Remove or replace BUG/BUG_ON where possible and convert WARN_ON
to WARN_ON_ONCE if they can occur freqeuently as pointed out by:
https://lkml.org/lkml/2012/9/27/461

Checks have been removed if:
- the error condition leads to a hardware error which gets logged
  and in most cases stops the device
- the error condition is a null pointer access
- the error condition is just pointless or already handled at
  another location
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Do not use more than one KERN_<level> per printk.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Preinitialize the program check table, so we can put it into the
read-only data section.
Also use only four byte entries for the table, since each program
check handler resides within the first 2GB. Therefore this reduces
the size of the table by 50% on 64 bit builds.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use 1MB frames for vmemmap if EDAT1 is available in order to
reduce TLB pressure
Always use a 1MB frame even if its only partially needed for
struct pages. Otherwise we would end up with a mix of large
frame and page mappings, because vmemmap_populate gets called
for each section (256MB -> 3.5MB memmap) separately.
Worst case is that we would waste 512KB.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use 2GB frames for indentity mapping if EDAT2 is
available to reduce TLB pressure.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull input updates from Dmitry Torokhov:
 "This fixes recent regression where /dev/input/mice got assigned wrong
  device node which messed up setups with static /dev, and a regression
  in ads7846 GPIO debounce setup."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  ARM - OMAP: ads7846: fix pendown debounce setting
  Input: ads7846 - enable pendown GPIO debounce time setting
  Input: mousedev - move /dev/input/mice to the correct minor
  Input: MT - document new 'flags' argument of input_mt_init_slots()

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes for final 3.7.  Two dealing with pinmux setup on
  OMAP, and one dealing with TV output on DaVinci.  And one small
  MAINTAINER update."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: davinci: dm644x: fix out range signal for ED
  ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC
  ARM: OMAP3: igep0020: Set WIFI/BT GPIO pins in correct mux mode
  ARM: OMAP: Add maintainer entry for IGEP machines

Pull PARISC fixes from James Bottomley:
 "This is two bug fixes: one fixes a loophole where rt_sigprocmask()
  with the wrong values panics the box (Denial of Service) and the other
  fixes an aliasing problem with get_shared_area() which could cause
  data corruption.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] fix user-triggerable panic on parisc
  [PARISC] fix virtual aliasing issue in get_shared_area()

Pull SCSI fixes from James Bottomley:
 "This is a set of four bug fixes.

  The isci one is an obvious thinko (using request buffer instead of
  response buffer) which causes a command to fail.

  The three others are DIF/DIX updates which are required because
  they're part of a series of ten patches, the other seven of which went
  into the block layer during the merge window meaning our current
  DIF/DIX implementation is broken without these three.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] sd: Implement support for WRITE SAME
  [SCSI] sd: Permit merged discard requests
  [SCSI] Add a report opcode helper
  [SCSI] isci: copy fis 0x34 response into proper buffer

Pull drm fixes from Dave Airlie.

Small fixes for (mostly Nouveau, some radeon) regressions.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: use the correct fence implementation for nv50
  drm/radeon: add new SI pci id
  radeon: add AGPMode 1 quirk for RV250
  drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop()
  drm/nouveau/bios: fix DCB v1.5 parsing
  drm/nouveau: add missing pll_calc calls
  drm/nouveau: fix crash with noaccel=1
  drm/nv40: allocate ctxprog with kmalloc
  drm/nvc0/disp: fix thinko in vblank regression fix..

int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset,
                                    unsigned int sigsetsize)
{
        sigset_t old_set, new_set;
        int ret;

        if (set && get_sigset32(set, &new_set, sigsetsize))

...
static int
get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
{
        compat_sigset_t s;
        int r;

        if (sz != sizeof *set) panic("put_sigset32()");

In other words, rt_sigprocmask(69, (void *)69, 69) done by 32bit process
will promptly panic the box.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Alex writes:
A couple more small fixes for 3.7:
- another evergreen_mc fix
- add an AGP quirk for an old RV250
- new pci id.

* 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add new SI pci id
  radeon: add AGPMode 1 quirk for RV250
  drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop()

Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

nouveau: one more regression fix.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: use the correct fence implementation for nv50

Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

Some more misc fallout from nouveau rework.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/bios: fix DCB v1.5 parsing
  drm/nouveau: add missing pll_calc calls
  drm/nouveau: fix crash with noaccel=1
  drm/nv40: allocate ctxprog with kmalloc
  drm/nvc0/disp: fix thinko in vblank regression fix..

Only compile time tested, noticed nv50_fence_create was never used,
so fix this. This will probably fix vblank on nv50 cards.

Hopefully this is still in time for 3.7 final release.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There have been some 3.7-rc reports of vm issues, including some kswapd
bugs and, more importantly, some memory "leaks":

	http://www.spinics.net/lists/linux-mm/msg46187.html
	https://bugzilla.kernel.org/show_bug.cgi?id=50181

Commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page
immediately when it is made available") took split_free_page() and
reused it for the compaction code.  It does something curious with
capture_free_page() (previously known as split_free_page()):

  int capture_free_page(struct page *page, int alloc_order,
  ...
          __mod_zone_page_state(zone, NR_FREE_PAGES, -(1UL << order));

  -       /* Split into individual pages */
  -       set_page_refcounted(page);
  -       split_page(page, order);
  +       if (alloc_order != order)
  +               expand(zone, page, alloc_order, order,
  +                       &zone->free_area[order], migratetype);

Note that expand() puts the pages _back_ in the allocator, but it does
not bump NR_FREE_PAGES.  We "return" 'alloc_order' worth of pages, but
we accounted for removing 'order' in the __mod_zone_page_state() call.

For the old split_page()-style use (order==alloc_order) the bug will not
trigger.  But, when called from the compaction code where we
occasionally get a larger page out of the buddy allocator than we need,
we will run in to this.

This patch simply changes the NR_FREE_PAGES manipulation to the correct
'alloc_order' instead of 'order'.

I've been able to repeatedly trigger this in my testing environment.
The amount "leaked" very closely tracks the imbalance I see in buddy
pages vs.  NR_FREE_PAGES.  I have confirmed that this patch fixes the
imbalance
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:

 1) inet6_csk_update_pmtu() must return NULL or non-NULL, so translate
    ERR_PTR to NULL, as needed.  Fix from Eric Dumazet.

 2) Fix copy&paste error in IRDA sir_dev ->set_speed method invocation,
    it was testing the NULL'ness of a different method to guard the
    call.  Fix from Alexander Shiyan.

 3) Fix build regression of xilinx driver, from Jeff Mahoney.

 4) Make XEN netfront (like XEN netback) handle compound pages in SKBs
    properly.  From Ian Campbell.

 5) Fix inverted logic of team_dev_queue_xmit() return value checks,
    from Jiri Pirko and Dan Carpenter.

 6) dma_poll_create() no longer allows a NULL device argument, breaking
    both ixp4xx drivers.  Fix from Xi Wang.

 7) ne2000 driver doesn't hook up the parent device properly, breaking
    udev matching.  Fix from Alan Cox.

 8) Locking and memory leak fixes in Near Field Communications layer.
    From Thierry Escande, Szymon Janc, and Waldemar Rymarkiewicz.

 9) sis900 resume regression, sis900_set_mode() is being called with the
    iomem pointer instead of the expected device private.  Fix from
    Francois Romieu.

10) Fix IBSS regression caused by uninitializing the ibss-internals
    before performing an emptyness check, from Simon WUnderlich.

11) Fix SNIFFER mode regression in iwlwifi driver, from Johannes Berg.

12) Fix task wedges in mwifiex_cmd_timeout_func(), from Bing Zhao.

13) Add back wireless sysfs directory, too much stuff depends upon it
    being there (actually I'd say it never should have been removed to
    begin with).  From Johannes Berg.

14) Fix hang introduced by suspend/resume changes in ath9k.  Fix from
    Sujith Manoharan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  team: bcast: convert return value of team_dev_queue_xmit() to bool correctly
  bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices.
  xen/netfront: handle compound page fragments on transmit
  net: fix build failure in xilinx
  irda: sir_dev: Fix copy/paste typo
  ipv6: fix inet6_csk_update_pmtu() return value
  ixp4xx_hss: avoid calling dma_pool_create() with NULL dev
  ixp4xx_eth: avoid calling dma_pool_create() with NULL dev
  ne2000: add the right platform device
  of/net/mdio-gpio: Fix pdev->id issue when using devicetrees.
  NFC: Fix pn533 target mode memory leak
  NFC: pn533: Fix mem leak in pn533_in_dep_link_up
  NFC: pn533: Fix use after free
  NFC: pn533: Fix missing lock while operating on commands list
  NFC: Fix nfc_llcp_local chained list insertion
  ath9k_hw: Fix regression in device reset
  sis900: fix sis900_set_mode call parameters.
  iwlwifi: don't WARN when a non empty queue is disabled
  wireless: add back sysfs directory
  mwifiex: report error to MMC core if we cannot suspend
  ...

Merge tag 'omap-for-v3.7-rc5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Few more regression fixes related to u-boot only muxing
essential pins.

* tag 'omap-for-v3.7-rc5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC
  ARM: OMAP3: igep0020: Set WIFI/BT GPIO pins in correct mux mode
  ARM: OMAP: Add maintainer entry for IGEP machines

Commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code) have enabled the
pendown GPIO debounce time setting by the below sequence:

  gpio_request_one()
  gpio_set_debounce()
  gpio_free()

It also revealed a bug in the OMAP GPIO handling code which prevented
the GPIO debounce clock to be disabled and CORE transition to low power
states.

Commit c9c55d92 (gpio/omap: fix off-mode bug: clear debounce settings on
free/reset) fixes the OMAP GPIO handling code by making sure that the
GPIO debounce clock gets disabled if no GPIO is requested from current
bank.

While fixing the OMAP GPIO handling code (in the right way), the above
commit makes the gpio_request->set_debounce->free sequence invalid as
after freeing the GPIO, the debounce settings are lost.

Fix the debounce settings by moving the debounce initialization to the
actual GPIO requesting code - the ads7846 driver.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some platforms need the pendown GPIO debounce time setting programmed.
Since the pendown GPIO is handled by the driver, the debounce time
should also be handled along with the pendown GPIO request.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The thing is that team_dev_queue_xmit() returns NET_XMIT_* or -E*.
bc_trasmit() should return true in case all went well. So use ! to get
correct retval from team_dev_queue_xmit() result.
This bug caused iface statistics to be badly computed.

This bug was introduced by:
team: add broadcast mode (5fc88991)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'pinctrl-for-v3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fix from Linus Walleij:
 "A simple pinctrl Kconfig oneliner arriving late.

  Final (hopefully) oneliner for the pinctrl subsystem targeted at v3.7"

* tag 'pinctrl-for-v3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/samsung: don't allow enabling pinctrl-samsung standalone

Pull selinux RCU fixlet from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: fix sel_netnode_insert() suspicious rcu dereference

There have the following warning message when running modules install
for sign ko files:

  # make modules_install
  ...
    INSTALL drivers/input/touchscreen/pcap_ts.ko
  Found = in conditional, should be == at scripts/sign-file line 164.
  Found = in conditional, should be == at scripts/sign-file line 161.
  Found = in conditional, should be == at scripts/sign-file line 159.

This patch change replace '=' by '==' in elsif conditions for avoid the
above warning messages.
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An SKB paged fragment can consist of a compound page with order > 0.
However the netchannel protocol deals only in PAGE_SIZE frames.

Handle this in xennet_make_frags by iterating over the frames which
make up the page.

This is the netfront equivalent to 6a8ed462 for netback.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Cc: xen-devel@lists.xen.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: ANNIE LI <annie.li@oracle.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

John W. Linville says:

====================
This is a batch of fixes intended for 3.7...

Included are two pulls.  Regarding the mac80211 tree, Johannes says:

"Please pull my mac80211.git tree (see below) to get two more fixes for
3.7. Both fix regressions introduced *before* this cycle that weren't
noticed until now, one for IBSS not cleaning up properly and the other
to add back the "wireless" sysfs directory for Fedora's startup scripts."

Regarding the iwlwifi tree, Johannes says:

"Please also pull my iwlwifi.git tree, I have two fixes: one to remove a
spurious warning that can actually trigger in legitimate situations, and
the other to fix a regression from when monitor mode was changed to use
the "sniffer" firmware mode."

Also included is an nfc tree pull.  Samuel says:

"We mostly have pn533 fixes here, 2 memory leaks and an early unlocking fix.
Moreover, we also have an LLCP adapter linked list insertion fix."

On top of that, a few more bits...  Albert Pool adds a USB ID
to rtlwifi.  Bing Zhao provides two mwifiex fixes -- one to fix
a system hang during a command timeout, and the other to properly
report a suspend error to the MMC core.  Finally, Sujith Manoharan
fixes a thinko that would trigger an ath9k hang during device reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

===============================
[ INFO: suspicious RCU usage. ]
3.5.0-rc1+ #63 Not tainted
-------------------------------
security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by trinity-child1/8750:
 #0:  (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0

stack backtrace:
Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63
Call Trace:
 [<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130
 [<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0
 [<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0
 [<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0
 [<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0
 [<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60
 [<ffffffff812c9536>] security_socket_bind+0x16/0x20
 [<ffffffff815550ca>] sys_bind+0x7a/0x100
 [<ffffffff816c03d5>] ? sysret_check+0x22/0x5d
 [<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0
 [<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b

This patch below does what Paul McKenney suggested in the previous thread.
Signed-off-by: Dave Jones <davej@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Pull missed powerpc fixes from Benjamin Herrenschmidt:
 "Here are small 52xx fixes that Anatolij asked me to pull a while back
  and that I completely missed.  The stuff is local to that platform
  code, and was in next for a while, so it should still go into 3.7."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mpc5200: move lpbfifo node and fix its interrupt property
  powerpc: 52xx: nop out unsupported critical IRQs
  powerpc/pcm030: add pcm030-audio-fabric to dts

Merge tag 'stable/for-linus-3.7-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fix from Konrad Rzeszutek Wilk:
 - Fix regression introduced by commit ceb90fa0 ("xen/privcmd: add
   PRIVCMD_MMAPBATCH_V2 ioctl").

* tag 'stable/for-linus-3.7-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/privcmd: Correctly return success from IOCTL_PRIVCMD_MMAPBATCH

Pull KVM maintainership update from Avi Kivity:
 "After many years of maintaining KVM, I am moving on.  It was a real
  pleasure for me to work with so many talented and dedicated hackers on
  this project.

  Replacing me will be one of those talented and dedicated hackers,
  Gleb, who has authored hundreds of patches in and around KVM."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: taking co-maintenance
  KVM: Retire as maintainer

Pull IOMMU fixes from Joerg Roedel:
 "Some fixes and a MAINTAINERS update to remove my lost AMD email
  address from the file.  The fixes take care of a resource leak and a
  problem on VT-d with the new IOMMU group code."

* tag 'iommu-fixes-v3.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  intel-iommu: Fix lookup in add device
  iommu/tegra-smmu.c: fix dentry reference leak in smmu_debugfs_stats_show().
  iommu/amd: Update MAINTAINERS entry

Pull reiserfs and ext3 fixes from Jan Kara:
 "Fixes of reiserfs deadlocks when quotas are enabled (locking there was
  completely busted by BKL conversion) and also one small ext3 fix in
  the trim interface."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext3: Avoid underflow of in ext3_trim_fs()
  reiserfs: Move quota calls out of write lock
  reiserfs: Protect reiserfs_quota_write() with write lock
  reiserfs: Protect reiserfs_quota_on() with write lock
  reiserfs: Fix lock ordering during remount

This is a regression introduced by ceb90fa0 (xen/privcmd: add
PRIVCMD_MMAPBATCH_V2 ioctl).  It broke xentrace as it used
xc_map_foreign() instead of xc_map_foreign_bulk().

Most code-paths prefer the MMAPBATCH_V2, so this wasn't very obvious
that it broke. The return value is set early on to -EINVAL, and if all
goes well, the "set top bits of the MFN's" never gets called, so the
return value is still EINVAL when the function gets to the end, causing
the caller to think it went wrong (which it didn't!)

Now also including Andres "move the ret = -EINVAL into the error handling
path, as this avoids other similar errors in future.
Signed-off-by: Mats Petersson <mats.petersson@citrix.com>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Anatolij 52xx updates:

Patch for pcm030 device tree fixing the probe() in pcm030-audio-fabric
driver. Changes to this driver have been merged in 3.7-rc1 via ASoC
tree, but this required device tree patch was submitted separately to
the linux-ppc list and is still missing in mainline. Without this patch
the probe() in pcm030-audio-fabric driver wrongly returns -ENODEV.

A patch from Wolfram fixing wrong invalid critical irq warnings for
all mpc5200 boards.

Another patch for all mpc5200 device trees fixing wrong L1 cell in
the LPB FIFO interrupt property and moving the LPB FIFO node to the
common mpc5200b.dtsi file so that this common node will be present
in all mpc5200 device trees.

Commit 71c6c837 (drivers/net: fix tasklet misuse issue) introduced a
build failure in the xilinx driver. axienet_dma_err_handler isn't
declared before its use in axienet_open.

This patch provides the prototype before axienet_open.

Cc: Xiaotian Feng <dannyfeng@tencent.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of error, inet6_csk_update_pmtu() should consistently
return NULL.

Bug added in commit 35ad9b9c
(ipv6: Add helper inet6_csk_update_pmtu().)
Reported-by: Lluís Batlle i Rossell <viric@viric.name>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use &port->netdev->dev instead of NULL since dma_pool_create() doesn't
allow NULL dev.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>