed-by:
-
David Sterba authored
Helpers that iterate over extent buffer pages set up several variables, one of them is finding out offset of the extent buffer start within a page. Right now we have extent buffers aligned to page sizes so this is effectively storing zero. This makes the code harder the follow and can be simplified. The same change is done in all the helpers: * remove: size_t start_offset = offset_in_page(eb->start); * simplify code using start_offset Reviewed-by:
-
David Sterba authored
There are many helpers around extent buffers, found in extent_io.h and ctree.h. Most of them can be converted to take constified eb as there are no changes to the extent buffer structure itself but rather the pages. Reviewed-by:
-
David Sterba authored
All uses of map_private_extent_buffer have been replaced by more effective way. The set/get helpers have their own bounds checker. The function name was confusing since the non-private helper was removed in a6591715 ("Btrfs: stop using highmem for extent_buffers") many years ago. Reviewed-by:
-
David Sterba authored
The bin search jumps over the extent buffer item keys, comparing directly the bytes if the key is in one page, or storing it in a temporary buffer in case it spans two pages. The mapping start and length are obtained from map_private_extent_buffer, which is heavy weight compared to what we need. We know the key size and can find out the eb page in a simple way. For keys spanning two pages the fallback read_extent_buffer is used. The temporary variables are reduced and moved to the scope of use. Reviewed-by:
-
David Sterba authored
The set/get token helpers either use the cached address in the token or unconditionally call map_private_extent_buffer to get the address of page containing the requested offset plus the mapping start and length. Depending on the return value, the fast path uses unaligned put to write data within a page, or fall back to write_extent_buffer that can handle writes spanning more pages. This is all wasteful. We know the number of bytes to write, 1/2/4/8 and can find out the page. Then simply check if it's contained or the fallback is needed. The token address is updated to the page, or the on the next index, expecting that the next write will use that. This saves one function call to map_private_extent_buffer and several unnecessary temporary variables. Reviewed-by:
-
David Sterba authored
The helpers unconditionally call map_private_extent_buffer to get the address of page containing the requested offset plus the mapping start and length. Depending on the return value, the fast path uses unaligned put to write data within a page, or fall back to write_extent_buffer that can handle writes spanning more pages. This is all wasteful. We know the number of bytes to write, 1/2/4/8 and can find out the page. Then simply check if it's contained or the fallback is needed. This saves one function call to map_private_extent_buffer and several unnecessary temporary variables. Reviewed-by:
-
David Sterba authored
The set/get token helpers either use the cached address in the token or unconditionally call map_private_extent_buffer to get the address of page containing the requested offset plus the mapping start and length. Depending on the return value, the fast path uses unaligned read to get data within a page, or fall back to read_extent_buffer that can handle reads spanning more pages. This is all wasteful. We know the number of bytes to read, 1/2/4/8 and can find out the page. Then simply check if it's contained or the fallback is needed. The token address is updated to the page, or the on the next index, expecting that the next read will use that. This saves one function call to map_private_extent_buffer and several unnecessary temporary variables. Reviewed-by:
-
David Sterba authored
The helpers unconditionally call map_private_extent_buffer to get the address of page containing the requested offset plus the mapping start and length. Depending on the return value, the fast path uses unaligned read to get data within a page, or fall back to read_extent_buffer that can handle reads spanning more pages. This is all wasteful. We know the number of bytes to read, 1/2/4/8 and can find out the page. Then simply check if it's contained or the fallback is needed. This saves one function call to map_private_extent_buffer and several unnecessary temporary variables. Reviewed-by:
-
David Sterba authored
The bounds checking is now done in map_private_extent_buffer but that will be removed in following patches and some sanity checks should still be done. There are two separate checks to see the kind of out of bounds access: partial (start offset is in the buffer) or complete (both start and end are out). Reviewed-by:
-
David Sterba authored
All the set/get helpers first check if the token contains a cached address. After first use the address is always valid, but the extra check is done for each call. The token initialization can optimistically set it to the first extent buffer page, that we know always exists. Then the condition in all btrfs_token_*/btrfs_set_token_* can be simplified by removing the address check from the condition, but for development the assertion still makes sure it's valid. Reviewed-by:
-
David Sterba authored
The token is supposed to cache the last page used by the set/get helpers. In leaf_space_used the first and last items are accessed, it's not likely they'd be on the same page so there's some overhead caused updating the token address but not using it. Reviewed-by:
-
David Sterba authored
The set/get token is supposed to cache the last page that was accessed so it speeds up subsequential access to the eb. It does not make sense to use that for just one change, which is the case of inode size in overwrite_item. Reviewed-by:
-
David Sterba authored
Now that all set/get helpers use the eb from the token, we don't need to pass it to many btrfs_token_*/btrfs_set_token_* helpers, saving some stack space. Reviewed-by:
-
David Sterba authored
The token stores a copy of the extent buffer pointer but does not make any use of it besides sanity checks. We can use it and drop the eb parameter from several functions, this patch only switches the use inside the set/get helpers. Reviewed-by:
-
Tiezhu Yang authored
disk-io.h is included more than once in block-group.c, remove it. Reviewed-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
-
Qu Wenruo authored
The name of this function contains the word "cache", which is left from the times where btrfs_block_group was called btrfs_block_group_cache. Now this "cache" doesn't match anything, and we have better namings for functions like read/insert/remove_block_group_item(). Rename it to update_block_group_item(). Reviewed-by:
-
Qu Wenruo authored
Currently the block group item insert is pretty straight forward, fill the block group item structure and insert it into extent tree. However the incoming skinny block group feature is going to change this, so this patch will refactor insertion into a new function, insert_block_group_item(), to make the incoming feature easier to add. Reviewed-by:
-
Qu Wenruo authored
When deleting a block group item, it's pretty straight forward, just delete the item pointed by the key. However it will not be that straight-forward for incoming skinny block group item. So refactor the block group item deletion into a new function, remove_block_group_item(), also to make the already lengthy btrfs_remove_block_group() a little shorter. Reviewed-by:
-
Qu Wenruo authored
Structure btrfs_block_group has the following members which are currently read from on-disk block group item and key: - length - from item key - used - flags - from block group item However for incoming skinny block group tree, we are going to read those members from different sources. This patch will refactor such read by: - Don't initialize btrfs_block_group::length at allocation Caller should initialize them manually. Also to avoid possible (well, only two callers) missing initialization, add extra ASSERT() in btrfs_add_block_group_cache(). - Refactor length/used/flags initialization into one function The new function, fill_one_block_group() will handle the initialization of such members. - Use btrfs_block_group::length to replace key::offset Since skinny block group item would have a different meaning for its key offset. Signed-off-by:
-
Qu Wenruo authored
Regular block group items in extent tree are scattered inside the huge tree, thus forward readahead makes no sense. Signed-off-by:
-
Marcos Paulo de Souza authored
Whenever a chown is executed, all capabilities of the file being touched are lost. When doing incremental send with a file with capabilities, there is a situation where the capability can be lost on the receiving side. The sequence of actions bellow shows the problem: $ mount /dev/sda fs1 $ mount /dev/sdb fs2 $ touch fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_init $ btrfs send fs1/snap_init | btrfs receive fs2 $ chgrp adm fs1/foo.bar $ setcap cap_sys_nice+ep fs1/foo.bar $ btrfs subvolume snapshot -r fs1 fs1/snap_complete $ btrfs subvolume snapshot -r fs1 fs1/snap_incremental $ btrfs send fs1/snap_complete | btrfs receive fs2 $ btrfs send -p fs1/snap_init fs1/snap_incremental | btrfs receive fs2 At this point, only a chown was emitted by "btrfs send" since only the group was changed. This makes the cap_sys_nice capability to be dropped from fs2/snap_incremental/foo.bar To fix that, only emit capabilities after chown is emitted. The current code first checks for xattrs that are new/changed, emits them, and later emit the chown. Now, __process_new_xattr skips capabilities, letting only finish_inode_if_needed to emit them, if they exist, for the inode being processed. This behavior was being worked around in "btrfs receive" side by caching the capability and only applying it after chown. Now, xattrs are only emmited _after_ chown, making that workaround not needed anymore. Link: https://github.com/kdave/btrfs-progs/issues/202 CC: stable@vger.kernel.org # 4.4+ Suggested-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by:
-
Filipe Manana authored
When scrubbing a stripe, whenever we find an extent we lookup for its checksums in the checksum tree. However we do it even for metadata extents which don't have checksum items stored in the checksum tree, that is only for data extents. So make the lookup for checksums only if we are processing with a data extent. Signed-off-by:
-
