- 18 Aug, 2023 6 commits
-
-
Manivannan Sadhasivam authored
Both the function arguments and the definition could be wrapped to 80 columns to save line space. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230805174146.57006-7-manivannan.sadhasivam@linaro.org
-
Manivannan Sadhasivam authored
Checkpatch complains over the usage of ENOTSUPP for new patches as below: WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP So let's fix the error code which is already present in qcom_check_op(). Signed-off-by:
-
Manivannan Sadhasivam authored
qcom_check_op() function checks for the invalid opcode for the instruction types. Currently, it just returns -ENOTSUPP for all opcodes of NAND_OP_CMD_INSTR type due to the use of "||" operator instead of "&&". Fix it! This also fixes the following smatch warning: drivers/mtd/nand/raw/qcom_nandc.c:3036 qcom_check_op() warn: was && intended here instead of ||? Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202308032022.SnXkKyFs-lkp@intel.com/ Fixes: 89550beb ("mtd: rawnand: qcom: Implement exec_op()") Signed-off-by:
-
Manivannan Sadhasivam authored
Handle the scenario where the caller has passed an unsupported opcode to qcom_op_cmd_mapping(). In that case, log the error and return the -EOPNOTSUPP errono. Also, let's propagate this error code all the way up. This also fixes the following smatch warning: drivers/mtd/nand/raw/qcom_nandc.c:2941 qcom_op_cmd_mapping() error: uninitialized symbol 'ret'. Reported-by:
-
Manivannan Sadhasivam authored
qcom_op_cmd_mapping() function accepts opcode and returns the corresponding command register. So let's rename the local variables and parameters to reflect the same. Reported-by:
-
Manivannan Sadhasivam authored
In all the cases, "ret" variable is assigned a value before returning it. So there is no need to explicitly initialize it with 0. Signed-off-by:
-
- 04 Aug, 2023 2 commits
-
-
Zhu Wang authored
Since platform_get_irq() never returned zero, so it need not to check whether it returned zero, and we use the return error code of platform_get_irq() to replace the current return error code, for that platform_get_irq() may return -EINVAL or -ENXIO. Signed-off-by:
Zhu Wang <wangzhu9@huawei.com> Signed-off-by:
-
Li Zetao authored
Convert platform_get_resource_byname() + devm_ioremap_resource() to a single call to devm_platform_ioremap_resource_byname(), as this is exactly what this function does. Signed-off-by:
Li Zetao <lizetao1@huawei.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
- 28 Jul, 2023 9 commits
-
-
Arseniy Krasnov authored
Fixes the following build error: drivers/mtd/nand/raw/meson_nand.c:244:59: error: initializer element is not a compile-time constant static const struct nand_ecc_step_info axg_stepinfo[] = { axg_stepinfo_1024, axg_stepinfo_512 }; ^~~~~~~~~~~~~~~~~ Fixes: 0e1db393 ("mtd: rawnand: meson: support for 512B ECC step size") Reported-by:Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by:
-
Miquel Raynal authored
The naddrs variable is initialized but not used. Fixing this could have been a matter of dropping the variable, but the right way to do it looks a bit more complex: we can avoid useless writes to the q_op structure by using it. In practice we could even have possible out-of-bound bugs with the existing implementation. Let's fix all that by just performing the right number of assignments in the addr{1,2}_reg fields. Fixes: 89550beb ("mtd: rawnand: qcom: Implement exec_op()") Reported-by:Manivannan Sadhasivam <mani@kernel.org> Reviewed-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/linux-mtd/20230716144612.32132-9-miquel.raynal@bootlin.com
-
Miquel Raynal authored
Instead of allocating a structure on the stack with random data and then expect the callee to perform the initialization (which is, in general, error prone), prefer zeroing the structure explicitly at allocation and provide the already zeroed area, so no explicit memset operation is needed. It is probably safer to do so, so we limit the timeframe when dirty data could actually be accessed by mistake. Signed-off-by:
-
Miquel Raynal authored
Fix the following checkpatch warning: CHECK: 'tranasction' may be misspelled - perhaps 'transaction'? Signed-off-by:
-
Miquel Raynal authored
The main "for" loop in qcom_read_status_exec() does guard the following to if's which are badly indented. Fix the indentation. Signed-off-by:
-
Miquel Raynal authored
Fix following checkpatch warning: "CHECK: Please don't use multiple blank lines" "CHECK: Please use a blank line after function/struct/union/enum declarations" Signed-off-by:
-
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Alignment should match open parenthesis" Signed-off-by: -
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Prefer kernel type 'u8' over 'uint8_t'" Signed-off-by: -
Miquel Raynal authored
Fix the following checkpatch warning: "CHECK: Prefer using the BIT macro" Signed-off-by:
-
- 27 Jul, 2023 3 commits
-
-
Rafał Miłecki authored
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet. It's important to pass that error up so device will get probed later. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
William Zhang <william.zhang@broadcom.com> Signed-off-by:
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size. Signed-off-by:
-
Arseniy Krasnov authored
ECC properties 'nand-ecc-strength' and 'nand-ecc-step-size' depends on each other, so they must be both either set or not set. In first case ECC core will try to use these values if possible (by checking ECC caps provided by driver), in second case ECC core will select most optimal values for both properties. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Jul, 2023 7 commits
-
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size, so replace 'const' for only 1024B step size with enum for both sizes. Signed-off-by:
-
Miquel Raynal authored
Binding files should be dual licensed. This file was initially written as a .txt file with no specific license, so was implicitely GPLv2. Significant part of this file and its conversion into yaml were written by Bootlin employees which agree to comply with the rules regarding the dual licensing so let's fix the SPDX tag to reflect the correct license by changing it from GPL to GPL + BSD-2-Clause. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/linux-mtd/20230712151042.433593-1-miquel.raynal@bootlin.com
-
Chris Packham authored
Add support for the AC5/AC5X SoC from Marvell. The NFC on this SoC only supports SDR modes up to 3. Marvell's SDK includes some predefined values for the ndtr registers. These haven't been incorporated as the existing code seems to get good values based on measurements taken with an oscilloscope. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Chris Packham authored
Add binding for AC5 SoC. This SoC only supports NAND SDR timings up to mode 3 so a specific compatible value is needed. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Md Sadre Alam authored
Remove legacy interface implementation Co-developed-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by:
Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by:
-
Md Sadre Alam authored
Implement exec_op() so we can later get rid of the legacy interface implementation. Co-developed-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Signed-off-by:
-
- 12 Jul, 2023 13 commits
-
-
Yangtao Li authored
mtd: nand: samsung: Convert to devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() Use devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
William Zhang authored
brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d ("mtd: rawnand: Initialize the nand_device object") Signed-off-by:
-
William Zhang authored
When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
-
William Zhang authored
When executing a NAND command within the panic write path, wait for any pending command instead of calling BUG_ON to avoid crashing while already crashing. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Kursad Oney <kursad.oney@broadcom.com> Reviewed-by:
Kamal Dasu <kamal.dasu@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
