- 21 Sep, 2015 11 commits
-
-
Lukas Wunner authored
commit 69f92f67 upstream. Commit 92122789 ("drm/i915: preserve SSC if previously set v3") added code to intel_modeset_gem_init to override the SSC status read from VBT with the SSC status set by BIOS. However, intel_modeset_gem_init is invoked *after* intel_modeset_init, which calls intel_setup_outputs, which *modifies* SSC status by way of intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init doesn't preserve the SSC status set by BIOS but whatever intel_init_pch_refclk decided on. This is a problem on dual gpu laptops such as the MacBook Pro which require either a handler to switch DDC lines, or the discrete gpu to proxy DDC/AUX communication: Both the handler and the discrete gpu may initialize after the i915 driver, and consequently, an LVDS connector may initially seem disconnected and the SSC therefore is disabled by intel_init_pch_refclk, but on reprobe the connector may turn out to be connected and the SSC must then be enabled. Due to 92122789 however, the SSC is not enabled on reprobe since it is assumed BIOS disabled it while in fact it was disabled by intel_init_pch_refclk. Also, because the SSC status is preserved so late, the preserved value only ever gets used on resume but not on panel initialization: intel_modeset_init calls intel_init_display which indirectly calls intel_panel_use_ssc via multiple subroutines, *before* the BIOS value overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc is the sole user of dev_priv->vbt.lvds_use_ssc). Fix this by moving the code introduced by 92122789 from intel_modeset_gem_init to intel_modeset_init before the invocation of intel_setup_outputs and intel_init_display. Add a DRM_DEBUG_KMS as suggested way back by Jani: http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by:
William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by:
Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by:
Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress] Fixes: 92122789 ("drm/i915: preserve SSC if previously set v3") Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 86b7709d upstream. Support for output_csc is only available on DCE5 and newer so don't mess with the HDMI quantization_range on pre-DCE5 asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=83226Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 7040c399 upstream. AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Port of: drm/radeon/atom: Send out the full AUX address to radeon non-atom aux path Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Ville Syrjälä authored
commit 3f8340cc upstream. AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit d14e7b6d upstream. We are no longer checkling the DP link status on long hpd. We used to do that from the .hot_plug() handler, but it was removed when MST got introduced. If there's no userspace we now fail to retrain the link if the sink power is toggled (or cable yanked and replugged), meaning the user is left staring at a blank screen. With the retraining put back that should be fixed. Also remove the leftover comment that referred to the old retraining from .hot_plug(). Fixes a regression introduced in: commit 0e32b39c Author: Dave Airlie <airlied@redhat.com> Date: Fri May 2 14:02:48 2014 +1000 drm/i915: add DP 1.2 MST support (v0.7) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453Tested-by:
Palmer Dabbelt <palmer@dabbelt.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641 Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Imre Deak authored
commit 54875571 upstream. commit da2bc1b9 Author: Imre Deak <imre.deak@intel.com> Date: Thu Oct 23 19:23:26 2014 +0300 drm/i915: add poweroff_late handler introduced a regression on old platforms during hibernation. A workaround was added in commit ab3be73f Author: Imre Deak <imre.deak@intel.com> Date: Mon Mar 2 13:04:41 2015 +0200 drm/i915: gen4: work around hang during hibernation using an explicit blacklist for the GENs/BIOS vendors where the issue was reported. Later there we had reports of the same failure on platforms not on this list. To my best knowledge the correct thing to do is still to put the device to PCI D3 state during hibernation, see [1] and [2] for the reasons. This also aligns with our future plans to unify more the runtime and system suspend/resume paths. Since an exact blacklist seems to be impractical (multiple GENs and BIOS vendors are affected) apply the workaround on everything pre GEN6. [1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html [2] https://lkml.org/lkml/2015/6/22/274 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061Reported-by:
Ilya Tumaykin <itumaykin@gmail.com> Reported-by:
Dirk Griesbach <spamthis@freenet.de> Reported-by:
Pavel Machek <pavel@ucw.cz> Reported-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Tested-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Stephen Chandler Paul authored
commit 924f92bf upstream. Most of the time this isn't an issue since hotplugging an adaptor will trigger a crtc mode change which in turn, causes the driver to probe every DisplayPort for a dpcd. However, in cases where hotplugging doesn't cause a mode change (specifically when one unplugs a monitor from a DisplayPort connector, then plugs that same monitor back in seconds later on the same port without any other monitors connected), we never probe for the dpcd before starting the initial link training. What happens from there looks like this: - GPU has only one monitor connected. It's connected via DisplayPort, and does not go through an adaptor of any sort. - User unplugs DisplayPort connector from GPU. - Change in HPD is detected by the driver, we probe every DisplayPort for a possible connection. - Probe the port the user originally had the monitor connected on for it's dpcd. This fails, and we clear the first (and only the first) byte of the dpcd to indicate we no longer have a dpcd for this port. - User plugs the previously disconnected monitor back into the same DisplayPort. - radeon_connector_hotplug() is called before everyone else, and tries to handle the link training. Since only the first byte of the dpcd is zeroed, the driver is able to complete link training but does so against the wrong dpcd, causing it to initialize the link with the wrong settings. - Display stays blank (usually), dpcd is probed after the initial link training, and the driver prints no obvious messages to the log. In theory, since only one byte of the dpcd is chopped off (specifically, the byte that contains the revision information for DisplayPort), it's not entirely impossible that this bug may not show on certain monitors. For instance, the only reason this bug was visible on my ASUS PB238 monitor was due to the fact that this monitor using the enhanced framing symbol sequence, the flag for which is ignored if the radeon driver thinks that the DisplayPort version is below 1.1. Signed-off-by:
Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 12e244f4 upstream. The previous fix confused a selector with a segment prefix. Fix it. Compile-tested only. Cc: Juergen Gross <jgross@suse.com> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Fixes: 4809146b ("x86/ldt: Correct FPU emulation access to LDT") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 4809146b upstream. Commit 37868fe1 ("x86/ldt: Make modify_ldt synchronous") introduced a new struct ldt_struct anchored at mm->context.ldt. Adapt the x86 fpu emulation code to use that new structure. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 136d9d83 upstream. Commit 37868fe1 ("x86/ldt: Make modify_ldt synchronous") introduced a new struct ldt_struct anchored at mm->context.ldt. convert_ip_to_linear() was changed to reflect this, but indexing into the ldt has to be changed as the pointer is no longer void *. Signed-off-by:
-
Andy Lutomirski authored
commit 37868fe1 upstream. modify_ldt() has questionable locking and does not synchronize threads. Improve it: redesign the locking and synchronize all threads' LDTs using an IPI on all modifications. This will dramatically slow down modify_ldt in multithreaded programs, but there shouldn't be any multithreaded programs that care about modify_ldt's performance in the first place. This fixes some fallout from the CVE-2015-5157 fixes. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org <security@kernel.org> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.orgSigned-off-by:
-
- 13 Sep, 2015 29 commits
-
-
Greg Kroah-Hartman authored
-
Nathan Lynch authored
commit 3473f265 upstream. The Sourcery CodeBench Lite 2014.05 toolchain (gcc 4.8.3, binutils 2.24.51) has a GCC which implements -fuse-ld, and it doesn't include the gold linker, but it lacks an ld.bfd executable in its installation. This means that passing -fuse-ld=bfd fails with: VDSO arch/arm/vdso/vdso.so.raw collect2: fatal error: cannot find 'ld' Arguably this is a deficiency in the toolchain, but I suspect it's commonly used enough that it's worth accommodating: just use cc-ldoption (to cause a link attempt) instead of cc-option to test whether we can use -fuse-ld. So -fuse-ld=bfd won't be used with this toolchain, but the build will rightly succeed, just as it does for toolchains which don't implement -fuse-ld (and don't use gold as the default linker). Note: this will change the failure mode for a corner case I was trying to handle in d2b30cd4, where the toolchain defaults to the gold linker and the BFD linker is not found in PATH, from: VDSO arch/arm/vdso/vdso.so.raw collect2: fatal error: cannot find 'ld' i.e. the BFD linker is not found, to: OBJCOPY arch/arm/vdso/vdso.so BFD: arch/arm/vdso/vdso.so: Not enough room for program headers, try linking with -N that is, we fail to prevent gold from being used as the linker, and it produces an object that objcopy can't digest. Reported-by:
Baruch Siach <baruch@tkos.co.il> Tested-by:
Raphaël Poggi <poggi.raph@gmail.com> Fixes: d2b30cd4 ("ARM: 8384/1: VDSO: force use of BFD linker") Cc: stable@vger.kernel.org Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jisheng Zhang authored
commit e43d0189 upstream. Commit b253149b ("sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance") restores mwait_idle(), but the trace_cpu_idle related calls are missing. This causes powertop on my old desktop powered by Intel Core2 E6550 to report zero wakeups and zero events. Add them back to restore the proper behaviour. Fixes: b253149b ("sched/idle/x86: Restore mwait_idle() to ...") Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Cc: <len.brown@intel.com> Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit a57e456a upstream. In the recent x2apic cleanup I got two things really wrong: 1) The safety check in __disable_x2apic which allows the function to be called unconditionally is backwards. The check is there to prevent access to the apic MSR in case that the machine has no apic. Though right now it returns if the machine has an apic and therefor the disabling of x2apic is never invoked. 2) x2apic_disable() sets x2apic_mode to 0 after registering the local apic. That's wrong, because register_lapic_address() checks x2apic mode and therefor takes the wrong code path. This results in boot failures on machines with x2apic preenabled by BIOS and can also lead to an fatal MSR access on machines without apic. The solutions are simple: 1) Correct the sanity check for apic availability 2) Clear x2apic_mode _before_ calling register_lapic_address() Fixes: 659006bf 'x86/x2apic: Split enable and setup function' Reported-and-tested-by:
Javier Monteagudo <javiermon@gmail.com> Signed-off-by:
-
David Vrabel authored
commit 87ffd2b9 upstream. Since commit feb44f1f (x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need a full APIC driver and thus should depend on X86_LOCAL_APIC. This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by disabling Xen support in this configuration. Users needing Xen support in a non-SMP i386 kernel will need to enable CONFIG_X86_UP_APIC. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Shannon Zhao authored
commit b265da5a upstream. Commit d795ef9a ("arm64: perf: don't warn about missing interrupt-affinity property for PPIs") added a check for PPIs so that we avoid parsing the interrupt-affinity property for these naturally affine interrupts. Unfortunately, this check can trigger an early (successful) return and we will not assign the value of cpu_pmu->plat_device. This patch fixes the issue. Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Marc Zyngier authored
commit 126c69a0 upstream. When injecting a fault into a misbehaving 32bit guest, it seems rather idiotic to also inject a 64bit fault that is only going to corrupt the guest state. This leads to a situation where we perform an illegal exception return at EL2 causing the host to crash instead of killing the guest. Just fix the stupid bug that has been there from day 1. Reported-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Hiral Shah authored
fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack commit db196935 upstream. We added changes in fnic driver patch 1.6.0.16 to acquire io_req_lock in fnic_queuecommand() before issuing I/O so that io completion is serialized. But when releasing the lock we check for the I/O flag and this could be modified if IO abort occurs before I/O completion. In this case we wont release the lock and causes deadlock in some scenerios. Using the local variable to check the IO lock status will resolve the problem. Fixes: 41df7b02Signed-off-by:
Hiral Shah <hishah@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
Anil Chintalapati <achintal@cisco.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Guillermo A. Amaral authored
commit 7a7184b0 upstream. The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by:
Guillermo A. Amaral <g@maral.me> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit 06b23f7f upstream. The CAN FD data bittiming constants are provided via netlink only when there are valid CAN FD constants available in priv->data_bittiming_const. Due to the indirection of pointer assignments in the peak_usb driver the priv->data_bittiming_const never becomes NULL - not even for non-FD adapters. The data_bittiming_const points to zero'ed data which leads to this result when running 'ip -details link show can0': 35: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10 link/can promiscuity 0 can state STOPPED restart-ms 0 pcan_usb: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 : dtseg1 0..0 dtseg2 0..0 dsjw 1..0 dbrp 0..0 dbrp-inc 0 <== BROKEN! clock 8000000 This patch changes the struct peak_usb_adapter::bittiming_const and struct peak_usb_adapter::data_bittiming_const to pointers to fix the assignemnt problems. Reported-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Alan Stern authored
commit 49718f0f upstream. The routines in scsi_rpm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by calling the block layer's runtime-PM routines only if the device's driver really does have a runtime-PM callback routine. Since ses doesn't define any such callbacks, the crash won't occur. This fixes Bugzilla #101371. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Stanisław Pitucha <viraptor@gmail.com> Reported-by:
Ilan Cohen <ilanco@gmail.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Grygorii Strashko authored
commit b7560de1 upstream. This helper is required for irq chips which do not implement a irq_set_type callback and need to call down the irq domain hierarchy for the actual trigger type change. This helper is required to fix further wreckage caused by the conversion of TI OMAP to hierarchical irq domains and therefor tagged for stable. [ tglx: Massaged changelog ] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.comSigned-off-by:
-
Grygorii Strashko authored
commit 6d4affea upstream. irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to find at least one .irq_retrigger() callback implemented in the IRQ domain hierarchy. That's wrong, because check_irq_resend() expects a 0 return value from the callback in case that the hardware assisted resend was not possible. If the return value is non zero the core code assumes hardware resend success and the software resend is not invoked. This results in lost interrupts on platforms where none of the parent irq chips in the hierarchy implements the retrigger callback. This is observable on TI OMAP, where the hierarchy is: ARM GIC <- OMAP wakeupgen <- TI Crossbar Return 0 instead so the software resend mechanism gets invoked. [ tglx: Massaged changelog ] Fixes: 85f08c17 ('genirq: Introduce helper functions...') Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.comSigned-off-by:
-
Grygorii Strashko authored
commit 63059a27 upstream. The conversion of the wakeupgen irqchip to hierarchical irq domains failed to provide a mechanism to properly set the trigger type of an interrupt. The wakeupgen irq chip itself has no mechanism and therefor no irq_set_type() callback. The code before the conversion relayed the trigger configuration directly to the underlying GIC. Restore the correct behaviour by setting the wakeupgen irq_set_type callback to irq_chip_set_type_parent(). This propagates the set_trigger() call to the underlying GIC irqchip. [ tglx: Massaged changelog ] Fixes: 7136d457 ('ARM: omap: convert wakeupgen to stacked domains') Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1439554830-19502-5-git-send-email-grygorii.strashko@ti.comSigned-off-by:
-
Grygorii Strashko authored
commit 8200fe43 upstream. The TI crossbar irqchip doesn't provides any facility to configure the wakeup sources, but the conversion to hierarchical irqdomains set the irq_set_wake callback to irq_chip_set_wake_parent. The parent chip (OMAP wakeupgen) has no irq_set_wake function either so the call will fail with -ENOSYS. As a result the irq_set_wake() call in the resume path will trigger an 'Unbalanced wake disable' warning. Before the conversion the GIC irqchip was the top level irqchip and correctly flagged with IRQCHIP_SKIP_SET_WAKE. Restore the correct behaviour by removing the irq_set_type callback from the crossbar irqchip and set the IRQCHIP_SKIP_SET_WAKE flag which lets the irq_set_irq_wake() call from the driver succeed. [ tglx: Massaged changelog ] Fixes: 783d3186 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by:
-
Grygorii Strashko authored
commit 4fd8f47e upstream. The ARM GIC requires that all interrupts which are not used as a wakeup source have to be masked during suspend. The conversion of the crossbar irqchip to hierarchical irq domains failed to mark the crossbar irqchip with the IRQCHIP_MASK_ON_SUSPEND flag and therefor broke the suspend requirement of the GIC. Before the conversion the flags were visible because the GIC was the top level irqchip. After the conversion the crossbar irqchip is the top level irq chip whose flags are evaluated in suspend_device_irq(). As the flag is not set the masking of the non-wakeup irqs is not invoked which breaks suspend. Add the IRQCHIP_MASK_ON_SUSPEND flag to the crossbar irqchip, so the GIC interrupts get masked properly. [ tglx: Massaged changelog ] Fixes: 783d3186 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by:
-
Grygorii Strashko authored
commit e269ec42 upstream. The conversion of the crossbar irqchip to hierarchical irq domains failed to provide a mechanism to properly set the trigger type of an interrupt. The crossbar irq chip itself has no mechanism and therefor no irq_set_type() callback. The code before the conversion relayed the trigger configuration directly to the underlying GIC. Restore the correct behaviour by setting the crossbar irq_set_type callback to irq_chip_set_type_parent(). This propagates the set_trigger() call to the underlying GIC irqchip. [ tglx: Massaged changelog ] Fixes: 783d3186 ('irqchip: crossbar: Convert dra7 crossbar...') Signed-off-by:
-
Vincent Bernat authored
commit 999b8b88 upstream. Some use of those functions were providing unitialized values to those functions. Notably, when reading 0 bytes from an empty file on a 9P filesystem, the return code of read() was not 0. Tested with this simple program: #include <assert.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, const char **argv) { assert(argc == 2); char buffer[256]; int fd = open(argv[1], O_RDONLY|O_NOCTTY); assert(fd >= 0); assert(read(fd, buffer, 0) == 0); return 0; } Signed-off-by:
Vincent Bernat <vincent@bernat.im> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Thulasimani,Sivakumar authored
commit ed63baaf upstream. This patch removes TP3 support on CHV since there is no support for HBR2 on this platform. v2: rename the function to indicate it checks source rates (Jani) v3: update comment to indicate TP3 dependency on HBR2 supported hardware (Jani) Reviewed-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> [Jani: fixed a couple of checkpatch warnings.] Signed-off-by:
-
Thulasimani,Sivakumar authored
commit 5e86dfe3 upstream. This patch removes 5.4Gbps from supported link rate for CHV since it is not supported in it. v2: change the ordering for better readability (Ville) Reviewed-by:
-
Chris Wilson authored
commit 903ecd0b upstream. Everytime we use the logical context with execlists it becomes dirty (as the hardware will write the new register values afterwards, as well as the GPU state that will be used). We need to then flag the context as dirty everytime since after a swap-out/swap-in cycle the dirty flag will be cleared, and a further swap-out cycle will then loose the most recent GPU state. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Thierry Reding authored
commit dbb3df2d upstream. If PM is enabled but PM_SLEEP is disabled, the suspend/resume functions are still unused and produce a compiler warning. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Vincent Pelletier authored
commit 1ae5ddb6 upstream. GPIOF_IN flag was lost in: Commit 633a21d8("input: gpio_keys_polled: Add support for GPIO descriptors"). Without this flag, legacy code path (for non-descriptor GPIO declarations) would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW). Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 45ea2a5f upstream. Meelis and Helge reported that 3a9ad0b4 ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4, we always used 32-bit PCI addresses. After 3a9ad0b4, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4 ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.eeReported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Helge Deller <deller@gmx.de> Tested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Alexei Potashnik authored
commit 9547308b upstream. Make sure all non-READ SCSI commands get targ_xfer_tag initialized to 0xffffffff, not just WRITEs. Double-free of a TUR cmd object occurs under the following scenario: 1. TUR received (targ_xfer_tag is uninitialized and left at 0) 2. TUR status sent 3. First unsolicited NOPIN is sent to initiator (gets targ_xfer_tag of 0) 4. NOPOUT for NOPIN (with TTT=0) arrives - its ExpStatSN acks TUR status, TUR is queued for removal - LIO tries to find NOPIN with TTT=0, but finds the same TUR instead, TUR is queued for removal for the 2nd time (Drop unbalanced conditional bracket usage - nab) Signed-off-by:
Alexei Potashnik <alexei@purestorage.com> Signed-off-by:
Spencer Baugh <sbaugh@catern.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Adrien Schildknecht authored
commit f5eeb5fa upstream. At the last iteration of the loop, j may equal zero and thus tp_list[j - 1] causes an invalid read. Change the logic of the loop so that j - 1 is always >= 0. Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Markus Osterhoff authored
commit c7e69ae6 upstream. After a for-loop was replaced by list_for_each_entry, see Commit bbbc7e85 ("ALSA: hda - Allocate hda_pcm objects dynamically"), Commit 751e2216 ("ALSA: hda: fix possible null dereference"), a possible NULL pointer dereference has been introduced; this patch adds the NULL check on pcm->pcm, while leaving a potentially superfluous check on pcm itself untouched. Signed-off-by:
Markus Osterhoff <linux-kernel@k-raum.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c7cd0ef6 upstream. The widget power-saving code tries to turn up/down the power of each widget in the I/O paths that are modified at each jack plug/unplug. The recent report revealed that the power activation leaves some widgets unpowered after plugging. This is because snd_hda_activate_path() turns on path->active flag at the end of the function while the path power management is done before that. Then it's regarded as if nothing is active, and the driver turns off the power. The fix is simply to set the flag at the beginning of the function, before trying to power up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521Signed-off-by:
-
Takashi Iwai authored
commit 9d2b48f7 upstream. The is_active_nid_for_any() function in the generic parser is supposed to check all connections from/to the given widget, but the current code checks only the first input connection (index = 0). This patch corrects the code to check all inputs by passing -1 to index argument. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521Signed-off-by:
-
