- 07 Nov, 2016 28 commits
-
-
Stefan Wahren authored
After device_node usage the refcount must be decremented with of_node_put(). Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
The member localport and remoteport are unsigned. So fix the format string accordingly. The issue has been found by Cppcheck. Signed-off-by:
-
Stefan Wahren authored
The service state is dereferenced before BUG_ON and outside of the spin lock. So in order to avoid possible NULL pointer dereferences or races move the whole scope at a safer place. This issue has been found by Cppcheck. Signed-off-by:
-
Michael Zoran authored
vc04_services contains a debug logging mechanism. The log is maintained in a shared memory area between the kernel and the firmware. Changing the sizes of the data in this area would require a firmware change which is distributed independently from the kernel binary. One of the items logged is the address of received messages. This address is a pointer, but the debugging slot used to store the information is a 32 bit integer. Luckily, this value is never interpreted by anything other then debug tools and it is expected that a human debugging the kernel interpret it. This change adds a cast to long before the original cast to int to silence the warning. Signed-off-by:
Michael Zoran <mzoran@crowfest.net> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Michael Zoran authored
The vchiq_copy_from_user function is not portable and is consider "bad practice." Replace this function with a callback based mechanism that is passed downward on the stack. When it is actually time to copy the data, the callback is called to copy the data into the message. This callback is provided internally for userland calls through ioctls on the device. NOTE: Internal clients will need to be modified to work with the new internal API. Test Run: vchiq_test -p 1 vchiq_test -f 10 Both tests pass. Internal API Changes: Change vchi_msg_queue to: int32_t vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle, ssize_t (*copy_callback)(void *context, void *dest, size_t offset, size_t maxsize), void *context, uint32_t data_size ); Remove: vchi_msg_queuev_ex vchi_msg_queuev These functions were not implemented anyway so no need to fix them. It's easier to just remove them. Signed-off-by:
-
Michael Zoran authored
VCHI messages between the CPU and firmware use 32-bit bus addresses. Explicitly set the DMA mask and coherent on all platforms. Signed-off-by:
-
Michael Zoran authored
Call the sg_init_table function to correctly initialze the DMA scatterlist. This function is required to completely initialize the list and is mandatory if DMA debugging is enabled in the build configuration. One of the purposes of sg_init_table is to set the magic "cookie" on each list element and ensure the chain end is marked. Signed-off-by:
-
Anton Leshchenko authored
Align broken line for code readability. Signed-off-by:
Anton Leshchenko <antonl1911@gmail.com> Signed-off-by:
-
Anton Leshchenko authored
Add identifier names for function definition arguments. Signed-off-by:
-
Anton Leshchenko authored
Instead of using shift operation use BIT macro for bit field definitions. Signed-off-by:
-
Anton Leshchenko authored
To make code more readable, remove excessive blank lines. Signed-off-by:
-
David Binder authored
This commit adds a default condition to those case statements that do not already have one. This is done to provide both a logical covering of all conditions, as well as to maintain uniformity with the rest of the Unisys driver set. Signed-off-by:
David Binder <david.binder@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
David Binder authored
Adjusts the formatting of a variable assignment to use fewer line breaks, making it follow the convention used elsewhere in the s-Par driver set. Signed-off-by:
-
David Kershner authored
The function my_device_destroy should call chipset_device_destroy directly instead of calling device_epilog. Since this was the last function to use device_epilog that function was removed as well. Signed-off-by:
Tim Sell <Timothy.Sell@unisys.com> Signed-off-by:
-
David Kershner authored
Function my_device_changestate should call chipset_device_changestate directly instead of calling device_epilog. Signed-off-by:
-
David Kershner authored
The function my_device_changestate was not sending a response if there was an error with the CONTROLVM message. Signed-off-by:
-
David Kershner authored
Don't have my_device_create call device_epilog, have it call chipset_device_create directly instead. Signed-off-by:
-
David Kershner authored
Remove the function bus_epilog since no one is calling it. Signed-off-by:
-
David Kershner authored
Add error handling to bus_create function. Signed-off-by:
-
David Kershner authored
Do proper error handling and return error codes instead of just ignoring them. Signed-off-by:
-
David Kershner authored
Have bus_destroy call chipset_bus_destroy directly instead of going through bus_epilog. Signed-off-by:
-
David Kershner authored
Have bus_create call chipset_bus_create directly instead of going through the function bus_epilog. Signed-off-by:
-
David Kershner authored
This patch addresses the problem that we were sending double responses back to the s-Par Firmware when processing CONTROLVM Messages. Every message responds individually and the epilog functions would send a response as well. Since a message could delay the response, it was decided to remove the extra response from the epilog function. Signed-off-by:
-
Sameer Wadgaonkar authored
Removed intializations from visorchipset_open(), visorchipset_init() and moved the memset in initialize_controlvm_payload_info() down in case of early returns from the function. Signed-off-by:
Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Signed-off-by:
-
Tim Sell authored
Previously, the sysfs entry (assuming traditional sysfs mountpoint): /sys/bus/visorbus/devices/visorbus<n>/client_bus_info violated kernel conventions by printing more than one item. This along with the fact that the data emitted was diagnostic data (intended to shadow the client driver info provided via s-Par livedumps) made it a logical candidate for debugfs. So this patch moves this sysfs entry to debugfs as (assuming traditional debugfs mountpoint): /sys/kernel/debug/visorbus/visorbus<n>/client_bus_info Data for this debugfs is emitted using the preferred seq_file interface, which allowed a vastly-simplified version of vbuschannel_print_devinfo() to format the individual output components. Functionality was verified as follows: [root@sparguest visorbus]# mount | grep debug debugfs on /sys/kernel/debug type debugfs (rw) [root@sparguest visorbus]# pwd /sys/kernel/debug/visorbus [root@sparguest visorbus]# l visorbus1/ total 0 drwxr-xr-x 2 root root 0 Sep 28 16:36 . drwxr-xr-x 4 root root 0 Sep 28 16:36 .. -r--r----- 1 root root 0 Sep 28 16:36 client_bus_info [root@sparguest visorbus]# l visorbus2 total 0 drwxr-xr-x 2 root root 0 Sep 28 16:36 . drwxr-xr-x 4 root root 0 Sep 28 16:36 .. -r--r----- 1 root root 0 Sep 28 16:36 client_bus_info [root@sparguest visorbus]# cat visorbus1/client_bus_info Client device / client driver info for s-Par Console partition (vbus #1): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ [2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+ [3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+ [root@sparguest visorbus]# cat visorbus2/client_bus_info Client device / client driver info for s-Par IOVM partition (vbus #2): chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+ clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+ [0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ [1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+ [2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+ Signed-off-by: -
Tim Sell authored
The kernel convention is for DEVICE_ATTR_RO(<attr>) definitions to occur immediately after the functions that implement the attribute behaviors. DEVICE_ATTR_RO definitions in visorbus_main.c have been moved to comply with this convention. Signed-off-by:
-
Shiva Kerdel authored
The affected files have been modified to remove redundant spaces after casts to solve checkpatch.pl checks. Signed-off-by:
Shiva Kerdel <shiva@exdev.nl> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle This includes two branch merges for elements that may also go via MFD. New device support * cros_ec - new driver to support these Chrome OS contiguous sensors which are behind the Chrome OS embedded controller. Requires a few minor MFD and chrome platform changes. One follow up fix deals with some dependency issues in Kconfig. * mpu-3050 - new driver and device tree bindings for this venerable device. * st_accel - support for the lng2dm an Driver features * ad7192 - Add DVdd regulator handling * ad9832 - Add DVDD regulator handling * at91 - Suspend and resume support * si7020 - Device tree bindings * ti-am335x - DMA support - uses dma to accelerate short bursts of read back rather than full blown DMA buffer support. Greatly improved performance. Includes an MFD addition to give access to the address needed for DMA. * tsl2583 - Device tree bindings Cleanups and minor fixes * ad7192 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg variable to reflect which regulator it is * ad5933 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad7746 - Fix a missing return value (fallout from previous patch set) * ad7780 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad9832 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg regulator to reflect which one it is * ad9834 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * hts221 - Remove a duplicated include * maxim thermocouple - Handle a wrong storage side in read function. Prevent any problems that might be introduced by additions to this driver in future. * tsl2583 - big set from Brian Masney to drive this towards a staging graduation. - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps) - Improved error handling in various functions - Drop redundant power_state custom sysfs attribute. - Use IIO_*_ATTR* macros for remaining attributes. - Return an error code to userspace on invalid parameters being writen to sysfs files. - Add locking to various attribute accesses to remove possible races. - Add defines for various magic numbers. - Use smbus_read_byte_data instead of a write_byte followed by read_byte. - Query only relevant registers in probe. - Tidy up ordering of code comments. - Remove a pointless power off sequence in taos_chip_on. - Don't bother shutting down the chip when updating the lux table. The table is held entirely in the driver and doesn't effect the chip at all. - Drop a redundant i2c call in taos_als_calibrate where the same register is read twice in a row.
-
- 06 Nov, 2016 6 commits
-
-
Brian Masney authored
taos_als_calibrate() queries the control register to determine if the unit is powered on and has the ADC enabled. It then queries the same register a second time to determine if the ADC reading is valid. This patch removes the redundant i2c_smbus_read_byte_data() call. Verified that the driver still functions correctly using a TSL2581 hooked up to a Raspberry Pi 2. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Brian Masney authored
in_illuminance_lux_table_store() shuts down the chip, updates the contents of the lux table, and then turns the chip back on. The values in lux table are not used by the chip and are only used internally by the driver. It is not necessary to change the power state on the chip. This patch removes the calls to taos_chip_off() and taos_chip_on() in in_illuminance_lux_table_store(). Signed-off-by:
-
Brian Masney authored
taos_chip_on() explicitly turns the sensor power on and then writes the 8 registers that are stored in taos_config. The first register in taos_config is the CONTROL register and the configuration is set to turn the power off. The existing state sequence in taos_chip_on() is: - Turn device power on - Turn device power off (via taos_config) - Configure other 7 registers (via taos_config) - Turn device power on, enable ADC This patch changes the code so that the device is not powered off via taos_config. Verified that the driver still functions correctly using a TSL2581 hooked up to a Raspberry Pi 2. Signed-off-by:
-
Brian Masney authored
in taos_defaults() The comments in taos_defaults() appear after the line of code that they apply to. This patch moves the comments so that they appear before the code. Some of the comments were updated to be more informative. Signed-off-by:
-
Brian Masney authored
taos_probe() queries the all of the sensor's registers and loads all of the values into a buffer stored on the stack. Only the chip ID register was actually used. Change the probe function to just query the chip ID register on the device. Verified that the driver still functions correctly using a TSL2581 hooked up to a Raspberry Pi 2. Signed-off-by:
-
Brian Masney authored
There were several places where the driver would first call i2c_smbus_write_byte() to select the register on the device, and then call i2c_smbus_read_byte() to get the contents of that register. The code would look roughly like: /* Select register */ i2c_smbus_write_byte(client, REGISTER); /* Read the the last register that was written to */ int data = i2c_smbus_read_byte(client); Rewrite this to use i2c_smbus_read_byte_data() to combine the two calls into one: int data = i2c_smbus_read_byte_data(chip->client, REGISTER); Verified that the driver still functions correctly using a TSL2581 hooked up to a Raspberry Pi 2. This fixes the following warnings that were found by the kbuild test robot that were introduced by commit 8ba355cce3c6 ("staging: iio: tsl2583: check for error code from i2c_smbus_read_byte()"). drivers/staging/iio/light/tsl2583.c:365:5-12: WARNING: Unsigned expression compared with zero: reg_val < 0 drivers/staging/iio/light/tsl2583.c:388:5-12: WARNING: Unsigned expression compared with zero: reg_val < 0 This also removes the need for the taos_i2c_read() function since all callers were only calling the function with a length of 1. Signed-off-by:
-
- 05 Nov, 2016 6 commits
-
-
Jonathan Cameron authored
A local branch created as Lee requested these two patches were applied in a fashion that would later let him merge the same branch into MFD if needed.
-
Mugunthan V N authored
This patch adds the required pieces to ti_am335x_adc driver for DMA support Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Mugunthan V N authored
store the physical address of the device in its priv to use it for DMA addressing in the client drivers. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Wenyou Yang authored
Add suspend/resume callback, support the pinctrl sleep state when the system suspend as well. Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Song Hongyan authored
Neither sample frequency value nor hysteresis value can be set to be a negative number, check and return "Invalid argument" if they are negative. If not do this change, sample_frequency will be set into some unknown value, read hysteresis value after write negative number will return "Invalid argument". Signed-off-by:
Song Hongyan <hongyan.song@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Eva Rachel Retuya authored
Rename regulator 'reg' to 'avdd' so as to be clear what regulator it stands for specifically. Additionally, get rid of local variable 'reg' and use direct assignment instead. Update also the goto label pertaining to the avdd regulator during disable. Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
