Fixes the following W=1 kernel build warning(s):

 drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'tfm' not described in 'cbc_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'in_key' not described in 'cbc_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'key_len' not described in 'cbc_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-cbc.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for cbc_aes_nx_set_key() instead
 drivers/crypto/nx/nx_debugfs.c:34: warning: Function parameter or member 'drv' not described in 'nx_debugfs_init'
 drivers/crypto/nx/nx_debugfs.c:34: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_debugfs_init() instead
 drivers/crypto/nx/nx.c:31: warning: Incorrect use of kernel-doc format:  * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure
 drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'nx_ctx' not described in 'nx_hcall_sync'
 drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'op' not described in 'nx_hcall_sync'
 drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'may_sleep' not described in 'nx_hcall_sync'
 drivers/crypto/nx/nx.c:43: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_hcall_sync() instead
 drivers/crypto/nx/nx.c:209: warning: Function parameter or member 'nbytes' not described in 'trim_sg_list'

Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <yoder1@us.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/vmx/vmx.c:23: warning: expecting prototype for Routines supporting VMX instructions on the Power 8(). Prototype was for p8_init() instead

Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Henrique Cerri <mhcerri@br.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/caam/caampkc.c:199: warning: expecting prototype for from a given scatterlist(). Prototype was for caam_rsa_count_leading_zeros() instead
 drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'xts_key_fallback' not described in 'caam_ctx'
 drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'fallback' not described in 'caam_ctx'

Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/atmel-ecc.c:41: warning: cannot understand function prototype: 'struct atmel_ecdh_ctx '

Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/keembay/ocs-hcu.c:107: warning: expecting prototype for struct ocs_hcu_dma_list. Prototype was for struct ocs_hcu_dma_entry instead
 drivers/crypto/keembay/ocs-hcu.c:127: warning: expecting prototype for struct ocs_dma_list. Prototype was for struct ocs_hcu_dma_list instead
 drivers/crypto/keembay/ocs-hcu.c:610: warning: expecting prototype for ocs_hcu_digest(). Prototype was for ocs_hcu_hash_update() instead
 drivers/crypto/keembay/ocs-hcu.c:648: warning: expecting prototype for ocs_hcu_hash_final(). Prototype was for ocs_hcu_hash_finup() instead

Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ones remove here not only fail to conform to kernel-doc, but also
provide no value, so let's remove them completely in this case.

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/ux500/hash/hash_core.c:368: warning: Function parameter or member 'ctx' not described in 'hash_get_device_data'
 drivers/crypto/ux500/hash/hash_core.c:368: warning: Excess function parameter 'hash_ctx' description in 'hash_get_device_data'
 drivers/crypto/ux500/hash/hash_core.c:551: warning: expecting prototype for hash_init(). Prototype was for ux500_hash_init() instead
 drivers/crypto/ux500/hash/hash_core.c:592: warning: Function parameter or member 'length' not described in 'hash_processblock'
 drivers/crypto/ux500/hash/hash_core.c:1302: warning: expecting prototype for hash_update(). Prototype was for ahash_update() instead
 drivers/crypto/ux500/hash/hash_core.c:1322: warning: expecting prototype for hash_final(). Prototype was for ahash_final() instead
 drivers/crypto/ux500/hash/hash_core.c:1622: warning: Function parameter or member 'device_data' not described in 'ahash_algs_register_all'
 drivers/crypto/ux500/hash/hash_core.c:1622: warning: expecting prototype for hash_algs_register_all(). Prototype was for ahash_algs_register_all() instead
 drivers/crypto/ux500/hash/hash_core.c:1647: warning: Function parameter or member 'device_data' not described in 'ahash_algs_unregister_all'
 drivers/crypto/ux500/hash/hash_core.c:1647: warning: expecting prototype for hash_algs_unregister_all(). Prototype was for ahash_algs_unregister_all() instead
 drivers/crypto/ux500/cryp/cryp.c:19: warning: Incorrect use of kernel-doc format:  * cryp_wait_until_done - wait until the device logic is not busy
 drivers/crypto/ux500/cryp/cryp.c:22: warning: Function parameter or member 'device_data' not described in 'cryp_wait_until_done'
 drivers/crypto/ux500/cryp/cryp.c:22: warning: expecting prototype for ST(). Prototype was for cryp_wait_until_done() instead
 drivers/crypto/ux500/cryp/cryp.c:292: warning: Function parameter or member 'cryp_mode' not described in 'cryp_save_device_context'
 drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'device_data' not described in 'cryp_enable_irq_src'
 drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'irq_src' not described in 'cryp_enable_irq_src'
 drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: expecting prototype for ST(). Prototype was for cryp_enable_irq_src() instead
 drivers/crypto/ux500/cryp/cryp_core.c:42: warning: expecting prototype for ST(). Prototype was for CRYP_MAX_KEY_SIZE() instead
 drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'key' not described in 'cryp_ctx'
 drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'session_id' not described in 'cryp_ctx'

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Shujuan Chen <shujuan.chen@stericsson.com>
Cc: Joakim Bech <joakim.xx.bech@stericsson.com>
Cc: Berne Hebark <berne.herbark@stericsson.com>
Cc: Niklas Hernaeus <niklas.hernaeus@stericsson.com>
Cc: Jonas Linde <jonas.linde@stericsson.com>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/chelsio/chcr_core.c:2: warning: wrong kernel-doc identifier on line:
 drivers/crypto/chelsio/chcr_algo.c:806: warning: Function parameter or member 'wrparam' not described in 'create_cipher_wr'
 drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'req' description in 'create_cipher_wr'
 drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'ctx' description in 'create_cipher_wr'
 drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'qid' description in 'create_cipher_wr'
 drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'op_type' description in 'create_cipher_wr'
 drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'req' not described in 'create_hash_wr'
 drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'param' not described in 'create_hash_wr'

Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Manoj Malviya <manojmalviya@chelsio.com>
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Jitendra Lulla <jlulla@chelsio.com>
Cc: M R Gowda <yeshaswi@chelsio.com>
Cc: Harsh Jain <harsh@chelsio.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'from_nents' not described in 'spu_msg_sg_add'
 drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'length' not described in 'spu_msg_sg_add'
 drivers/crypto/bcm/spu.c:464: warning: Excess function parameter 'Return' description in 'spum_gcm_ccm_pad_len'
 drivers/crypto/bcm/spu.c:524: warning: Function parameter or member 'iv_len' not described in 'spum_aead_ivlen'
 drivers/crypto/bcm/spu.c:524: warning: expecting prototype for spu_aead_ivlen(). Prototype was for spum_aead_ivlen() instead
 drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg_digest_size' not described in 'spum_digest_size'
 drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg' not described in 'spum_digest_size'
 drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'htype' not described in 'spum_digest_size'
 drivers/crypto/bcm/spu.c:583: warning: bad line:
 drivers/crypto/bcm/spu.c:927: warning: Function parameter or member 'is_inbound' not described in 'spum_cipher_req_finish'
 drivers/crypto/bcm/spu.c:927: warning: Excess function parameter 'isInbound' description in 'spum_cipher_req_finish'
 drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'fmd' not described in 'spu2_fmd_init'
 drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'spu2_type' not described in 'spu2_fmd_init'
 drivers/crypto/bcm/spu2.c:557: warning: Excess function parameter 'spu2_cipher_type' description in 'spu2_fmd_init'
 drivers/crypto/bcm/spu2.c:615: warning: Function parameter or member 'auth_first' not described in 'spu2_fmd_ctrl0_write'
 drivers/crypto/bcm/spu2.c:615: warning: Excess function parameter 'authFirst' description in 'spu2_fmd_ctrl0_write'
 drivers/crypto/bcm/spu2.c:666: warning: Function parameter or member 'is_inbound' not described in 'spu2_fmd_ctrl1_write'
 drivers/crypto/bcm/spu2.c:803: warning: expecting prototype for spu_payload_length(). Prototype was for spu2_payload_length() instead
 drivers/crypto/bcm/spu2.c:825: warning: Function parameter or member 'is_hash' not described in 'spu2_response_hdr_len'
 drivers/crypto/bcm/spu2.c:825: warning: expecting prototype for spu_response_hdr_len(). Prototype was for spu2_response_hdr_len() instead
 drivers/crypto/bcm/spu2.c:843: warning: expecting prototype for spu_hash_pad_len(). Prototype was for spu2_hash_pad_len() instead
 drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'cipher_mode' not described in 'spu2_gcm_ccm_pad_len'
 drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'data_size' not described in 'spu2_gcm_ccm_pad_len'
 drivers/crypto/bcm/spu2.c:855: warning: expecting prototype for spu2_gcm_ccm_padlen(). Prototype was for spu2_gcm_ccm_pad_len() instead
 drivers/crypto/bcm/spu2.c:872: warning: expecting prototype for spu_assoc_resp_len(). Prototype was for spu2_assoc_resp_len() instead
 drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg_digest_size' not described in 'spu2_digest_size'
 drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg' not described in 'spu2_digest_size'
 drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'htype' not described in 'spu2_digest_size'
 drivers/crypto/bcm/spu2.c:945: warning: expecting prototype for spu_create_request(). Prototype was for spu2_create_request() instead
 drivers/crypto/bcm/spu2.c:1122: warning: expecting prototype for spu_cipher_req_init(). Prototype was for spu2_cipher_req_init() instead
 drivers/crypto/bcm/spu2.c:1182: warning: Function parameter or member 'is_inbound' not described in 'spu2_cipher_req_finish'
 drivers/crypto/bcm/spu2.c:1182: warning: expecting prototype for spu_cipher_req_finish(). Prototype was for spu2_cipher_req_finish() instead
 drivers/crypto/bcm/spu2.c:1243: warning: expecting prototype for spu_request_pad(). Prototype was for spu2_request_pad() instead
 drivers/crypto/bcm/spu2.c:1321: warning: expecting prototype for spu_status_process(). Prototype was for spu2_status_process() instead
 drivers/crypto/bcm/cipher.c:1048: warning: Function parameter or member 'req' not described in 'spu_aead_rx_sg_create'
 drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'cipher' not described in 'rfc4543_gcm_esp_setkey'
 drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'key' not described in 'rfc4543_gcm_esp_setkey'
 drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'keylen' not described in 'rfc4543_gcm_esp_setkey'

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Rice <rob.rice@broadcom.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/hisilicon/sec/sec_drv.c:843: warning: Function parameter or member 'queue' not described in 'sec_queue_empty'

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Zaibo Xu <xuzaibo@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

s/procesing/processing/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes the following checkpatch.pl warnings:

crypto/jitterentropy.c:600: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:681: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:772: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:829: WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the following coccicheck warning:

drivers/char/hw_random/core.c:399:8-16: WARNING: use scnprintf or sprintf.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.

One thread shall write a command to a TEE ring buffer entry only if:

 - Trusted OS has notified that the TEE command for the given entry
   has been processed and driver has copied the TEE response into
   client buffer.

 - The command entry is empty and can be written into.

After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.

If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.

Fixes: 33960acc (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The PSP TEE device driver polls the command status variable every
5ms to check for command completion. Reduce this time to 1ms so that
there is an improvement in driver response time to clients which submit
TEE commands.
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This commit fixes the checkpatch warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
34: FILE: drivers/char/hw_random/intel-rng.c:34:
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This pulls in the NIST P384/256/192 x509 changes.

Prepare the x509 parser to accept NIST P384 certificates and add the
OID for ansip384r1, which is the identifier for NIST P384.

Summary of changes:

* crypto/asymmetric_keys/x509_cert_parser.c
  - prepare x509 parser to load NIST P384

* include/linux/oid_registry.h
  - add OID_ansip384r1
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for IMA signature verification for EC keys. Since SHA type
of hashes can be used by RSA and ECDSA signature schemes we need to
look at the key and derive from the key which signature scheme to use.
Since this can be applied to all types of keys, we change the selection
of the encoding type to be driven by the key's signature scheme rather
than by the hash type.

Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for parsing of x509 certificates that contain ECDSA keys,
such as NIST P256, that have been signed by a CA using any of the
current SHA hash algorithms.

Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.

Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.

Summary of changes:

* crypto/ecdsa.c
  - add ecdsa_nist_p384_init_tfm
  - register and unregister P384 tfm

* crypto/testmgr.c
  - add test vector for P384 on vector of tests

* crypto/testmgr.h
  - add test vector params for P384(sha1, sha224, sha256, sha384
    and sha512)
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the math needed for NIST P384 and adapt certain functions'
parameters so that the ecc_curve is passed to vli_mmod_fast. This
allows to identify the curve by its name prefix and the appropriate
function for fast mmod calculation can be used.

Summary of changes:

* crypto/ecc.c
  - add vli_mmod_fast_384
  - change some routines to pass ecc_curve forward until vli_mmod_fast

* crypto/ecc.h
  - add ECC_CURVE_NIST_P384_DIGITS
  - change ECC_MAX_DIGITS to P384 size
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the parameters for the NIST P384 curve and define a new curve ID
for it. Make the curve available in ecc_get_curve.

Summary of changes:

* crypto/ecc_curve_defs.h
  - add nist_p384 params

* include/crypto/ecdh.h
  - add ECC_CURVE_NIST_P384

* crypto/ecc.c
  - change ecc_get_curve to accept nist_p384
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
  Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
  is A NIST cryptographic standard algorithm. Only signature verification
  is implemented.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add OIDs for ECDSA with SHA224/256/384/512.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

platform_get_irq() has already checked and printed the return value,
the printing here is nothing special, it is not necessary at all.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cleanup static check errors for SEC
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1.delete the original complex method of obtaining the
current device and replace it with the initialized
device pointer.
2.fixes some coding style
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the log is output here, the device has not
been initialized yet.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Drop the local definition of a byte swapping macro and use the common
one instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The scalar AES implementation has some locally defined macros which
reimplement things that are now available in macros defined in
assembler.h. So let's switch to those.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The new ARM BLAKE2s code doesn't work correctly (fails the self-tests)
in big endian kernel builds because it doesn't swap the endianness of
the message words when loading them.  Fix this.

Fixes: 5172d322 ("crypto: arm/blake2s - add ARM scalar optimized BLAKE2s")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes missing prototype warnings in crypto/aegis128-neon.c.

Fixes: a4397635 ("crypto: aegis128 - provide a SIMD...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As of commit bb475230 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.

This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>