The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.

[1] dmesg WARN_ON log and following refcnt errors
 WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
 CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G        W         5.13.0-rc3+ #360
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
 FS:  0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
 Call Trace:
  br_handle_vlan+0xbc/0xca [bridge]
  __br_forward+0x23/0x164 [bridge]
  deliver_clone+0x41/0x48 [bridge]
  br_handle_frame_finish+0x36f/0x3aa [bridge]
  ? skb_dst+0x2e/0x38 [bridge]
  ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  br_handle_frame+0x2c3/0x377 [bridge]
  ? __skb_pull+0x33/0x51
  ? vlan_do_receive+0x4f/0x36a
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  __netif_receive_skb_core+0x539/0x7c6
  ? __list_del_entry_valid+0x16e/0x1c2
  __netif_receive_skb_list_core+0x6d/0xd6
  netif_receive_skb_list_internal+0x1d9/0x1fa
  gro_normal_list+0x22/0x3e
  dev_gro_receive+0x55b/0x600
  ? detach_buf_split+0x58/0x140
  napi_gro_receive+0x94/0x12e
  virtnet_poll+0x15d/0x315 [virtio_net]
  __napi_poll+0x2c/0x1c9
  net_rx_action+0xe6/0x1fb
  __do_softirq+0x115/0x2d8
  run_ksoftirqd+0x18/0x20
  smpboot_thread_fn+0x183/0x19c
  ? smpboot_unregister_percpu_thread+0x66/0x66
  kthread+0x10a/0x10f
  ? kthread_mod_delayed_work+0xb6/0xb6
  ret_from_fork+0x22/0x30
 ---[ end trace 49f61b07f775fd2b ]---
 dst_release: dst:00000000c02d677a refcnt:-1
 dst_release underflow

Cc: stable@vger.kernel.org
Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path.

Cc: stable@vger.kernel.org
Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function 'ping_queue_rcv_skb' not always return success, which will
also return fail. If not check the wrong return value of it, lead to function
`ping_rcv` return success.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

msg_zerocopy signals if a send operation required copying with a flag
in serr->ee.ee_code.

This field can be incorrect as of the below commit, as a result of
both structs uarg and serr pointing into the same skb->cb[].

uarg->zerocopy must be read before skb->cb[] is reinitialized to hold
serr. Similar to other fields len, hi and lo, use a local variable to
temporarily hold the value.

This was not a problem before, when the value was passed as a function
argument.

Fixes: 75518851 ("skbuff: Push status and refcounts into sock_zerocopy_callback")
Reported-by: Talal Ahmad <talalahmad@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2021-06-09
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. So, prohibit
setting of tx-gre-csum-segmentation and let it be: off[fixed].

Fixes: 27299841 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. Hence, block
setting of tx-udp_tnl-csum-segmentation and set it to off[fixed].

Fixes: b49663c8 ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In the scenario described below, an EQ can remain in FIRED state which
can result in missing an interrupt generation.

The scenario:

device                       mlx5_core driver
------                       ----------------
EQ1.eqe generated
EQ1.MSI-X sent
EQ1.state = FIRED
EQ2.eqe generated
                             mlx5_irq()
                               polls - eq1_eqes()
                               arm eq1
                               polls - eq2_eqes()
                               arm eq2
EQ2.MSI-X sent
EQ2.state = FIRED
                              mlx5_irq()
                              polls - eq2_eqes() -- no eqes found
                              driver skips EQ arming;

->EQ2 remains fired, misses generating interrupt.

Hence, always arm the EQ by reverting the cited commit in fixes tag.

Fixes: d894892d ("net/mlx5: Arm only EQs with EQEs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Steering packets to PTP-SQ should be done only if the SKB has
SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into
a header and inline it.
Set the whole condition to select the PTP-SQ to unlikely.

Fixes: 24c22dd0 ("net/mlx5e: Add states to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since the driver opens the PTP-RQ under channel 0, it appears to the
stack as if the SKB was received on rxq0. So from thew stack POV there
are still the same number of RX queues.

Fixes: 960fbfe2 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When changing eswitch mode, the netdev is detached from the
hardware resources. So verify dev is present in get devlink
port ndo. Otherwise, we will hit the following panic:

[241535.973539] RIP: 0010:__devlink_port_phys_port_name_get+0x13/0x1b0
[241535.976471] RSP: 0018:ffff9eaf0ae1b7c8 EFLAGS: 00010292
[241535.977471] RAX: 000000000002d370 RBX: 000000000002d370 RCX: 0000000000000000
[241535.978479] RDX: 0000000000000010 RSI: ffff9eaf0ae1b858 RDI: 000000000002d370
[241535.979482] RBP: ffff9eaf0ae1b7e0 R08: 000000000000002a R09: ffff8888d54d13da
[241535.980486] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8888e6700000
[241535.981491] R13: ffff9eaf0ae1b858 R14: 0000000000000010 R15: 0000000000000000
[241535.982489] FS:  00007fd374ef3740(0000) GS:ffff88909ea00000(0000) knlGS:0000000000000000
[241535.983494] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[241535.984487] CR2: 000000000002d444 CR3: 000000089fd26006 CR4: 00000000003706e0
[241535.985502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[241535.986499] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[241535.987477] Call Trace:
[241535.988426]  ? nla_put_64bit+0x71/0xa0
[241535.989368]  devlink_compat_phys_port_name_get+0x50/0xa0
[241535.990312]  dev_get_phys_port_name+0x4b/0x60
[241535.991252]  rtnl_fill_ifinfo+0x57b/0xcb0
[241535.992192]  rtnl_dump_ifinfo+0x58f/0x6d0
[241535.993123]  ? ksize+0x14/0x20
[241535.994033]  ? __alloc_skb+0xe8/0x250
[241535.994935]  netlink_dump+0x17c/0x300
[241535.995821]  netlink_recvmsg+0x1de/0x2c0
[241535.996677]  sock_recvmsg+0x70/0x80
[241535.997518]  ____sys_recvmsg+0x9b/0x1b0
[241535.998360]  ? iovec_from_user+0x82/0x120
[241535.999202]  ? __import_iovec+0x2c/0x130
[241536.000031]  ___sys_recvmsg+0x94/0x130
[241536.000850]  ? __handle_mm_fault+0x56d/0x6e0
[241536.001668]  __sys_recvmsg+0x5f/0xb0
[241536.002464]  ? syscall_enter_from_user_mode+0x2b/0x80
[241536.003242]  __x64_sys_recvmsg+0x1f/0x30
[241536.004008]  do_syscall_64+0x38/0x50
[241536.004767]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[241536.005532] RIP: 0033:0x7fd375014f47

Fixes: 2ff349c5 ("net/mlx5e: Verify dev is present in some ndos")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SW steering uses RC QP to write/read to/from ICM, hence it's not
supported when RoCE is not supported as well.

Fixes: 70605ea5 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Check if RoCE is supported by the device before enable it in
the vport context and create all the RDMA steering objects.

Fixes: 80f09dfc ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When adding a hairpin flow, a firmware-side send queue is created for
the peer net device, which claims some host memory pages for its
internal ring buffer. If the peer net device is removed/unbound before
the hairpin flow is deleted, then the send queue is not destroyed which
leads to a stack trace on pci device remove:

[ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource
[ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110
[ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0
[ 748.002171] ------------[ cut here ]------------
[ 748.001177] FW pages counter is 4 after reclaiming all pages
[ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]                      [  +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core]
[ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1
[ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]
[ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9
[ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286
[ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000
[ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51
[ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8
[ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30
[ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000
[ 748.001429] FS:  00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000
[ 748.001695] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0
[ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 748.001654] Call Trace:
[ 748.000576]  ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core]
[ 748.001416]  ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core]
[ 748.001354]  ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core]
[ 748.001203]  mlx5_function_teardown+0x30/0x60 [mlx5_core]
[ 748.001275]  mlx5_uninit_one+0xa7/0xc0 [mlx5_core]
[ 748.001200]  remove_one+0x5f/0xc0 [mlx5_core]
[ 748.001075]  pci_device_remove+0x9f/0x1d0
[ 748.000833]  device_release_driver_internal+0x1e0/0x490
[ 748.001207]  unbind_store+0x19f/0x200
[ 748.000942]  ? sysfs_file_ops+0x170/0x170
[ 748.001000]  kernfs_fop_write_iter+0x2bc/0x450
[ 748.000970]  new_sync_write+0x373/0x610
[ 748.001124]  ? new_sync_read+0x600/0x600
[ 748.001057]  ? lock_acquire+0x4d6/0x700
[ 748.000908]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 748.001126]  ? fd_install+0x1c9/0x4d0
[ 748.000951]  vfs_write+0x4d0/0x800
[ 748.000804]  ksys_write+0xf9/0x1d0
[ 748.000868]  ? __x64_sys_read+0xb0/0xb0
[ 748.000811]  ? filp_open+0x50/0x50
[ 748.000919]  ? syscall_enter_from_user_mode+0x1d/0x50
[ 748.001223]  do_syscall_64+0x3f/0x80
[ 748.000892]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 748.001026] RIP: 0033:0x7f58bcfb22f7
[ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7
[ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003
[ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001
[ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d
[ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700
[ 748.001564] irq event stamp: 0
[ 748.000787] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0
[ 748.001854] softirqs last  enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0
[ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 748.001492] ---[ end trace a6fabd773d1c51ae ]---

Fix by destroying the send queue of a hairpin peer net device that is
being removed/unbound, which returns the allocated ring buffer pages to
the host.

Fixes: 4d8fcf21 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, IPsec feature is disabled because mlx5e_build_nic_netdev
is required to be called after mlx5e_ipsec_init. This requirement is
invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize
independent resources.

Remove ipsec pointer check in mlx5e_build_nic_netdev so that the
two functions can be called at any order.

Fixes: 547eede0 ("net/mlx5e: IPSec, Innova IPSec offload infrastructure")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock
removal from TC filter update path and properly handle concurrent encap
entry insertion/deletion which can lead to following use-after-free:

 [23827.464923] ==================================================================
 [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635
 [23827.472251]
 [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5
 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
 [23827.476731] Call Trace:
 [23827.477260]  dump_stack+0xbb/0x107
 [23827.477906]  print_address_description.constprop.0+0x18/0x140
 [23827.478896]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.479879]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.480905]  kasan_report.cold+0x7c/0xd8
 [23827.481701]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.482744]  kasan_check_range+0x145/0x1a0
 [23827.493112]  mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.494054]  ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core]
 [23827.495296]  mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core]
 [23827.496338]  ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core]
 [23827.497486]  ? read_word_at_a_time+0xe/0x20
 [23827.498250]  ? strscpy+0xa0/0x2a0
 [23827.498889]  process_one_work+0x8ac/0x14e0
 [23827.499638]  ? lockdep_hardirqs_on_prepare+0x400/0x400
 [23827.500537]  ? pwq_dec_nr_in_flight+0x2c0/0x2c0
 [23827.501359]  ? rwlock_bug.part.0+0x90/0x90
 [23827.502116]  worker_thread+0x53b/0x1220
 [23827.502831]  ? process_one_work+0x14e0/0x14e0
 [23827.503627]  kthread+0x328/0x3f0
 [23827.504254]  ? _raw_spin_unlock_irq+0x24/0x40
 [23827.505065]  ? __kthread_bind_mask+0x90/0x90
 [23827.505912]  ret_from_fork+0x1f/0x30
 [23827.506621]
 [23827.506987] Allocated by task 28248:
 [23827.507694]  kasan_save_stack+0x1b/0x40
 [23827.508476]  __kasan_kmalloc+0x7c/0x90
 [23827.509197]  mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core]
 [23827.510194]  mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core]
 [23827.511218]  __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core]
 [23827.512234]  mlx5e_configure_flower+0x191c/0x4870 [mlx5_core]
 [23827.513298]  tc_setup_cb_add+0x1d5/0x420
 [23827.514023]  fl_hw_replace_filter+0x382/0x6a0 [cls_flower]
 [23827.514975]  fl_change+0x2ceb/0x4a51 [cls_flower]
 [23827.515821]  tc_new_tfilter+0x89a/0x2070
 [23827.516548]  rtnetlink_rcv_msg+0x644/0x8c0
 [23827.517300]  netlink_rcv_skb+0x11d/0x340
 [23827.518021]  netlink_unicast+0x42b/0x700
 [23827.518742]  netlink_sendmsg+0x743/0xc20
 [23827.519467]  sock_sendmsg+0xb2/0xe0
 [23827.520131]  ____sys_sendmsg+0x590/0x770
 [23827.520851]  ___sys_sendmsg+0xd8/0x160
 [23827.521552]  __sys_sendmsg+0xb7/0x140
 [23827.522238]  do_syscall_64+0x3a/0x70
 [23827.522907]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [23827.523797]
 [23827.524163] Freed by task 25948:
 [23827.524780]  kasan_save_stack+0x1b/0x40
 [23827.525488]  kasan_set_track+0x1c/0x30
 [23827.526187]  kasan_set_free_info+0x20/0x30
 [23827.526968]  __kasan_slab_free+0xed/0x130
 [23827.527709]  slab_free_freelist_hook+0xcf/0x1d0
 [23827.528528]  kmem_cache_free_bulk+0x33a/0x6e0
 [23827.529317]  kfree_rcu_work+0x55f/0xb70
 [23827.530024]  process_one_work+0x8ac/0x14e0
 [23827.530770]  worker_thread+0x53b/0x1220
 [23827.531480]  kthread+0x328/0x3f0
 [23827.532114]  ret_from_fork+0x1f/0x30
 [23827.532785]
 [23827.533147] Last potentially related work creation:
 [23827.534007]  kasan_save_stack+0x1b/0x40
 [23827.534710]  kasan_record_aux_stack+0xab/0xc0
 [23827.535492]  kvfree_call_rcu+0x31/0x7b0
 [23827.536206]  mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core]
 [23827.537305]  mlx5e_flow_put+0x49/0x80 [mlx5_core]
 [23827.538290]  mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core]
 [23827.539300]  tc_setup_cb_destroy+0x18e/0x2f0
 [23827.540144]  fl_hw_destroy_filter+0x1d2/0x310 [cls_flower]
 [23827.541148]  __fl_delete+0x4dc/0x660 [cls_flower]
 [23827.541985]  fl_delete+0x97/0x160 [cls_flower]
 [23827.542782]  tc_del_tfilter+0x7ab/0x13d0
 [23827.543503]  rtnetlink_rcv_msg+0x644/0x8c0
 [23827.544257]  netlink_rcv_skb+0x11d/0x340
 [23827.544981]  netlink_unicast+0x42b/0x700
 [23827.545700]  netlink_sendmsg+0x743/0xc20
 [23827.546424]  sock_sendmsg+0xb2/0xe0
 [23827.547084]  ____sys_sendmsg+0x590/0x770
 [23827.547850]  ___sys_sendmsg+0xd8/0x160
 [23827.548606]  __sys_sendmsg+0xb7/0x140
 [23827.549303]  do_syscall_64+0x3a/0x70
 [23827.549969]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [23827.550853]
 [23827.551217] The buggy address belongs to the object at ffff8881d1322200
 [23827.551217]  which belongs to the cache kmalloc-256 of size 256
 [23827.553341] The buggy address is located 140 bytes inside of
 [23827.553341]  256-byte region [ffff8881d1322200, ffff8881d1322300)
 [23827.555747] The buggy address belongs to the page:
 [23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320
 [23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0
 [23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
 [23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40
 [23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
 [23827.564112] page dumped because: kasan: bad access detected
 [23827.565439]
 [23827.565932] Memory state around the buggy address:
 [23827.566917]  ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.568485]  ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 [23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 [23827.571143]                       ^
 [23827.571879]  ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.573283]  ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.574654] ==================================================================

Most of the necessary logic is already correctly implemented by
mlx5e_get_next_valid_encap() helper that is used in neigh stats update
handler. Make the handler generic by renaming it to
mlx5e_get_next_matching_encap() and use callback to test whether flow is
matching instead of hardcoded check for 'valid' flag value. Implement
mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap()
with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new
mlx5e_get_next_init_encap() helper by calling
mlx5e_get_next_matching_encap() with callback that tests encap completion
result to be non-error and use it in mlx5e_rep_neigh_update() to safely
iterate over nhe->encap_list.

Remove encap completion logic from mlx5e_rep_update_flows() since the encap
entries passed to this function are already guaranteed to be properly
initialized by similar code in mlx5e_get_next_init_encap().

Fixes: 2a1f1768 ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0.
So, we use -ENOMEM to indicate that the function
create_singlethread_workqueue() return NULL.

Clean up smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373
mlx5e_arfs_create_tables() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: f6755b80 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-06-09

This series contains updates to ice driver only.

Maciej informs the user when XDP is not supported due to the driver
being in the 'safe mode' state. He also adds a parameter to Tx queue
configuration to resolve an issue in configuring XDP queues as it cannot
rely on using the number Tx or Rx queues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This this the counterpart of 8aa7b526 ("openvswitch: handle DNAT
tuple collision") for act_ct. From that commit changelog:

"""
With multiple DNAT rules it's possible that after destination
translation the resulting tuples collide.

...

Netfilter handles this case by allocating a null binding for SNAT at
egress by default.  Perform the same operation in openvswitch for DNAT
if no explicit SNAT is requested by the user and allocate a null binding
for SNAT for packets in the "original" direction.
"""

Fixes: 95219afb ("act_ct: support asymmetric conntrack")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:

 # ip link add name br1 type bridge vlan_filtering 1
 # bridge vlan add dev br1 vid 555 self pvid untagged
 RTNETLINK answers: Invalid argument

As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa ("bridge: dont send
notification when skb->len == 0 in rtnl_bridge_notify").

Fix by removing the error and add a comment to avoid future bugs.

Fixes: a8db57c1 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes berg says:

====================
A fair number of fixes:
 * fix more fallout from RTNL locking changes
 * fixes for some of the bugs found by syzbot
 * drop multicast fragments in mac80211 to align
   with the spec and what drivers are doing now
 * fix NULL-ptr deref in radiotap injection
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.

We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.
Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>
Fixes: 5d77dca8 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both functions are known to be racy when reading inet_num
as we do not want to grab locks for the common case the socket
has been bound already. The race is resolved in inet_autobind()
by reading again inet_num under the socket lock.

syzbot reported:
BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port

write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0:
 udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308
 udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89
 inet_autobind net/ipv4/af_inet.c:183 [inline]
 inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807
 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1:
 inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806
 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x9db4

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several ethtool functions leave heap uncleared (potentially) by
drivers. This will leave the unused portion of heap unchanged and
might copy the full contents back to userspace.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ae15e0ba ("ice: Change number of XDP Tx queues to match
number of Rx queues") tried to address the incorrect setting of XDP
queue count that was based on the Tx queue count, whereas in theory we
should provide the XDP queue per Rx queue. However, the routines that
setup and destroy the set of Tx resources are still based on the
vsi->num_txq.

Ice supports the asynchronous Tx/Rx queue count, so for a setup where
vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs
will be accessing the vsi->xdp_rings out of the bounds.

Parameterize two mentioned functions so they get the size of Tx resources
array as the input.

Fixes: ae15e0ba ("ice: Change number of XDP Tx queues to match number of Rx queues")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice driver requires a programmable pipeline firmware package in order to
have a support for advanced features. Otherwise, driver falls back to so
called 'safe mode'. For that mode, ndo_bpf callback is not exposed and
when user tries to load XDP program, the following happens:

$ sudo ./xdp1 enp179s0f1
libbpf: Kernel error message: Underlying driver does not support XDP in native mode
link set xdp fd failed

which is sort of confusing, as there is a native XDP support, but not in
the current mode. Improve the user experience by providing the specific
ndo_bpf callback dedicated for safe mode which will make use of extack
to explicitly let the user know that the DDP package is missing and
that's the reason that the XDP can't be loaded onto interface currently.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: efc2214b ("ice: Add support for XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

These are not permitted by the spec, just drop them.

Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When reconfiguration fails, we shut down everything, but we
cannot call cfg80211_shutdown_all_interfaces() with the wiphy
mutex held. Since cfg80211 now calls it on resume errors, we
only need to do likewise for where we call reconfig (whether
directly or indirectly), but not under the wiphy lock.

Cc: stable@vger.kernel.org
Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If resume fails, we should shut down all interfaces as the
hardware is probably dead. This was/is already done now in
mac80211, but we need to change that due to locking issues,
so move it here and do it without the wiphy lock held.

Cc: stable@vger.kernel.org
Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.d564ca69de7c.I2e3c3e5d410b72a4f63bade4fb075df041b3d92f@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When I moved around the code here, I neglected that we could still
call register_netdev() or similar without the wiphy mutex held,
which then calls cfg80211_register_wdev() - that's also done from
cfg80211_register_netdevice(), but the phy80211 symlink creation
was only there. Now, the symlink isn't needed for a *pure* wdev,
but a netdev not registered via cfg80211_register_wdev() should
still have the symlink, so move the creation to the right place.

Cc: stable@vger.kernel.org
Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.a5dc4c1e488c.Ia42fe663cefe47b0883af78c98f284c5555bbe5d@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211 now calls suspend/resume with the wiphy lock
held, and while there's a problem with that needing
to be fixed, we should do the same in debugfs.

Cc: stable@vger.kernel.org
Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210608113226.14020430e449.I78e19db0a55a8295a376e15ac4cf77dbb4c6fb51@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.

Tested on Lantiq xRX200 (BT Home Hub 5A).

Fixes: 9423361d ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.

The following bugs are fixed in the code:
    1. Add support for non-LLQ machines:
       The ena_xdp_tx_map_frame() function assumed that LLQ is
       supported, and never mapped the whole packet using DMA. On some
       instances, which don't support LLQ, this causes loss of traffic.

    2. Wrong DMA buffer length passed to device:
       When using LLQ, the first 'tx_max_header_size' bytes of the
       packet would be copied to push header. The rest of the packet
       would be copied to a DMA'd buffer.

    3. Freeing the XDP buffer twice in case of a mapping error:
       In case a buffer DMA mapping fails, the function uses
       xdp_return_frame_rx_napi() to free the RX buffer and returns from
       the function with an error. XDP frames that fail to xmit get
       freed by the kernel and so there is no need for this call.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.

Fixes: eb4733d7 ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported memory leak in rds. The problem
was in unputted refcount in case of error.

int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
		int msg_flags)
{
...

	if (!rds_next_incoming(rs, &inc)) {
		...
	}

After this "if" inc refcount incremented and

	if (rds_cmsg_recv(inc, msg, rs)) {
		ret = -EFAULT;
		goto out;
	}
...
out:
	return ret;
}

in case of rds_cmsg_recv() fail the refcount won't be
decremented. And it's easy to see from ftrace log, that
rds_inc_addref() don't have rds_inc_put() pair in
rds_recvmsg() after rds_cmsg_recv()

 1)               |  rds_recvmsg() {
 1)   3.721 us    |    rds_inc_addref();
 1)   3.853 us    |    rds_message_inc_copy_to_user();
 1) + 10.395 us   |    rds_cmsg_recv();
 1) + 34.260 us   |  }

Fixes: bdbe6fbc ("RDS: recv.c")
Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - Avoid WARN_ON timing related checks, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

My initial goal was to fix the default MTU, which is set to 65536, ie above
the maximum defined in the driver: 65535 (ETH_MAX_MTU).

In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to
IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default.

Let's also, for consistency, set the mtu in vrf_setup(). This function
calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config
is done in the same function.

Before the patch:
$ ip link add blue type vrf table 1234
$ ip link list blue
9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff
$ ip link set dev blue mtu 65535
$ ip link set dev blue mtu 65536
Error: mtu greater than device maximum.

Fixes: 5055376a ("net: vrf: Fix ping failed when vrf mtu is set to 0")
CC: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The preposition "for" should be changed to preposition "of".
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When 'nla_parse_nested_deprecated' failed, it's no need to
BUG() here, return -EINVAL is ok.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported by syzkaller:
BUG: memory leak
unreferenced object 0xffff888105df7000 (size 64):
comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline]
[<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416
[<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739
[<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
[<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800
[<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
[<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae

The memory of doi_def->map.std pointing is allocated in
netlbl_cipsov4_add_std, but no place has freed it. It should be
freed in cipso_v4_doi_free which frees the cipso DOI resource.

Fixes: 96cb8e33 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>