- 29 Mar, 2018 4 commits
-
-
Hans Holmberg authored
As a preparation for future bumps of data line persistent storage versions, we need to start checking the emeta line version during recovery. Also slit up the current emeta/smeta version into two bytes (major,minor). Recovering lines with the same major number as the current pblk data line version must succeed. This means that any changes in the persistent format must be: (1) Backward compatible: if we switch back to and older kernel, recovery of lines stored with major == current_major and minor > current_minor must succeed. (2) Forward compatible: switching to a newer kernel, recovery of lines stored with major=current_major and minor < minor must handle the data format differences gracefully(i.e. initialize new data structures to default values). If we detect lines that have a different major number than the current we must abort recovery. The user must manually migrate the data in this case. Previously the version stored in the emeta header was copied from smeta, which has version 1, so we need to set the minor version to 1. Signed-off-by:Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
Unless we check if there are bad sectors in the entire emeta-area we risk ending up with valid bitmap / available sector count inconsistency. This results in lines with a bad chunk at the last LUN marked as bad, so go through the whole emeta area and mark up the invalid sectors. Signed-off-by:
-
Matias Bjørling authored
The identity structure is initialized to zero in the beginning of the nvme_nvm_identity function. The chnl_offset is separately set to zero. Since both the variable and assignment is never changed, remove them. Signed-off-by:
-
Markus Elfring authored
lightnvm/pblk-gc: Delete an error message for a failed memory allocation in pblk_gc_line_prepare_ws() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
-
- 28 Mar, 2018 1 commit
-
-
Keith Busch authored
The PCI interrupt vectors intended to be associated with a queue may not start at 0; a driver may allocate pre_vectors for special use. This patch adds an offset parameter so blk-mq may find the intended affinity mask and updates all drivers using this API accordingly. Cc: Don Brace <don.brace@microsemi.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: <linux-scsi@vger.kernel.org> Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 27 Mar, 2018 2 commits
-
-
Omar Sandoval authored
Even after the previous patch to drop lo_ctl_mutex while calling vfs_getattr(), there are other cases where we can end up sleeping for a long time while holding lo_ctl_mutex. Let's avoid the uninterruptible sleep from the ioctls. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
We hit an issue where a loop device on NFS was stuck in loop_get_status() doing vfs_getattr() after the NFS server died, which caused a pile-up of uninterruptible processes waiting on lo_ctl_mutex. There's no reason to hold this lock while we wait on the filesystem; let's drop it so that other processes can do their thing. We need to grab a reference on lo_backing_file while we use it, and we can get rid of the check on lo_device, which has been unnecessary since commit a34c0ae9 ("[PATCH] loop: remove the bio remapping capability") in the linux-history tree. Signed-off-by:
-
- 26 Mar, 2018 30 commits
-
-
Paolo Valente authored
If a storage device handled by BFQ happens to be slower than 7.5 KB/s for a certain amount of time (in the order of a second), then the estimated peak rate of the device, maintained in BFQ, becomes equal to 0. The reason is the limited precision with which the rate is represented (details on the range of representable values in the comments introduced by this commit). This leads to a division-by-zero error where the estimated peak rate is used as divisor. Such a type of failure has been reported in [1]. This commit addresses this issue by: 1. Lower-bounding the estimated peak rate to 1 2. Adding and improving comments on the range of rates representable [1] https://www.spinics.net/lists/kernel/msg2739205.htmlSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Matias Bjørling authored
Enable the lightnvm integration to use the nvme_get_log_ext() function. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Have a common table of mappings from numerical transport ids to names, and zero the transport specific area in common code in nvmet_addr_trtype_store. Signed-off-by:
-
Max Gurtovoy authored
Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Nitzan Carmi authored
For consistancy reasons, any fabric-specific works (e.g error recovery/reconnect) should be canceled in nvme_stop_ctrl, as for all other NVMe pending works (e.g. scan, keep alive). The patch aims to simplify the logic of the code, as we now only rely on a vague demand from any fabric to flush its private workqueues at the beginning of .delete_ctrl op. Signed-off-by:
Nitzan Carmi <nitzanc@mellanox.com> Reviewed-by:
-
Nitzan Carmi authored
While error recovery is ongoing, it is OK to move ctrl to DELETING state (from concurrent delete_work). Thus we don't need a warning for that case. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Keith Busch authored
If a task is holding a reference to a namespace on a removed controller, the head will not be released. If the same controller is added again later, its namespaces may not be successfully added. Instead, the user will see kernel message "Duplicate IDs for nsid <X>". This patch fixes that by skipping heads that don't have namespaces when considering if a new namespace is safe to add. Reported-by:
Alex Gagniuc <Alex_Gagniuc@Dellteam.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Max Gurtovoy authored
The .remove_one function is called for any ib_device removal. In case the removed device has no reference in our driver, there is no need to flush the work queue. Reviewed-by:
Israel Rukshin <israelr@mellanox.com> Signed-off-by:
-
Max Gurtovoy authored
The .remove_one function is called for any ib_device removal. In case the removed device has no reference in our driver, there is no need to flush the system work queue. Reviewed-by:
-
Israel Rukshin authored
We free nvmet rdma queues while handling rdma_cm events. In order to avoid this we destroy the qp and the queue after destroying the cm_id which guarantees that all rdma_cm events are done. Signed-off-by:
-
Israel Rukshin authored
Signed-off-by:
-
James Smart authored
When a bio completion calls back into the transport for a back-end io device, the request completion path can free the transport io job structure allowing it to be reused for other operations. The transport has a defer_rcv queue which holds temporary cmd rcv ops while waitng for io job structures. when the job frees, if there's a cmd waiting, it is picked up and submitted for processing, which can call back out to the bio path if it's a read. Unfortunately, what is unknown is the context of the original bio done call, and it may be in a state (softirq) that is not compatible with submitting the new bio in the same calling sequence. This is especially true when using scsi back-end devices as scsi is in softirq when it makes the done call. Correct by scheduling the io to be started via workq rather than calling the start new io path inline to the original bio done path. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
James Smart authored
When reattaching to a removed remoteport that has not yet been fully deleted as it's waiting for reconnect timeouts, be sure to re-set the ports nport id and role. Signed-off-by:
-
James Smart authored
Another abort race: An io request is started, becomes active, and is attempted to be started with the lldd. At the same time the controller is stopped/torndown and an itterator is run to abort the ios. As the io is active, it is added to the outstanding aborted io count. However on the original io request thread, the driver ends up rejecting the io due to the condition that induced the controller teardown. The driver reject path didn't check whether it was in the outstanding io count. This left the count outstanding stopping controller teardown. Correct by, in the driver reject case, setting the state to inactive and checking whether it was in the outstanding io count. Signed-off-by:
-
James Smart authored
The current nvme_fc code, when an io times out, will abort the io on the fc link, then call the error recovery routine to reset the controller. It is during the reset of the controller that the transport will wait for all ios to be aborted before sending a Disconnect LS to the target. However, the reset routine only waits for the io which it generates the abort for to complete. Any io that was aborted just prior to the reset isn't in it's list to wait for. Thus the Disconnect is getting sent before the aborts have completed. Correct by removing the abort in the timeout handler. The reset will generate the abort. At that point the timeout handler can be simplified to request the reset (via the error handler) and restart the timeout timer. Also fixes a small typo in a comment in the reset handler. Signed-off-by:
-
James Smart authored
If there are errors during initial controller create, the transport will teardown the partially initialized controller struct and free the ctlr memory. Trouble is - most of those errors can occur due to asynchronous events happening such io timeouts and subsystem connectivity failures. Those failures invoke async workq items to reset the controller and attempt reconnect. Those may be in progress as the main thread frees the ctrl memory, resulting in NULL ptr oops. Prevent this from happening by having the main ctrl failure thread changing state to DELETING followed by synchronously cancelling any pending queued work item. The change of state will prevent the scheduling of resets or reconnect events. Signed-off-by:
-
Jarosław Janik authored
Yet another "incompatible" Samsung NVMe SSD 960 EVO and Asus motherboard combination. 960 EVO device disappears from PCIe bus within few minutes after boot-up when APST is in use and never gets back. Forcing NVME_QUIRK_NO_APST is the only way to make this drive work with this particular motherboard. NVME_QUIRK_NO_DEEPEST_PS doesn't work, upgrading motherboard's BIOS didn't help either. Since this is a desktop motherboard, the only drawback of not using APST is increased device temperature. Signed-off-by:
Jarosław Janik <jaroslaw.janik@gmail.com> Signed-off-by:
-
Max Gurtovoy authored
nvme_delete_ctrl can be called from various contexts in parallel, and cause duplicated information prints, even though the specific context doesn't perform the actual removal. Instead, print the information when the actual removal occurs. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Keith Busch authored
The nvme-fabrics exports the controller address to sysfs, and we'd like to have parity with this feature for PCIe. This patch provides the appropiate callback and returns the controller address as the pci domain:bus:device.function. Signed-off-by:
-
Matias Bjørling authored
NVMe 1.2.1 extends the get log page interface to include 64 bit offset and increases the number of dwords to 32 bits. Implement for future use. Signed-off-by:
-
Jianchao Wang authored
namespaces_mutext is used to synchronize the operations on ctrl namespaces list. Most of the time, it is a read operation. On the other hand, there are many interfaces in nvme core that need this lock, such as nvme_wait_freeze, and even more interfaces will be added. If we use mutex here, circular dependency could be introduced easily. For example: context A context B nvme_xxx nvme_xxx hold namespaces_mutext require namespaces_mutext sync context B So it is better to change it from mutex to rwsem. Reviewed-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Jianchao Wang authored
nvme_remove_namespaces and nvme_remove_invalid_namespaces reference the ctrl->namespaces list w/o holding namespaces_mutext. It is ok to invoke nvme_ns_remove there, but what if there is others. To be safer, reference the ctrl->namespaces list under namespaces_mutext. Reviewed-by:
-
Jianchao Wang authored
Quiesce IO queues prior to disabling device HMB accesses. A controller using HMB may relay on it to efficiently complete IO commands. Reviewed-by:
-
Thomas Tai authored
Add examples to show how to use nvme fault injection. Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Reviewed-by:
Eric Saint-Etienne <eric.saint.etienne@oracle.com> Signed-off-by:
Karl Volz <karl.volz@oracle.com> Reviewed-by:
-
Thomas Tai authored
Linux's fault injection framework provides a systematic way to support error injection via debugfs in the /sys/kernel/debug directory. This patch uses the framework to add error injection to NVMe driver. The fault injection source code is stored in a separate file and only linked if CONFIG_FAULT_INJECTION_DEBUG_FS kernel config is selected. Once the error injection is enabled, NVME_SC_INVALID_OPCODE with no retry will be injected into the nvme_end_request. Users can change the default status code and no retry flag via debufs. Following example shows how to enable and inject an error. For more examples, refer to Documentation/fault-injection/nvme-fault-injection.txt How to enable nvme fault injection: First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config, recompile the kernel. After booting up the kernel, do the following. How to inject an error: mount /dev/nvme0n1 /mnt echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability cp a.file /mnt Expected Result: cp: cannot stat ‘/mnt/a.file’: Input/output error Message from dmesg: FAULT_INJECTION: forcing a failure. name fault_inject, interval 1, probability 100, space 0, times 1 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: <IRQ> dump_stack+0x5c/0x7d should_fail+0x148/0x170 nvme_should_fail+0x2f/0x50 [nvme_core] nvme_process_cq+0xe7/0x1d0 [nvme] nvme_irq+0x1e/0x40 [nvme] __handle_irq_event_percpu+0x3a/0x190 handle_irq_event_percpu+0x30/0x70 handle_irq_event+0x36/0x60 handle_fasteoi_irq+0x78/0x120 handle_irq+0xa7/0x130 ? tick_irq_enter+0xa8/0xc0 do_IRQ+0x43/0xc0 common_interrupt+0xa2/0xa2 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480 R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x4/0x4 default_idle+0x18/0xf0 do_idle+0x150/0x1d0 cpu_startup_entry+0x6f/0x80 start_kernel+0x4c4/0x4e4 ? set_init_arg+0x55/0x55 secondary_startup_64+0xa5/0xb0 print_req_error: I/O error, dev nvme0n1, sector 9240 EXT4-fs error (device nvme0n1): ext4_find_entry:1436: inode #2: comm cp: reading directory lblock 0 Signed-off-by:
-
Minwoo Im authored
NVME_IDENTIFY_DATA_SIZE was added to linux/nvme.h by following commit. commit 0add5e8e ("nvmet: use NVME_IDENTIFY_DATA_SIZE") Make it use NVME_IDENTIFY_DATA_SIZE define instead of magic value 0x1000 in case of identify data size. Reviewed-by:
Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
Instead of open-coding it. Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
-
Sagi Grimberg authored
Its perfectly valid to assign a nvmet port to listen on "any" IP address (traddr 0.0.0.0 for ipv4 address family) for IP based transport ports. However, we must not return this address in discovery log entries. Instead we need to return the address where the request was accepted on (req->port address). Since this is nvme transport specific, introduce an optional .disc_traddr interface that is designed to check that a port in question is bound to "any" IP address and if so, set the traddr from the port where the request came from. Reviewed-by:
-
Sagi Grimberg authored
Can be useful to check INET_ANY address for both ipv4/ipv6 addresses. Reviewed-by:
-
- 22 Mar, 2018 3 commits
-
-
Shawn Lin authored
dd if=/dev/urandom of=/dev/mmcblk1 bs=4k count=10000 with a SD card hotplug during transfer reports a warning below introduced by commit a063057d ("block: Fix a race between request queue removal and the block cgroup controller"). So we should now remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. [ 410.331226] mmc1: card 59b4 removed [ 410.348583] WARNING: CPU: 0 PID: 5 at block/blk-core.c:785 blk_cleanup_queue+0x138/0x140 [ 410.349294] Modules linked in: [ 410.349570] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.16.0-rc6-next-20180321-00004-gc2ad6a7 #263 [ 410.350363] Hardware name: Excavator-RK3399 Board (DT) [ 410.350819] Workqueue: events_freezable mmc_rescan [ 410.351242] pstate: 60000005 (nZCv daif -PAN -UAO) [ 410.351663] pc : blk_cleanup_queue+0x138/0x140 [ 410.352054] lr : blk_cleanup_queue+0xac/0x140 [ 410.352436] sp : ffff0000092cbb90 [ 410.352727] x29: ffff0000092cbb90 x28: 0000000000000000 [ 410.353195] x27: ffff8000f6f23030 x26: ffff00000904e610 [ 410.353662] x25: ffff8000f17cc808 x24: ffff8000f1038200 [ 410.354128] x23: 0000000000000060 x22: 0000000000000000 [ 410.354595] x21: ffff8000f11748d8 x20: ffff8000f1038200 [ 410.355061] x19: ffff8000f1174200 x18: 0000ffff936347d8 [ 410.355528] x17: 0000ffff935b93c0 x16: ffff0000081263f8 [ 410.355994] x15: 0000000000000000 x14: 0000000000000400 [ 410.356461] x13: 0000000000000001 x12: 0000000000000001 [ 410.356927] x11: 0000000000000040 x10: ffff8000f2400028 [ 410.357393] x9 : ffff8000f2400040 x8 : 0000000000000000 [ 410.357860] x7 : ffff8000f6f3a340 x6 : ffff8000f6f3a340 [ 410.358326] x5 : ffff8000f2400000 x4 : ffff8000f6f3a340 [ 410.358792] x3 : 0000000000000000 x2 : 39c1333e45670800 [ 410.359259] x1 : 0000000000000000 x0 : 0000000000000003 [ 410.359726] Call trace: [ 410.359943] blk_cleanup_queue+0x138/0x140 [ 410.360305] mmc_cleanup_queue+0x2c/0x48 [ 410.360652] mmc_blk_remove_req+0x1c/0x98 [ 410.361005] mmc_blk_remove+0x180/0x1c0 [ 410.361343] mmc_bus_remove+0x1c/0x28 [ 410.361670] device_release_driver_internal+0x154/0x1f0 [ 410.362128] device_release_driver+0x14/0x20 [ 410.362504] bus_remove_device+0xc8/0x108 [ 410.362858] device_del+0x120/0x350 [ 410.363167] mmc_remove_card+0x5c/0xb8 [ 410.363498] mmc_sd_detect+0x40/0x78 [ 410.363813] mmc_rescan+0x19c/0x368 [ 410.364123] process_one_work+0x1ac/0x318 [ 410.364477] worker_thread+0x50/0x450 [ 410.364801] kthread+0xf8/0x128 [ 410.365081] ret_from_fork+0x10/0x18 [ 410.365395] ---[ end trace 268e87a46c28968c ]--- Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Mikulas Patocka authored
I'm getting a slab named "biovec-(1<<(21-12))". It is caused by unintended expansion of the macro BIO_MAX_PAGES. This patch renames it to biovec-max. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Mikulas Patocka authored
Early alpha processors cannot write a single byte or word; they read 8 bytes, modify the value in registers and write back 8 bytes. The type blk_status_t is defined as one byte, it is often written asynchronously by I/O completion routines, this asynchronous modification can corrupt content of nearby bytes if these nearby bytes can be written simultaneously by another CPU. - one example of such corruption is the structure dm_io where "blk_status_t status" is written by an asynchronous completion routine and "atomic_t io_count" is modified synchronously - another example is the structure dm_buffer where "unsigned hold_count" is modified synchronously from process context and "blk_status_t write_error" is modified asynchronously from bio completion routine This patch fixes the bug by changing the type blk_status_t to 32 bits if we are on Alpha and if we are compiling for a processor that doesn't have the byte-word-extension. Signed-off-by:
-
