- 16 Nov, 2007 40 commits
-
-
Greg Kroah-Hartman authored
-
Alexey Starikovskiy authored
commit 1dbc1fda in mainline. ACPI: suspend: Wrong order of GPE restore. acpi_leave_sleep_state() should have correct list of wake and runtime GPEs, which is available only after disable_wakeup_device() is called. [cebbert@redhat.com: backport to 2.6.23] Signed-off-by:
Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
Len Brown <len.brown@intel.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alexey Starikovskiy authored
patch is 9c1c6a1b in mainline. ACPI: sleep: Fix GPE suspend cleanup Commit 9b039330 removed acpi_gpe_sleep_prepare(), the only function used at S5 transition Add call to generic acpi_enable_wake_device(). Reference: https://bugzilla.novell.com/show_bug.cgi?id=299882Signed-off-by:
-
Tejun Heo authored
Differs from mainline, but the functionality is already there. P5W-DH Deluxe has ICH7R which doesn't have PMP support but SIMG 4726 hardwired to the second port of AHCI controller at PCI device 1f.2. The 4726 doesn't work as PMP but as a storage processor which can do hardware RAID on downstream ports. When no device is attached to the downstream port of the 4726, pseudo ATA device for configuration appears. Unfortunately, ATA emulation on the device is very lousy and causes long hang during boot. This patch implements workaround for the board. If the mainboard is P5W-DH Deluxe (matched using DMI), only hardreset is used on the second port of AHCI controller @ 1f.2 and the hardreset doesn't depend on receiving the first FIS and just proceed to IDENTIFY. This workaround fixes bugzilla #8923. http://bugzilla.kernel.org/show_bug.cgi?id=8923Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Tejun Heo authored
Differs from mainline, but the functionality is already there. Backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA. These are originally link flags (ATA_LFLAG_*) but link abstraction doesn't exist on 2.6.23, so make it port flags. This is for the following workaround for ASUS P5W DH Deluxe. These new flags don't introduce any behavior change unless set and nobody sets them yet. Signed-off-by:
-
Tejun Heo authored
patch e14cbfa6 in mainline. Another one doing spurious NCQ completions. Blacklist it. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Dave Airlie authored
Upstream as 7fc86860 This code relied on the CPU and GPU address for the aperture being the same, On some r5xx hardware I was playing with I noticed that this isn't always true. This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957) Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jiri Slaby authored
patch c4342205 in mainline. moxa, fix and optimise empty timer don't wait and delete empty timer in empty timer function. Also fire next empty timer at rounded jiffies to save power. This fixes a lockup, because we wait for ourselves to finish forever. (i.e. sync called from the timer itself). Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
patch ac6aec2f in mainline. - register_device unconditionally (non-pci dependent) to have also isa devices in /dev - unregister devices on module removal - don't set TTY_DRIVER_DYNAMIC_DEV twice (removed the one dependent on some macro) This is the substantial part of the patch and the previous point is for not checking which devices to unregister and which not (simply register and unregister all found no matter on which bus they are plugged). Signed-off-by:
-
HighPoint Linux Team authored
patch 0fec02c9 in mainline. avoid buffer overflow when returning sense data. With current adapter firmware the driver is working but future firmware updates may return sense data larger than 96 bytes, causing overflow on scp->sense_buffer and a kernel crash. This fix should be backported to earlier kernels. Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
patch 15d8061b in mainline. The cs5535 uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
patch a87a87cc in mainline. The siimage uses an incorrect construct to access the other drive of a pair, causing it to access beyond an array boundary on the secondary interface. This fixes it by using the new ide_get_paired_drive() helper instead. Bart: patch description fixes Signed-off-by:
-
Benjamin Herrenschmidt authored
patch 1b678347 in mainline. This adds a helper to get to the "other" drive on a pair connected to a given hwif. Signed-off-by:
-
Tony Battersby authored
patch 0c824b51 in mainline. The patch described by the following excerpt from ChangeLog-2.6.22 makes it impossible to use UDMA on a Tyan S2707 motherboard (SvrWks CSB5): commit 2d5eaa6d Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Thu May 10 00:01:08 2007 +0200 ide: rework the code for selecting the best DMA transfer mode (v3) ... This one-line patch against 2.6.23 fixes the problem. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Karsten Keil authored
patch 9713d9e6 in mainline. This fix the same issue which was debbuged for the C4 controller for the B1 versions. The capilib_ function modify or traverse a linked list without locking. This patch extends the existing locking to the calls of these function to prevent access to a list which is in the middle of a modification. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Karsten Keil authored
patch 1ccfd633 in mainline. The patch - Includes the call to capilib_data_b3_req in the spinlock. This routine in turn calls the offending mq_enqueue routine that triggered the freeze if not locked. This should also fix other indicators of incosistent capilib_msgidqueue list, that trigger messages like: Oct 5 03:05:57 BERL0 kernel: kcapi: msgid 3019 ncci 0x30301 not on queue that we saw several times a day (usually several in a row). - Fixes all occurrences of c4_dispatch_tx to be called with active spinlock, there were some instances where no lock was active. Mostly these are in very infrequently called routines, so the additional performance penalty is minimal. Signed-off-by:
Rainer Brestan <rainer.brestan@frequentis.com> Signed-off-by:
Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by:
-
Takashi Iwai authored
patch f6e9852a in mainline. [ALSA] hda-codec - Add array terminator for dmic in STAC codec Reported by Jan-Marek Glogowski. The dmic array is passed to snd_hda_parse_pin_def_config() and should be zero-terminated. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jiri Kosina authored
patch acd2a847 in mainline. USB: usbserial - fix potential deadlock between write() and IRQ usb_serial_generic_write() doesn't disable interrupts when taking port->lock, and could therefore deadlock with usb_serial_generic_read_bulk_callback() being called from interrupt, taking the same lock. Fix it. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Larry Finger <larry.finger@lwfinger.net> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Oliver Neukum authored
patch 0b28baaf in mainline. URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that use that flag. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Alan Stern authored
patch 32fe0198 in mainline. This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by:
-
Benedikt Spranger authored
patch 5395353e in mainline. Fix a longstanding race in the Ethernet gadget driver, which can cause an oops on device disconnect. The fix is just to make the TX path check whether its freelist is empty. That check is otherwise not necessary, since the queue is always stopped when that list empties (and restarted when request completion puts an entry back on that freelist). The race window starts when the network code decides to transmit a packet, and ends when hard_start_xmit() grabs the freelist lock. When disconnect() is called inside that window, it shuts down the TX queue and breaks the otherwise-solid assumption that packets are never sent through a TX queue that's stopped. Signed-off-by:
Benedikt Spranger <bene@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Alan Stern authored
patch a691efa9 in mainline. This patch (as995) cleans up the remains of the former NO_AUTOSUSPEND quirk. Since autosuspend is disabled by default, we will let userspace worry about which devices can safely be suspended. Thus the lengthy series of quirk entries is no longer needed, and neither is the quirk ID. I suppose someone might eventually run across a hub that can't be suspended; let's ignore the possibility for now. The patch also cleans up the hasty way in which autosuspend gets disabled. Setting udev->autosuspend_delay to -1 wasn't quite right, because the value is always supposed to be a multiple of HZ. It's better to leave the delay value alone and set autosuspend_disabled, which is what the quirk routine used to do. Signed-off-by:
-
Roland Dreier authored
patch cbf5d9e6 in mainline. While reading the MSI code trying to find a reason why MSI wouldn't work for devices that have a 32-bit MSI address capability, I noticed that read_msi_msg() seems to read the message data from the wrong offset in this case. Signed-off-by:
Roland Dreier <roland@digitalvampire.org> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Dan Williams authored
raid5: fix clearing of biofill operations This is the correct merge of the two upstream patches for this issue (it was mis-merged...) ops_complete_biofill() runs outside of spin_lock(&sh->lock) and clears the 'pending' and 'ack' bits. Since the test_and_ack_op() macro only checks against 'complete' it can get an inconsistent snapshot of pending work. Move the clearing of these bits to handle_stripe5(), under the lock. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Tested-by:
Joel Bertrand <joel.bertrand@systella.fr> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
patch 85bfb4da in mainline. As page->index is unsigned, this all becomes an unsigned comparison, which almost always returns an error. Signed-off-by:
-
Jun'ichi Nomura authored
patch ae9da83f in mainline. This patch fixes a bd_mount_sem counter corruption bug in device-mapper. thaw_bdev() should be called only when freeze_bdev() was called for the device. Otherwise, thaw_bdev() will up bd_mount_sem and corrupt the semaphore counter. struct block_device with the corrupted semaphore may remain in slab cache and be reused later. Attached patch will fix it by calling unlock_fs() instead. unlock_fs() will determine whether it should call thaw_bdev() by checking the device is frozen or not. Easy reproducer is: #!/bin/sh while [ 1 ]; do dmsetup --notable create a dmsetup --nolockfs suspend a dmsetup remove a done It's not easy to see the effect of corrupted semaphore. So I have tested with putting printk below in bdev_alloc_inode(): if (atomic_read(&ei->bdev.bd_mount_sem.count) != 1) printk(KERN_DEBUG "Incorrect semaphore count = %d (%p)\n", atomic_read(&ei->bdev.bd_mount_sem.count), &ei->bdev); Without the patch, I saw something like: Incorrect semaphore count = 17 (f2ab91c0) With the patch, the message didn't appear. The bug was introduced in 2.6.16 with this bug fix: commit d9dde59b Date: Fri Feb 24 13:04:24 2006 -0800 [PATCH] dm: missing bdput/thaw_bdev at removal Need to unfreeze and release bdev otherwise the bdev inode with inconsistent state is reused later and cause problem. and backported to 2.6.15.5. It occurs only in free_dev(), which is called only when the dm device is removed. The buggy code is executed only if md->suspended_bdev is non-NULL and that can happen only when the device was suspended without noflush. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Milan Broz authored
patch 79662d1e in mainline. Fix missing space in dm-delay target status output if separate read and write delay are configured. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Tejun Heo authored
Synchronize NCQ blacklist with the current upstream. Based on changes already in Linus's 2.6.24-rc kernel tree. Signed-off-by:
-
Takashi Iwai authored
patch 2a3988f6 in mainline. Fix zero-division bug in the calculation dds offset. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: Maarten Bressers <mbressers@gmail.com> Cc: gentoo kernel <kernel@gentoo.org> Signed-off-by:
-
Takashi Iwai authored
patch 7583cb51 from mainline. [ALSA] emu10k1 - Fix memory corruption The number of mixer elements for SPDIF control don't match with the actual array size (3). This may result in a memory corruption that overwrites the i2c_capture_source field (ALSA bug#3095). Signed-off-by:
-
Takashi Iwai authored
patch 8f11551b in mainline [ALSA] Fix build error without CONFIG_HAS_DMA The recent change of include/asm-generic/dma-mapping-broken.h breaks the build without CONFIG_HAS_DMA. This patch is an ad hoc fix. Signed-off-by:
-
Russ Cox authored
patch 38977e96 in mainline. [ALSA] fix selector unit bug affecting some USB speakerphones Following the suggestion in this thread: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/26683 the correct upper bound on desc[0] is 5 + num_ins not 6 + num_ins, because the index used later is 5+i, not 6+i. This change makes my Vosky Chatterbox speakerphone work. Apparently it also helps with the Minivox MV100. Signed-off-by:
Russ Cox <rsc@swtch.com> Signed-off-by:
-
Takashi Iwai authored
patch c480f79b in mainline [ALSA] hda-codec - Avoid zero NID in line_out_pins[] of STAC codecs The STAC codes adds line_out_pins[] for shared mic/line-inputs accordingly. But, the current code may give a hole with NID=0 in some setting, which results in an error at probe. This patch fixes the problem. Signed-off-by:
-
Roland Dreier authored
Upstream as 76d7cc03 Firmware commands are sent to the HCA by writing multiple words to a command register block. Access to this block of registers is serialized with a mutex. However, on large SGI systems, problems were seen with multiple CPUs issuing FW commands at the same time, because the writes to the register block may be reordered within the system interconnect and reach the HCA in a different order than they were issued (even with the mutex). Fix this by adding an mmiowb() before dropping the mutex. Tested-by:
Arthur Kepner <akepner@sgi.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Roland Dreier authored
Upstream as cbfb50e6 Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex") rewrote how userspace objects are looked up in the uverbs module's idrs, and introduced a severe bug in the process: there is no checking that an operation is being performed by the right process any more. Fix this by adding the missing check of uobj->context in __idr_get_uobj(). Apparently everyone is being very careful to only touch their own objects, because this bug was introduced in June 2006 in 2.6.18, and has gone undetected until now. Signed-off-by:
-
Jean Delvare authored
Already in Linus' tree: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=889af3d5d9586db795a06c619e416b4baee11da8 A stupid bit shifting bug caused the VID value to be always exported even when the hardware is configured for something different. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by:
-
Jean Delvare authored
Already in Linus' tree: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=b965d4b7f614522170af6a7e450be0333792ccd2 Missing parentheses in the definition of FAN_FROM_REG cause a division by zero for a specific register value. Signed-off-by:
Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by:
-
Jean Delvare authored
Already in Linus' tree: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d58df9cd788e6fb4962e1c8d5ba7b8b95d639a44 The bank switching code assumes that the bank selector is set to 0 when the driver is loaded. This might not be the case. This is exactly the same bug as was fixed in the w83627ehf driver two months ago: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0956895aa6f8dc6a33210967252fd7787652537d In practice, this bug was causing the sensor thermal types to be improperly reported for my W83627THF the first time I was loading the w83627hf driver. From the driver history, I'd say that it has been broken since September 2005 (when we stopped resetting the chip by default at driver load.) Signed-off-by:
-
Jean Delvare authored
Already in Linus' tree: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=c09c5184a26158da32801e89d5849d774605f0dd We need to read the fan clock dividers at initialization time, otherwise the code in store_fan_min() may use uninitialized values. That's pretty much the same bug and same fix as for the w83627ehf driver last month. Signed-off-by:
-
Dave Airlie authored
This is upstream as 54583bf4 Oops... Signed-off-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
