- 09 Dec, 2020 1 commit
-
-
Zhang Changzhong authored
platform_get_resource() may fail and in this case a NULL dereference will occur. Fix it to use devm_platform_ioremap_resource() instead of calling platform_get_resource() and devm_ioremap(). This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 08 Dec, 2020 14 commits
-
-
Cengiz Can authored
`tipc_node_apply_property` does a null check on a `tipc_link_entry` pointer but also accesses the same pointer out of the null check block. This triggers a warning on Coverity Static Analyzer because we're implying that `e->link` can BE null. Move "Update MTU for node link entry" line into if block to make sure that we're not in a state that `e->link` is null. Signed-off-by:
Cengiz Can <cengiz@kernel.wtf> Signed-off-by:
-
David S. Miller authored
Joakim Zhang says: ==================== patches for stmmac A patch set for stmmac, fix some driver issues. ChangeLogs: V1->V2: * add Fixes tag. * add patch 5/5 into this patch set. V2->V3: * rebase to latest net tree where fixes go. ==================== Signed-off-by: -
Fugang Duan authored
The current IP register MAC_HW_Feature1[ADDR64] only defines 32/40/64 bit width, but some SOCs support others like i.MX8MP support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64]. So overwrite dma_cap.addr64 according to HW real design. Fixes: 94abdad6 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Fugang Duan authored
There have chance to re-enable the eee_ctrl_timer and fire the timer in napi callback after delete the timer in .stmmac_release(), which introduces to access eee registers in the timer function after clocks are disabled then causes system hang. Found this issue when do suspend/resume and reboot stress test. It is safe to delete the timer after napi disabled and disable lpi mode. Fixes: d765955d ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by:
-
Fugang Duan authored
When do suspend/resume test, there have WARN_ON() log dump from stmmac_xmit() funciton, the code logic: entry = tx_q->cur_tx; first_entry = entry; WARN_ON(tx_q->tx_skbuff[first_entry]); In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because the skb should be handled and freed in stmmac_tx_clean(). But stmmac_resume() reset queue parameters like below, skb buffers may not be freed. tx_q->cur_tx = 0; tx_q->dirty_tx = 0; So free tx skb buffer in stmmac_resume() to avoid warning and memory leak. log: [ 46.139824] ------------[ cut here ]------------ [ 46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0 [ 46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev [ 46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.24-2.1.0+g2ad925d15481 #1 [ 46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 46.180465] pc : stmmac_xmit+0x7a0/0x9d0 [ 46.184387] lr : dev_hard_start_xmit+0x94/0x158 [ 46.188913] sp : ffff800010003cc0 [ 46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100 [ 46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090 [ 46.202842] x25: 0000000000000000 x24: 0000000000000000 [ 46.208151] x23: 0000000000000003 x22: ffff8000119ddd30 [ 46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0 [ 46.218769] x19: 0000000000000003 x18: 0000000000000000 [ 46.224078] x17: 0000000000000000 x16: 0000000000000000 [ 46.229386] x15: 0000000000000079 x14: 0000000000000000 [ 46.234695] x13: 0000000000000003 x12: 0000000000000003 [ 46.240003] x11: 0000000000000010 x10: 0000000000000010 [ 46.245312] x9 : ffff00017002b140 x8 : 0000000000000000 [ 46.250621] x7 : ffff00017636f000 x6 : 0000000000000010 [ 46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000 [ 46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff [ 46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000 [ 46.271856] Call trace: [ 46.274302] stmmac_xmit+0x7a0/0x9d0 [ 46.277874] dev_hard_start_xmit+0x94/0x158 [ 46.282056] sch_direct_xmit+0x11c/0x338 [ 46.285976] __qdisc_run+0x118/0x5f0 [ 46.289549] net_tx_action+0x110/0x198 [ 46.293297] __do_softirq+0x120/0x23c [ 46.296958] irq_exit+0xb8/0xd8 [ 46.300098] __handle_domain_irq+0x64/0xb8 [ 46.304191] gic_handle_irq+0x5c/0x148 [ 46.307936] el1_irq+0xb8/0x180 [ 46.311076] cpuidle_enter_state+0x84/0x360 [ 46.315256] cpuidle_enter+0x34/0x48 [ 46.318829] call_cpuidle+0x18/0x38 [ 46.322314] do_idle+0x1e0/0x280 [ 46.325539] cpu_startup_entry+0x24/0x40 [ 46.329460] rest_init+0xd4/0xe0 [ 46.332687] arch_call_rest_init+0xc/0x14 [ 46.336695] start_kernel+0x420/0x44c [ 46.340353] ---[ end trace bc1ee695123cbacd ]--- Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by:
-
Fugang Duan authored
Start phylink instance and resume back the PHY to supply RX clock to MAC before MAC layer initialization by calling .stmmac_hw_setup(), since DMA reset depends on the RX clock, otherwise DMA reset cost maximum timeout value then finally timeout. Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by:
-
Fugang Duan authored
Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by:
-
Jarod Wilson authored
Don't try to adjust XFRM support flags if the bond device isn't yet registered. Bad things can currently happen when netdev_change_features() is called without having wanted_features fully filled in yet. This code runs both on post-module-load mode changes, as well as at module init time, and when run at module init time, it is before register_netdevice() has been called and filled in wanted_features. The empty wanted_features led to features also getting emptied out, which was definitely not the intended behavior, so prevent that from happening. Originally, I'd hoped to stop adjusting wanted_features at all in the bonding driver, as it's documented as being something only the network core should touch, but we actually do need to do this to properly update both the features and wanted_features fields when changing the bond type, or we get to a situation where ethtool sees: esp-hw-offload: off [requested on] I do think we should be using netdev_update_features instead of netdev_change_features here though, so we only send notifiers when the features actually changed. Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load") Reported-by:Ivan Vecera <ivecera@redhat.com> Suggested-by:
Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net): ipsec 2020-12-07 1) Sysbot reported fixes for the new 64/32 bit compat layer. From Dmitry Safonov. 2) Fix a memory leak in xfrm_user_policy that was introduced by adding the 64/32 bit compat layer. From Yu Kuai. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: net: xfrm: fix memory leak in xfrm_user_policy() xfrm/compat: Don't allocate memory with __GFP_ZERO xfrm/compat: memset(0) 64-bit padding at right place xfrm/compat: Translate by copying XFRMA_UNSPEC attribute ==================== Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.comSigned-off-by:
-
Martin Blumenstingl authored
The m250_sel mux clock uses bit 4 in the PRG_ETH0 register. Fix this by shifting the PRG_ETH0_CLK_M250_SEL_MASK accordingly as the "mask" in struct clk_mux expects the mask relative to the "shift" field in the same struct. While here, get rid of the PRG_ETH0_CLK_M250_SEL_SHIFT macro and use __ffs() to determine it from the existing PRG_ETH0_CLK_M250_SEL_MASK macro. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201205213207.519341-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Christophe JAILLET authored
Add an 'of_node_put()' call when a tested device node is not available. Fixes: 94ae899b ("dpaa2-mac: add PCS support through the Lynx module") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201206151339.44306-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Jianguo Wu authored
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]# This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL, so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'. After this patch: [root@localhost ~]# cat /proc/net/netstat ... MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0 [root@localhost ~]# Fixes: fc518953 ("mptcp: add and use MIB counter infrastructure") Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Acked-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.comSigned-off-by:
-
Joseph Huang authored
When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c ("bridge: join all-snoopers multicast address") Signed-off-by:
Joseph Huang <Joseph.Huang@garmin.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.comSigned-off-by:
-
Claudiu Manoil authored
Noticed some inconsistencies in packet statistics reporting. This patch adds the missing Tx packet counter registers to ethtool reporting and fixes the information strings for a few of them. Fixes: 16eb4c85 ("enetc: Add ethtool statistics") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204171505.21389-1-claudiu.manoil@nxp.comSigned-off-by:
-
- 07 Dec, 2020 2 commits
-
-
Xin Long authored
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu(). Otherwize, with a negtive value passed, it will underflow inet_protos. This can be reproduced with IPIP FOU: # ip fou add port 5555 ipproto 4 # ethtool -K eth1 rx-gro-list on Fixes: cf329aa4 ("udp: cope with UDP GRO packet misdirection") Reported-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Huazhong Tan authored
hclge_dbg_reg_info[] is defined as an array of packed structure accidentally. However, this array contains pointers, which are no longer aligned naturally, and cannot be relocated on PPC64. Hence, when compile-testing this driver on PPC64 with CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), there will be some warnings. Since each field in structure hclge_qos_pri_map_cmd and hclge_dbg_bitmap_cmd is type u8, the pragma packed is unnecessary for these two structures as well, so remove the pragma packed in hclge_debugfs.h to fix this issue, and this increases hclge_dbg_reg_info[] by 4 bytes per entry. Fixes: a582b78d ("net: hns3: code optimization for debugfs related to "dump reg"") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
- 05 Dec, 2020 6 commits
-
-
Vladimir Oltean authored
The current assumption is that the felix DSA driver has flooding knobs per traffic class, while ocelot switchdev has a single flooding knob. This was correct for felix VSC9959 and ocelot VSC7514, but with the introduction of seville VSC9953, we see a switch driven by felix.c which has a single flooding knob. So it is clear that we must do what should have been done from the beginning, which is not to overwrite the configuration done by ocelot.c in felix, but instead to teach the common ocelot library about the differences in our switches, and set up the flooding PGIDs centrally. The effect that the bogus iteration through FELIX_NUM_TC has upon seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will actually overwrite ANA_FLOODING_IPMC when attempting to write ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING. And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D: MC6_DATA = 61, MC6_CTRL = 61, MC4_DATA = 60, MC4_CTRL = 0. Because MC4_CTRL is zero, this means that IPv4 multicast control packets are not flooded, but dropped. An invalid configuration, and this is how the issue was actually spotted. Reported-by:
Eldar Gasanov <eldargasanov2@gmail.com> Reported-by:
Maxim Kochetkov <fido_max@inbox.ru> Tested-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Stephen Suryaputra authored
Depending on the order of the routes to fe80::/64 are installed on the VRF table, the NS for the source link-local address of the originator might be sent to the wrong interface. This patch ensures that packets with link-local addr source is doing a lookup with the orig_iif when the destination addr indicates that it is strict. Add the reproducer as a use case in self test script fcnal-test.sh. Fixes: b4869aa2 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.comSigned-off-by:
-
Zhang Qilong authored
If softing_netdev_open() fails, we should call close_candev() to avoid reference leak. Fixes: 03fd3cf5 ("can: add driver for Softing card") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Acked-by:
Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/r/20201202151632.1343786-1-zhangqilong3@huawei.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-2-mkl@pengutronix.deSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_IPV6 is disabled, clang complains that a variable is uninitialized for non-IPv4 data: drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1046:6: error: variable 'cntrl1' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (tx_info->ip_family == AF_INET) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:1059:2: note: uninitialized use occurs here cntrl1 |= T6_TXPKT_ETHHDR_LEN_V(maclen - ETH_HLEN) | ^~~~~~ Replace the preprocessor conditional with the corresponding C version, and make the ipv4 case unconditional in this configuration to improve readability and avoid the warning. Fixes: 86716b51 ("ch_ktls: Update cheksum information") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203222641.964234-1-arnd@kernel.orgSigned-off-by:
-
Eric Dumazet authored
If tbl_mpp can not be allocated, we call mesh_table_free(tbl_path) while tbl_path rhashtable has not yet been initialized, which causes panics. Simply factorize the rhashtable_init() call into mesh_table_alloc() WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __flush_work kernel/workqueue.c:3040 [inline] WARNING: CPU: 1 PID: 8474 at kernel/workqueue.c:3040 __cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136 Modules linked in: CPU: 1 PID: 8474 Comm: syz-executor663 Not tainted 5.10.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__flush_work kernel/workqueue.c:3040 [inline] RIP: 0010:__cancel_work_timer+0x514/0x540 kernel/workqueue.c:3136 Code: 5d c3 e8 bf ae 29 00 0f 0b e9 f0 fd ff ff e8 b3 ae 29 00 0f 0b 43 80 3c 3e 00 0f 85 31 ff ff ff e9 34 ff ff ff e8 9c ae 29 00 <0f> 0b e9 dc fe ff ff 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 7d fd ff RSP: 0018:ffffc9000165f5a0 EFLAGS: 00010293 RAX: ffffffff814b7064 RBX: 0000000000000001 RCX: ffff888021c80000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888024039ca0 R08: dffffc0000000000 R09: fffffbfff1dd3e64 R10: fffffbfff1dd3e64 R11: 0000000000000000 R12: 1ffff920002cbebd R13: ffff888024039c88 R14: 1ffff11004807391 R15: dffffc0000000000 FS: 0000000001347880(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000002cc0a000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rhashtable_free_and_destroy+0x25/0x9c0 lib/rhashtable.c:1137 mesh_table_free net/mac80211/mesh_pathtbl.c:69 [inline] mesh_pathtbl_init+0x287/0x2e0 net/mac80211/mesh_pathtbl.c:785 ieee80211_mesh_init_sdata+0x2ee/0x530 net/mac80211/mesh.c:1591 ieee80211_setup_sdata+0x733/0xc40 net/mac80211/iface.c:1569 ieee80211_if_add+0xd5c/0x1cd0 net/mac80211/iface.c:1987 ieee80211_add_iface+0x59/0x130 net/mac80211/cfg.c:125 rdev_add_virtual_intf net/wireless/rdev-ops.h:45 [inline] nl80211_new_interface+0x563/0xb40 net/wireless/nl80211.c:3855 genl_family_rcv_msg_doit net/netlink/genetlink.c:739 [inline] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0xe4e/0x1280 net/netlink/genetlink.c:800 netlink_rcv_skb+0x190/0x3a0 net/netlink/af_netlink.c:2494 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x780/0x930 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x9a8/0xd40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0x519/0x800 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x2b1/0x360 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 60854fd9 ("mac80211: mesh: convert path table to rhashtable") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/20201204162428.2583119-1-eric.dumazet@gmail.comSigned-off-by:
-
- 04 Dec, 2020 10 commits
-
-
Wang Hai authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Changing 'return start' to 'return action_start' can fix this bug. Fixes: 69929d4c ("net: openvswitch: fix TTL decrement action netlink message format") Reported-by:
Wang Hai <wanghai38@huawei.com> Reviewed-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f8ed289f ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts") Reported-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d1566268 ("ipv4: Allow ipv6 gateway with ipv4 routes") Reported-by:
-
Arnd Bergmann authored
A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Acked-by:
Mark Einon <mark.einon@gmail.com> Acked-by:
Simon Horman <simon.horman@netronome.com> Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.orgSigned-off-by:
-
Alex Elder authored
When the coherent memory is freed in gsi_trans_pool_exit_dma(), we are mistakenly passing the size of a single element in the pool rather than the actual allocated size. Fix this bug. Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions") Reported-by:
Stephen Boyd <swboyd@chromium.org> Tested-by:
Sujit Kautkar <sujitka@chromium.org> Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201203215106.17450-1-elder@linaro.orgSigned-off-by:
-
Davide Caratti authored
with the following tdc testcase: 83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the timer is not yet initialized, it's possible to observe a splat like this: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x99/0xcb register_lock_class+0x12dd/0x1750 __lock_acquire+0xfe/0x3970 lock_acquire+0x1c8/0x7f0 del_timer_sync+0x49/0xd0 fq_pie_destroy+0x3f/0x80 [sch_fq_pie] qdisc_create+0x916/0x1160 tc_modify_qdisc+0x3c4/0x1630 rtnetlink_rcv_msg+0x346/0x8e0 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210 [...] Call Trace: debug_object_assert_init+0x268/0x380 try_to_del_timer_sync+0x6a/0x100 del_timer_sync+0x9e/0xd0 fq_pie_destroy+0x3f/0x80 [sch_fq_pie] qdisc_create+0x916/0x1160 tc_modify_qdisc+0x3c4/0x1630 rtnetlink_rcv_msg+0x346/0x8e0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 fix it moving timer_setup() before any failure, like it was done on 'red' with former commit 608b4ada ("net_sched: initialize timer earlier in red_init()"). Fixes: ec97ecf1 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three small fixes: * initialize some data to avoid using stack garbage * fix 6 GHz channel selection in mac80211 * correctly restart monitor mode interfaces in mac80211 * tag 'mac80211-for-net-2020-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: set SDATA_STATE_RUNNING for monitor interfaces cfg80211: initialize rekey_data mac80211: fix return value of ieee80211_chandef_he_6ghz_oper ==================== Link: https://lore.kernel.org/r/20201204122017.118099-1-johannes@sipsolutions.netSigned-off-by:
-
Borwankar, Antara authored
During restarrt, mac80211 is supposed to reconfigure the driver. When there's a monitor interface, the interface is added and the channel context for it was created, but not assigned to it as it was not considered running during the restart. Fix this by setting SDATA_STATE_RUNNING while adding monitor interfaces. Signed-off-by:
Borwankar, Antara <antara.borwankar@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid [reword commit log] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
In case we have old supplicant, the akm field is uninitialized. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Wen Gong authored
ieee80211_chandef_he_6ghz_oper() needs to return true if it determined a value 6 GHz chandef, fix that. Fixes: 1d00ce80 ("mac80211: support S1G association") Signed-off-by:
Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org [rewrite commit message] Signed-off-by:
-
- 03 Dec, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc7, including fixes from bpf, netfilter, wireless drivers, wireless mesh and can. Current release - regressions: - mt76: usb: fix crash on device removal Current release - always broken: - xsk: Fix umem cleanup from wrong context in socket destruct Previous release - regressions: - net: ip6_gre: set dev->hard_header_len when using header_ops - ipv4: Fix TOS mask in inet_rtm_getroute() - net, xsk: Avoid taking multiple skbuff references Previous release - always broken: - net/x25: prevent a couple of overflows - netfilter: ipset: prevent uninit-value in hash_ip6_add - geneve: pull IP header before ECN decapsulation - mpls: ensure LSE is pullable in TC and openvswitch paths - vxlan: respect needed_headroom of lower device - batman-adv: Consider fragmentation for needed packet headroom - can: drivers: don't count arbitration loss as an error - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal - inet_ecn: Fix endianness of checksum update when setting ECT(1) - ibmvnic: fix various corner cases around reset handling - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering - net/mlx5: Enforce HW TX csum offload with kTLS" * tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled net/mlx5: Fix wrong address reclaim when command interface is down net/sched: act_mpls: ensure LSE is pullable before reading it net: openvswitch: ensure LSE is pullable before reading it net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl net: mvpp2: Fix error return code in mvpp2_open() chelsio/chtls: fix a double free in chtls_setkey() rtw88: debug: Fix uninitialized memory in debugfs code vxlan: fix error return code in __vxlan_dev_create() net: pasemi: fix error return code in pasemi_mac_open() cxgb3: fix error return code in t3_sge_alloc_qset() net/x25: prevent a couple of overflows dpaa_eth: copy timestamp fields to new skb in A-050385 workaround net: ip6_gre: set dev->hard_header_len when using header_ops mt76: usb: fix crash on device removal iwlwifi: pcie: add some missing entries for AX210 iwlwifi: pcie: invert values of NO_160 device config entries iwlwifi: pcie: add one missing entry for AX210 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: "One commit is fixing lockdep irq state tracing which broke with -rc6. The other one fixes logical vs physical CPU address mixup in our PCI code. Summary: - fix lockdep irq state tracing - fix logical vs physical CPU address confusion in PCI code" * tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix irq state tracing s390/pci: fix CPU address in MSI for directed IRQ
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p fixes from Dominique Martinet: "Restore splice functionality for 9p" * tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux: fs: 9p: add generic splice_write file operation fs: 9p: add generic splice_read file operations
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2020-12-01 This series introduces some fixes to mlx5 driver. ==================== Link: https://lore.kernel.org/r/20201203043946.235385-1-saeedm@nvidia.comSigned-off-by:
-
Yevgeny Kliteynik authored
STEs format for Connect-X5 and Connect-X6DX different. Currently, on Connext-X6DX the SW steering would break at some point when building STEs w/o giving a proper error message. Fix this by checking the STE format of the current device when initializing domain: add mlx5_ifc definitions for Connect-X6DX SW steering, read FW capability to get the current format version, and check this version when domain is being created. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
Checksum calculation cannot be done in SW for TX kTLS HW offloaded packets. Offload it to the device, disregard the declared state of the TX csum offload feature. Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@nvidia.com> Signed-off-by:
-
Randy Dunlap authored
Fix build when CONFIG_IPV6 is not enabled by making a function be built conditionally. Fixes these build errors and warnings: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow': ../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'? 380 | #define sk_v6_daddr __sk_common.skc_v6_daddr | ^~~~~~~~~~~~ ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr' 55 | &sk->sk_v6_daddr, 16); | ^~~~~~~~~~~ At top level: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function] 47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk) Fixes: 5229a96e ("net/mlx5e: Accel, Expose flow steering API for rules add/del") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
