- 27 May, 2010 40 commits
-
-
Julia Lawall authored
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
FUJITA Tomonori authored
Add ARCH_KMALLOC_MINALIGN description in "Platform Issues" section. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
FUJITA Tomonori authored
Handing DMA mapping errors is essential. Let's put it in the more appropriate place rather than the end of the doc. Signed-off-by:
-
FUJITA Tomonori authored
Now we have <asm-generic/scatterlist.h>. Architectures should use it instead of inventing the own scatterlist struct. Let's update the description. Signed-off-by:
-
FUJITA Tomonori authored
Add the concrete DMA mapping error handling for SCSI drivers on the queuecommand path. Signed-off-by:
-
FUJITA Tomonori authored
Since 2.6.5, it had been commented, 'for backwards compatibility, removed in 2.7.x'. Since 2.6.31, it have been marked as __deprecated. I think that we can remove the API safely now. Signed-off-by:
-
FUJITA Tomonori authored
dma_sync_single() is deprecated and will be removed soon. No functional change since dma_sync_single is the wrapper of dma_sync_single_for_cpu. saa7134-go7007.c is commented out but anyway let's replace it. Signed-off-by:
-
FUJITA Tomonori authored
Adds the concrete DMA mapping error handling for Networking drivers on the transmit path. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
FUJITA Tomonori authored
sync_single_range_for_cpu and sync_single_range_for_device hooks are unnecessary because sync_single_for_cpu and sync_single_for_device can be used instead. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
FUJITA Tomonori authored
swiotlb_sync_single_range_for_cpu and swiotlb_sync_single_range_for_device are unnecessary because swiotlb_sync_single_for_cpu and swiotlb_sync_single_for_device can be used instead. Signed-off-by:
-
FUJITA Tomonori authored
sync_single_range_for_cpu and sync_single_range_for_device hooks in swiotlb_dma_ops are unnecessary because sync_single_for_cpu and sync_single_for_device are used there. Signed-off-by:
-
FUJITA Tomonori authored
sync_single_range_for_cpu and sync_single_range_for_device hooks in swiotlb_dma_ops are unnecessary because sync_single_for_cpu and sync_single_for_device are used there. Signed-off-by:
-
FUJITA Tomonori authored
sync_single_range_for_cpu and sync_single_range_for_device hooks in swiotlb_dma_ops are unnecessary because sync_single_for_cpu and sync_single_for_device are used there. Signed-off-by:
-
Joe Perches authored
Reduces text by eliminating multiple __FILE__ uses. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Joe Perches <joe@perches.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Tim Small <tim@buttersideup.com> Signed-off-by:
-
Joe Eykholt authored
This patch moves the definition of struct rnd_state and the inline __seed() function to linux/random.h. It renames the static __random32() function to prandom32() and exports it for use in modules. prandom32() is useful as a privately-seeded pseudo random number generator that can give the same result every time it is initialized. For FCoE FC-BB-6 VN2VN mode self-selected unique FC address generation, we need an pseudo-random number generator seeded with the 64-bit world-wide port name. A truly random generator or one seeded with randomness won't do because the same sequence of numbers should be generated each time we boot or the link comes up. A prandom32_seed() inline function is added to the header file. It is inlined not for speed, but so the function won't be expanded in the base kernel, but only in the module that uses it. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Acked-by:
Matt Mackall <mpm@selenic.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Oleg Nesterov authored
Cosmetic, no changes in the compiled code. Just s/NULL/SIG_DFL/ to make it more readable and grep-friendly. Note: probably SIG_IGN makes more sense, we could kill ignore_signals(). But then kernel_init() should do flush_signal_handlers() before exec(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Mathias Krause <Mathias.Krause@secunet.com> Acked-by:
Roland McGrath <roland@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
copy_process(pid => &init_struct_pid) doesn't do attach_pid/etc. It shouldn't, but this means that the idle threads run with the wrong pids copied from the caller's task_struct. In x86 case the caller is either kernel_init() thread or keventd. In particular, this means that after the series of cpu_up/cpu_down an idle thread (which never exits) can run with .pid pointing to nowhere. Change fork_idle() to initialize idle->pids[] correctly. We only set .pid = &init_struct_pid but do not add .node to list, INIT_TASK() does the same for the boot-cpu idle thread (swapper). Signed-off-by:
-
Oleg Nesterov authored
"statically initialize struct pid for swapper" commit 820e45db says: Statically initialize a struct pid for the swapper process (pid_t == 0) and attach it to init_task. This is needed so task_pid(), task_pgrp() and task_session() interfaces work on the swapper process also. OK, but: - it doesn't make sense to add init_task.pids[].node into init_struct_pid.tasks[], and in fact this just wrong. idle threads are special, they shouldn't be visible on any global list. In particular do_each_pid_task(init_struct_pid) shouldn't see swapper. This is the actual reason why kill(0, SIGKILL) from /sbin/init (which starts with 0,0 special pids) crashes the kernel. The signal sent to pgid/sid == 0 must never see idle threads, even if the previous patch fixed the crash itself. - we have other idle threads running on the non-boot CPUs, see the next patch. Change INIT_STRUCT_PID/INIT_PID_LINK to create the empty/unhashed hlist_head/hlist_node. Like any other idle thread swapper can never exit, so detach_pid()->__hlist_del() is not possible, but we could change INIT_PID_LINK() to set pprev = &next if needed. All we need is the valid swapper->pids[].pid == &init_struct_pid. Reported-by:
Mathias Krause <mathias.krause@secunet.com> Signed-off-by:
-
Oleg Nesterov authored
The trivial /sbin/init doing int main(void) { kill(0, SIGKILL) } crashes the kernel. This happens because __kill_pgrp_info(init_struct_pid) also sends SIGKILL to the swapper process which runs with the uninitialized ->thread_group. Change INIT_TASK() to initialize ->thread_group properly. Note: the real problem is that the swapper process must not be visible to signals, see the next patch. But this change is right anyway and fixes the crash. Reported-and-tested-by:Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Hedi Berriche authored
On a system with a substantial number of processors, the early default pid_max of 32k will not be enough. A system with 1664 CPU's, there are 25163 processes started before the login prompt. It's estimated that with 2048 CPU's we will pass the 32k limit. With 4096, we'll reach that limit very early during the boot cycle, and processes would stall waiting for an available pid. This patch increases the early maximum number of pids available, and increases the minimum number of pids that can be set during runtime. [akpm@linux-foundation.org: fix warnings] Signed-off-by:
Hedi Berriche <hedi@sgi.com> Signed-off-by:
Mike Travis <travis@sgi.com> Signed-off-by:
Robin Holt <holt@sgi.com> Acked-by:
-
Thomas Moll authored
Fix the maintenance access functions to farend RapidIO devices. 1. Fixed shift of the given offset, to open the maintenance window 2. Mask offset to limit access to the opened maintenance window 3. Added extended destid part to rowtear register, required for 16bit mode This method is matching maintenance transactions generation described by Freescale in the appnote AN2932. With this modification full access to a 16MB maintenance window is possible, this patch is required for IDT cps switches. For easier handling of the access routines, the access was limited to aligned memory regions. This should be no problem because all registers are 32bit wide. Signed-off-by:
Thomas Moll <thomas.moll@sysgo.com> Tested-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Alexandre Bounine authored
Fix to use correct default value for routing table entries. Signed-off-by:
-
Alexandre Bounine authored
Add switch specific domain routines required for 16-bit routing support in switches with hierarchical implementation of routing tables. Signed-off-by:
-
Alexandre Bounine authored
Modify the way how RapidIO switch operations are declared. Multiple assignments through the linker script replaced by single initialization call. Signed-off-by:
-
Alexandre Bounine authored
Add debug configuration option for RapidIO subsystem. Signed-off-by:
-
Alexandre Bounine authored
Signed-off-by:
-
Thomas Moll authored
Add the functionality to enable Input receiver and Output transmitter of every port, to allow non-maintenance traffic. Signed-off-by:
Alexandre Bounine <abounine@tundra.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Alexandre Bounine authored
Add Machine Check exception handling into RapidIO port driver for Freescale SoCs (MPC85xx). Signed-off-by:
-
Alexandre Bounine authored
Add RapidIO Port-Write message handler for Freescale SoCs with RapidIO port. Signed-off-by:
-
Alexandre Bounine authored
Add RapidIO Port-Write message handling in the context of Error Management Extensions Specification Rev.1.3. Signed-off-by:
-
Alexandre Bounine authored
Add switch access locking during RapidIO discovery. Access lock is required when reading switch routing table contents due to indexed mechanism of RT addressing. Signed-off-by:
-
Alexandre Bounine authored
Extentions to RapidIO switch support: 1. modify switch route operation declarations to allow using single switch-specific file for family of switches that share the same route table operations. 2. add standard route table operations for switches that that support route table manipulation registers as defined in the Rev.1.3 of RapidIO specification. 3. add clear-route-table operation for switches 4. add CPSxx and TSIxxx families of RapidIO switches Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
-
Julia Lawall authored
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by:
-
Marco Stornelli authored
Ramoops, like mtdoops, can log oops/panic information but in RAM. It can be used with persistent RAM for systems without flash support. In addition, for this systems, with this driver, it's no more needed add to the kernel the mtd subsystem with advantage in footprint. It can be used in a very easy way with persistent RAM for systems without flash support. For these systems, with this driver, it is no longer required to cinlude mtd subsystem with an advantage in footprint. In addition, you can save flash space and store this information only in RAM. Signed-off-by:
Marco Stornelli <marco.stornelli@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc; Anders Grafstrom <anders.grafstrom@netinsight.net> Cc: Yuasa Yoichi <yuasa@linux-mips.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by:
-
Jiri Kosina authored
If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by:
-
Myron Stowe authored
Update core IPMI driver printk()'s with dev_printk(), and its constructs, to provide additional device topology information. An example of the additional device topology for a PNP device - ipmi_si 00:02: probing via ACPI ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, ... ipmi_si 00:02: IPMI kcs interface initialized and for a PCI device - ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spaci... ipmi_si 0000:01:04.6: IPMI kcs interface initialized [minyard@acm.org: rework to fix rejects, extended it a bit] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Myron Stowe <myron.stowe@hp.com> Signed-off-by:
-
Myron Stowe authored
Convert PNP patch (git 9e368fa0) to maintain a pointer to a PNP device, 'pnp_dev', instead of the ACPI device, 'acpi_dev', that is currently being tracked with PNP based IPMI device discovery. Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Acked-by:
-
Corey Minyard authored
The timeouts in IPMI are in the 1-5 second range in message handling, so a 1 second timeout is a reasonable thing to do. This should help with reducing power consumption on idle systems. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Matthew Garrett authored
Some odd systems may have multiple BMCs, and we want to be able to support them. Let's make the assumption that if a system legitimately has multiple BMCs then each BMC's SI will be of the same type, and also that we won't see multiple SIs of the same type unless we have multiple BMCs. If these hold true then we should register all SIs of the same type. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
