WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.

Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.

Watchdog tests have been successful with this patch with the following
systems:
  IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
  IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
  IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)

Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

This patch adds watchdog support for the ITE IT8659 watchdog.
IT8659 watchdog works in the same way as the other watchdogs supported
by it87_wdt.

Before this patch, IT8659 watchdog is not supported. After a modprobe,
dmesg reports:
  it87_wdt: Unknown Chip found, Chip 8659 Revision 0007

With this patch, modprobe it87_wdt recognizes the watchdog as the dmesg
output shows:
  it87_wdt: Chip IT8659 revision 7 initialized. timeout=60 sec (nowayout=0
  testmode=0)

Watchdog tests on a YANLING YL-ALP3L2C-1235U system have been successful,
the watchdog works as expected with this patch.
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-3-devlists@wefi.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Commit 893dc8b5 ("watchdog: it87: Drop support for resetting watchdog
though CIR and Game port") removed the try_gameport variable, and left
max_units setting redundant.

To clean up the code, this patch removes this redundant setting.
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-2-devlists@wefi.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

This patch fixes the following checkpatch.pl warning:

WARNING: Missing a blank line after declarations
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-1-devlists@wefi.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Add DT binding for Technologic Systems TS-72xx watchdog.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231212-ep93xx-v6-25-c307b8ac9aa8@maquefel.meSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Document DA9063 watchdog device as it is similar to DA9062 watchdog.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231210134717.94020-4-biju.das.jz@bp.renesas.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

The DA9061 watchdog is identical to DA9062 watchdog, so no driver changes
are required. The fallback compatible string "dlg,da9062-watchdog" will be
used on DA9061 watchdog.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231210134717.94020-3-biju.das.jz@bp.renesas.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.

On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.

Fixes: 2d63908b ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:

drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231122085118.177589-1-ben.dooks@codethink.co.ukSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Add support for watchdog and reset generator unit of the MediaTek
MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/c0cf5f701801cce60470853fa15f1d9dced78c4f.1700504385.git.daniel@makrotopia.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Add binding description for mediatek,mt7988-wdt.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/6478f8d2af59736d23a96b52891bb541de33870d.1700504385.git.daniel@makrotopia.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Convert txt file to yaml. Add maintainers from git blame.
Signed-off-by: Nik Bune <n2h9z4@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112162049.12633-1-n2h9z4@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.

Since 664a3923 ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.

This fix has been tested with watchdog-test from selftests.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374
Fixes: 664a3923 ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Remove the unused variable ilo5.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-4-jerry.hoemann@hpe.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

ProLiants of vintage to have an iLO 5, no longer send watchdog NMI
as an IO CHECK.  They are presented to hpwdt_pretimeout as NMI_UNKNOWN.
The preceding if statement rejects if !mynmi irrespective of value
of pretimeout making this if statement redundant.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-3-jerry.hoemann@hpe.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.

The code does this, but only for iLO5.

The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system.  Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK.  So the test is overly permissive and should
not be limited to only ilo5.

We need to enable this protection for future iLOs not matching the
current PCI IDs.

Fixes: 62290a5c ("watchdog: hpwdt: Claim NMIs generated by iLO5")
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-6-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-5-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-4-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.

The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:

	WARNING: modpost: drivers/watchdog/txx9wdt: section mismatch in reference: txx9wdt_driver+0x4 (section: .data) -> txx9wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-3-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.

The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:

	WARNING: modpost: drivers/watchdog/at91sam9_wdt: section mismatch in reference: at91wdt_driver+0x4 (section: .data) -> at91wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-2-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Commit bd888a43 ("dt-bindings: watchdog: da9062-wdt: convert txt to
yaml") converts da9062-wdt.txt to dlg,da9062-watchdog.yaml, but misses to
adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file pattern in DIALOG SEMICONDUCTOR DRIVERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106095349.9564-1-lukas.bulwahn@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered.

Update the example in the bindings.

Fixes: 7c631cdf ("dt-bindings: watchdog: qcom-wdt: allow interrupts")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106144335.v2.9.Ie30c1d3f780666f6906fd2fd7c437632c229d987@changeidSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.

This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.

The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.

Fixes: 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

amd-drm-next-6.7-2023-11-10:

amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: one Kconfig
  dependency fix and another fix for a long standing issue where a sync
  transfer races with system suspend"

* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix null dereference on suspend
  spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix broken cache-flush support for Micron eMMCs
   - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'

  MMC host:
   - sdhci_am654: Fix TAP value parsing for legacy speed mode
   - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
   - vub300: Fix an error path in probe"

* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
  mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
  Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
  mmc: vub300: fix an error code
  mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
  mmc: sdhci_am654: fix start loop index for TAP value parsing

Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "This contains two very small fixes that I failed to include in the
  main pull request"

* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix double shift bug
  pwm: samsung: Fix a bit test in pwm_samsung_resume()