- 10 Feb, 2023 4 commits
-
-
Christophe Leroy authored
Until now a stack frame was set at all time due to the need to keep tail call counter in the stack. But since commit 89d21e25 ("powerpc/bpf/32: Fix Oops on tail call tests") the tail call counter is passed via register r4. It is therefore not necessary anymore to have a stack frame for that. Just like PPC64, implement bpf_has_stack_frame() and only sets the frame when needed. The difference with PPC64 is that PPC32 doesn't have a redzone, so the stack is required as soon as non volatile registers are used or when tail call count is set up. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix commit reference in change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/62d7b654a3cfe73d998697cb29bbc5ffd89bfdb1.1675245773.git.christophe.leroy@csgroup.eu
-
Christophe Leroy authored
r4 is cleared at function entry and used as tail call count. But when the function does not perform tail call, r4 is ignored, so no need to clear it. Replace it by a NOP in that case. Signed-off-by:
-
Christophe Leroy authored
That test was introducted in 2006 by commit 00ae36de ("[POWERPC] Better check in show_instructions"). At that time, there was no BPF progs. As seen in message of commit 89d21e25 ("powerpc/bpf/32: Fix Oops on tail call tests"), when a page fault occurs in test_bpf.ko for instance, the code is dumped as XXXXXXXXs. Allthough __kernel_text_address() checks is_bpf_text_address(), it seems it is not enough. Today, show_instructions() uses get_kernel_nofault() to read the code, so there is no real need for additional verifications. ARM64 and x86 don't do any additional check before dumping instructions. Do the same and remove __kernel_text_address() in show_instructions(). Signed-off-by:
-
Ganesh Goudar authored
For all unrecoverable errors we are missing to log the error, Since machine_check_log_err() is not getting called for unrecoverable errors. machine_check_log_err() is called from deferred handler, To run deferred handlers we have to do irq work raise from the exception handler. For recoverable errors exception vector code takes care of running deferred handlers. For unrecoverable errors raise irq work in save_mce_event(), So that we log the error from MCE deferred handler. Log without this change MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered] MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [0000000010000df4] MCE: CPU27: Initiator CPU MCE: CPU27: Unknown Log with this change MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered] MCE: CPU24: PID: 1589811 Comm: inject-ra-err NIP: [0000000010000e48] MCE: CPU24: Initiator CPU MCE: CPU24: Unknown RTAS: event: 5, Type: Platform Error (224), Severity: 3 Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
-
- 09 Feb, 2023 5 commits
-
-
Benjamin Gray authored
A couple of tests roll their own auto-allocating file read logic. Add a generic implementation and convert them to use it. Signed-off-by:
Benjamin Gray <bgray@linux.ibm.com> Signed-off-by:
-
Benjamin Gray authored
Add helper functions to read and write (unsigned) long values directly from/to files. One of the kernel interfaces uses hex strings, so we need to allow passing a base too. Signed-off-by:
-
Benjamin Gray authored
Often a file is expected to hold an integral value. Existing functions will use a C stdlib function like atoi or strtol to parse the file. These operations are error prone, with complicated error conditions (atoi returns 0 if not a number, and is undefined behaviour if not in range. strtol returns 0 if not a number, and LONG_MIN/MAX if not in range + sets errno to ERANGE). Signed-off-by:
-
Benjamin Gray authored
Debugfs files are not always integers, so make *_file return/write a byte buffer, and *_int deal with int values specifically. This increases consistency with the other file read/write helpers. Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Benjamin Gray authored
File read/write is reimplemented in about 5 different ways in the various PowerPC selftests. This indicates it should be a common util. Add a common read_file / write_file implementation and convert users to it where (easily) possible. Signed-off-by:
-
- 08 Feb, 2023 5 commits
-
-
Greg Kroah-Hartman authored
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Nicholas Piggin authored
This looks like it came across from x86, but x86 uses TLB_FLUSH_ALL as a parameter to internal functions. Powerpc never sets it anywhere. Remove the associated logic and leave a warning for now. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The MMU_NO_CONTEXT checks are an unnecessary complication. Make these warn to prepare to remove them in future. Signed-off-by:
-
Nicholas Piggin authored
need_flush_all is only set by arch code to instruct generic tlb_flush to flush all. It is never set by powerpc, so it can be removed. Signed-off-by:
-
Christophe Leroy authored
CLANG only knows the following CPUs: generic, 440, 450, 601, 602, 603, 603e, 603ev, 604, 604e, 620, 630, g3, 7400, g4, 7450, g4+, 750, 8548, 970, g5, a2, e500, e500mc, e5500, power3, pwr3, power4, pwr4, power5, pwr5, power5x, pwr5x, power6, pwr6, power6x, pwr6x, power7, pwr7, power8, pwr8, power9, pwr9, power10, pwr10, powerpc, ppc, ppc32, powerpc64, ppc64, powerpc64le, ppc64le, futur Disable other ones when CC_IS_CLANG. Signed-off-by:
-
- 07 Feb, 2023 1 commit
-
-
Pali Rohár authored
The "pci-OF-bus-map" property was declared deprecated in 2006 [1] and to the best of everyone's knowledge is not used by anything anymore [2]. The creation of the property was disabled on powermac (arch/powerpc) in 2005 by commit 35499c01 ("powerpc: Merge in 64-bit powermac support."). But it is still created by default on CHRP. On powermac the actual map (pci_to_OF_bus_map) is still used by default, even though the device tree property is not created. Add an option to enable/disable use of the pci_to_OF_bus_map, and creation of the property (on CHRP). Disabling the option allows enabling CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT which allows "normal" bus numbering and more than 256 buses, like 64-bit and other architectures. Mark the new option as default n, the intention is that the option and the code will be removed in a future release. [1]: https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/ [2]: https://lore.kernel.org/all/575f239205e8635add81c9f902b7d9db7beb83ea.camel@kernel.crashing.org/Signed-off-by:
Pali Rohár <pali@kernel.org> [mpe: Reword commit & help text, shrink option name, rework to fix build errors] Signed-off-by:
-
- 30 Jan, 2023 10 commits
-
-
Pali Rohár authored
It makes sense to enable CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default (when possible by dependencies) to take advantages of all 256 PCI buses on each PCI domain, like it is already on all other kernel architectures. Fixes: 56635681 ("powerpc/pci: Add config option for using all 256 PCI buses") Signed-off-by:
-
Nicholas Piggin authored
Interrupt handlers called by soft-pending irq replay code can run softirqs, softirq replay enables and disables local irqs, which allows interrupts to come in including soft-masked interrupts, and it can cause pending irqs to be replayed again. That makes the soft irq replay state machine and possible races more complicated and fragile than it needs to be. Use irq_enter/irq_exit around irq replay to prevent softirqs running while interrupts are being replayed. Softirqs will now be run at the irq_exit() call after all the irq replaying is done. This prevents irqs being replayed while irqs are being replayed, and should hopefully make things simpler and easier to think about and debug. A new PACA_IRQ_REPLAYING is added to prevent asynchronous interrupt handlers hard-enabling EE while pending irqs are being replayed, because that causes new pending irqs to arrive which is also a complexity. This means pending irqs won't be profiled quite so well because perf irqs can't be taken. Signed-off-by:
-
Christophe Leroy authored
NO_IRQ is a relic from the old days. It is not used anymore in core functions. By the way, function irq_of_parse_and_map() returns value 0 on error. In some drivers, NO_IRQ is erroneously used to check the return of irq_of_parse_and_map(). It is not a real bug today because the only architectures using the drivers being fixed by this patch define NO_IRQ as 0, but there are architectures which define NO_IRQ as -1. If one day those architectures start using the non fixed drivers, there will be a problem. Long time ago Linus advocated for not using NO_IRQ, see https://lore.kernel.org/all/Pine.LNX.4.64.0511211150040.13959@g5.osdl.org He re-iterated the same view recently in https://lore.kernel.org/all/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com So test !irq instead of tesing irq == NO_IRQ. All other usage of NO_IRQ for powerpc were removed in previous cycles so the time has come to remove NO_IRQ completely for powerpc. Signed-off-by:
-
Nathan Lynch authored
At the time commit f97bb36f ("powerpc/rtas: Turn rtas lock into a raw spinlock") was written, the spinlock lockup detection code called __delay(), which will not make progress if the timebase is not advancing. Since the interprocessor timebase synchronization sequence for chrp, cell, and some now-unsupported Power models can temporarily freeze the timebase through an RTAS function (freeze-time-base), the lock that serializes most RTAS calls was converted to arch_spinlock_t to prevent kernel hangs in the lockup detection code. However, commit bc88c10d ("locking/spinlock/debug: Remove spinlock lockup detection code") removed that inconvenient property from the lock debug code several years ago. So now it should be safe to reintroduce generic locks into the RTAS support code, primarily to increase lockdep coverage. Making rtas_lock a spinlock_t would violate lock type nesting rules because it can be acquired while holding raw locks, e.g. pci_lock and irq_desc->lock. So convert it to raw_spinlock_t. There's no apparent reason not to upgrade timebase_lock as well. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
Only code internal to the RTAS subsystem needs access to the central lock and parameter block. Remove these from the globally visible 'rtas' struct and make them file-static in rtas.c. Some changed lines in rtas_call() lack appropriate spacing around operators and cause checkpatch errors; fix these as well. Suggested-by:
Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
Laurent Dufour <laurent.dufour@fr.ibm.com> Signed-off-by:
-
Nathan Lynch authored
The first symbol exports of RTAS functions and data came with the (now removed) scanlog driver in 2003: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and the exports of rtas_call() etc have remained non-GPL. As new APIs have been added to the RTAS subsystem, their symbol exports have followed the convention set by existing code. However, the historical evidence is that RTAS function exports have been added over time only to satisfy the needs of in-kernel users, and these clients must have fairly intimate knowledge of how the APIs work to use them safely. No out of tree users are known, and future ones seem unlikely. Arguably the default for RTAS symbols should have become EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and exceptions can be evaluated as needed. Signed-off-by:
-
Michael Ellerman authored
Some RTAS symbols are never used by modular code, drop their exports. Signed-off-by:
-
Nathan Lynch authored
No modular code needs access to the 'rtas' struct, so remove the symbol export. Suggested-by:
-
Pali Rohár authored
When CONFIG_TARGET_CPU is specified then pass its value to the compiler -mcpu option. This fixes following build error when building kernel with powerpc e500 SPE capable cross compilers: BOOTAS arch/powerpc/boot/crt0.o powerpc-linux-gnuspe-gcc: error: unrecognized argument in option ‘-mcpu=powerpc’ powerpc-linux-gnuspe-gcc: note: valid arguments to ‘-mcpu=’ are: 8540 8548 native make[1]: *** [arch/powerpc/boot/Makefile:231: arch/powerpc/boot/crt0.o] Error 1 Similar change was already introduced for the main powerpc Makefile in commit 446cda1b ("powerpc/32: Don't always pass -mcpu=powerpc to the compiler"). Fixes: 40a75584 ("powerpc/boot: Build wrapper for an appropriate CPU") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: -
Christophe Leroy authored
Since commit 0069f3d1 ("powerpc/64e: Tie PPC_BOOK3E_64 to PPC_E500MC"), the only possible BOOK3E/64 are E500, so no need of a default CPU over the E5500. When the user selects book3e, they must have an e500 compatible compiler, and it won't work anymore with the default -mcpu=power64, see commit d6b551b8 ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')"). For book3s/64, replace GENERIC_CPU by POWERPC64_CPU to match the PPC32 POWERPC_CPU, and set a default mpcu value in Kconfig directly. When a user selects a particular CPU, they must ensure the compiler has the requested capability. Therefore, remove hidden fallback, instead offer user the possibility to say they want to use the toolchain default. Fixes: d6b551b8 ("powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')") Reported-by:
-
- 26 Jan, 2023 2 commits
-
-
Josh Poimboeuf authored
When a module with a livepatched function is unloaded and then reloaded, klp attempts to dynamically re-patch it. On ppc64, that fails with the following error: module_64: livepatch_nfsd: Expected nop after call, got e8410018 at e_show+0x60/0x548 [livepatch_nfsd] livepatch: failed to initialize patch 'livepatch_nfsd' for module 'nfsd' (-8) livepatch: patch 'livepatch_nfsd' failed for module 'nfsd', refusing to load module 'nfsd' The error happens because the restore r2 instruction had already previously been written into the klp module's replacement function when the original function was patched the first time. So the instruction wasn't a nop as expected. When the restore r2 instruction has already been patched in, detect that and skip the warning and the instruction write. Signed-off-by:
Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Song Liu <song@kernel.org> Signed-off-by:
-
Josh Poimboeuf authored
restore_r2() returns 1 on success, which is surprising for a non-boolean function. Change it to return 0 on success and -errno on error to match kernel coding convention. Signed-off-by:
-
- 10 Jan, 2023 1 commit
-
-
Michael Ellerman authored
Merge our fixes branch to bring in the linker script fixes for older toolchains.
-
- 05 Jan, 2023 3 commits
-
-
Michael Ellerman authored
Although the powerpc linker script mentions .comment in the DISCARD section, that has never actually caused it to be discarded, because the earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes .comment. However commit 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") introduced an earlier use of DISCARD as part of the RO_DATA macro. With binutils < 2.36 that causes the DISCARD directives later in the script to be applied earlier, causing .comment to actually be discarded. It's confusing to explicitly include and discard .comment, and even more so if the behaviour depends on the toolchain version. So don't discard .comment in order to maintain the existing behaviour in all cases. Fixes: 83a092cf ("powerpc: Link warning for orphan sections") Signed-off-by:
-
Michael Ellerman authored
Relocatable kernels must not discard relocations, they need to be processed at runtime. As such they are included for CONFIG_RELOCATABLE builds in the powerpc linker script (line 340). However they are also unconditionally discarded later in the script (line 414). Previously that worked because the earlier inclusion superseded the discard. However commit 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") introduced an earlier use of DISCARD as part of the RO_DATA macro (line 137). With binutils < 2.36 that causes the DISCARD directives later in the script to be applied earlier, causing .rela* to actually be discarded at link time, leading to build warnings and a kernel that doesn't boot: ld: warning: discarding dynamic section .rela.init.rodata Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE is disabled. Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") Signed-off-by:
-
Michael Ellerman authored
The powerpc linker script explicitly includes .exit.text, because otherwise the link fails due to references from __bug_table and __ex_table. The code is freed (discarded) at runtime along with .init.text and data. That has worked in the past despite powerpc not defining RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker script (line 410), and the explicit inclusion of .exit.text earlier (line 280) supersedes the discard. However commit 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") introduced an earlier use of DISCARD as part of the RO_DATA macro (line 136). With binutils < 2.36 that causes the DISCARD directives later in the script to be applied earlier [1], causing .exit.text to actually be discarded at link time, leading to build errors: '.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in discarded section '.exit.text' of crypto/algboss.o '.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in discarded section '.exit.text' of drivers/nvdimm/core.o Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic DISCARDS macro to not include .exit.text at all. 1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/ Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv") Signed-off-by:
-
- 01 Jan, 2023 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: - Prevent the leaking of a debug timer in futex_waitv() - A preempt-RT mutex locking fix, adding the proper acquire semantics * tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "I'm just back from the mountains, and Dave is out at the beach and should be back in a week again. Just i915 fixes and since Rodrigo bothered to make the pull last week I figured I should warm up gpg and forward this in a nice signed tag as a new years present! - i915 fixes for newer platforms - i915 locking rework to not give up in vm eviction fallback path too early" * tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm: drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence drm/i915/uc: Fix two issues with over-size firmware files drm/i915: improve the catch-all evict to handle lock contention drm/i915: Remove __maybe_unused from mtl_info drm/i915: fix TLB invalidation for Gen12.50 video and compute engines -
Daniel Vetter authored
Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix TLB invalidation for DG2 and newer platforms. (Andrzej) - Remove __maybe_unused from mtl_info (Lucas) - improve the catch-all evict to handle lock contention (Matt Auld) - Fix two issues with over-size (GuC/HuC) firmware files (John) - Fix DSI resume issues on ICL+ (Jani) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
-
- 31 Dec, 2022 2 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix broken BuildID - Add srcrpm-pkg to the help message - Fix the option order for modpost built with musl libc - Fix the build dependency of rpm-pkg for openSUSE * tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: fixdep: remove unneeded <stdarg.h> inclusion kbuild: sort single-targets alphabetically again kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires kbuild: Fix running modpost with musl libc kbuild: add a missing line for help message .gitignore: ignore *.rpm arch: fix broken BuildID for arm64 and riscv kconfig: Add static text for search information in help menu
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: "A single fix to address an issue with wake from suspend with PCS adapters, from Adam" * tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Fix PCS quirk application for suspend
-
- 30 Dec, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix) support adjustments and ACPI backlight handling fixes, mostly for platforms using AMD chips. Specifics: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865 and stop using AMD-specific low-power S0 idle code path for systems with Rembrandt chips and newer (Mario Limonciello)" * tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+ ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865 ACPI: video: Fix Apple GMUX backlight detection ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
-
