- 06 Sep, 2017 15 commits
-
-
Matt Redfearn authored
When the immediate encoded in the instruction is accessed, it is sign extended due to being a signed value being assigned to a signed integer. The ISA specifies that this operation is an unsigned operation. The sign extension leads us to incorrectly decode: 801e9c8e: cbf1 sw ra,68(sp) As having an immediate of 1073741809. Since the instruction format does not specify signed/unsigned, and this is currently the only location to use this instuction format, change it to an unsigned immediate. Fixes: bb9bc468 ("MIPS: Calculate microMIPS ra properly when unwinding the stack") Suggested-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Miodrag Dinic <miodrag.dinic@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16957/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
Commit 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") added handling of microMIPS instructions to manipulate the stack pointer. Unfortunately the decoding of the addiusp instruction was incorrect, and performed a left shift by 2 bits to the raw immediate, rather than decoding the immediate and then performing the shift, as documented in the ISA. This led to incomplete stack traces, due to incorrect frame sizes being calculated. For example the instruction: 801faee0 <do_sys_poll>: 801faee0: 4e25 addiu sp,sp,-952 As decoded by objdump, would be interpreted by the existing code as having manipulated the stack pointer by +1096. Fix this by changing the order of decoding the immediate and applying the left shift. Also change to accessing the instuction through the union to avoid the endianness problem of accesing halfword[0], which will fail on big endian systems. Cope with the special behaviour of immediates 0x0, 0x1, 0x1fe and 0x1ff by XORing with 0x100 again if mod(immediate) < 4. This logic was tested with the following test code: int main(int argc, char **argv) { unsigned int enc; int imm; for (enc = 0; enc < 512; ++enc) { int tmp = enc << 2; imm = -(signed short)(tmp | ((tmp & 0x100) ? 0xfe00 : 0)); unsigned short tmp = enc; tmp = (tmp ^ 0x100) - 0x100; if ((unsigned short)(tmp + 2) < 4) tmp ^= 0x100; imm = -(signed short)(tmp << 2); printf("%#x\t%d\t->\t(%#x\t%d)\t%#x\t%d\n", enc, enc, (short)tmp, (short)tmp, imm, imm); } return EXIT_SUCCESS; } Which generates the table: input encoding -> tmp (matching manual) frame size ----------------------------------------------------------------------- 0 0 -> (0x100 256) 0xfffffc00 -1024 0x1 1 -> (0x101 257) 0xfffffbfc -1028 0x2 2 -> (0x2 2) 0xfffffff8 -8 0x3 3 -> (0x3 3) 0xfffffff4 -12 ... 0xfe 254 -> (0xfe 254) 0xfffffc08 -1016 0xff 255 -> (0xff 255) 0xfffffc04 -1020 0x100 256 -> (0xffffff00 -256) 0x400 1024 0x101 257 -> (0xffffff01 -255) 0x3fc 1020 ... 0x1fc 508 -> (0xfffffffc -4) 0x10 16 0x1fd 509 -> (0xfffffffd -3) 0xc 12 0x1fe 510 -> (0xfffffefe -258) 0x408 1032 0x1ff 511 -> (0xfffffeff -257) 0x404 1028 Thanks to James Hogan for the test code & verifying the logic. Fixes: 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") Suggested-by:
-
Matt Redfearn authored
The addiusp instruction uses the pool16d opcode, with bit 0 of the immediate set. The test for the addiusp opcode erroneously did a logical and of the immediate with mm_addiusp_func, which has value 1, so this test always passes when the immediate is non-zero. Fix the test by replacing the logical and with a bitwise and. Fixes: 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") Signed-off-by:
-
Matt Redfearn authored
Commit 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") added fairly broken support for handling 16bit microMIPS instructions in get_frame_info(). It adjusts the instruction pointer by 16bits in the case of a 16bit sp move instruction, but not any other 16bit instruction. Commit b6c7a324 ("MIPS: Fix get_frame_info() handling of microMIPS function size") goes some way to fixing get_frame_info() to iterate over microMIPS instuctions, but the instruction pointer is still manipulated using a postincrement, and is of union mips_instruction type. Since the union is sized to the largest member (a word), but microMIPS instructions are a mix of halfword and word sizes, the function does not always iterate correctly, ending up misaligned with the instruction stream and interpreting it incorrectly. Since the instruction modifying the stack pointer is usually the first in the function, that one is usually handled correctly. But the instruction which saves the return address to the sp is some variable number of instructions into the frame and is frequently missed due to not being on a word boundary, leading to incomplete walking of the stack. Fix this by incrementing the instruction pointer based on the size of the previously decoded instruction (& remove the hack introduced by commit 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") which adjusts the instruction pointer in the case of a 16bit sp move instruction, but not any other). Fixes: 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") Signed-off-by:
-
Jonas Gorski authored
Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: 3f0a06b0 ("MIPS: ralink: adds clkdev code") Reported-by:
Mathias Kresin <dev@kresin.me> Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16778/Signed-off-by:
-
Jonas Gorski authored
Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter, as some device drivers rely on this. Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: f8ede0f7 ("MIPS: Loongson 2F: Add CPU frequency scaling support") Reported-by:
-
Jonas Gorski authored
Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16776/Signed-off-by:
-
Jonas Gorski authored
Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: 780019dd ("MIPS: AR7: Implement clock API") Signed-off-by:
-
Jonas Gorski authored
The channels are only 0x40 bytes large, so 0x40 would be the next one's CHANCFG_REG. Also the position makes it clear that this was intended to be 0x04. So clearly a typo. Signed-off-by:
-
Corey Minyard authored
The MIPS frame save code was just saving a few registers, enough to do a backtrace if every function set up a frame. However, this is not working if you are using DWARF unwinding, because most of the registers are wrong. This was causing kdump backtraces to be short or bogus. So save all the registers. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16989/Signed-off-by:
-
Corey Minyard authored
This will allow kdump dumps to work correclty with MIPS and future DWARF unwinding of the stack to give accurate tracebacks. Signed-off-by:
-
Corey Minyard authored
Modify the SAVE_SOME macro to look more like a standard function, doing the arithmetic for the frame on the SP register instead of copying it from K1, and by saving the stored EPC from the RA. This lets the get_frame_info() function process this function like any other. It also remove an instruction or two from the kernel entry, making it more efficient. unwind_stack_by_address() has special handling for the top of the interrupt stack, but without this change unwinding will still fail if you get an interrupt while handling an interrupt and try to do a traceback from the second interrupt. This change modifies the get_saved_sp macro to optionally store the fetched value right into sp and store the old SP value into K0. Then it's just a matter of subtracting the frame from SP and storing the old SP from K0. This required changing the DADDI workaround a bit, since K0 holds the SP, we had to use K1 for AT. But it eliminated some of the special handling for the DADDI workaround. Saving the RA register was moved up to before fetching the CP0_EPC register, so the CP0_EPC register could be stored into RA and the saved. This lets the traceback code know where RA is actually stored. Signed-off-by:
-
Corey Minyard authored
I saw two problems when doing backtraces: The compiler was putting a "fast return" at the top of some functions, before it set up the frame. The backtrace code would stop when it saw a jump instruction, so it would never get to the stack frame setup and would thus misinterpret it. To fix this, don't look for jump instructions until the frame setup has been seen. The assembly code here is: ffffffff80b885a0 <serial8250_handle_irq>: ffffffff80b885a0: c8a00003 bbit0 a1,0x0,ffffffff80b885b0 <serial8250_handle_irq+0x10> ffffffff80b885a4: 0000102d move v0,zero ffffffff80b885a8: 03e00008 jr ra ffffffff80b885ac: 00000000 nop ffffffff80b885b0: 67bdffd0 daddiu sp,sp,-48 ffffffff80b885b4: ffb00008 sd s0,8(sp) The second problem was the compiler was putting the last instruction of the frame save in the delay slot of the jump instruction. If it saved the RA in there, the backtrace could would miss it and misinterpret the frame. To fix this, make sure to process the instruction after the first jump seen. The assembly code for this is: ffffffff80806fd0 <plat_irq_dispatch>: ffffffff80806fd0: 67bdffd0 daddiu sp,sp,-48 ffffffff80806fd4: ffb30020 sd s3,32(sp) ffffffff80806fd8: 24130018 li s3,24 ffffffff80806fdc: ffb20018 sd s2,24(sp) ffffffff80806fe0: 3c12811c lui s2,0x811c ffffffff80806fe4: ffb10010 sd s1,16(sp) ffffffff80806fe8: 3c11811c lui s1,0x811c ffffffff80806fec: ffb00008 sd s0,8(sp) ffffffff80806ff0: 3c10811c lui s0,0x811c ffffffff80806ff4: 08201c03 j ffffffff8080700c <plat_irq_dispa tch+0x3c> ffffffff80806ff8: ffbf0028 sd ra,40(sp) Signed-off-by:
-
Mathieu Malaterre authored
The jz4740-rtc driver supports both jz4740 & jz4780, setup the compatible string to jz4780. Signed-off-by:
Mathieu Malaterre <malat@debian.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17237/Signed-off-by:
-
Mathieu Malaterre authored
Update the Ci20's defconfig to enable the JZ4780's RTC driver. Signed-off-by:
-
- 04 Sep, 2017 25 commits
-
-
Carlos Munoz authored
Signed-off-by:
Carlos Munoz <carlos.munoz@caviumnetworks.com> Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Acked-by:
David Daney <david.daney@cavium.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17214/Signed-off-by:
-
David Daney authored
Signed-off-by:
Carlos Munoz <cmunoz@caviumnetworks.com> Signed-off-by:
Chandrakala Chavva <cchavva@caviumnetworks.com> Acked-by:
-
Steven J. Hill authored
* Update copyright and company name. * Remove unused headers. * Fix variable spelling and data type. * Use octal values for module parameters. Signed-off-by:
-
Steven J. Hill authored
Add accessor function octeon_irq_get_block_domain() for cores with a CIU3. Signed-off-by:
-
Steven J. Hill authored
Updates CSR read/write functions to be aware of nodes present in systems with CIU3 support. Signed-off-by:
-
Steven J. Hill authored
Signed-off-by:
-
Steven J. Hill authored
Signed-off-by:
-
Steven J. Hill authored
Used by the Octeon watchdog driver to get the address of the firmware boot vector. Signed-off-by:
-
Martin Blumenstingl authored
The RCU register are now access through separates drivers. remove the last pieces of the old implementation. The GPHY reset bits are now set by the GPHY driver which registers a reboot notifier. The reboot is triggered by a syscon-reboot driver and the MIPS specific parts are done by the generic MIPS implementation in arch/mips/kernel/reset.c. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: john@phrozen.org Cc: robh@kernel.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17131/Signed-off-by:
-
Hauke Mehrtens authored
This is now done in a PHY driver. Signed-off-by:
-
Hauke Mehrtens authored
This driver starts the DWC2 core(s) built into the XWAY SoCs and provides the PHY interfaces for each core. The phy instances can be passed to the dwc2 driver, which already supports the generic phy interface. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Acked-by:
Rob Herring <robh@kernel.org> Cc: martin.blumenstingl@googlemail.com Cc: john@phrozen.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17127/Signed-off-by:
-
Hauke Mehrtens authored
The GPHY loader was replaced by a new more flexible driver. Remove the old driver. Signed-off-by:
-
Martin Blumenstingl authored
Compared to the old xrx200_phy_fw driver the new version has multiple enhancements. The name of the firmware files does not have to be added to all .dts files anymore - one now configures the GPHY mode (FE or GE) instead. Each GPHY can now also boot separate firmware (thus mixing of GE and FE GPHYs is now possible). The new implementation is based on the RCU syscon-mfd and uses the reeset_controller framework instead of raw RCU register reads/writes. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
-
Hauke Mehrtens authored
This code is now replaced by a reset controller in drivers/reset/reset- lantiq-rcu.c. The old code was never used anyway. Signed-off-by:
-
Martin Blumenstingl authored
The reset controllers (on xRX200 and newer SoCs have two of them) are provided by the RCU module. This was initially implemented as a simple reset controller. However, the RCU module provides more functionality (ethernet GPHYs, USB PHY, etc.), which makes it a MFD device. The old reset controller driver implementation from arch/mips/lantiq/xway/reset.c did not honor this fact. For some devices the request and the status bits are different. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Ralf Baechle authored
This will only be used until the last usage of ltq_boot_select() has been removed. Signed-off-by: -
Hauke Mehrtens authored
Do not export the ltq_reset_cause() and ltq_boot_select() function any more. ltq_reset_cause() was accessed by the watchdog driver before to see why the last reset happened, this is now done through direct access of the register over regmap. The bits in this register are anyway different between the xrx200 and the falcon SoC. ltq_boot_select() is not used any more and was used by the flash drivers to check if the system was booted from this flash type, now the drivers should depend on the device tree only. Signed-off-by:
-
Hauke Mehrtens authored
Instead of hacking the configuration of the FPI bus into the arch code add an own bus driver for this internal bus. The FPI bus is the main bus of the SoC. This bus driver makes sure the bus is configured correctly before the child drivers are getting initialized. This driver will probably also be used on different SoCs later. Signed-off-by:
-
Hauke Mehrtens authored
This adds the initial documentation for the RCU module (a MFD device which provides USB PHYs, reset controllers and more). The RCU register range is used for multiple purposes. Mostly one device uses one or multiple register exclusively, but for some registers some bits are for one driver and some other bits are for a different driver. With this patch all accesses to the RCU registers will go through syscon. Signed-off-by:
-
Martin Blumenstingl authored
Signed-off-by:
-
Hauke Mehrtens authored
The binding was not documented before, add the documentation now. Signed-off-by:
-
Hauke Mehrtens authored
This patch avoids accessing the function ltq_reset_cause() and directly accesses the register given over the syscon interface. The syscon interface will be implemented for the xway SoCs for the falcon SoCs the ltq_reset_cause() function never worked, because a wrong offset was used. Signed-off-by:
Guenter Roeck <linux@reck-us.net> Cc: martin.blumenstingl@googlemail.com Cc: john@phrozen.org Cc: robh@kernel.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17123/Signed-off-by:
-
Hauke Mehrtens authored
Do not check which flash type the SoC was booted from before using this driver. Assume that the device tree is correct and use this driver when it was added to device tree. This also removes a build dependency to the SoC code. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: martin.blumenstingl@googlemail.com Cc: john@phrozen.org Cc: robh@kernel.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17117/Signed-off-by:
-
Martin Blumenstingl authored
This allows populating syscon devices which are using "simple-mfd" instead of "simple-bus". Signed-off-by:
-
Paul Burton authored
gic_set_affinity() manually copies the provided cpumask to the struct irq_common_data affinity field, returning IRQ_SET_MASK_OK_NOCOPY in order to prevent the core code from doing that. We can instead simply let the core code do it for us, by returning IRQ_SET_MASK_OK instead of IRQ_SET_MASK_OK_NOCOPY & doing the copy ourselves. [ralf@linux-mips.org: Resolve merge conflict.] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17056/Signed-off-by:
-
