- 24 Mar, 2015 14 commits
-
-
Herbert Xu authored
This patch reintroduces immediate rehash during insertion. If we find during insertion that the table is full or the chain length exceeds a set limit (currently 16 but may be disabled with insecure_elasticity) then we will force an immediate rehash. The rehash will contain an expansion if the table utilisation exceeds 75%. If this rehash fails then the insertion will fail. Otherwise the insertion will be reattempted in the new hash table. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch adds the ability to allocate bucket table with GFP_ATOMIC instead of GFP_KERNEL. This is needed when we perform an immediate rehash during insertion. Signed-off-by:
-
Herbert Xu authored
This patch adds the missing bits to allow multiple rehashes. The read-side as well as remove already handle this correctly. So it's only the rehasher and insertion that need modification to handle this. Note that this patch doesn't actually enable it so for now rehashing is still only performed by the worker thread. This patch also disables the explicit expand/shrink interface because the table is meant to expand and shrink automatically, and continuing to export these interfaces unnecessarily complicates the life of the rehasher since the rehash process is now composed of two parts. Signed-off-by:
-
Herbert Xu authored
This patch changes rhashtable_shrink to shrink to the smallest size possible rather than halving the table. This is needed because with multiple rehashing we will defer shrinking until all other rehashing is done, meaning that when we do shrink we may be able to shrink a lot. Signed-off-by:
-
Herbert Xu authored
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. The default is now jhash so removing the setting makes no difference apart from making one less copy of jhash in the kernel. Signed-off-by:
-
Herbert Xu authored
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. As the key length is a multiple of 4, this means that we will actually end up using jhash2. Signed-off-by:
-
Herbert Xu authored
Since every current rhashtable user uses jhash as their hash function, the fact that jhash is an inline function causes each user to generate a copy of its code. This function provides a solution to this problem by allowing hashfn to be unset. In which case rhashtable will automatically set it to jhash. Furthermore, if the key length is a multiple of 4, we will switch over to jhash2. Signed-off-by:
-
Herbert Xu authored
When rht_key_hashfn is called from rhashtable itself and params is equal to ht->p, there is no point in checking params.key_len and falling back to ht->p.key_len. For some reason gcc couldn't figure out that params is the same as ht->p. So let's help it by only checking params.key_len when it's a constant. Signed-off-by:
-
Herbert Xu authored
The walker is a lockless reader so it too needs an smp_rmb before reading the future_tbl field in order to see any new tables that may contain elements that we should have walked over. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.1-20150323' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-03-23 this is a pull request of 6 patches for net-next/master. A patch by Florian Westphal, converts the skb->destructor to use sock_efree() instead of own destructor. Ahmed S. Darwish's patch converts the kvaser_usb driver to use unregister_candev(). A patch by me removes a return from a void function in the m_can driver. Yegor Yefremov contributes a patch for combined rx/tx LED trigger support. A sparse warning in the esd_usb2 driver was fixes by Thomas Körper. Ben Dooks converts the at91_can driver to use endian agnostic IO accessors. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. Basically, more incremental updates for br_netfilter from Florian Westphal, small nf_tables updates (including one fix for rb-tree locking) and small two-liner to add extra validation for the REJECT6 target. More specifically, they are: 1) Use the conntrack status flags from br_netfilter to know that DNAT is happening. Patch for Florian Westphal. 2) nf_bridge->physoutdev == NULL already indicates that the traffic is bridged, so let's get rid of the BRNF_BRIDGED flag. Also from Florian. 3) Another patch to prepare voidization of seq_printf/seq_puts/seq_putc, from Joe Perches. 4) Consolidation of nf_tables_newtable() error path. 5) Kill nf_bridge_pad used by br_netfilter from ip_fragment(), from Florian Westphal. 6) Access rb-tree root node inside the lock and remove unnecessary locking from the get path (we already hold nfnl_lock there), from Patrick McHardy. 7) You cannot use a NFT_SET_ELEM_INTERVAL_END when the set doesn't support interval, also from Patrick. 8) Enforce IP6T_F_PROTO from ip6t_REJECT to make sure the core is actually restricting matches to TCP. ==================== Signed-off-by: -
Alexander Drozdov authored
Introduce TP_STATUS_CSUM_VALID tp_status flag to tell the af_packet user that at least the transport header checksum has been already validated. For now, the flag may be set for incoming packets only. Signed-off-by:
Alexander Drozdov <al.drozdov@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Alexander Drozdov authored
It is just an optimization. We don't need the value of status variable if the packet is filtered. Signed-off-by:
-
Fan Du authored
Eric Hugne reported following error : I'm hitting this warning on latest net-next when i try to SSH into a machine with eth0 added to a bridge (but i think the problem is older than that) Steps to reproduce: node2 ~ # brctl addif br0 eth0 [ 223.758785] device eth0 entered promiscuous mode node2 ~ # ip link set br0 up [ 244.503614] br0: port 1(eth0) entered forwarding state [ 244.505108] br0: port 1(eth0) entered forwarding state node2 ~ # [ 251.160159] ------------[ cut here ]------------ [ 251.160831] WARNING: CPU: 0 PID: 3 at include/net/request_sock.h:102 tcp_v4_err+0x6b1/0x720() [ 251.162077] Modules linked in: [ 251.162496] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc3+ #18 [ 251.163334] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 251.164078] ffffffff81a8365c ffff880038a6ba18 ffffffff8162ace4 0000000000009898 [ 251.165084] 0000000000000000 ffff880038a6ba58 ffffffff8104da85 ffff88003fa437c0 [ 251.166195] ffff88003fa437c0 ffff88003fa74e00 ffff88003fa43bb8 ffff88003fad99a0 [ 251.167203] Call Trace: [ 251.167533] [<ffffffff8162ace4>] dump_stack+0x45/0x57 [ 251.168206] [<ffffffff8104da85>] warn_slowpath_common+0x85/0xc0 [ 251.169239] [<ffffffff8104db65>] warn_slowpath_null+0x15/0x20 [ 251.170271] [<ffffffff81559d51>] tcp_v4_err+0x6b1/0x720 [ 251.171408] [<ffffffff81630d03>] ? _raw_read_lock_irq+0x3/0x10 [ 251.172589] [<ffffffff81534e20>] ? inet_del_offload+0x40/0x40 [ 251.173366] [<ffffffff81569295>] icmp_socket_deliver+0x65/0xb0 [ 251.174134] [<ffffffff815693a2>] icmp_unreach+0xc2/0x280 [ 251.174820] [<ffffffff8156a82d>] icmp_rcv+0x2bd/0x3a0 [ 251.175473] [<ffffffff81534ea2>] ip_local_deliver_finish+0x82/0x1e0 [ 251.176282] [<ffffffff815354d8>] ip_local_deliver+0x88/0x90 [ 251.177004] [<ffffffff815350f0>] ip_rcv_finish+0xf0/0x310 [ 251.177693] [<ffffffff815357bc>] ip_rcv+0x2dc/0x390 [ 251.178336] [<ffffffff814f5da3>] __netif_receive_skb_core+0x713/0xa20 [ 251.179170] [<ffffffff814f7fca>] __netif_receive_skb+0x1a/0x80 [ 251.179922] [<ffffffff814f97d4>] process_backlog+0x94/0x120 [ 251.180639] [<ffffffff814f9612>] net_rx_action+0x1e2/0x310 [ 251.181356] [<ffffffff81051267>] __do_softirq+0xa7/0x290 [ 251.182046] [<ffffffff81051469>] run_ksoftirqd+0x19/0x30 [ 251.182726] [<ffffffff8106cc23>] smpboot_thread_fn+0x153/0x1d0 [ 251.183485] [<ffffffff8106cad0>] ? SyS_setgroups+0x130/0x130 [ 251.184228] [<ffffffff8106935e>] kthread+0xee/0x110 [ 251.184871] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.185690] [<ffffffff81631108>] ret_from_fork+0x58/0x90 [ 251.186385] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.187216] ---[ end trace c947fc7b24e42ea1 ]--- [ 259.542268] br0: port 1(eth0) entered forwarding state Remove the double calls to reqsk_put() [edumazet] : I got confused because reqsk_timer_handler() _has_ to call reqsk_put(req) after calling inet_csk_reqsk_queue_drop(), as the timer handler holds a reference on req. Signed-off-by:
Fan Du <fan.du@intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Erik Hugne <erik.hugne@ericsson.com> Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by:
-
- 23 Mar, 2015 26 commits
-
-
Marcelo Ricardo Leitner authored
Dan Carpenter's static checker warned that in vxlan_stop we are checking if 'vs' can be NULL while later we simply derreference it. As after commit 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") 'vs' just cannot be NULL in vxlan_stop() anymore, as the interface won't go up if the socket initialization fails. So we are good to just remove the check and make it consistent. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Alexander Duyck authored
When I updated the code to address a possible null pointer dereference in resize I ended up reverting an exception handling fix for the suffix length in the event that inflate or halve failed. This change is meant to correct that by reverting the earlier fix and instead simply getting the parent again after inflate has been completed to avoid the possible null pointer issue. Fixes: ddb4b9a1 ("fib_trie: Address possible NULL pointer dereference in resize") Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Felix Fietkau authored
Always use software checksumming, since the hardware does not have any checksum offload support. This significantly improves local TCP tx performance. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
This improves performance for routing and local rx Signed-off-by:
-
Felix Fietkau authored
The start-of-frame and end-of-frame bits were accidentally swapped. In the current code it does not make any difference, since they are always used together. Signed-off-by:
-
YOSHIFUJI Hideaki/吉藤英明 authored
net: Move the comment about unsettable socket-level options to default clause and update its reference. We implement the SO_SNDLOWAT etc not to be settable and return ENOPROTOOPT per 1003.1g 7. Move the comment to appropriate position and update the reference. Signed-off-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp listener refactoring part 15 I am trying to make the final patch pushing request socks into ehash as small as possible. In this patch series, I made various adjustments for the SYNACK generation, allowing me to reach 1 Mpps SYNACK in my stress test (still hitting LISTENER spinlock of course, and the syn_wait spinlock) I also converted the ICMP handlers a bit ahead of time : They no longer need to get the LISTENER socket, and can use only a lookup in ehash table. No big deal if we ignore ICMP for requests socks before the final steps. ==================== Signed-off-by: -
Eric Dumazet authored
dccp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by:
-
Eric Dumazet authored
dccp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New dccp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by:
-
Eric Dumazet authored
tcp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by:
-
Eric Dumazet authored
tcp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New tcp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by:
-
Eric Dumazet authored
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually. We hold syn_wait_lock for such small sections, that it makes no sense to use a read/write lock. A spin lock is simply faster. Signed-off-by:
-
Eric Dumazet authored
listener can be source of false sharing. request sock has some useful information like : ireq->ir_iif, ireq->ir_num, ireq->ireq_net This patch does not solve the major problem of having to read sk->sk_protocol which is sharing a cache line with sk->sk_wmem_alloc. (This same field is read later in ip_build_and_send_pkt()) One idea would be to move sk_protocol close to sk_family (using 8 bits instead of 16 for sk_family seems enough) Signed-off-by:
-
Eric Dumazet authored
It is not needed, and req->sk_listener points to the listener anyway. request_sock argument can be const. Signed-off-by:
-
Eric Dumazet authored
Cache listen_sock_qlen() to limit false sharing, and read rskq_defer_accept once as it might change under us. Signed-off-by:
-
David S. Miller authored
Tilman Schmidt says: ==================== isdn/gigaset: restructure modem response parser This series of patches restructures the Gigaset ISDN driver's modem response parser to improve code readability and conform better to the device's specification and actual behaviour. Could you please merge these through net-next? ==================== Signed-off-by: -
Tilman Schmidt authored
Restructure the control structure of the modem response parser to improve readability and error handling. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
Separate CID detection from main parser loop. Signed-off-by:
-
Tilman Schmidt authored
Separate literal string handling from main parser loop. Signed-off-by:
-
Tilman Schmidt authored
Factor out queueing of modem response events into helper function add_cid_event(). Signed-off-by:
-
Roopa Prabhu authored
make it same as the netdev_switch_port_bridge_setlink/dellink api (ie traverse lowerdevs to get to the switch port). removes "WARN_ON(!ops->ndo_switch_parent_id_get)" because direct bridge ports can be stacked netdevices (like bonds and team of switch ports) which may not implement this ndo. v2 to v3: - remove changes to bond and team. Bring back the transparently following lowerdevs like i initially had for setlink/getlink (http://www.spinics.net/lists/netdev/msg313436.html) dave and scott feldman also seem to prefer it be that way and move to non-transparent way of doing things if we see a problem down the lane. v3 to v4: - fix ret initialization v4 to v5: - return err on first failure (scott feldman) v5 to v6: - change variable name (err) and initialize to -EOPNOTSUPP (scott feldman). Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
WANG Cong authored
skb->priority can be set for two purposes: 1) With respect to IP TOS field, which is computed by a mask. Ususally used for priority qdisc's (pfifo, prio etc.), on TX side (we only have ingress qdisc on RX side). 2) Used as a classid or flowid, works in the same way with tc classid. What's more, this can even override the classid of tc filters. For case 1), it has been respected within its netns, I don't see any point of keeping it for another netns, especially when packets will be forwarded to Rx path (no matter from TX path or RX path). For case 2) we care, our applications run inside a netns, and we classify the packets by our own filters outside, If some application sets this priority, it could bypass our filters, therefore clear it when moving out of a netns, it makes no sense to bypass tc filters out of its netns. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Tadeusz Struk says: ==================== Add support for async socket operations After the iocb parameter has been removed from sendmsg() and recvmsg() ops the socket layer, and the network stack no longer support async operations. This patch set adds support for asynchronous operations on sockets back. Changes in v3: * As sugested by Al Viro instead of adding new functions aio_sendmsg and aio_recvmsg, added a ptr to iocb into the kernel-side msghdr structure. This way no change to aio.c is required. Changes in v2: * removed redundant total_size param from aio_sendmsg and aio_recvmsg functions ==================== Signed-off-by: -
Tadeusz Struk authored
The way the algif_skcipher works currently is that on sendmsg/sendpage it builds an sgl for the input data and then on read/recvmsg it sends the job for encryption putting the user to sleep till the data is processed. This way it can only handle one job at a given time. This patch changes it to be asynchronous by adding AIO support. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Tadeusz Struk authored
Allow to link af_alg sgls. Signed-off-by:
-
tadeusz.struk@intel.com authored
Add support for async operations. Signed-off-by:
-
