- 17 Sep, 2016 14 commits
-
-
Alexei Starovoitov authored
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to operate in 'collect metadata' mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. ovs can use it as well in the future (once appropriate ovs-vport abstractions and user apis are added). Note that just like in other tunnels we cannot cache the dst, since tunnel_info metadata can be different for every packet. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by:
-
Julia Lawall authored
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by:
-
Alan Cox authored
(As asked by Dave in Februrary) Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
David Ahern authored
No longer used after e0d56fdd ("net: l3mdev: remove redundant calls") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
No longer used after d66f6c0a ("net: ipv4: Remove l3mdev_get_saddr") Signed-off-by:
-
Eric Dumazet authored
With large BDP TCP flows and lossy networks, it is very important to keep a low number of skbs in the write queue. RACK and SACK processing can perform a linear scan of it. We should avoid putting any payload in skb->head, so that SACK shifting can be done if needed. With this patch, we allow to pack ~0.5 MB per skb instead of the 64KB initially cooked at tcp_sendmsg() time. This gives a reduction of number of skbs in write queue by eight. tcp_rack_detect_loss() likes this. We still allow payload in skb->head for first skb put in the queue, to not impact RPC workloads. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.9 Major changes: iwlwifi * preparation for new a000 HW continues * some DQA improvements * add support for GMAC * add support for 9460, 9270 and 9170 series mwifiex * support random MAC address for scanning * add HT aggregation support for adhoc mode * add custom regulatory domain support * add manufacturing mode support via nl80211 testmode interface bcma * support BCM53573 series of wireless SoCs bitfield.h * add FIELD_PREP() and FIELD_GET() macros mt7601u * convert to use the new bitfield.h macros brcmfmac * add support for bcm4339 chip with modalias sdio:c00v02D0d4339 ath10k * add nl80211 testmode support for 10.4 firmware * hide kernel addresses from logs using %pK format specifier * implement NAPI support * enable peer stats by default ath9k * use ieee80211_tx_status_noskb where possible wil6210 * extract firmware capabilities from the firmware file ath6kl * enable firmware crash dumps on the AR6004 ath-current is also merged to fix a conflict in ath10k. ==================== Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5e Order-0 pages for Striding RQ In this series, we refactor our Striding RQ receive-flow to always use fragmented WQEs (Work Queue Elements) using order-0 pages, omitting the flow that allocates and splits high-order pages which would fragment and deplete high-order pages in the system. The first patch gives a slight degradation, but opens the opportunity to using a simple page-cache mechanism of a fair size. The page-cache, implemented in patch 3, not only closes the performance gap but even gives a gain. In patch 2 we re-organize the code to better manage the calls for alloc/de-alloc pages in the RX flow. Series generated against net-next commit: bed806cb "Merge branch 'mlxsw-ethtool'" ==================== Signed-off-by:
-
Tariq Toukan authored
Instead of reallocating and mapping pages for RX data-path, recycle already used pages in a per ring cache. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - order0 no cache * 4,786,899 - order0 with cache 1% gain Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - order0 no cache * 4,127,852 - order0 with cache 3.7% gain Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - order0 no cache * 3,931,708 - order0 with cache 5.4% gain Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by:
-
Tariq Toukan authored
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by:
-
David Howells authored
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 16 Sep, 2016 26 commits
-
-
David S. Miller authored
John Crispin says: ==================== net-next: dsa: add QCA8K support This series is based on the AR8xxx series posted by Matthieu Olivari in may 2015. The following changes were made since then * fixed the nitpicks from the previous review * updated to latest API * turned it into an mdio device * added callbacks for fdb, bridge offloading, stp, eee, port status * fixed several minor issues to the port setup and arp learning * changed the namespacing as this driver to qca8k The driver has so far only been tested on qca8337/N. It should work on other QCA switches such as the qca8327 with minor changes. ==================== Signed-off-by: -
John Crispin authored
This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Crispin authored
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
John Crispin authored
Add device-tree binding for ar8xxx switch families. Cc: devicetree@vger.kernel.org Signed-off-by:
-
Wei Yongjun authored
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/dsa/bcm_sf2.c:963:19: warning: symbol 'bcm_sf2_io_ops' was not declared. Should it be static? Signed-off-by:
-
Eric Dumazet authored
When skb replaces another one in ooo queue, I forgot to also update tp->ooo_last_skb as well, if the replaced skb was the last one in the queue. To fix this, we simply can re-use the code that runs after an insertion, trying to merge skbs at the right of current skb. This not only fixes the bug, but also remove all small skbs that might be a subset of the new one. Example: We receive segments 2001:3001, 4001:5001 Then we receive 2001:8001 : We should replace 2001:3001 with the big skb, but also remove 4001:50001 from the queue to save space. packetdrill test demonstrating the bug 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> +0.100 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +0.01 < . 1001:2001(1000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001> +0.01 < . 1001:3001(2000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001> Fixes: 9f5afeae ("tcp: use an RB tree for ooo receive queue") Signed-off-by:
-
David S. Miller authored
Sean Wang says: ==================== mediatek: add enhancement into the existing reset flow Current driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch 1) tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running. 2) refactors code in order to the reusability of existing code. 3) considers handling for race condition between the reset flow and callbacks registered into core driver called about hardware accessing. 4) introduces power domain usage to hardware setup which leads to have cleanly and completely restore to the state as the initial. Changes since v1: - fix the build error with module built causing undefined symbol for pinctrl_bind_pins, so using pinctrl_select_state instead accomplishes the pin mux setup during the reset process. ==================== Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Sean Wang authored
add the protection of the race condition between the reset process and hardware access happening on the related callbacks. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
struct mtk_eth has already contained struct regmap ethsys pointer to the address range of the internal circuit reset, so we reuse it to reset more internal blocks on ethernet hardware such as packet processing engine (PPE) and frame engine (FE) instead of rstc which deals with FE only. Signed-off-by:
-
Sean Wang authored
1) original driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running, including power, pin mux control, clock and internal circuits on the ethernet in order to restore into the initial state which the rebooted machine gives. 2) add state variable inside structure mtk_eth to help distinguish mtk_hw_init is called between the initialization during boot time or re-initialization during the reset process. 3) add ge_mode variable inside structure mtk_mac for restoring the interface mode of the current setup for the target MAC. 4) remove __init attribute from mtk_hw_init definition Signed-off-by:
-
Sean Wang authored
introduce power domain control which the digital circuit of the ethernet belongs to inside the flow of hardware initialization and deinitialization which helps the entire ethernet hardware block could restart cleanly and completely as being back to the initial state when the whole machine reboot. Signed-off-by:
-
Sean Wang authored
This cleans up the error path inside mtk_hw_init call, causing it able to exit appropriately when something fails and also includes refactoring mtk_cleanup call to make the partial logic reusable on the error path. Signed-off-by:
-
Sean Wang authored
grouping things related to the deinitialization of what mtk_hw_init call does that help to be reused by the reset process and the error path handling. Signed-off-by:
-
Sean Wang authored
the existing mtk_hw_init includes hardware and software initialization inside so that it is slightly hard to reuse them for the process of the reset recovery, so some splitting is made here for keeping hardware initializing relevant thing and the else such as IRQ registration and MDIO initialization what are all about to the interface of core driver moved to the other proper place because they have no needs to register IRQ and re-initialize structure again during the reset process. Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160913-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Support IPv6 Here is a set of patches that add IPv6 support. They need to be applied on top of the just-posted miscellaneous fix patches. They are: (1) Make autobinding of an unconnected socket work when sendmsg() is called to initiate a client call. (2) Don't specify the protocol when creating the client socket, but rather take the default instead. (3) Use rxrpc_extract_addr_from_skb() in a couple of places that were doing the same thing manually. This allows the IPv6 address extraction to be done in fewer places. (4) Add IPv6 support. With this, calls can be made to IPv6 servers from userspace AF_RXRPC programs; AFS, however, can't use IPv6 yet as the RPC calls need to be upgradeable. ==================== Reviewed-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160913-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Miscellaneous fixes Here's a set of miscellaneous fix patches. There are a couple of points of note: (1) There is one non-fix patch that adjusts the call ref tracking tracepoint to make kernel API-held refs on calls more obvious. This is a prerequisite for the patch that fixes prealloc refcounting. (2) The final patch alters how jumbo packets that partially exceed the receive window are handled. Previously, space was being left in the Rx buffer for them, but this significantly hurts performance as the Rx window can't be increased to match the OpenAFS Tx window size. Instead, the excess subpackets are discarded and an EXCEEDS_WINDOW ACK is generated for the first. To avoid the problem of someone trying to run the kernel out of space by feeding the kernel a series of overlapping maximal jumbo packets, we stop allowing jumbo packets on a call if we encounter more than three jumbo packets with duplicate or excessive subpackets. ==================== Reviewed-by:
-
David S. Miller authored
Varun Prakash says: ==================== iw_cxgb4,cxgbit: remove duplicate code This patch series removes duplicate code from iw_cxgb4 and cxgbit by adding common function definitions in libcxgb. Please review. ==================== Reviewed-by:
-
Varun Prakash authored
Add cxgb_mk_rx_data_ack() to remove duplicate code to form CPL_RX_DATA_ACK hardware command. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Varun Prakash authored
Add cxgb_mk_abort_rpl() to remove duplicate code to form CPL_ABORT_RPL hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_mk_abort_req() to remove duplicate code to form CPL_ABORT_REQ hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_mk_close_con_req() to remove duplicate code to form CPL_CLOSE_CON_REQ hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_mk_tid_release() to remove duplicate code to form CPL_TID_RELEASE hardware command. Signed-off-by:
-
Varun Prakash authored
Add cxgb_compute_wscale() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by:
-
