- 05 May, 2024 10 commits
-
-
David S. Miller authored
Shailend Chand says: ==================== gve: Implement queue api Following the discussion on https://patchwork.kernel.org/project/linux-media/patch/20240305020153.2787423-2-almasrymina@google.com/, the queue api defined by Mina is implemented for gve. The first patch is just Mina's introduction of the api. The rest of the patches make surgical changes in gve to enable it to work correctly with only a subset of queues present (thus far it had assumed that either all queues are up or all are down). The final patch has the api implementation. Changes since v1: clang warning fixes, kdoc warning fix, and addressed review comments. ==================== Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shailend Chand authored
Every tx and rx ring has its own queue-page-list (QPL) that serves as the bounce buffer. Previously we were allocating QPLs for all queues before the queues themselves were allocated and later associating a QPL with a queue. This is avoidable complexity: it is much more natural for each queue to allocate and free its own QPL. Moreover, the advent of new queue-manipulating ndo hooks make it hard to keep things as is: we would need to transfer a QPL from an old queue to a new queue, and that is unpleasant. Tested-by:
Mina Almasry <almasrymina@google.com> Reviewed-by:
Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by:
Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by:
Shailend Chand <shailend@google.com> Signed-off-by:
-
Shailend Chand authored
We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array. Tested-by:
-
Shailend Chand authored
This does not fix any existing bug. In anticipation of the ndo queue api hooks that alloc/free/start/stop a single Rx queue, the already existing per-queue stop functions are being made more robust. Specifically for this use case: rx_queue_n.stop() + rx_queue_n.start() Note that this is not the use case being used in devmem tcp (the first place these new ndo hooks would be used). There the usecase is: new_queue.alloc() + old_queue.stop() + new_queue.start() + old_queue.free() Tested-by:
-
Shailend Chand authored
In order to make possible the implementation of per-queue ndo hooks, gve_turnup was changed in a previous patch to account for queues already having some unprocessed descriptors: it does a one-off napi_schdule to handle them. If conditions of consistent high traffic persist in the immediate aftermath of this, the poll routine for a queue can be "stuck" on the cpu on which the ndo hooks ran, instead of the cpu its irq has affinity with. This situation is exacerbated by the fact that the ndo hooks for all the queues are invoked on the same cpu, potentially causing all the napi poll routines to be residing on the same cpu. A self correcting mechanism in the poll method itself solves this problem. Tested-by:
-
Shailend Chand authored
gVNIC has a requirement that all queues have to be quiesced before any queue is operated on (created or destroyed). To enable the implementation of future ndo hooks that work on a single queue, we need to evolve gve_turnup to account for queues already having some unprocessed descriptors in the ring. Say rxq 4 is being stopped and started via the queue api. Due to gve's requirement of quiescence, queues 0 through 3 are not processing their rings while queue 4 is being toggled. Once they are made live, these queues need to be poked to cause them to check their rings for descriptors that were written during their brief period of quiescence. Tested-by:
-
Shailend Chand authored
Currently the queues are either all live or all dead, toggling from one state to the other via the ndo open and stop hooks. The future addition of single-queue ndo hooks changes this, and thus gve_turnup and gve_turndown should evolve to account for a state where some queues are live and some aren't. Tested-by:
-
Shailend Chand authored
This allows for implementing future ndo hooks that act on a single queue. Tested-by:
-
Shailend Chand authored
Although this is not fixing any existing double free bug, making these functions idempotent allows for a simpler implementation of future ndo hooks that act on a single queue. Tested-by:
-
Mina Almasry authored
This API enables the net stack to reset the queues used for devmem TCP. Signed-off-by:
-
- 03 May, 2024 22 commits
-
-
Mina Almasry authored
This reverts commit a580ea99. This revert is to resolve Dragos's report of page_pool leak here: https://lore.kernel.org/lkml/20240424165646.1625690-2-dtatulea@nvidia.com/ The reverted patch interacts very badly with commit 2cc3aeb5 ("skbuff: Fix a potential race while recycling page_pool packets"). The reverted commit hopes that the pp_recycle + is_pp_page variables do not change between the skb_frag_ref and skb_frag_unref operation. If such a change occurs, the skb_frag_ref/unref will not operate on the same reference type. In the case of Dragos's report, the grabbed ref was a pp ref, but the unref was a page ref, because the pp_recycle setting on the skb was changed. Attempting to fix this issue on the fly is risky. Lets revert and I hope to reland this with better understanding and testing to ensure we don't regress some edge case while streamlining skb reffing. Fixes: a580ea99 ("net: mirror skb frag ref/unref helpers") Reported-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Wei authored
Current net-next/main does not boot for older chipsets e.g. Stratus. Sample dmesg: [ 11.368315] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Able to reserve only 0 out of 9 requested RX rings [ 11.390181] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Unable to reserve tx rings [ 11.438780] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): 2nd rings reservation failed. [ 11.487559] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Not enough rings available. [ 11.506012] bnxt_en 0000:02:00.0: probe with driver bnxt_en failed with error -12 This is caused by bnxt_get_avail_msix() returning a negative value for these chipsets not using the new resource manager i.e. !BNXT_NEW_RM. This in turn causes hwr.cp in __bnxt_reserve_rings() to be set to 0. In the current call stack, __bnxt_reserve_rings() is called from bnxt_set_dflt_rings() before bnxt_init_int_mode(). Therefore, bp->total_irqs is always 0 and for !BNXT_NEW_RM bnxt_get_avail_msix() always returns a negative number. Historically, MSIX vectors were requested by the RoCE driver during run-time and bnxt_get_avail_msix() was used for this purpose. Today, RoCE MSIX vectors are statically allocated. bnxt_get_avail_msix() should only be called for the BNXT_NEW_RM() case to reserve the MSIX ahead of time for RoCE use. bnxt_get_avail_msix() is also be simplified to handle the BNXT_NEW_RM() case only. Fixes: d630624e ("bnxt_en: Utilize ulp client resources if RoCE is not registered") Signed-off-by:
David Wei <dw@davidwei.uk> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240502203757.3761827-1-dw@davidwei.ukSigned-off-by:
-
Eric Dumazet authored
dev->threaded can be read locklessly, if we add corresponding READ_ONCE()/WRITE_ONCE() annotations. Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240502173926.2010646-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
I often forget the exact naming of ops and have to look at the spec to find it. Add support for listing the operations: $ ./cli.py --spec .../netdev.yaml --list-ops dev-get [ do, dump ] page-pool-get [ do, dump ] page-pool-stats-get [ do, dump ] queue-get [ do, dump ] napi-get [ do, dump ] qstats-get [ dump ] For completeness also support listing all ops (including notifications: # ./cli.py --spec .../netdev.yaml --list-msgs dev-get [ dump, do ] dev-add-ntf [ notify ] dev-del-ntf [ notify ] dev-change-ntf [ notify ] page-pool-get [ dump, do ] page-pool-add-ntf [ notify ] page-pool-del-ntf [ notify ] page-pool-change-ntf [ notify ] page-pool-stats-get [ dump, do ] queue-get [ dump, do ] napi-get [ dump, do ] qstats-get [ dump ] Use double space after the name for slightly easier to read output. Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== rtnetlink: rtnl_stats_dump() changes Getting rid of RTNL in rtnl_stats_dump() looks challenging. In the meantime, we can: 1) Avoid RTNL acquisition for the final NLMSG_DONE marker. 2) Use for_each_netdev_dump() instead of the net->dev_index_head[] hash table. ==================== Link: https://lore.kernel.org/r/20240502113748.1622637-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Switch rtnl_stats_dump() to use for_each_netdev_dump() instead of net->dev_index_head[] hash table. This makes the code much easier to read, and fixes scalability issues. Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240502113748.1622637-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
By returning 0 (or an error) instead of skb->len, we allow NLMSG_DONE to be appended to the current skb at the end of a dump, saving a couple of recvmsg() system calls. Signed-off-by:
-
David S. Miller authored
Joel Granados says: ==================== sysctl: Remove sentinel elements from networking What? These commits remove the sentinel element (last empty element) from the sysctl arrays of all the files under the "net/" directory that register a sysctl array. The merging of the preparation patches [4] to mainline allows us to just remove sentinel elements without changing behavior. This is safe because the sysctl registration code (register_sysctl() and friends) use the array size in addition to checking for a sentinel [1]. Why? By removing the sysctl sentinel elements we avoid kernel bloat as ctl_table arrays get moved out of kernel/sysctl.c into their own respective subsystems. This move was started long ago to avoid merge conflicts; the sentinel removal bit came after Mathew Wilcox suggested it to avoid bloating the kernel by one element as arrays moved out. This patchset will reduce the overall build time size of the kernel and run time memory bloat by about ~64 bytes per declared ctl_table array (more info here [5]). When are we done? There are 4 patchest (25 commits [2]) that are still outstanding to completely remove the sentinels: files under "net/" (this patchset), files under "kernel/" dir, misc dirs (files under mm/ security/ and others) and the final set that removes the unneeded check for ->procname == NULL. Testing: * Ran sysctl selftests (./tools/testing/selftests/sysctl/sysctl.sh) * Ran this through 0-day with no errors or warnings Savings in vmlinux: A total of 64 bytes per sentinel is saved after removal; I measured in x86_64 to give an idea of the aggregated savings. The actual savings will depend on individual kernel configuration. * bloat-o-meter - The "yesall" config saves 3976 bytes (bloat-o-meter output [6]) - A reduced config [3] saves 1263 bytes (bloat-o-meter output [7]) Savings in allocated memory: None in this set but will occur when the superfluous allocations are removed from proc_sysctl.c. I include it here for context. The estimated savings during boot for config [3] are 6272 bytes. See [8] for how to measure it. Comments/feedback greatly appreciated Changes in v6: - Rebased onto net-next/main. - Besides re-running my cocci scripts, I ran a new find script [9]. Found 0 hits in net/ - Moved "i" variable declaraction out of for() in sysctl_core_net_init - Removed forgotten sentinel in mpls_table - Removed CONFIG_AX25_DAMA_SLAVE guard from net/ax25/ax25_ds_timer.c. It is not needed because that file is compiled only when CONFIG_AX25_DAMA_SLAVE is set. - When traversing smc_table, stop on ARRAY_SIZE instead of ARRAY_SIZE-1. - Link to v5: https://lore.kernel.org/r/20240426-jag-sysctl_remset_net-v5-0-e3b12f6111a6@samsung.com Changes in v5: - Added net files with additional variable to my test .config so the typo can be caught next time. - Fixed typo tabel_size -> table_size - Link to v4: https://lore.kernel.org/r/20240425-jag-sysctl_remset_net-v4-0-9e82f985777d@samsung.com Changes in v4: - Keep reverse xmas tree order when introducing new variables - Use a table_size variable to keep the value of ARRAY_SIZE - Separated the original "networking: Remove the now superfluous sentinel elements from ctl_table arra" into smaller commits to ease review - Merged x.25 and ax.25 commits together. - Removed any SOB from the commits that were changed - Link to v3: https://lore.kernel.org/r/20240412-jag-sysctl_remset_net-v3-0-11187d13c211@samsung.com Changes in v3: - Reworkded ax.25 - Added a BUILD_BUG_ON for the ax.25 commit - Added a CONFIG_AX25_DAMA_SLAVE guard where needed - Link to v2: https://lore.kernel.org/r/20240328-jag-sysctl_remset_net-v2-0-52c9fad9a1af@samsung.com Changes in v2: - Rebased to v6.9-rc1 - Removed unneeded comment from sysctl_net_ax25.c - Link to v1: https://lore.kernel.org/r/20240314-jag-sysctl_remset_net-v1-0-aa26b44d29d9@samsung.com ==================== Signed-off-by: -
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Avoid a buffer overflow when traversing the ctl_table by ensuring that AX25_MAX_VALUES is the same as the size of ax25_param_table. This is done with a BUILD_BUG_ON where ax25_param_table is defined and a CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as in the ax25_dev_device_up and ax25_ds_set_timer functions. The overflow happened when the sentinel was removed from ax25_param_table. The sentinel's data element was changed when CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it still stopped on the sentinel's null procname but needed to be addressed once the sentinel was removed. Signed-off-by:
Joel Granados <j.granados@samsung.com> Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from atalk_table ctl_table array. Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel elements from ctl_table structs * Remove instances where an array element is zeroed out to make it look like a sentinel. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration * Remove the need for having __NF_SYSCTL_CT_LAST_SYSCTL as the sysctl array size is now in NF_SYSCTL_CT_LAST_SYSCTL * Remove extra element in ctl_table arrays declarations Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) To avoid lots of small commits, this commit brings together network changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and NETWORKING [IPSEC] * Remove sentinel element from ctl_table structs. * Replace empty array registration with the register_net_sysctl_sz call in llc_sysctl_init * Replace the for loop stop condition that tests for procname == NULL with one that depends on array size in sctp_sysctl_net_register * Remove instances where an array element is zeroed out to make it look like a sentinel in xfrm_sysctl_init. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init. This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Remove extra sentinel element in the declaration of devinet_vars. * Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init, ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having an extra empty element when looping over ctl_table arrays * Replace the for loop stop condition in __addrconf_sysctl_register that tests for procname == NULL with one that depends on array size * Removing the unprivileged user check in ipv6_route_sysctl_init is safe as it is replaced by calling ipv6_route_sysctl_table_size; introduced in commit c899710f ("networking: Update to register_net_sysctl_sz") * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Joel Granados authored
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in neigh_sysctl_register and lowpan_frags_ns_sysctl_register This is not longer needed and is safe after commit c899710f ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Replace the for loop stop condition in sysctl_core_net_init that tests for procname == NULL with one that depends on array size * Removed the "-1" in mpls_net_init that adjusted for having an extra empty element when looping over ctl_table arrays * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by:
-
Eric Dumazet authored
sfq_perturbation() reads q->perturb_period locklessly. Add annotations to fix potential issues. Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430180015.3111398-1-edumazet@google.comSigned-off-by:
-
Simon Horman authored
Since commit a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Willem de Bruijn authored
Detect packets with ip_summed CHECKSUM_PARTIAL and skip these. These should not exist, as the test sends individual packets between two hosts. But if (HW) GRO is on, with randomized content sometimes subsequent packets can be coalesced. In this case the GSO packet checksum is converted to a pseudo checksum in anticipation of sending out as TSO/USO. So the field will not match the expected value. Do not count these as test errors. Signed-off-by:
-
Jakub Kicinski authored
We're a bit too loose with error checking for background processes. cmd() completely ignores the fail argument passed to the constructor if background is True. Default to checking for errors if process is not terminated explicitly. Caller can override with True / False. For bkg() the processing step is called magically by __exit__ so record the value passed in the constructor. Reported-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct hfi1_netdev_rx by converting it into a pointer. Then use the leverage alloc_netdev() to allocate the net_device object at hfi1_alloc_rx(). [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Acked-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
Leon Romanovsky <leon@kernel.org> Link: https://lore.kernel.org/r/20240430162213.746492-1-leitao@debian.orgSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Use flow_rule_is_supp_control_flags() to reject filters with unsupported control flags. In case any unsupported control flags are masked, flow_rule_is_supp_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Remove FLOW_DIS_FIRST_FRAG specific error message, and treat it as any other unsupported control flag. Only compile-tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240422152728.175677-1-ast@fiberby.netSigned-off-by:
-
- 02 May, 2024 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b61 ("bpf: verifier: prevent userspace memory access") d503a04f ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/ No adjacent changes. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ... -
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Updates for net-next The first patch converts the sw_stats field in the completion ring structure to a pointer. This allows the group of completion rings using the same MSIX to share the same sw_stats structure. Prior to this, the correct completion ring must be used to count packets. The next four patches remove the RTNL lock when calling the RoCE driver for asynchronous stop and start during error recovery and firmware reset. The RTNL ilock is replaced with a private mutex used to synchronize RoCE register, unregister, stop, and start. The last patch adds VF PCI IDs for the 5760X chips. v2: Dropped patch #1 from v1. Will work with David to get that patch in separately. ==================== Link: https://lore.kernel.org/r/20240501003056.100607-1-michael.chan@broadcom.comSigned-off-by:
-
Ajit Khaparde authored
No driver logic changes are required to support the VFs, so just add the VF PCI ID. Reviewed-by:
Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
-
Kalesh AP authored
In the error recovery path (AER, firmware recovery, etc), the driver notifies the RoCE driver via ULP_STOP before the reset and via ULP_START after the reset, all under RTNL_LOCK. The RoCE driver can take a long time if there are a lot of QPs to destroy, so it is not ideal to hold the global RTNL lock. Rely on the new en_dev_lock mutex instead for ULP_STOP and ULP_START. For the most part, we move the ULP_STOP call before we take the RTNL lock and move the ULP_START after RTNL unlock. Note that SRIOV re-enablement must be done after ULP_START or RoCE on the VFs will not resume properly after reset. The one scenario in bnxt_hwrm_if_change() where the RTNL lock is already taken in the .ndo_open() context requires the ULP restart to be deferred to the bnxt_sp_task() workqueue. Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Kalesh AP authored
The current scheme relies heavily on the RTNL lock for all ULP operations between the L2 and the RoCE driver. Add a new en_dev_lock mutex so that the asynchronous ULP_STOP and ULP_START operations can be serialized with bnxt_register_dev() and bnxt_unregister_dev() calls without relying on the RTNL lock. The next patch will remove the RTNL lock from the ULP_STOP and ULP_START calls. Reviewed-by:
-
Michael Chan authored
There is no need to call ULP_STOP and ULP_START before and after the L2 reset in bnxt_reset_task(). This L2 reset is done after detecting TX timeout, RX ring errors, or VF config changes. The L2 reset does not affect RoCE since the firmware is not reset and the backing store is left alone. Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by:
-
Kalesh AP authored
Offline self test is a very disruptive operation for RoCE and requires all active QPs to be destroyed. With a large number of QPs, it can take a long time to destroy all the QPs and can timeout. Do not allow ethtool offline self test if the RoCE driver is registered on the device. Reviewed-by:
-
