- 24 Oct, 2022 32 commits
-
-
Amit Cohen authored
Add support for 800Gbps speed, link modes of 100Gbps per lane. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdfSigned-off-by:
-
David S. Miller authored
Steen Hegelund says: ==================== Add support for Sparx5 IS2 VCAP This provides initial support for the Sparx5 VCAP functionality via the 'tc' traffic control userspace tool and its flower filter. Overview: ========= The supported flower filter keys and actions are: - source and destination MAC address keys - trap action - pass action The supported Sparx5 VCAPs are: IS2 (see below for more info) The VCAP (Versatile Content-Aware Processor) feature is essentially a TCAM with rules consisting of: - Programmable key fields - Programmable action fields - A counter (which may be only one bit wide) Besides this each VCAP has: - A number of independent lookups - A keyset configuration typically per port per lookup VCAPs are used in many of the TSN features such as PSFP, PTP, FRER as well as the general shaping, policing and access control, so it is an important building block for these advanced features. Functionality: ============== When a frame is passed to a VCAP the VCAP will generate a set of keys (keyset) based on the traffic type. If there is a rule created with this keyset in the VCAP and the values of the keys matches the values in the keyset of the frame, the rule is said to match and the actions in the rule will be executed and the rule counter will be incremented. No more rules will be examined in this VCAP lookup. If there is no match in the current lookup the frame will be matched against the next lookup (some VCAPs do the processing of the lookups in parallel). The Sparx5 SoC has 6 different VCAP types: - IS0: Ingress Stage 0 (AKA CLM) mostly handles classification - IS2: Ingress Stage 2 mostly handles access control - IP6PFX: IPv6 prefix: Provides tables for IPV6 address management - LPM: Longest Path Match for IP guarding and routing - ES0: Egress Stage 0 is mostly used for CPU copying and multicast handling - ES2: Egress Stage 2 is known as the rewriter and mostly updates tags Design: ======= The VCAP implementation provides switchcore independent handling of rules and supports: - Creating and deleting rules - Updating and getting rules The platform specific API implementation as well as the platform specific model of the VCAP instances are attached to the VCAP API and a client can then access rules via the API in a platform independent way, with the limitations that each VCAP has in terms of is supported keys and actions. The VCAP model is generated from information delivered by the designers of the VCAP hardware. Here is an illustration of this: +------------------+ +------------------+ | TC flower filter | | PTP client | | for Sparx5 | | for Sparx5 | +-------------\----+ +---------/--------+ \ / \ / \ / \ / \ / +----v--------v----+ | VCAP API | +---------|--------+ | | | | +---------v--------+ | VCAP control | | instance | +----/--------|----+ / | / | / | / | +--------------v---+ +----v-------------+ | Sparx5 VCAP | | Sparx5 VCAP API | | model | | Implementation | +------------------+ +---------|--------+ | | | | +---------v--------+ | Sparx5 VCAP HW | +------------------+ Delivery: ========= For now only the IS2 is supported but later the IS0, ES0 and ES2 will be added. There are currently no plans to support the IP6PFX and the LPM VCAPs. The IS2 VCAP has 4 lookups and they are accessible with a TC chain id: - chain 8000000: IS2 Lookup 0 - chain 8100000: IS2 Lookup 1 - chain 8200000: IS2 Lookup 2 - chain 8300000: IS2 Lookup 3 These lookups are executed in parallel by the IS2 VCAP but the actions are executed in series (the datasheet explains what happens if actions overlap). The functionality of TC flower as well as TC matchall filters will be expanded in later submissions as well as the number of VCAPs supported. This is current plan: - add support for more TC flower filter keys and extend the Sparx5 port keyset configuration - support for TC protocol all - debugfs support for inspecting rules - TC flower filter statistics - Sparx5 IS0 VCAP support and more TC keys and actions to support this - add TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support and more TC actions to support this - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support The LAN966x switchcore will also be updated to use the VCAP API as well as future Microchip switches. The LAN966x has 3 VCAPS (IS1, IS2 and ES0) and a slightly different keyset and actionset portfolio than Sparx5. Version History: ================ v3 Moved the sparx5_tc_flower_set_exterr function to the VCAP API and renamed it. Moved the sparx5_netbytes_copy function to the VCAP_API and renamed it (thanks Horatiu Vultur). Fixed indentation in the vcap_write_rule function. Added a comment mentioning the typegroup table terminator in the vcap_iter_skip_tg function. v2 Made the KUNIT test model a superset of the real model to fix a kernel robot build error. v1 Initial version ==================== Signed-off-by: -
Steen Hegelund authored
This provides a KUNIT test suite for the VCAP APIs encoding functionality. The test can be run by adding these settings in a .kunitconfig file CONFIG_KUNIT=y CONFIG_NET=y CONFIG_VCAP_KUNIT_TEST=y Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
-
Steen Hegelund authored
This provides a test VCAP model for use in a KUNIT test. The model provides 3 different VCAP types for better test coverage. Signed-off-by:
-
Steen Hegelund authored
This adds rule encoding functionality to the VCAP API. A rule consists of keys and actions in separate cache sections. The maximum size of the keyset or actionset determines the size of the rule. The VCAP hardware need to be able to distinguish different rule sizes from each other, and for that purpose some extra typegroup bits are added to the rule when it is encoded. The API provides a bit stream iterator that allows highlevel encoding functionality to add key and action value bits independent of typegroup bits. This is handled by letting the concrete VCAP model provide the typegroup table for the different rule sizes. After the key and action values have been added to the encoding bit streams the typegroup bits are set to their correct values just before the rule is written to the VCAP hardware. The key and action offsets provided in the VCAP model are the offset before adding the typegroup bits. Signed-off-by:
Casper Andersson <casper.casan@gmail.com> Reviewed-by:
-
Steen Hegelund authored
This provides most of the rule handling needed to add a new rule to a VCAP. To add a rule a client must follow these steps: 1) Allocate a new rule (provide an id or get one automatically assigned) 2) Add keys to the rule 3) Add actions to the rule 4) Optionally set a keyset on the rule 5) Optionally set an actionset on the rule 6) Validate the rule (this will add keyset and actionset if not specified in the previous steps) 7) Add the rule (if the validation was successful) 8) Free the rule instance (a copy has been added to the VCAP) The validation step will fail if there are no keysets with the requested keys, or there are no actionsets with the requested actions. The validation will also fail if the keyset is not configured for the port for the requested protocol). Signed-off-by:
-
Steen Hegelund authored
This provides a default port keyset configuration for the Sparx5 IS2 VCAP where all ports and all lookups in IS2 use the same keyset (MAC_ETYPE) for all types of traffic. This means that no matter what frame type is received on any front port it will generate the MAC_ETYPE keyset in the IS VCAP and any rule in the IS2 VCAP that uses this keyset will be matched against the keys in the MAC_ETYPE keyset. The callback interface used by the VCAP API is populated with Sparx5 specific handler functions that takes care of the actual reading and writing to data to the Sparx5 IS2 VCAP instance. A few functions are also added to the VCAP API to support addition of rule fields such as the ingress port mask and the lookup bit. The IS2 VCAP in Sparx5 is really divided in two instances with lookup 0 and 1 in the first instance and lookup 2 and 3 in the second instance. The lookup bit selects lookup 0 or 3 in the respective instance when it is set. Signed-off-by:
-
Steen Hegelund authored
This adds initial TC flower filter support to Sparx5 for the IS2 VCAP. The support consists of the source and destination MAC addresses, and the trap and pass actions. This is how you can create a rule that test the functionality: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \ protocol all flower skip_sw \ dst_mac 0a:0b:0c:0d:0e:0f \ src_mac 2:0:0:0:0:1 \ action trap The IS2 chains in Sparx5 are assigned like this: - chain 8000000: IS2 Lookup 0 - chain 8100000: IS2 Lookup 1 - chain 8200000: IS2 Lookup 2 - chain 8300000: IS2 Lookup 3 Signed-off-by: -
Steen Hegelund authored
This adds the register interface needed to access the Sparx5 Ingress Stage 2 VCAP (IS2). The Sparx5 Chip Register Model can be browsed at this location: https://github.com/microchip-ung/sparx-5_reginfoSigned-off-by:
-
Steen Hegelund authored
This provides the Sparx5 Ingress Stage 2 (IS2) model and adds it to the VCAP control instance that will be provided to the VCAP API. The Sparx5 IS2 C code model is generated from the Sparx5 RTL design model. Signed-off-by:
-
Steen Hegelund authored
This provides the initial VCAP API framework and Sparx5 specific VCAP implementation. When the Sparx5 Switchdev driver is initialized it will also initialize its VCAP module, and this hooks up the concrete Sparx5 VCAP model to the VCAP API, so that the VCAP API knows what VCAP instances are available. Signed-off-by:
-
Yanguo Li authored
Support hardware offload when tunnel neigh out port is bond. These feature work with the nfp firmware. If the firmware supports the NFP_FL_FEATS_TUNNEL_NEIGH_LAG feature, nfp driver write the bond information to the firmware neighbor table or do nothing for bond. when neighbor MAC changes, nfp driver need to update the neighbor information too. Signed-off-by:
Yanguo Li <yanguo.li@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== inet6: Remove inet6_destroy_sock() calls. This is a follow-up series for commit d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."). This series cleans up unnecessary inet6_destory_sock() calls in sk->sk_prot->destroy() and call it from sk->sk_destruct() to make sure we do not leak memory related to IPv6 specific-resources. Changes: v2: * patch 1 * Fix build failure for CONFIG_MPTCP_IPV6=y v1: https://lore.kernel.org/netdev/20221018190956.1308-1-kuniyu@amazon.com/ ==================== Signed-off-by:
-
Kuniyuki Iwashima authored
We can reuse the unlock label above and need not repeat the same code. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock(). Let's rename inet6_destroy_sock() to inet6_cleanup_sock(). Signed-off-by:
-
Kuniyuki Iwashima authored
After commit d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and SCTPv6 socket reuses it as the init function. To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we set sctp_v6_destruct_sock() in a new init function. Signed-off-by:
-
Kuniyuki Iwashima authored
After commit d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and DCCPv6 socket shares it by calling the same init function via dccp_v6_init_sock(). To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we export it and set dccp_v6_sk_destruct() in the init function. Signed-off-by:
-
Kuniyuki Iwashima authored
After commit d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. Now we can remove unnecessary inet6_destroy_sock() calls in sk->sk_prot->destroy(). DCCP and SCTP have their own sk->sk_destruct() function, so we change them separately in the following patches. Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== net: dpaa2-eth: AF_XDP zero-copy support This patch set adds support for AF_XDP zero-copy in the dpaa2-eth driver. The support is available on the LX2160A SoC and its variants and only on interfaces (DPNIs) with a maximum of 8 queues (HW limitations are the root cause). We are first implementing the .get_channels() callback since this a dependency for further work. Patches 2-3 are working on making the necessary changes for multiple buffer pools on a single interface. By default, without an AF_XDP socket attached, only a single buffer pool will be used and shared between all the queues. The changes in the functions are made in this patch, but the actual allocation and setup of a new BP is done in patch#10. Patches 4-5 are improving the information exposed in debugfs. We are exposing a new file to show which buffer pool is used by what channels and how many buffers it currently has. The 6th patch updates the dpni_set_pools() firmware API so that we are capable of setting up a different buffer per queue in later patches. In the 7th patch the generic dev_open/close APIs are used instead of the dpaa2-eth internal ones. Patches 8-9 are rearranging the existing code in dpaa2-eth.c in order to create new functions which will be used in the XSK implementation in dpaa2-xsk.c Finally, the last 3 patches are adding the actual support for both the Rx and Tx path of AF_XDP zero-copy and some associated tracepoints. Details on the implementation can be found in the actual patch. Changes in v2: - 3/12: Export dpaa2_eth_allocate_dpbp/dpaa2_eth_free_dpbp in this patch to avoid a build warning. The functions will be used in next patches. - 6/12: Use __le16 instead of u16 for the dpbp_id field. - 12/12: Use xdp_buff->data_hard_start when tracing the BP seeding. Changes in v3: - 3/12: fix leaking of bp on error path ==================== Acked-by:
Björn Töpel <bjorn@kernel.org> Signed-off-by:
-
Robert-Ionut Alexa authored
Define the dpaa2_tx_xsk_fd and dpaa2_rx_xsk_fd trace events for the XSK zero-copy Rx and Tx path. Also, define the dpaa2_eth_buf as an event class so that both dpaa2_eth_buf_seed and dpaa2_xsk_buf_seed traces can derive from the same class. Signed-off-by:
Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Robert-Ionut Alexa authored
Add support in dpaa2-eth for packet processing on the Tx path using AF_XDP zero copy mode. The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx packets into the appropriate queue and update any necessary statistics. On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles creating a Scatter-Gather frame descriptor with only one data buffer. This is needed because otherwise we would need to impose a headroom in the Tx buffer to store our software annotation structures. This tactic is already used on the normal data path of the dpaa2-eth driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle functions in order to allocate and recycle the Scatter-Gather table buffers. In case we have reached the maximum number of Tx XSK packets to be sent in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be rescheduled again. On the XSK Tx confirmation path, we are just unmapping the SGT buffer and recycle it for further use. Signed-off-by:
-
Robert-Ionut Alexa authored
This patch adds the support for receiving packets via the AF_XDP zero-copy mechanism in the dpaa2-eth driver. The support is available only on the LX2160A SoC and variants because we are relying on the HW capability to associate a buffer pool to a specific queue (QDBIN), only available on newer WRIOP versions. On the control path, the dpaa2_xsk_enable_pool() function is responsible to allocate a buffer pool (BP), setup this new BP to be used only on the requested queue and change the consume function to point to the XSK ZC one. We are forced to call dev_close() in order to change the queue to buffer pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our favor since at dev_close() the buffer pools will be drained and at the later dev_open() call they will be again seeded, this time with buffers allocated from the XSK pool if needed. On the data path, a new software annotation type is defined to be used only for the XSK scenarios. This will enable us to pass keep necessary information about a packet buffer between the moment in which it was seeded and when it's received by the driver. In the XSK case, we are keeping the associated xdp_buff. Depending on the action returned by the BPF program, we will do the following: - XDP_PASS: copy the contents of the packet into a brand new skb, recycle the initial buffer. - XDP_TX: just enqueue the same frame descriptor back into the Tx path, the buffer will get automatically released into the initial BP. - XDP_REDIRECT: call xdp_do_redirect() and exit. Signed-off-by:
-
Robert-Ionut Alexa authored
Carve out code from the dpaa2_eth_rx() function in order to create and export the dpaa2_eth_receive_skb() function. Do this in order to reuse this code also from the XSK path which will be introduced in a later patch. Signed-off-by:
-
Robert-Ionut Alexa authored
The dpaa2_eth_alloc_skb() function is added by moving code from the dpaa2_eth_copybreak() previously defined function. What the new API does is to allocate a new skb, copy the frame data from the passed FD to the new skb and then return the skb. Export this new function since we'll need the this functionality also from the XSK code path. Signed-off-by:
-
Ioana Ciornei authored
Instead of calling the internal functions which implement .ndo_stop and .ndo_open, we can simply call dev_close and dev_open, so that we keep the code cleaner. Also, in the next patches we'll use the same APIs from other files without needing to export the internal functions. Signed-off-by:
-
Robert-Ionut Alexa authored
Update the dpni_set_pool() firmware API so that in the next patches we can configure per Rx queue (per QDBIN) buffer pools. This is a hard requirement of the AF_XDP, thus we need the newer API version. Signed-off-by:
-
Ioana Ciornei authored
Export the allocated buffer pools, the number of buffers that they have currently and which channels are using which BP. The output looks like below: Buffer pool info for eth2: IDX BPID Buf count CH#0 CH#1 CH#2 CH#3 BP#0 1 5124 x x x x Signed-off-by:
-
Ioana Ciornei authored
Just give out an index for each channel that we export into the debug file in the form of CH#<index>. This is purely to help corelate each channel information from one debugfs file to another one. Signed-off-by:
-
Robert-Ionut Alexa authored
This patch allows the configuration of multiple buffer pools associated with a single DPNI object, each distinct DPBP object not necessarily shared among all queues. The user can interogate both the number of buffer pools and the buffer count in each buffer pool by using the .get_ethtool_stats() callback. Signed-off-by:
-
Ioana Ciornei authored
Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so that we adhere to the reverse Christmas tree rule. Also, in the next patch we are adding more variables and I didn't know where to place them with the current ordering. Signed-off-by:
-
Robert-Ionut Alexa authored
The .get_channels() ethtool_ops callback is implemented and exports the number of queues: Rx, Tx, Tx conf and Rx err. The last two ones, Tx confirmation and Rx err, are counted as 'others'. The .set_channels() callback is not implemented since the DPAA2 software/firmware architecture does not allow the dynamic reconfiguration of the number of queues. Signed-off-by:
-
- 21 Oct, 2022 8 commits
-
-
Alexandru Tachici authored
Document GPIO for HW reset. Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Alexandru Tachici authored
Add an optional GPIO to be used for a hardware reset of the IC. Signed-off-by:
-
Jeff Johnson authored
Commit ff6d3658 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for IPA. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by:
-
Doug Berger authored
If a matching flow spec exists its current location is as good as ANY. If not add the new flow spec at the first available location. Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221019215123.316997-1-opendmb@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alexey Kodanev authored
After commit 178ca044 ("sctp: Make sctp_enqueue_event tak an skb list."), skb_list cannot be NULL. Detected using the static analysis tool - Svace. Signed-off-by:
Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20221019180735.161388-3-aleksei.kodanev@bell-sw.comSigned-off-by:
-
Alexey Kodanev authored
After commit 013b96ec ("sctp: Pass sk_buff_head explicitly to sctp_ulpq_tail_event().") there is one more unneeded check of skb_list for NULL. Detected using the static analysis tool - Svace. Signed-off-by:
-
Alexey Kodanev authored
'&asoc->ulpq' passed to sctp_ulpq_init() as the first argument, then sctp_qlpq_init() initializes it and eventually returns the address of the struct member back. Therefore, in this case, the return pointer cannot be NULL. Moreover, it seems sctp_ulpq_init() has always been used only in sctp_association_init(), so there's really no need to return ulpq anymore. Detected using the static analysis tool - Svace. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by:
-
