- 15 Mar, 2022 2 commits
-
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv changes for 5.18 - Prevent KVM_COMPAT from being selected - Refine __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix, test and feature for 5.18 part 2 - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests
-
- 14 Mar, 2022 6 commits
-
-
Janis Schoetterl-Glausch authored
Test that errors occur if key protection disallows access, including tests for storage and fetch protection override. Perform tests for both logical vcpu and absolute vm ioctls. Also extend the existing tests to the vm ioctl. Signed-off-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Link: https://lore.kernel.org/r/20220308125841.3271721-6-scgl@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@linux.ibm.com>
-
Janis Schoetterl-Glausch authored
Do not just test the actual copy, but also that success is indicated when using the check only flag. Add copy test with storage key checking enabled, including tests for storage and fetch protection override. These test cover both logical vcpu ioctls as well as absolute vm ioctls. Signed-off-by:
-
Janis Schoetterl-Glausch authored
The stages synchronize guest and host execution. This helps the reader and constraits the execution of the test -- if the observed staging differs from the expected the test fails. Signed-off-by:
-
Janis Schoetterl-Glausch authored
In order to achieve good test coverage we need to be able to invoke the MEM_OP ioctl with all possible parametrizations. However, for a given test, we want to be concise and not specify a long list of default values for parameters not relevant for the test, so the readers attention is not needlessly diverted. Add a macro that enables this and convert the existing test to use it. The macro emulates named arguments and hides some of the ioctl's redundancy, e.g. sets the key flag if an access key is specified. Signed-off-by:
-
Janis Schoetterl-Glausch authored
Split success case/copy test from error test, making them independent. This means they do not share state and are easier to understand. Also, new test can be added in the same manner without affecting the old ones. In order to make that simpler, introduce functionality for the setup of commonly used variables. Signed-off-by:
-
Claudio Imbrenda authored
When handling the SCK instruction, the kvm lock is taken, even though the vcpu lock is already being held. The normal locking order is kvm lock first and then vcpu lock. This is can (and in some circumstances does) lead to deadlocks. The function kvm_s390_set_tod_clock is called both by the SCK handler and by some IOCTLs to set the clock. The IOCTLs will not hold the vcpu lock, so they can safely take the kvm lock. The SCK handler holds the vcpu lock, but will also somehow need to acquire the kvm lock without relinquishing the vcpu lock. The solution is to factor out the code to set the clock, and provide two wrappers. One is called like the original function and does the locking, the other is called kvm_s390_try_set_tod_clock and uses trylock to try to acquire the kvm lock. This new wrapper is then used in the SCK handler. If locking fails, -EAGAIN is returned, which is eventually propagated to userspace, thus also freeing the vcpu lock and allowing for forward progress. This is not the most efficient or elegant way to solve this issue, but the SCK instruction is deprecated and its performance is not critical. The goal of this patch is just to provide a simple but correct way to fix the bug. Fixes: 6a3f95a6 ("KVM: s390: Intercept SCK instruction") Signed-off-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by:
-
- 11 Mar, 2022 9 commits
-
-
Anup Patel authored
The SBI v0.3 specification extends SBI HSM extension by adding SBI HSM suspend call and related HART states. This patch extends the KVM RISC-V HSM implementation to provide KVM guest a minimal SBI HSM suspend call which is equivalent to a WFI instruction. Signed-off-by:
Anup Patel <apatel@ventanamicro.com> Reviewed-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
Anup Patel <anup@brainfault.org>
-
Anup Patel authored
The wait for interrupt (WFI) instruction emulation can share the VCPU halt logic with SBI HSM suspend emulation so this patch adds a common kvm_riscv_vcpu_wfi() function for this purpose. Signed-off-by:
-
Anup Patel authored
We add defines related to SBI HSM suspend call and also update HSM states naming as-per the latest SBI specification. Signed-off-by:
-
Anup Patel authored
The SBI v0.3 specification defines SRST (System Reset) extension which provides a standard poweroff and reboot interface. This patch implements SRST extension for the KVM Guest. Signed-off-by:
-
Anup Patel authored
We rename kvm_sbi_system_shutdown() to kvm_riscv_vcpu_sbi_system_reset() and move it to vcpu_sbi.c so that it can be shared by SBI v0.1 shutdown and SBI v0.3 SRST extension. Signed-off-by:
-
Anup Patel authored
We upgrade SBI spec version implemented by KVM RISC-V to v0.3 so that Guest kernel can probe and use SBI extensions added by the SBI v0.3 specification. Signed-off-by:
-
Vincent Chen authored
Kernel uses __kvm_riscv_switch_to() and __kvm_switch_return() to switch the context of host kernel and guest kernel. Several CSRs belonging to the context will be read and written during the context switch. To ensure atomic read-modify-write control of CSR and ordering of CSR accesses, some hardware blocks flush the pipeline when writing a CSR. In this circumstance, grouping CSR executions together as much as possible can reduce the performance impact of the pipeline. Therefore, this commit reorders the CSR instructions to enhance the context switch performance.. Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Suggested-by:
Hsinyi Lee <hsinyi.lee@sifive.com> Suggested-by:
Fu-Ching Yang <fu-ching.yang@sifive.com> Signed-off-by:
-
Guo Ren authored
Current riscv doesn't support the 32bit KVM API. Let's make it clear by not selecting KVM_COMPAT. Signed-off-by:
Guo Ren <guoren@linux.alibaba.com> Signed-off-by:
Guo Ren <guoren@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Anup Patel <anup@brainfault.org> Reviewed-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./arch/riscv/kvm/vcpu_sbi_v01.c:117:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
- 08 Mar, 2022 23 commits
-
-
Suravee Suthikulpanit authored
Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined by the architecture. The number of bits consumed by hardware is model specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM to enumerate the "true" size. So, KVM must allow using all bits, else it risks rejecting completely legal x2APIC IDs on newer CPUs. This means KVM relies on hardware to not assign x2APIC IDs that exceed the "true" width of the field, but presumably hardware is smart enough to tie the width to the max x2APIC ID. KVM also relies on hardware to support at least 8 bits, as the legacy xAPIC ID is writable by software. But, those assumptions are unavoidable due to the lack of any way to enumerate the "true" width. Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Suggested-by:
Sean Christopherson <seanjc@google.com> Reviewed-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Add a selftest that enables populating a VM with the maximum amount of guest memory allowed by the underlying architecture. Abuse KVM's memslots by mapping a single host memory region into multiple memslots so that the selftest doesn't require a system with terabytes of RAM. Default to 512gb of guest memory, which isn't all that interesting, but should work on all MMUs and doesn't take an exorbitant amount of memory or time. E.g. testing with ~64tb of guest memory takes the better part of an hour, and requires 200gb of memory for KVM's page tables when using 4kb pages. To inflicit maximum abuse on KVM' MMU, default to 4kb pages (or whatever the not-hugepage size is) in the backing store (memfd). Use memfd for the host backing store to ensure that hugepages are guaranteed when requested, and to give the user explicit control of the size of hugepage being tested. By default, spin up as many vCPUs as there are available to the selftest, and distribute the work of dirtying each 4kb chunk of memory across all vCPUs. Dirtying guest memory forces KVM to populate its page tables, and also forces KVM to write back accessed/dirty information to struct page when the guest memory is freed. On x86, perform two passes with a MMU context reset between each pass to coerce KVM into dropping all references to the MMU root, e.g. to emulate a vCPU dropping the last reference. Perform both passes and all rendezvous on all architectures in the hope that arm64 and s390x can gain similar shenanigans in the future. Measure and report the duration of each operation, which is helpful not only to verify the test is working as intended, but also to easily evaluate the performance differences different page sizes. Provide command line options to limit the amount of guest memory, set the size of each slot (i.e. of the host memory region), set the number of vCPUs, and to enable usage of hugepages. Signed-off-by:
-
Sean Christopherson authored
Add cpu_relax() for s390 and x86 for use in arch-agnostic tests. arm64 already defines its own version. Signed-off-by:
-
Sean Christopherson authored
Extract the code for allocating guest memory via memfd out of vm_userspace_mem_region_add() and into a new helper, kvm_memfd_alloc(). A future selftest to populate a guest with the maximum amount of guest memory will abuse KVM's memslots to alias guest memory regions to a single memfd-backed host region, i.e. needs to back a guest with memfd memory without a 1:1 association between a memslot and a memfd instance. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move set_memory_region_test's KVM_SET_USER_MEMORY_REGION helper to KVM's utils so that it can be used by other tests. Provide a raw version as well as an assert-success version to reduce the amount of boilerplate code need for basic usage. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Disallow calling tdp_mmu_set_spte_atomic() with a REMOVED "old" SPTE. This solves a conundrum introduced by commit 3255530a ("KVM: x86/mmu: Automatically update iter->old_spte if cmpxchg fails"); if the helper doesn't update old_spte in the REMOVED case, then theoretically the caller could get stuck in an infinite loop as it will fail indefinitely on the REMOVED SPTE. E.g. until recently, clear_dirty_gfn_range() didn't check for a present SPTE and would have spun until getting rescheduled. In practice, only the page fault path should "create" a new SPTE, all other paths should only operate on existing, a.k.a. shadow present, SPTEs. Now that the page fault path pre-checks for a REMOVED SPTE in all cases, require all other paths to indirectly pre-check by verifying the target SPTE is a shadow-present SPTE. Note, this does not guarantee the actual SPTE isn't REMOVED, nor is that scenario disallowed. The invariant is only that the caller mustn't invoke tdp_mmu_set_spte_atomic() if the SPTE was REMOVED when last observed by the caller. Cc: David Matlack <dmatlack@google.com> Signed-off-by:
-
Sean Christopherson authored
Explicitly check for a REMOVED leaf SPTE prior to attempting to map the final SPTE when handling a TDP MMU fault. Functionally, this is a nop as tdp_mmu_set_spte_atomic() will eventually detect the frozen SPTE. Pre-checking for a REMOVED SPTE is a minor optmization, but the real goal is to allow tdp_mmu_set_spte_atomic() to have an invariant that the "old" SPTE is never a REMOVED SPTE. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20220226001546.360188-24-seanjc@google.com> Signed-off-by:
-
Paolo Bonzini authored
Zap defunct roots, a.k.a. roots that have been invalidated after their last reference was initially dropped, asynchronously via the existing work queue instead of forcing the work upon the unfortunate task that happened to drop the last reference. If a vCPU task drops the last reference, the vCPU is effectively blocked by the host for the entire duration of the zap. If the root being zapped happens be fully populated with 4kb leaf SPTEs, e.g. due to dirty logging being active, the zap can take several hundred seconds. Unsurprisingly, most guests are unhappy if a vCPU disappears for hundreds of seconds. E.g. running a synthetic selftest that triggers a vCPU root zap with ~64tb of guest memory and 4kb SPTEs blocks the vCPU for 900+ seconds. Offloading the zap to a worker drops the block time to <100ms. There is an important nuance to this change. If the same work item was queued twice before the work function has run, it would only execute once and one reference would be leaked. Therefore, now that queueing and flushing items is not anymore protected by kvm->slots_lock, kvm_tdp_mmu_invalidate_all_roots() has to check root->role.invalid and skip already invalid roots. On the other hand, kvm_mmu_zap_all_fast() must return only after those skipped roots have been zapped as well. These two requirements can be satisfied only if _all_ places that change invalid to true now schedule the worker before releasing the mmu_lock. There are just two, kvm_tdp_mmu_put_root() and kvm_tdp_mmu_invalidate_all_roots(). Co-developed-by:
-
Sean Christopherson authored
When zapping a TDP MMU root, perform the zap in two passes to avoid zapping an entire top-level SPTE while holding RCU, which can induce RCU stalls. In the first pass, zap SPTEs at PG_LEVEL_1G, and then zap top-level entries in the second pass. With 4-level paging, zapping a PGD that is fully populated with 4kb leaf SPTEs take up to ~7 or so seconds (time varies based on kernel config, number of (v)CPUs, etc...). With 5-level paging, that time can balloon well into hundreds of seconds. Before remote TLB flushes were omitted, the problem was even worse as waiting for all active vCPUs to respond to the IPI introduced significant overhead for VMs with large numbers of vCPUs. By zapping 1gb SPTEs (both shadow pages and hugepages) in the first pass, the amount of work that is done without dropping RCU protection is strictly bounded, with the worst case latency for a single operation being less than 100ms. Zapping at 1gb in the first pass is not arbitrary. First and foremost, KVM relies on being able to zap 1gb shadow pages in a single shot when when repacing a shadow page with a hugepage. Zapping a 1gb shadow page that is fully populated with 4kb dirty SPTEs also triggers the worst case latency due writing back the struct page accessed/dirty bits for each 4kb page, i.e. the two-pass approach is guaranteed to work so long as KVM can cleany zap a 1gb shadow page. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 52-....: (20999 ticks this GP) idle=7be/1/0x4000000000000000 softirq=15759/15759 fqs=5058 (t=21016 jiffies g=66453 q=238577) NMI backtrace for cpu 52 Call Trace: ... mark_page_accessed+0x266/0x2f0 kvm_set_pfn_accessed+0x31/0x40 handle_removed_tdp_mmu_page+0x259/0x2e0 __handle_changed_spte+0x223/0x2c0 handle_removed_tdp_mmu_page+0x1c1/0x2e0 __handle_changed_spte+0x223/0x2c0 handle_removed_tdp_mmu_page+0x1c1/0x2e0 __handle_changed_spte+0x223/0x2c0 zap_gfn_range+0x141/0x3b0 kvm_tdp_mmu_zap_invalidated_roots+0xc8/0x130 kvm_mmu_zap_all_fast+0x121/0x190 kvm_mmu_invalidate_zap_pages_in_memslot+0xe/0x10 kvm_page_track_flush_slot+0x5c/0x80 kvm_arch_flush_shadow_memslot+0xe/0x10 kvm_set_memslot+0x172/0x4e0 __kvm_set_memory_region+0x337/0x590 kvm_vm_ioctl+0x49c/0xf80 Reported-by:David Matlack <dmatlack@google.com> Cc: Ben Gardon <bgardon@google.com> Cc: Mingwei Zhang <mizhang@google.com> Signed-off-by:
-
Paolo Bonzini authored
Allow yielding when zapping SPTEs after the last reference to a valid root is put. Because KVM must drop all SPTEs in response to relevant mmu_notifier events, mark defunct roots invalid and reset their refcount prior to zapping the root. Keeping the refcount elevated while the zap is in-progress ensures the root is reachable via mmu_notifier until the zap completes and the last reference to the invalid, defunct root is put. Allowing kvm_tdp_mmu_put_root() to yield fixes soft lockup issues if the root in being put has a massive paging structure, e.g. zapping a root that is backed entirely by 4kb pages for a guest with 32tb of memory can take hundreds of seconds to complete. watchdog: BUG: soft lockup - CPU#49 stuck for 485s! [max_guest_memor:52368] RIP: 0010:kvm_set_pfn_dirty+0x30/0x50 [kvm] __handle_changed_spte+0x1b2/0x2f0 [kvm] handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm] __handle_changed_spte+0x1f4/0x2f0 [kvm] handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm] __handle_changed_spte+0x1f4/0x2f0 [kvm] tdp_mmu_zap_root+0x307/0x4d0 [kvm] kvm_tdp_mmu_put_root+0x7c/0xc0 [kvm] kvm_mmu_free_roots+0x22d/0x350 [kvm] kvm_mmu_reset_context+0x20/0x60 [kvm] kvm_arch_vcpu_ioctl_set_sregs+0x5a/0xc0 [kvm] kvm_vcpu_ioctl+0x5bd/0x710 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae KVM currently doesn't put a root from a non-preemptible context, so other than the mmu_notifier wrinkle, yielding when putting a root is safe. Yield-unfriendly iteration uses for_each_tdp_mmu_root(), which doesn't take a reference to each root (it requires mmu_lock be held for the entire duration of the walk). tdp_mmu_next_root() is used only by the yield-friendly iterator. tdp_mmu_zap_root_work() is explicitly yield friendly. kvm_mmu_free_roots() => mmu_free_root_page() is a much bigger fan-out, but is still yield-friendly in all call sites, as all callers can be traced back to some combination of vcpu_run(), kvm_destroy_vm(), and/or kvm_create_vm(). Signed-off-by:
-
Paolo Bonzini authored
Use the system worker threads to zap the roots invalidated by the TDP MMU's "fast zap" mechanism, implemented by kvm_tdp_mmu_invalidate_all_roots(). At this point, apart from allowing some parallelism in the zapping of roots, the workqueue is a glorified linked list: work items are added and flushed entirely within a single kvm->slots_lock critical section. However, the workqueue fixes a latent issue where kvm_mmu_zap_all_invalidated_roots() assumes that it owns a reference to all invalid roots; therefore, no one can set the invalid bit outside kvm_mmu_zap_all_fast(). Putting the invalidated roots on a linked list... erm, on a workqueue ensures that tdp_mmu_zap_root_work() only puts back those extra references that kvm_mmu_zap_all_invalidated_roots() had gifted to it. Signed-off-by: -
Sean Christopherson authored
Defer TLB flushes to the caller when freeing TDP MMU shadow pages instead of immediately flushing. Because the shadow pages are freed in an RCU callback, so long as at least one CPU holds RCU, all CPUs are protected. For vCPUs running in the guest, i.e. consuming TLB entries, KVM only needs to ensure the caller services the pending TLB flush before dropping its RCU protections. I.e. use the caller's RCU as a proxy for all vCPUs running in the guest. Deferring the flushes allows batching flushes, e.g. when installing a 1gb hugepage and zapping a pile of SPs. And when zapping an entire root, deferring flushes allows skipping the flush entirely (because flushes are not needed in that case). Avoiding flushes when zapping an entire root is especially important as synchronizing with other CPUs via IPI after zapping every shadow page can cause significant performance issues for large VMs. The issue is exacerbated by KVM zapping entire top-level entries without dropping RCU protection, which can lead to RCU stalls even when zapping roots backing relatively "small" amounts of guest memory, e.g. 2tb. Removing the IPI bottleneck largely mitigates the RCU issues, though it's likely still a problem for 5-level paging. A future patch will further address the problem by zapping roots in multiple passes to avoid holding RCU for an extended duration. Reviewed-by:
-
Sean Christopherson authored
When yielding in the TDP MMU iterator, service any pending TLB flush before dropping RCU protections in anticipation of using the caller's RCU "lock" as a proxy for vCPUs in the guest. Signed-off-by:
-
Sean Christopherson authored
Zap only leaf SPTEs in the TDP MMU's zap_gfn_range(), and rename various functions accordingly. When removing mappings for functional correctness (except for the stupid VFIO GPU passthrough memslots bug), zapping the leaf SPTEs is sufficient as the paging structures themselves do not point at guest memory and do not directly impact the final translation (in the TDP MMU). Note, this aligns the TDP MMU with the legacy/full MMU, which zaps only the rmaps, a.k.a. leaf SPTEs, in kvm_zap_gfn_range() and kvm_unmap_gfn_range(). Signed-off-by:
-
Sean Christopherson authored
Now that all callers of zap_gfn_range() hold mmu_lock for write, drop support for zapping with mmu_lock held for read. That all callers hold mmu_lock for write isn't a random coincidence; now that the paths that need to zap _everything_ have their own path, the only callers left are those that need to zap for functional correctness. And when zapping is required for functional correctness, mmu_lock must be held for write, otherwise the caller has no guarantees about the state of the TDP MMU page tables after it has run, e.g. the SPTE(s) it zapped can be immediately replaced by a vCPU faulting in a page. Signed-off-by:
-
Sean Christopherson authored
Add a dedicated helper for zapping a TDP MMU root, and use it in the three flows that do "zap_all" and intentionally do not do a TLB flush if SPTEs are zapped (zapping an entire root is safe if and only if it cannot be in use by any vCPU). Because a TLB flush is never required, unconditionally pass "false" to tdp_mmu_iter_cond_resched() when potentially yielding. Opportunistically document why KVM must not yield when zapping roots that are being zapped by kvm_tdp_mmu_put_root(), i.e. roots whose refcount has reached zero, and further harden the flow to detect improper KVM behavior with respect to roots that are supposed to be unreachable. In addition to hardening zapping of roots, isolating zapping of roots will allow future simplification of zap_gfn_range() by having it zap only leaf SPTEs, and by removing its tricky "zap all" heuristic. By having all paths that truly need to free _all_ SPs flow through the dedicated root zapper, the generic zapper can be freed of those concerns. Signed-off-by:
-
Sean Christopherson authored
Don't flush the TLBs when zapping all TDP MMU pages, as the only time KVM uses the slow version of "zap everything" is when the VM is being destroyed or the owning mm has exited. In either case, KVM_RUN is unreachable for the VM, i.e. the guest TLB entries cannot be consumed. Signed-off-by:
Mingwei Zhang <mizhang@google.com> Signed-off-by:
-
Sean Christopherson authored
When recovering a potential hugepage that was shattered for the iTLB multihit workaround, precisely zap only the target page instead of iterating over the TDP MMU to find the SP that was passed in. This will allow future simplification of zap_gfn_range() by having it zap only leaf SPTEs. Signed-off-by:
-
Sean Christopherson authored
Refactor __tdp_mmu_set_spte() to work with raw values instead of a tdp_iter objects so that a future patch can modify SPTEs without doing a walk, and without having to synthesize a tdp_iter. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
WARN if the new_spte being set by __tdp_mmu_set_spte() is a REMOVED_SPTE, which is called out by the comment as being disallowed but not actually checked. Keep the WARN on the old_spte as well, because overwriting a REMOVED_SPTE in the non-atomic path is also disallowed (as evidence by lack of splats with the existing WARN). Fixes: 08f07c80 ("KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler") Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Add helpers to read and write TDP MMU SPTEs instead of open coding rcu_dereference() all over the place, and to provide a convenient location to document why KVM doesn't exempt holding mmu_lock for write from having to hold RCU (and any future changes to the rules). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop RCU protection after processing each root when handling MMU notifier hooks that aren't the "unmap" path, i.e. aren't zapping. Temporarily drop RCU to let RCU do its thing between roots, and to make it clear that there's no special behavior that relies on holding RCU across all roots. Currently, the RCU protection is completely superficial, it's necessary only to make rcu_dereference() of SPTE pointers happy. A future patch will rely on holding RCU as a proxy for vCPUs in the guest, e.g. to ensure shadow pages aren't freed before all vCPUs do a TLB flush (or rather, acknowledge the need for a flush), but in that case RCU needs to be held until the flush is complete if and only if the flush is needed because a shadow page may have been removed. And except for the "unmap" path, MMU notifier events cannot remove SPs (don't toggle PRESENT bit, and can't change the PFN for a SP). Signed-off-by:
-
Sean Christopherson authored
Batch TLB flushes (with other MMUs) when handling ->change_spte() notifications in the TDP MMU. The MMU notifier path in question doesn't allow yielding and correcty flushes before dropping mmu_lock. Signed-off-by:
-
