- 15 Dec, 2009 18 commits
-
-
Masami Hiramatsu authored
Check hyphen only command argument, because perf-probe doesn't support event recording feature yet. e.g. # perf probe - Error: '-' is not supported. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091215153128.17436.9266.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Masami Hiramatsu authored
Fix show_perf_probe_event() to check the result of e_snprintf(). Signed-off-by:
-
Masami Hiramatsu authored
Clean up struct session in builtin-probe.c, including change need_dwarf to bool and move listing flag into struct session as list_events flag. This also changes parse_perf_probe_event() interface due to code readability. Signed-off-by:
-
Peter Zijlstra authored
The miss-alignment of bp_addr created a 32bit hole, causing different structure packings on 32 and 64 bit machines. Fix that by moving __reserve_2 into that hole. Further, remove the useless struct and redundant __bp_reserve muck. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1260902591.8023.781.camel@laptop> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Add a newline do fix this problem: ERROR: perf-diff.txt: line 31: closing [blockdef-listing] delimiter expected Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260882082-10007-1-git-send-email-acme@infradead.org> Signed-off-by:
-
Ingo Molnar authored
Fix the short line displayed by 'perf' and also fix some other details in the longer text. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Paul Mackerras authored
It is quite legitimate for CPUs to be numbered sparsely, meaning that it possible for an online CPU to have a number which is greater than the total count of possible CPUs. Currently find_get_context() has a sanity check on the cpu number where it checks it against num_possible_cpus(). This test can fail for a legitimate cpu number if the cpu_possible_mask is sparsely populated. This fixes the problem by checking the CPU number against nr_cpumask_bits instead, since that is the appropriate check to ensure that the cpu number is same to pass to cpu_isset() subsequently. Reported-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Paul Mackerras <paulus@samba.org> Tested-by:
Peter Zijlstra <peterz@infradead.org> Cc: <stable@kernel.org> LKML-Reference: <20091215084032.GA18661@brick.ozlabs.ibm.com> Signed-off-by:
-
Tom Zanussi authored
Update the perf-trace page with new and missing options and remove some unused ones. Signed-off-by:
Tom Zanussi <tzanussi@gmail.com> Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org LKML-Reference: <1260867220-15699-7-git-send-email-tzanussi@gmail.com> Signed-off-by:
-
Tom Zanussi authored
Allow scripts to be recorded/executed by simply specifying the script root name (the script name minus extension) along with 'record' or 'report' to 'perf trace'. The script names shown by 'perf trace -l' can be directly used to run the command-line contained within the corresponding '-record' and '-report' versions of scripts in the scripts/*/bin directories. For example, to record the trace data needed to run the wakeup-latency.pl script, the user can easily find the name of the corresponding script from the script list and invoke it using 'perf trace record', without having to remember the details of how to do the same thing using the lower-level perf trace command-line options: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity root@tropicana:~# perf trace record wakeup-latency ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.296 MB perf.data (~12931 samples) ] To run the wakeup-latency.pl script using the captured data, change 'record' to 'report' in the command-line: root@tropicana:~# perf trace report wakeup-latency wakeup_latency stats: total_wakeups: 65 avg_wakeup_latency (ns): 22417 min_wakeup_latency (ns): 3470 max_wakeup_latency (ns): 223311 perf trace Perl script stopped If the script takes options, thay can be simply added to the end of the 'report' invocation: root@tropicana:~# perf trace record rw-by-file ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.782 MB perf.data (~34171 samples) ] root@tropicana:~# perf trace report rw-by-file perf file read counts for perf: fd # reads bytes_requested ------ ---------- ----------- 122 1934 1980416 120 1 32 file write counts for perf: fd # writes bytes_written ------ ---------- ----------- 3 4006 280568 perf trace Perl script stopped Signed-off-by: -
Tom Zanussi authored
Lists the available perf trace scripts, one per line e.g.: root@tropicana:~# perf trace -l List of available trace scripts: workqueue-stats workqueue stats (ins/exe/create/destroy) wakeup-latency system-wide min/max/avg wakeup latency rw-by-file <comm> r/w activity for a program, by file check-perf-trace useless but exhaustive test script rw-by-pid system-wide r/w activity To be consistent with the other listing options in perf, the current latency trace option was changed to '-L', and '-l' is now used to access the script listing as: To create the list, it searches each scripts/*/bin directory for files ending with "-report" and reads information found in certain comment lines contained in those shell scripts: - if the comment line starts with "description:", the rest of the line is used as a 'half-line' description. To keep each line in the list to a single line, the description should be limited to 40 characters (the rest of the line contains the script name and args) - if the comment line starts with "args:", the rest of the line names the args the script supports. Required args should be surrounded by <> brackets, optional args by [] brackets. The current scripts in scripts/perl/bin have also been updated with description: and args: comments. Signed-off-by: -
Tom Zanussi authored
The return value from perl_run() is currently ignored, but it should be checked and used to exit perf if there are problems loading the script. Signed-off-by:
-
Tom Zanussi authored
README and Makefile.PL don't need to be installed for Perl run-time support. Signed-off-by:
-
Tom Zanussi authored
One oversight of the original scripting_ops patch was a lack of support for passing args to handler scripts. This adds argc/argv to the start_script() scripting_op, and changes the rw-by-file script to take 'comm' arg rather than the 'perf' value currently hard-coded. It also takes the opportunity to do some related minor cleanup. Signed-off-by:
-
Frederic Weisbecker authored
perf top, report and annotate all define their own symbol_conf, it should be static. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260843322-6602-1-git-send-regression-fweisbec@gmail.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
I guess it is enough to show some examples: [root@doppio linux-2.6-tip]# rm -f perf.data* [root@doppio linux-2.6-tip]# ls -la perf.data* ls: cannot access perf.data*: No such file or directory [root@doppio linux-2.6-tip]# perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] [root@doppio linux-2.6-tip]# ls -la perf.data* -rw------- 1 root root 74440 2009-12-14 20:03 perf.data [root@doppio linux-2.6-tip]# perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2692 samples) ] [root@doppio linux-2.6-tip]# ls -la perf.data* -rw------- 1 root root 74280 2009-12-14 20:03 perf.data -rw------- 1 root root 74440 2009-12-14 20:03 perf.data.old [root@doppio linux-2.6-tip]# perf diff | head -5 1 -34994580 /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 -15307806 [kernel.kallsyms] __kmalloc 3 +1 +3665941 /lib64/libc-2.10.1.so __GI_memmove 4 +4 +23508995 /lib64/libc-2.10.1.so _int_malloc 5 +7 +38538813 [kernel.kallsyms] __d_lookup [root@doppio linux-2.6-tip]# perf diff -p | head -5 1 +1.00% /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 [kernel.kallsyms] __kmalloc 3 +1 /lib64/libc-2.10.1.so __GI_memmove 4 +4 /lib64/libc-2.10.1.so _int_malloc 5 +7 -1.00% [kernel.kallsyms] __d_lookup [root@doppio linux-2.6-tip]# perf diff -v | head -5 1 361449551 326454971 -34994580 /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 151009241 135701435 -15307806 [kernel.kallsyms] __kmalloc 3 +1 101805328 105471269 +3665941 /lib64/libc-2.10.1.so __GI_memmove 4 +4 78041440 101550435 +23508995 /lib64/libc-2.10.1.so _int_malloc 5 +7 59536172 98074985 +38538813 [kernel.kallsyms] __d_lookup [root@doppio linux-2.6-tip]# perf diff -vp | head -5 1 9.00% 8.00% +1.00% /lib64/libc-2.10.1.so _IO_vfprintf_internal 2 3.00% 3.00% [kernel.kallsyms] __kmalloc 3 +1 2.00% 2.00% /lib64/libc-2.10.1.so __GI_memmove 4 +4 2.00% 2.00% /lib64/libc-2.10.1.so _int_malloc 5 +7 1.00% 2.00% -1.00% [kernel.kallsyms] __d_lookup [root@doppio linux-2.6-tip]# This should be enough for diffs where the system is non volatile, i.e. when one doesn't updates binaries. For volatile environments, stay tuned for the next perf tool feature: a buildid cache populated by 'perf record', managed by 'perf buildid-cache' a-la ccache, and used by all the report tools. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
And it is also needed by 'perf diff'. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
- 14 Dec, 2009 12 commits
-
-
Arnaldo Carvalho de Melo authored
All tools had copies, and perf diff would have to specify a sample_type_check method just for copying it. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This is really a generic library routine, so declutter builtin-report.c a bit by moving it to the library. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
As we'll need to sort multiple times for multiple perf sessions, so that we can then do a diff. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
All hist entries are in only one of them, so use just one and a temporary rb_root while sorting/collapsing. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
There is still some more work to do to disentangle map creation from DSO loading, but this happens only for the kernel, and for the early adopters of perf diff, where this disentanglement matters most, we'll be testing different kernels, so no problem here. Further clarification: right now we create the kernel maps for the various modules and discontiguous kernel text maps when loading the DSO, we should do it as a two step process, first creating the maps, for multiple mappings with the same DSO store, then doing the dso load just once, for the first hit on one of the maps sharing this DSO backing store. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
So that we can process two perf.data files. We still need to add a O_MMAP mode for perf_session so that we can do all the mmap stuff in it. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
By having the cwd/cwdlen in the perf_session struct and full_paths in perf_event_ops. Now its just a matter of passing the ops. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
No need for all tools to register it and then immediately call perf_session__process_events. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Pass the event_ops to perf_session__process_events instead. Also move the event_ops definition to session.h, starting to move things around to their right place, trimming the many unneeded headers we have. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
They will need it to get the right threads list, etc. Signed-off-by:
-
David Miller authored
Here, tvec->tv_usec is "unsigned int" not "unsigned long". Since the type is different on every platform, it's probably best to just use long printf formats and cast. Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091213.235622.53363059.davem@davemloft.net> Signed-off-by:
-
Hitoshi Mitake authored
This patch adds a new "all" pseudo subsystem and an "all" pseudo suite. These are for testing all subsystem and its all suite, or all suite of one subsystem. (This patch also contains a few trivial comment fixes for bench/* and output style fixes. I judged that there are no necessity to make them into individual patch.) Example of use: | % ./perf bench sched all # Test all suites of sched subsystem | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.414 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 10.999 [sec] | | 10.999317 usecs/op | 90914 ops/sec | | % ./perf bench all # Test all suites of all subsystems | # Running sched/messaging benchmark... | # 20 sender and receiver processes per group | # 10 groups == 400 processes run | | Total time: 0.420 [sec] | | # Running sched/pipe benchmark... | # Extecuted 1000000 pipe operations between two tasks | | Total time: 11.741 [sec] | | 11.741346 usecs/op | 85169 ops/sec | | # Running mem/memcpy benchmark... | # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ... | | 808.407437 MB/Sec Signed-off-by:
Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by:
-
- 12 Dec, 2009 8 commits
-
-
Arnaldo Carvalho de Melo authored
That does all the initialization boilerplate, opening the file, reading the header, checking if it is valid, etc. And that will as well have the threads list, kmap (now) global variable, etc, so that we can handle two (or more) perf.data files describing sessions to compare. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
It is always wired to dso__find_symbol. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Configurable via symbol_conf.sort_by_name, so that the cost of an extra rb_node on all 'struct symbol' instances is not paid by tools that only want to decode addresses. How to use it: symbol_conf.sort_by_name = true; symbol_init(&symbol_conf); struct map *map = map_groups__find_by_name(kmaps, MAP__VARIABLE, "[kernel.kallsyms]"); if (map == NULL) { pr_err("couldn't find map!\n"); kernel_maps__fprintf(stdout); } else { struct symbol *sym = map__find_symbol_by_name(map, sym_filter, NULL); if (sym == NULL) pr_err("couldn't find symbol %s!\n", sym_filter); else pr_info("symbol %s: %#Lx-%#Lx \n", sym_filter, sym->start, sym->end); } Looking over the vmlinux/kallsyms is common enough that I'll add a variable to the upcoming struct perf_session to avoid the need to use map_groups__find_by_name to get the main vmlinux/kallsyms map. The above example looks on the 'variable' symtab, but it is just like that for the functions one. Also the sort operation is done when we first use map__find_symbol_by_name, in a lazy way. Signed-off-by: -
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Example: { u64 addr = strtoull(sym_filter, NULL, 16); struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr); if (map == NULL) pr_err("couldn't find map!\n"); else { struct symbol *sym = map__find_symbol(map, addr, NULL); if (sym == NULL) pr_err("couldn't find addr!\n"); else pr_info("addr %#Lx is in %s global var\n", addr, sym->name); } exit(0); } Added just after symbol__init() call in 'perf top', then: { u64 addr = strtoull(sym_filter, NULL, 16); struct map *map = map_groups__find(kmaps, MAP__VARIABLE, addr); if (map == NULL) pr_err("couldn't find map!\n"); else { struct symbol *sym = map__find_symbol(map, addr, NULL); if (sym == NULL) pr_err("couldn't find addr!\n"); else pr_info("addr %#Lx is in %s global var\n", addr, sym->name); } exit(0); } [root@doppio linux-2.6-tip]# grep ' [dD] ' /proc/kallsyms | grep ' sched' ffffffff817827d8 d sched_nr_latency ffffffff81782ce0 d sched_domains_mutex ffffffff8178c070 d schedstr.22423 ffffffff817909a0 d sched_register_mutex ffffffff81823490 d sched_feat_names ffffffff81823558 d scheduler_running ffffffff818235b8 d sched_clock_running ffffffff818235bc D sched_clock_stable ffffffff81824f00 d sched_switch_trace [root@doppio linux-2.6-tip]# perf top -s 0xffffffff817827d9 addr 0xffffffff817827d9 is in sched_nr_latency global var [root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 addr 0xffffffff81782ce0 is in sched_domains_mutex global var [root@doppio linux-2.6-tip]# [root@doppio linux-2.6-tip]# perf top -s ffffffff81782ce0 --vmlinux OFF The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff81782ce0 is in sched_domains_mutex global var [root@doppio linux-2.6-tip]# perf top -s ffffffff818235bc --vmlinux OFF The file OFF cannot be used, trying to use /proc/kallsyms...addr 0xffffffff818235bc is in sched_clock_stable global var [root@doppio linux-2.6-tip]# So it works with both /proc/kallsyms and with ELF symtabs, either the one on the vmlinux explicitely passed via --vmlinux or in one in the vmlinux_path that matches the buildid for the running kernel or the one found in the buildid header section in a perf.data file. Signed-off-by: -
Arnaldo Carvalho de Melo authored
For selecting the right types of symbols in ELF symtabs. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For selecting the right types of symbols in /proc/kallsyms, will be followed by elf_symbol_type__is_a, for the same purpose on ELF symtabs. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Using a struct thread instance just to hold the kernel space maps (vmlinux + modules) is overkill and confuses people trying to understand the perf symbols abstractions. The kernel maps are really present in all threads, i.e. the kernel is a library, not a separate thread. So introduce the 'map_groups' abstraction and use it for the kernel maps, now in the kmaps global variable. It, in turn, will move, together with the threads list to the perf_file abstraction, so that we can support multiple perf_file instances, needed by perf diff. Brainstormed-with: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
- 11 Dec, 2009 2 commits
-
-
Jamie Iles authored
Add definitions of rmb() and cpu_relax() and include the ARM unistd.h header. The __kuser_memory_barrier helper in the helper page is used to provide the correct memory barrier depending on the CPU type. [ The rmb() will work on v6 and v7, segfault on v5. Dynamic detection to add v5 support will be added later. ] Signed-off-by:
Jamie Iles <jamie.iles@picochip.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mikael Pettersson <mikpe@it.uu.se> LKML-Reference: <1260534009-5394-1-git-send-email-jamie.iles@picochip.com> Signed-off-by:
-
Frederic Weisbecker authored
While converting modify_user_hw_breakpoint() return value, we forgot to handle the off-case. It's not returning a pointer anymore. This solves the build warning reported by Stephen Rothwell against linux-next. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
