- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede

- fix for some modern devices that return multi-byte battery report, from
  Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov

Add HID_QUIRK_NOGET for Logitech GROUP device.

Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.

When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.

This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Darren Hart <darren@dvhart.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Ultrabook Keyboard sends a spurious F23 key-press when resuming
from suspend. GNOME uses F23 to toggle the touchpad on/off so this causes
the OSD graphics for the touchpad toggle to show on resume.

The keyboard does not actually have a F23 key, se we can simple fix it
by marking the 0x00070072 HID usage, which normally is F23, to be ignored.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for setting the Fn lock value of the ThinkPad 10 Ultrabook
Keyboard through sysfs, re-using the fn_lock sysfs attribute read/write
helpers from the existing ThinkPad Compact Keyboard with TrackPoint
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some of the function keys special functions all use the same
0x000c0001 usage code, add a mapping for these based on the usage_index;

And add support for the Speaker and Mic mute LEDs integrated into the
F1 and F4 keys.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Except for a single call, there is nothing keyboard-model specific about
the cptkbd fn_lock sysfs attr handlers, rename them dropping the cptkbd
post-/pre-fix, so that they can be re-used for supporting Fn-lock on the
Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Factor out the generic parts of the tpkbd LED code, so that they can be
re-used for supporting the LEDs on the Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge the tpkbd and cptkbd data structures, into a single unified
structure instead of having a separate data structure per keyboard type.

This is a preparation patch for making the tpkbd LED functions more
generic, so that they can be re-used for supporting the LEDs on the
Thinkpad 10 ultrabook keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

These messages appear each time the mouse wakes from sleep, in my case
(Logitech M705), every minute or so.
Let's downgrade them to the "debug" level so they don't fill the kernel log
by default.

While we are at it, let's make clear that this is a wheel multiplier (and
not, for example, XY movement multiplier).

Fixes: 4435ff2f ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some parts of hid-logitech-dj explicitly referred to 0xff for the
receiver index. This patch changes those references to the
HIDPP_RECEIVER_INDEX definition.
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.

Instead, we can use pci_save_state() to hint PCI core that the device
should stay at D0 during suspend. By doing so, PCI core will let the
upstream bridges also stays at D0 so the entire hierarchy is in the
correct power state as PCI spec mandates.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

As this is a cypress HID->COM RS232 style device that is handled
by the cypress_M8 driver we also need to add it to the ignore list
in hid-quirks.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.

But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.

The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.

This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.

This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.

Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

My last name changed to "Rheinsberg", so update the maintainer entries
and adjust the emails while at it.
Signed-off-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Using uhid and KASAN this driver crashed because it was getting
several connection events where it only expected one. Then the
device was added several times to the static device list and it got
corrupted.

This patch checks if the device is already in the list before adding
it.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Neither the trackpad, nor the mouse want input core to generate autorepeat
events for their buttons, so let's reset the bit (as hid-input sets it for
these devices based on the usage vendor code).

Cc: stable@vger.kernel.org
Reported-by: Yariv <oigevald+kernel@gmail.com>
Tested-by: Yariv <oigevald+kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for devices which that have reports with id == 2
Signed-off-by: Caiyuan Xie <caiyuan.xie@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few
minutes of inactivity when using it wired and typing does not result
in any input events any more. This is a common firmware flaw. So add
the ALWAYS_POLL quirk for this device.

GitHub user Dietrich Moerman (dietrichm) tested the quirk and
requested my help in my project
https://github.com/sriemer/fix-linux-mouse issue 22 to provide
this patch.

Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

hid-multitouch currently runs GET_REPORT for Contact Max and again to
retrieve the Win8 blob. If both are within the same report, the
Resolution Multiplier code calls GET_FEATURE again and this time,
possibly due to timing, it causes the ILITEK-TP device interpret the
GET_FEATURE as an instruction to change the mode and effectively stop
the device from functioning as expected.

Notably: the device doesn't even have a Resolution Multiplier so it
shouldn't be affected by any of this at all.

Fix this by making sure we only execute GET_REPORT if there is
a Resolution Multiplier in the respective report. Where the
HID_QUIRK_NO_INIT_REPORTS field is set we just bail out immediately. This
shouldn't be triggered by any real device anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The variable retval is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

usbhid tries to give the device 50 milliseconds to drain its queues when
opening the device, but does it naively by simply sleeping in open handler,
which slows down device probing (and thus may affect overall boot time).

However we do not need to sleep as we can instead mark a point of time in
the future when we should start processing the events.
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - hid-mcp2221 GPIO support, from Rishi Gupta

 - MT_CLS_WIN_8_DUAL obsolete quirk removal from hid-multitouch, from
   Kai-Heng Feng

 - a bunch of new hardware support to hid-asus driver, from Hans de
   Goede

 - other assorted small fixes, cleanups and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: multitouch: Remove MT_CLS_WIN_8_DUAL
  HID: multitouch: enable multi-input as a quirk for some devices
  HID: sony: Fix for broken buttons on DS3 USB dongles
  HID: Add quirks for Trust Panora Graphic Tablet
  HID: apple: Swap the Fn and Left Control keys on Apple keyboards
  HID: asus: Add depends on USB_HID to HID_ASUS Kconfig option
  HID: asus: Fix mute and touchpad-toggle keys on Medion Akoya E1239T
  HID: asus: Add support for multi-touch touchpad on Medion Akoya E1239T
  HID: asus: Add report_size to struct asus_touchpad_info
  HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check
  HID: asus: Simplify skipping of mappings for Asus T100CHI keyboard-dock
  HID: asus: Only set EV_REP if we are adding a mapping
  HID: i2c-hid: add Schneider SCL142ALM to descriptor override
  HID: intel-ish-hid: avoid bogus uninitialized-variable warning
  HID: mcp2221: add GPIO functionality support
  HID: fix typo in Kconfig
  HID: logitech: drop outdated references to unifying receivers

Pull sound updates from Takashi Iwai:
 "It was another busy development cycle, and the majority of changes are
  found in ASoC side. Below are Some highlights.

  ASoC core:
   - Lots of core cleanups and refactorings, still on-going work by
     Morimoto-san

  ASoC drivers:
   - Continued work on cleaning up and improving the Intel SOF stuff,
     along with new platform support including SoundWire

   - Fixes to make the Marvell SSPA driver work upstream

   - Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
     i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
     NAU8814 and Realtek RT1016.

  USB-audio:
   - Improvement for sync and implicit feedback streams with the more
     accurate frame size calculation and full-duplex support

   - Support for RME Babyface Pro and Prioneer DJ DJM

  HD-audio:
   - Fixes for Mic mute LED on HP machines

   - Re-enable support of Intel SST driver for SKL/KBL platforms

  FireWire:
   - Lots of refactoring, add support for RME FireFace and MOTU
     UltraLite-mk3"

* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
  ALSA: es1688: Add the missed snd_card_free()
  ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
  ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
  ASoC: qcom: q6asm-dai: kCFI fix
  ASoC: soc-card: add snd_soc_card_remove_dai_link()
  ASoC: soc-card: add snd_soc_card_add_dai_link()
  ASoC: soc-card: add snd_soc_card_set_bias_level_post()
  ASoC: soc-card: add snd_soc_card_set_bias_level()
  ASoC: soc-card: add snd_soc_card_remove()
  ASoC: soc-card: add snd_soc_card_late_probe()
  ASoC: soc-card: add snd_soc_card_probe()
  ASoC: soc-card: add probed bit field to snd_soc_card
  ASoC: soc-card: add snd_soc_card_resume_post()
  ASoC: soc-card: add snd_soc_card_resume_pre()
  ASoC: soc-card: add snd_soc_card_suspend_post()
  ASoC: soc-card: add snd_soc_card_suspend_pre()
  ASoC: soc-card: move snd_soc_card_subclass to soc-card
  ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
  ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
  ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
  ...

Pull pcmcia updates from Dominik Brodowski:
 "Two minor PCMCIA odd fixes: one replacing zero-length arrays with a
  flexible-array member, and one making a local function static"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: make pccard_loop_tuple() static
  pcmcia: Replace zero-length array with flexible-array

Pull LED updates from Pavel Machek:
 "New drivers: aw2013, sgm3140, some fixes

  Nothing much to see here, next release should be more interesting"

* tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: add aw2013 driver
  dt-bindings: leds: Add binding for aw2013
  leds: trigger: remove redundant assignment to variable ret
  leds: netxbig: Convert to use GPIO descriptors
  leds: add sgm3140 driver
  dt-bindings: leds: Add binding for sgm3140
  leds: ariel: Add driver for status LEDs on Dell Wyse 3020
  leds: pwm: check result of led_pwm_set() in led_pwm_add()
  leds: tlc591xxt: hide error on EPROBE_DEFER
  leds: tca6507: Include the right header
  leds: lt3593: Drop surplus include
  leds: lp3952: Include the right header
  leds: lm355x: Drop surplus include

Merge tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros_ec_typec:
   - Add notifier for update, and register port partner

  Sensors/iio:
   - Fixes to cros_ec_sensorhub around allocation of resources, and
     send_sample

  Wilco EC:
   - Fix to output format of h1_gpio

  Misc:
   - Misc fixes to appease kernel-doc and other warnings
   - Set user space log size in chromeos_pstore"

* tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_usbpd_logger: Add __printf annotation to append_str()
  platform/chrome: cros_ec_i2c: Appease the kernel-doc deity
  platform/chrome: typec: Fix ret value check error
  platform/chrome: cros_ec_typec: Register port partner
  platform/chrome: cros_ec_typec: Add struct for port data
  platform/chrome: cros_ec_typec: Use notifier for updates
  platform/chrome: cros_ec_ishtp: free ishtp buffer before sending event
  platform/chrome: cros_ec_ishtp: skip old cros_ec responses
  platform/chrome: wilco_ec: Provide correct output format to 'h1_gpio' file
  platform/chrome: chromeos_pstore: set user space log size

Pull watchdog updates from Wim Van Sebroeck:

 - add new arm_smc_wdt watchdog driver

 - da9062 and da9063 improvements

 - clarify documentation about stop() that became optional

 - document r8a7742 support

 - some overall fixes and improvements

* tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: m54xx: Add missing include
  dt-bindings: watchdog: renesas,wdt: Document r8a7742 support
  watchdog: Fix runtime PM imbalance on error
  watchdog: riowd: remove unneeded semicolon
  watchdog: Add new arm_smc_wdt watchdog driver
  dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
  watchdog: imx2_wdt: update contact email
  watchdog: iTCO: fix link error
  watchdog: da9062: No need to ping manually before setting timeout
  watchdog: da9063: Make use of pre-configured timeout during probe
  watchdog: da9062: Initialize timeout during probe
  watchdog: clarify that stop() is optional
  watchdog: imx_sc_wdt: Fix reboot on crash
  watchdog: ts72xx_wdt: fix build error

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Add backlight_device_get_by_name() to the API

  New Device Support:
   - Add support for WLED5 to Qualcomm WLED

  Fix-ups:
   - Convert to GPIO descriptors in l4f00242t03
   - Device Tree fix-ups for qcom-wled

  Bug Fixes:
   - Properly disable regulators on .probe() failure"

* tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: Add backlight_device_get_by_name()
  backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs
  dt-bindings: backlight: qcom-wled: Add WLED5 bindings
  backlight: qcom-wled: Add callback functions
  dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format
  backlight: l4f00242t03: Convert to GPIO descriptors
  backlight: lp855x: Ensure regulators are disabled on probe failure

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Constify 'properties' attribute in core header file

  New Drivers:
   - Add support for Gateworks System Controller
   - Add support for MediaTek MT6358 PMIC
   - Add support for Mediatek MT6360 PMIC
   - Add support for Monolithic Power Systems MP2629 ADC and Battery charger

  Fix-ups:
   - Use new I2C API in htc-i2cpld
   - Remove superfluous code in sprd-sc27xx-spi
   - Improve error handling in stm32-timers
   - Device Tree additions/fixes in mt6397
   - Defer probe betterment in wm8994-core
   - Improve module handling in wm8994-core
   - Staticify in stpmic1
   - Trivial (spelling, formatting) in tqmx86

  Bug Fixes:
   - Fix incorrect register/PCI IDs in intel-lpss-pci
   - Fix unbalanced Regulator API calls in wm8994-core
   - Fix double free() in wcd934x
   - Remove IRQ domain on failure in stmfx
   - Reset chip on resume in stmfx
   - Disable/enable IRQs on suspend/resume in stmfx
   - Do not use bulk writes on H/W which does not support them in max77620"

* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
  mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
  mfd: Add support for PMIC MT6360
  mfd: max77620: Use single-byte writes on MAX77620
  mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
  mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
  mfd: stmfx: Fix stmfx_irq_init error path
  mfd: stmfx: Reset chip on resume as supply was disabled
  mfd: wm8994: Silence warning about supplies during deferred probe
  mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
  mfd: wm8994: Fix driver operation if loaded as modules
  dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
  mfd: Constify properties in mfd_cell
  mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
  mfd: sprd: Remove unnecessary spi_bus_type setting
  mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
  mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
  mfd: stpmic1: Make stpmic1_regmap_config static
  mfd: htc-i2cpld: Convert to use i2c_new_client_device()
  MAINTAINERS: Add entry for mp2629 Battery Charger driver
  power: supply: mp2629: Add impedance compensation config
  ...

Pull smack updates from Casey Schaufler:
 "Clean out dead code and repair an out-of-bounds warning"

* tag 'Smack-for-5.8' of git://github.com/cschaufler/smack-next:
  Smack: Remove unused inline function smk_ad_setfield_u_fs_path_mnt
  Smack:- Remove redundant inode_smack cache
  Smack:- Remove mutex lock "smk_lock" from inode_smack
  Smack: slab-out-of-bounds in vsscanf
  smack: remove redundant structure variable from header.
  smack: avoid unused 'sip' variable warning

Pull keyring updates from David Howells:

 - Fix a documentation warning.

 - Replace a zero-length array with a flexible one

 - Make the big_key key type use ChaCha20Poly1305 and use the crypto
   algorithm directly rather than going through the crypto layer.

 - Implement the update op for the big_key type.

* tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys: Implement update for the big_key type
  security/keys: rewrite big_key crypto to use library interface
  KEYS: Replace zero-length array with flexible-array
  Documentation: security: core.rst: add missing argument

Pull perf tooling updates from Arnaldo Carvalho de Melo:
 "These are additional changes to the perf tools, on top of what Ingo
  already submitted.

   - Further Intel PT call-trace fixes

   - Improve SELinux docs and tool warnings

   - Fix race at exit in 'perf record' using eventfd.

   - Add missing build tests to the default set of 'make -C tools/perf
     build-test'

   - Sync msr-index.h getting new AMD MSRs to decode and filter in 'perf
     trace'.

   - Fix fallback to libaudit in 'perf trace' for arches not using
     per-arch *.tbl files.

   - Fixes for 'perf ftrace'.

   - Fixes and improvements for the 'perf stat' metrics.

   - Use dummy event to get PERF_RECORD_{FORK,MMAP,etc} while
     synthesizing those metadata events for pre-existing threads.

   - Fix leaks detected using clang tooling.

   - Improvements to PMU event metric testing.

   - Report summary for 'perf stat' interval mode at the end, summing up
     all the intervals.

   - Improve pipe mode, i.e. this now works as expected, continuously
     dumping samples:

        # perf record -g -e raw_syscalls:sys_enter | perf --no-pager script

   - Fixes for event grouping, detecting incompatible groups such as:

        # perf stat -e '{cycles,power/energy-cores/}' -v
        WARNING: group events cpu maps do not match, disabling group:
          anon group { power/energy-cores/, cycles }
            power/energy-cores/: 0
            cycles: 0-7

   - Fixes for 'perf probe': blacklist address checking, number of
     kretprobe instances, etc.

   - JIT processing improvements and fixes plus the addition of a 'perf
     test' entry for the java demangler.

   - Add support for synthesizing first/last level cache, TLB and remove
     access events from HW tracing in the auxtrace code, first to use is
     ARM SPE.

   - Vendor events updates and fixes, including for POWER9 and Intel.

   - Allow using ~/.perfconfig for removing the ',' separators in 'perf
     stat' output.

   - Opt-in support for libpfm4"

* tag 'perf-tools-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (120 commits)
  perf tools: Remove some duplicated includes
  perf symbols: Fix kernel maps for kcore and eBPF
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf stat: Ensure group is defined on top of the same cpu mask
  perf libdw: Fix off-by 1 relative directory includes
  perf arm-spe: Support synthetic events
  perf auxtrace: Add four itrace options
  perf tools: Move arm-spe-pkt-decoder.h/c to the new dir
  perf test: Initialize memory in dwarf-unwind
  perf tests: Don't tail call optimize in unwind test
  tools compiler.h: Add attribute to disable tail calls
  perf build: Add a LIBPFM4=1 build test entry
  perf tools: Add optional support for libpfm4
  perf tools: Correct license on jsmn JSON parser
  perf jit: Fix inaccurate DWARF line table
  perf jvmti: Remove redundant jitdump line table entries
  perf build: Add NO_SDT=1 to the default set of build tests
  perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
  perf build: Add NO_SYSCALL_TABLE=1 to the build tests
  perf build: Remove libaudit from the default feature checks
  ...

The atomisp_mrfld_power() function isn't actually ever called, because
the two call-sites have commented out the use because it breaks on some
platforms.  That results in:

  drivers/staging/media/atomisp/pci/atomisp_v4l2.c:764:12: warning: ‘atomisp_mrfld_power’ defined but not used [-Wunused-function]
    764 | static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
        |            ^~~~~~~~~~~~~~~~~~~

during the build.

Rather than commenting out the use entirely, just disable it
semantically instead (using a "0 &&" construct), leaving the call in
place from a syntax standpoint, and avoiding the warning.

I really don't want my builds to have any warnings that can then hide
real issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>