- 26 Jun, 2023 1 commit
-
-
Edward Cree authored
Add two bytes of padding to the start of struct efx_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 24 Jun, 2023 39 commits
-
-
Jakub Kicinski authored
David Howells says: ==================== splice, net: Switch over users of sendpage() and remove it Here's the final set of patches towards the removal of sendpage. All the drivers that use sendpage() get switched over to using sendmsg() with MSG_SPLICE_PAGES. The following changes are made: (1) Make the protocol drivers behave according to MSG_MORE, not MSG_SENDPAGE_NOTLAST. The latter is restricted to turning on MSG_MORE in the sendpage() wrappers. (2) Fix ocfs2 to allocate its global protocol buffers with folio_alloc() rather than kzalloc() so as not to invoke the !sendpage_ok warning in skb_splice_from_iter(). (3) Make ceph/rds, skb_send_sock, dlm, nvme, smc, ocfs2, drbd and iscsi use sendmsg(), not sendpage and make them specify MSG_MORE instead of MSG_SENDPAGE_NOTLAST. (4) Kill off sendpage and clean up MSG_SENDPAGE_NOTLAST. Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=51c78a4d532efe9543a4df019ff405f05c6157f6 # part 1 Link: https://lore.kernel.org/r/20230616161301.622169-1-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20230617121146.716077-1-dhowells@redhat.com/ # v2 Link: https://lore.kernel.org/r/20230620145338.1300897-1-dhowells@redhat.com/ # v3 ==================== Link: https://lore.kernel.org/r/20230623225513.2732256-1-dhowells@redhat.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Now that ->sendpage() has been removed, MSG_SENDPAGE_NOTLAST can be cleaned up. Things were converted to use MSG_MORE instead, but the protocol sendpage stubs still convert MSG_SENDPAGE_NOTLAST to MSG_MORE, which is now unnecessary. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-17-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by:
-
David Howells authored
Switch ocfs2 from using sendpage() to using sendmsg() + MSG_SPLICE_PAGES so that sendpage can be phased out. Signed-off-by:
-
David Howells authored
ocfs2 uses kzalloc() to allocate buffers for o2net_hand, o2net_keep_req and o2net_keep_resp and then passes these to sendpage. This isn't really allowed as the lifetime of slab objects is not controlled by page ref - though in this case it will probably work. sendmsg() with MSG_SPLICE_PAGES will, however, print a warning and give an error. Fix it to use folio_alloc() instead to allocate a buffer for the handshake message, keepalive request and reply messages. Fixes: 98211489 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by:
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows multiple pages and multipage folios to be passed through. TODO: iscsit_fe_sendpage_sg() should perhaps set up a bio_vec array for the entire set of pages it's going to transfer plus two for the header and trailer and page fragments to hold the header and trailer - and then call sendmsg once for the entire message. Signed-off-by:
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows multiple pages and multipage folios to be passed through. Signed-off-by:
Mike Christie <michael.christie@oracle.com> cc: Lee Duncan <lduncan@suse.com> cc: Chris Leech <cleech@redhat.com> cc: "James E.J. Bottomley" <jejb@linux.ibm.com> cc: "Martin K. Petersen" <martin.petersen@oracle.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: open-iscsi@googlegroups.com Link: https://lore.kernel.org/r/20230623225513.2732256-12-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Use sendmsg() conditionally with MSG_SPLICE_PAGES in _drbd_send_page() rather than calling sendpage() or _drbd_no_send_page(). Signed-off-by:
-
David Howells authored
Drop the smc_sendpage() code as smc_sendmsg() just passes the call down to the underlying TCP socket and smc_tx_sendpage() is just a wrapper around its sendmsg implementation. Signed-off-by:
-
David Howells authored
When transmitting data, call down into TCP using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather than copied instead of calling sendpage. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Acked-by:
Willem de Bruijn <willemb@google.com> cc: Keith Busch <kbusch@kernel.org> cc: Jens Axboe <axboe@fb.com> cc: Christoph Hellwig <hch@lst.de> cc: Chaitanya Kulkarni <kch@nvidia.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-nvme@lists.infradead.org Link: https://lore.kernel.org/r/20230623225513.2732256-9-dhowells@redhat.comSigned-off-by:
-
David Howells authored
When transmitting data, call down into TCP using a sendmsg with MSG_SPLICE_PAGES instead of sendpage. Signed-off-by:
-
David Howells authored
When transmitting data, call down a layer using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather using sendpage. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
-
David Howells authored
When transmitting data, call down into TCP using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced. To make this work, the data is assembled in a bio_vec array and attached to a BVEC-type iterator. Signed-off-by:
-
David Howells authored
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when transmitting data. For the moment, this can only transmit one page at a time because of the architecture of net/ceph/, but if write_partial_message_data() can be given a bvec[] at a time by the iteration code, this would allow pages to be sent in a batch. Signed-off-by:
-
David Howells authored
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when transmitting data. For the moment, this can only transmit one page at a time because of the architecture of net/ceph/, but if write_partial_message_data() can be given a bvec[] at a time by the iteration code, this would allow pages to be sent in a batch. Signed-off-by:
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage in skb_send_sock(). This causes pages to be spliced from the source iterator if possible. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Note that this could perhaps be improved to fill out a bvec array with all the frags and then make a single sendmsg call, possibly sticking the header on the front also. Signed-off-by:
-
David Howells authored
As MSG_SENDPAGE_NOTLAST is being phased out along with sendpage(), don't use it further in than the sendpage methods, but rather translate it to MSG_MORE and use that instead. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-06-21 mlx5 driver minor cleanup and fixes to net-next * tag 'mlx5-updates-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type() net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id() net/mlx5: Remove redundant is_mdev_switchdev_mode() check from is_ib_rep_supported() net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from is_ib_rep_supported() net/mlx5e: E-Switch, Fix shared fdb error flow net/mlx5e: Remove redundant comment net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0 net/mlx5e: E-Switch, Use xarray for devcom paired device index net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpf net/mlx5e: Use vhca_id for device index in vport rx rules net/mlx5: Lag, Remove duplicate code checking lag is supported net/mlx5: Fix error code in mlx5_is_reset_now_capable() net/mlx5: Fix reserved at offset in hca_cap register net/mlx5: Fix SFs kernel documentation error net/mlx5: Fix UAF in mlx5_eswitch_cleanup() ==================== Link: https://lore.kernel.org/r/20230623192907.39033-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Donald Hunter says: ==================== netlink: add display-hint to ynl Add a display-hint property to the netlink schema, to be used by generic netlink clients as hints about how to display attribute values. A display-hint on an attribute definition is intended for letting a client such as ynl know that, for example, a u32 should be rendered as an ipv4 address. The display-hint enumeration includes a small number of networking domain-specific value types. ==================== Link: https://lore.kernel.org/r/20230623201928.14275-1-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Add display hints for mac, ipv4, ipv6, hex and uuid to the ovs_flow schema. Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230623201928.14275-4-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Add support to the ynl tool for rendering output based on display-hint properties. Signed-off-by:
-
Donald Hunter authored
Add a display-hint property to the netlink schema that is for providing optional hints to generic netlink clients about how to display attribute values. A display-hint on an attribute definition is intended for letting a client such as ynl know that, for example, a u32 should be rendered as an ipv4 address. The display-hint enumeration includes a small number of networking domain-specific value types. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next Miquel Raynal says: ==================== Core WPAN changes: - Support for active scans - Support for answering BEACON_REQ - Specific MLME handling for limited devices WPAN driver changes: - ca8210: - Flag the devices as limited - Remove stray gpiod_unexport() call * tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next: ieee802154: ca8210: Remove stray gpiod_unexport() call ieee802154: ca8210: Flag the driver as being limited net: ieee802154: Handle limited devices with only datagram support mac802154: Handle received BEACON_REQ ieee802154: Add support for allowing to answer BEACON_REQ mac802154: Handle active scanning ieee802154: Add support for user active scan requests ==================== Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== selftests: mptcp: Refactoring and minor fixes Patch 1 moves code around for clarity and improved code reuse. Patch 2 makes use of new MPTCP info that consolidates MPTCP-level and subflow-level information. Patches 3-7 refactor code to favor limited-scope environment vars over optional parameters. Patch 8: typo fix ==================== Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-0-a883213c8ba9@kernel.orgSigned-off-by:
-
Yueh-Shun Li authored
Spell "transmissions" properly. Found by searching for keyword "tranm". Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Yueh-Shun Li <shamrocklee@posteo.net> Signed-off-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-8-a883213c8ba9@kernel.orgSigned-off-by:
-
Geliang Tang authored
This patch moves endpoint settings out of do_transfer() into a new helper pm_nl_set_endpoint(). And invoke this helper in do_transfer(). This makes the code much more clearer. Reviewed-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Geliang Tang authored
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "sflags=*" instead of positional parameter sflags of do_transfer() and run_tests(). Reviewed-by: -
Geliang Tang authored
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer() and run_tests(). Reviewed-by: -
Geliang Tang authored
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "test_linkfail=*" instead of positional parameter test_linkfail of do_transfer() and run_tests(). Reviewed-by: -
Geliang Tang authored
Set FAILING_LINKS as an env var with a limited scope only when calling run_tests(). Reviewed-by:
-
Geliang Tang authored
New MPTCP info are being checked in multiple places to improve the code coverage when using the userspace PM. This patch makes chk_mptcp_info() more generic to be able to check subflows, add_addr_signal and add_addr_accepted info (and even more later). New arguments are now required to get different infos from the two namespaces because some counters are specific to the client or the server. Reviewed-by:
-
Geliang Tang authored
This patch moves userspace pm tests out of do_transfer(). Move add address test into a new function userspace_pm_add_addr(), and remove address test into userspace_pm_rm_sf_addr_ns1(). Move add subflow test into userspace_pm_add_sf() and remove subflow into userspace_pm_rm_sf_addr_ns2(). Reviewed-by:
-
Jakub Kicinski authored
Bartosz Golaszewski says: ==================== net: stmmac: introduce devres helpers for stmmac platform drivers The goal of this series is two-fold: to make the API for stmmac platforms more logically correct (by providing functions that acquire resources with release counterparts that undo only their actions and nothing more) and to provide devres variants of commonly use registration functions that allows to significantly simplify the platform drivers. The current pattern for stmmac platform drivers is to call stmmac_probe_config_dt(), possibly the platform's init() callback and then call stmmac_drv_probe(). The resources allocated by these calls will then be released by calling stmmac_pltfr_remove(). This goes against the commonly accepted way of providing each function that allocated a resource with a function that frees it. First: provide wrappers around platform's init() and exit() callbacks that allow users to skip checking if the callbacks exist manually. Second: provide stmmac_pltfr_probe() which calls the platform init() callback and then calls stmmac_drv_probe() together with a variant of stmmac_pltfr_remove() that DOES NOT call stmmac_remove_config_dt(). For now this variant is called stmmac_pltfr_remove_no_dt() but once all users of the old stmmac_pltfr_remove() are converted to the devres helper, it will be renamed back to stmmac_pltfr_remove() and the no_dt function removed. Finally use the devres helpers in dwmac-qco-ethqos to show how much simplier the driver's probe() becomes. This series obviously just starts the conversion process and other platform drivers will need to be converted once the helpers land in net/. ==================== Link: https://lore.kernel.org/r/20230623100417.93592-1-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
Use the devres variant of stmmac_pltfr_probe() and finally drop the remove() callback entirely. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-12-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
Provide a devres variant of stmmac_pltfr_probe() which allows users to skip calling stmmac_pltfr_remove() at driver detach. Signed-off-by:
-
Bartosz Golaszewski authored
Significantly simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). This allows to drop the goto jumps entirely. The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by:
-
Bartosz Golaszewski authored
Provide a devres variant of stmmac_probe_config_dt() that allows users to skip calling stmmac_remove_config_dt() at driver detach. Signed-off-by:
-
Bartosz Golaszewski authored
Add a variant of stmmac_pltfr_remove() that only frees resources allocated by stmmac_pltfr_probe() and - unlike stmmac_pltfr_remove() - does not call stmmac_remove_config_dt(). Signed-off-by:
-
Bartosz Golaszewski authored
Shrink the code and remove labels by using the new stmmac_pltfr_probe() function. Signed-off-by:
-
