- 30 Mar, 2015 7 commits
-
-
Mikulas Patocka authored
commit 09ee96b2 upstream. The "dm snapshot: suspend origin when doing exception handover" commit fixed a exception store handover bug associated with pending exceptions to the "snapshot-origin" target. However, a similar problem exists in snapshot merging. When snapshot merging is in progress, we use the target "snapshot-merge" instead of "snapshot-origin". Consequently, during exception store handover, we must find the snapshot-merge target and suspend its associated mapped_device. To avoid lockdep warnings, the target must be suspended and resumed without holding _origins_lock. Introduce a dm_hold() function that grabs a reference on a mapped_device, but unlike dm_get(), it doesn't crash if the device has the DMF_FREEING flag set, it returns an error in this case. In snapshot_resume() we grab the reference to the origin device using dm_hold() while holding _origins_lock (_origins_lock guarantees that the device won't disappear). Then we release _origins_lock, suspend the device and grab _origins_lock again. NOTE to stable@ people: When backporting to kernels 3.18 and older, use dm_internal_suspend and dm_internal_resume instead of dm_internal_suspend_fast and dm_internal_resume_fast. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [ luis: backported to 3.16: as suggested by the author: - replaced dm_internal_suspend_fast by dm_internal_suspend - replaced dm_internal_resume_fast by dm_internal_resume ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Mikulas Patocka authored
commit b735fede upstream. In the function snapshot_resume we perform exception store handover. If there is another active snapshot target, the exception store is moved from this target to the target that is being resumed. The problem is that if there is some pending exception, it will point to an incorrect exception store after that handover, causing a crash due to dm-snap-persistent.c:get_exception()'s BUG_ON. This bug can be triggered by repeatedly changing snapshot permissions with "lvchange -p r" and "lvchange -p rw" while there are writes on the associated origin device. To fix this bug, we must suspend the origin device when doing the exception store handover to make sure that there are no pending exceptions: - introduce _origin_hash that keeps track of dm_origin structures. - introduce functions __lookup_dm_origin, __insert_dm_origin and __remove_dm_origin that manipulate the origin hash. - modify snapshot_resume so that it calls dm_internal_suspend_fast() and dm_internal_resume_fast() on the origin device. NOTE to stable@ people: When backporting to kernels 3.12-3.18, use dm_internal_suspend and dm_internal_resume instead of dm_internal_suspend_fast and dm_internal_resume_fast. When backporting to kernels older than 3.12, you need to pick functions dm_internal_suspend and dm_internal_resume from the commit fd2ed4d2. Signed-off-by:
-
Mikulas Patocka authored
commit ab7c7bb6 upstream. __dm_destroy() must take the suspend_lock so that its presuspend and postsuspend calls do not race with an internal suspend. Signed-off-by:
-
Joe Thornber authored
commit 5f027a3b upstream. It was always intended that a read to an unprovisioned block will return zeroes regardless of whether the pool is in read-only or read-write mode. thin_bio_map() was inconsistent with its handling of such reads when the pool is in read-only mode, it now properly zero-fills the bios it returns in response to unprovisioned block reads. Eliminate thin_bio_map()'s special read-only mode handling of -ENODATA and just allow the IO to be deferred to the worker which will result in pool->process_bio() handling the IO (which already properly zero-fills reads to unprovisioned blocks). Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit aa991b3b upstream. Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit 0d278362 upstream. fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 24 Mar, 2015 10 commits
-
-
Eric Dumazet authored
commit 355a901e upstream. While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Catalin Marinas authored
commit 91edd096 upstream. Commit db31c55a (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b9 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3a net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7da (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Josh Hunt authored
commit d22e1537 upstream. tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by:
-
Steven Barth authored
commit 73ba57bf upstream. for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by:
Steven Barth <cyrus@openwrt.org> Signed-off-by:
-
Ondrej Zary authored
commit 8d006e01 upstream. This reverts commit 11ad714b because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Al Viro authored
commit 7d985ed1 upstream. [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
-
Al Viro authored
commit 3eeff778 upstream. It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
Eric Dumazet authored
commit c8e2c80d upstream. inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by:
-
Arnd Bergmann authored
commit f862e07c upstream. The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
commit b1cb59cf upstream. sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
- 23 Mar, 2015 23 commits
-
-
David S. Miller authored
commit 2077cef4 upstream. Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by:
David Ahern <david.ahern@oracle.com> Reported-by:
Bob Picco <bpicco@meloft.net> Signed-off-by:
-
David Ahern authored
commit 31aaa98c upstream. With the increase in number of CPUs calls to functions that dump output to console (e.g., arch_trigger_all_cpu_backtrace) can take a long time to complete. If IRQs are disabled eventually the NMI watchdog kicks in and creates more havoc. Avoid by telling the NMI watchdog everything is ok. Signed-off-by:
-
David Ahern authored
commit d51291cb upstream. Currently perf-stat (aka, counting mode) does not work: $ perf stat ls ... Performance counter stats for 'ls': 1.585665 task-clock (msec) # 0.580 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.054 M/sec <not supported> cycles <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend <not supported> instructions <not supported> branches <not supported> branch-misses 0.002735100 seconds time elapsed The reason is that state is never reset (stays with PERF_HES_UPTODATE set). Add a call to sparc_pmu_enable_event during the added_event handling. Clean up the encoding since pmu_start calls sparc_pmu_enable_event which does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call to sparc_perf_event_set_period can be removed as well. With this patch: $ perf stat ls ... Performance counter stats for 'ls': 1.552890 task-clock (msec) # 0.552 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.055 M/sec 5,748,997 cycles # 3.702 GHz <not supported> stalled-cycles-frontend:HG <not supported> stalled-cycles-backend:HG 1,684,362 instructions:HG # 0.29 insns per cycle 295,133 branches:HG # 190.054 M/sec 28,007 branch-misses:HG # 9.49% of all branches 0.002815665 seconds time elapsed Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
David Ahern authored
commit 5b0d4b55 upstream. perf_pmu_disable is called by core perf code before pmu->del and the enable function is called by core perf code afterwards. No need to call again within sparc_pmu_del. Ditto for pmu->add and sparc_pmu_add. Signed-off-by:
-
Rob Gardner authored
commit 53eb2516 upstream. A bug was reported that the semtimedop() system call was always failing eith ENOSYS. Since SEMCTL is defined as 3, and SEMTIMEDOP is defined as 4, the comparison "call <= SEMCTL" will always prevent SEMTIMEDOP from getting through to the semaphore ops switch statement. This is corrected by changing the comparison to "call <= SEMTIMEDOP". Orabug: 20633375 Signed-off-by:
Rob Gardner <rob.gardner@oracle.com> Signed-off-by:
-
Andreas Larsson authored
commit 66d0f7ec upstream. Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Jakub Sitnicki authored
commit ef567cf9 upstream. Microsoft Natural Wireless Ergonomic Keyboard 7000 has special My Favorites 1..5 keys which are handled through a vendor-defined usage page (0xff05). Apply MS_ERGONOMY quirks handling to USB PID 0x071d (Microsoft Microsoft 2.4GHz Transceiver V1.0) so that the My Favorites 1..5 keys are reported as KEY_F14..18 events. Link: https://bugzilla.kernel.org/show_bug.cgi?id=52841Signed-off-by:
Jakub Sitnicki <jsitnicki@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Björn Gerhart authored
commit b20b1618 upstream. In order to support an older USB cradle by Denso, I added its vendor- and product-ID to the array of usb_device_id acm_ids. In this way cdc-acm feels responsible for this cradle. The related /dev/ttyACM node is being created properly, and the data transfer works. However, later cradle models by Denso do have proper descriptors, so the patch is not required for these. At the same time both the older and the later model have the same vendor- and product-ID, but they both work with the patched driver. Declaration of the Denso cradles I tested: - both models have the same IDs: vendorID 0x076d, productID 0x0006 - older model: Denso CU-321 (descriptors not properly set) - later model: Denso CU-821 (with proper descriptors) Signed-off-by:
Bjoern Gerhart <oss@airbjorn.de> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Felipe Balbi authored
commit 3e43a072 upstream. We need a pm_runtime_get_sync() call from within musb_gadget_pullup() to make sure registers are accessible at that time. The problem is that musb_gadget_pullup() is called with IRQs disabled and, because of that, we need to tell pm_runtime that this pm_runtime_get_sync() is IRQ safe. We can simply add pm_runtime_irq_safe(), however, because we need to make our read/write accessor function pointers have been initialized before trying to use them. This means that all pm_runtime initialization for musb_core needs to be moved down so that when we call pm_runtime_irq_safe(), the pm_runtime_get_sync() that it calls on the parent, won't cause a crash due to NULL musb_read/write accessors. Reported-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Felipe Balbi authored
commit 9ec36f7f upstream. f_phonet's ->set_alt() method will call usb_ep_disable() potentially on an endpoint which is already disabled. That's something the gadget/function driver must guarantee that it's always balanced. In order to balance the calls, just make sure the endpoint was enabled before by means of checking the validity of driver_data. Reported-by:
-
Jim Keir authored
commit afd700d9 upstream. The FF2 driver (usbhid/hid-pidff.c) sends commands to the stick during ff_init. However, this is called inside a block where driver_input_lock is locked, so the results of these initial commands are discarded. This behavior is the "killer", without this nothing else works. ff_init issues commands using "hid_hw_request". This eventually goes to hid_input_report, which returns -EBUSY because driver_input_lock is locked. The change is to delay the ff_init call in hid-core.c until after this lock has been released. Calling hid_device_io_start() releases the lock so the device can be configured. We also need to call hid_device_io_stop() on exit for the lock to remain locked while ending the init of the drivers. [ benjamin.tissoires@redhat.com: imrpoved the changelog a lot ] Signed-off-by:
Jim Keir <jimkeir@oracledbadirect.com> Reviewed-by:
Benjamin.tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Alan Wu authored
commit 5e7e9e90 upstream. Based on code for the US Surface Type Cover 3 from commit be3b1634 ("HID: add support for MS Surface Pro 3 Type Cover"): Signed-off-by:
Alan Wu <alan.c.wu@gmail.com> Tested-by:
Karlis Dreizis <karlisdreizis@gmail.com> Signed-off-by:
-
Ross Skaliotis authored
commit cbd366be upstream. Enabled quirks necessary for correct battery capacity reporting. Cleaned up surrounding style. Signed-off-by:
Ross Skaliotis <rskaliotis@gmail.com> Signed-off-by:
-
Alan Wu authored
commit be3b1634 upstream. Surface Pro 3 Type Cover that works with Ubuntu (and possibly Arch) from this thread. Both trackpad and keyboard work after compiling my own kernel. http://ubuntuforums.org/showthread.php?t=2231207&page=2&s=44910e0c56047e4f93dfd9fea58121ef Also includes Jarrad Whitaker's message which sources http://winaero.com/blog/how-to-install-linux-on-surface-pro-3/ which he says is sourced from a Russian site Signed-off-by:
-
Anton Staaf authored
commit 679315e5 upstream. Add support for Google devices that export simple serial interfaces using the vendor specific SubClass/Protocol pair 0x50/0x01. Signed-off-by:
Anton Staaf <robotboy@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> [johan: move id entries and update Kconfig] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
commit 26bac95a upstream. It's an invalid approach to assume that among two divider values the one nearer the exact divider is the better one. Assume a parent rate of 1000 Hz, a divider with CLK_DIVIDER_POWER_OF_TWO and a target rate of 89 Hz. The exact divider is ~ 11.236 so 8 and 16 are the candidates to choose from yielding rates 125 Hz and 62.5 Hz respectivly. While 8 is nearer to 11.236 than 16 is, the latter is still the better divider as 62.5 is nearer to 89 than 125 is. Fixes: 774b5143 (clk: divider: Add round to closest divider) Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
commit da321133 upstream. The rate provided at the output of a clk-divider is calculated as: DIV_ROUND_UP(parent_rate, div) since commit b11d282d (clk: divider: fix rate calculation for fractional rates). So to yield a rate not bigger than r parent_rate must be <= r * div. The effect of choosing a parent rate that is too big as was done before this patch results in wrongly ruling out good dividers. Note that this is not a complete fix as __clk_round_rate might return a value >= its 2nd parameter. Also for dividers with CLK_DIVIDER_ROUND_CLOSEST set the calculation is not accurate. But this fixes the test case by Sascha Hauer that uses a chain of three dividers under a fixed clock. Fixes: b11d282d (clk: divider: fix rate calculation for fractional rates) Suggested-by:
-
Vignesh R authored
commit 7d53d255 upstream. ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 4da1c677 ("add tbclk data for ehrpwm") Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Vignesh R authored
commit 6e22616e upstream. ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 9e100eba: ("Fix ehrpwm tbclk data") Signed-off-by:
-
Ravikumar Kattekola authored
commit d2192ea0 upstream. Fixes: ee6c7507 (ARM: dts: dra7 clock data) On DRA7x, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock. But the bypass input is not directly routed to bypass clkout instead both CLKINP and CLKINPULOW are connected to bypass clkout via a mux. This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL and it's POR value is zero which selects the CLKINP as bypass clkout. which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck Fix this by adding another mux clock as parent in bypass mode. This design is common to most of the PLLs and the rest have only one bypass clock. Below is a list of the DPLLs that need this fix: DPLL_IVA, DPLL_DDR, DPLL_DSP, DPLL_EVE, DPLL_GMAC, DPLL_PER, DPLL_USB and DPLL_CORE Signed-off-by:
Ravikumar Kattekola <rk@ti.com> Acked-by:
-
Alexandre Belloni authored
commit 84e87166 upstream. at91rm9200 standby and suspend to ram has been broken since 00482a40. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a40 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Takashi Iwai authored
commit ef403edb upstream. The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ryusuke Konishi authored
commit 283ee148 upstream. According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck during recovery at mount time. The code path that caused the deadlock was as follows: nilfs_fill_super() load_nilfs() nilfs_salvage_orphan_logs() * Do roll-forwarding, attach segment constructor for recovery, and kick it. nilfs_segctor_thread() nilfs_segctor_thread_construct() * A lock is held with nilfs_transaction_lock() nilfs_segctor_do_construct() nilfs_segctor_drop_written_files() iput() iput_final() write_inode_now() writeback_single_inode() __writeback_single_inode() do_writepages() nilfs_writepage() nilfs_construct_dsync_segment() nilfs_transaction_lock() --> deadlock This can happen if commit 7ef3ff2f ("nilfs2: fix deadlock of segment constructor over I_SYNC flag") is applied and roll-forward recovery was performed at mount time. The roll-forward recovery can happen if datasync write is done and the file system crashes immediately after that. For instance, we can reproduce the issue with the following steps: < nilfs2 is mounted on /nilfs (device: /dev/sdb1) > # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k count=1 && reboot -nfh < the system will immediately reboot > # mount -t nilfs2 /dev/sdb1 /nilfs The deadlock occurs because iput() can run segment constructor through writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags. The above commit changed segment constructor so that it calls iput() asynchronously for inodes with i_nlink == 0, but that change was imperfect. This fixes the another deadlock by deferring iput() in segment constructor even for the case that mount is not finished, that is, for the case that MS_ACTIVE flag is not set. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by:
Yuxuan Shui <yshuiv7@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
