- 30 Nov, 2017 33 commits
-
-
Takashi Iwai authored
commit d937cd67 upstream. When the usb-audio descriptor contains the malformed feature unit description with a too short length, the driver may access out-of-bounds. Add a sanity check of the header size at the beginning of parse_audio_feature_unit(). Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Henrik Eriksson authored
commit 20e3f985 upstream. commit 3179f620 ("ALSA: core: add .get_time_info") had a side effect of changing the behaviour of the PCM runtime tstamp. Prior to this change tstamp was not updated by snd_pcm_update_hw_ptr0() unless the hw_ptr had moved, after this change tstamp was always updated. For an application using alsa-lib, doing snd_pcm_readi() followed by snd_pcm_status() to estimate the age of the read samples by subtracting status->avail * [sample rate] from status->tstamp this change degraded the accuracy of the estimate on devices where the pcm hw does not provide a granular hw_ptr, e.g., devices using soc-generic-dmaengine-pcm.c and a dma-engine with residue_granularity DMA_RESIDUE_GRANULARITY_DESCRIPTOR. The accuracy of the estimate depended on the latency between the PCM hw completing a period and the driver called snd_pcm_period_elapsed() to notify ALSA core, typically determined by interrupt handling latency. After the change the accuracy of the estimate depended on the latency between the PCM hw completing a period and the application calling snd_pcm_status(), determined by the scheduling of the application process. The maximum error of the estimate is one period length in both cases, but the error average and variance is smaller when it depends on interrupt latency. Instead of always updating tstamp, update it only if audio_tstamp changed. Fixes: 3179f620 ("ALSA: core: add .get_time_info") Suggested-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Henrik Eriksson <henrik.eriksson@axis.com> Signed-off-by:
-
Theodore Ts'o authored
commit 51e3ae81 upstream. If there are pending writes subject to delayed allocation, then i_size will show size after the writes have completed, while i_disksize contains the value of i_size on the disk (since the writes have not been persisted to disk). If fallocate(2) is called with the FALLOC_FL_KEEP_SIZE flag, either with or without the FALLOC_FL_ZERO_RANGE flag set, and the new size after the fallocate(2) is between i_size and i_disksize, then after a crash, if a journal commit has resulted in the changes made by the fallocate() call to be persisted after a crash, but the delayed allocation write has not resolved itself, i_size would not be updated, and this would cause the following e2fsck complaint: Inode 12, end of extent exceeds allowed value (logical block 33, physical block 33441, len 7) This can only take place on a sparse file, where the fallocate(2) call is allocating blocks in a range which is before a pending delayed allocation write which is extending i_size. Since this situation is quite rare, and the window in which the crash must take place is typically < 30 seconds, in practice this condition will rarely happen. Nevertheless, it can be triggered in testing, and in particular by xfstests generic/456. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reported-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Rameshwar Prasad Sahu authored
commit f1601113 upstream. When tracing ata link error event, the kernel crashes when the disk is removed due to NULL pointer access by trace_ata_eh_link_autopsy API. This occurs as the dev is NULL when the disk disappeared. This patch fixes this crash by calling trace_ata_eh_link_autopsy only if "dev" is not NULL. v2 changes: Removed direct passing "link" pointer instead of "dev" in trace API. Signed-off-by:
Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 255c03d1 ("libata: Add tracepoints") Signed-off-by:
-
Arnd Bergmann authored
commit 3f2a162f upstream. We set rtlhal->last_suspend_sec to an uninitialized stack variable, but unfortunately gcc never warned about this, I only found it while working on another patch. I opened a gcc bug for this. Presumably the value of rtlhal->last_suspend_sec is not all that important, but it does get used, so we probably want the patch backported to stable kernels. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82839Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Larry Finger authored
commit 519ce2f9 upstream. In routine rtl92ee_set_fw_rsvdpagepkt(), the driver allocates an skb, but never calls rtl_cmd_send_packet(), which will free the buffer. All other rtlwifi drivers perform this operation correctly. This problem has been in the driver since it was included in the kernel. Fortunately, each firmware load only leaks 4 buffers, which likely explains why it has not previously been detected. Signed-off-by:
-
Andrew Elble authored
commit 95da1b3a upstream. If a delegation has been revoked by the server, operations using that delegation should error out with NFS4ERR_DELEG_REVOKED in the >4.1 case, and NFS4ERR_BAD_STATEID otherwise. The server needs NFSv4.1 clients to explicitly free revoked delegations. If the server returns NFS4ERR_DELEG_REVOKED, the client will do that; otherwise it may just forget about the delegation and be unable to recover when it later sees SEQ4_STATUS_RECALLABLE_STATE_REVOKED set on a SEQUENCE reply. That can cause the Linux 4.1 client to loop in its stage manager. Signed-off-by:
Andrew Elble <aweits@rit.edu> Reviewed-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit c05cefcc upstream. Before traversing a referral and performing a mount, the mounted-on directory looks strange: dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0 nfs4_get_referral is wiping out any cached attributes with what was returned via GETATTR(fs_locations), but the bit mask for that operation does not request any file attributes. Retrieve owner and timestamp information so that the memcpy in nfs4_get_referral fills in more attributes. Changes since v1: - Don't request attributes that the client unconditionally replaces - Request only MOUNTED_ON_FILEID or FILEID attribute, not both - encode_fs_locations() doesn't use the third bitmask word Fixes: 6b97fd3d ("NFSv4: Follow a referral") Suggested-by:
Pradeep Thomas <pradeepthomas@gmail.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Joshua Watt authored
commit f02fee22 upstream. The option was incorrectly masking off all other options. Signed-off-by:
Joshua Watt <JPEWhacker@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 34be4dbf upstream. isofs uses a 'char' variable to load the number of years since 1900 for an inode timestamp. On architectures that use a signed char type by default, this results in an invalid date for anything beyond 2027. This changes the function argument to a 'u8' array, which is defined the same way on all architectures, and unambiguously lets us use years until 2155. This should be backported to all kernels that might still be in use by that date. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Coly Li authored
commit 91af8300 upstream. In bcache code, sysfs entries are created before all resources get allocated, e.g. allocation thread of a cache set. There is posibility for NULL pointer deference if a resource is accessed but which is not initialized yet. Indeed Jorg Bornschein catches one on cache set allocation thread and gets a kernel oops. The reason for this bug is, when bch_bucket_alloc() is called during cache set registration and attaching, ca->alloc_thread is not properly allocated and initialized yet, call wake_up_process() on ca->alloc_thread triggers NULL pointer deference failure. A simple and fast fix is, before waking up ca->alloc_thread, checking whether it is allocated, and only wake up ca->alloc_thread when it is not NULL. Signed-off-by:
Coly Li <colyli@suse.de> Reported-by:
Jorg Bornschein <jb@capsec.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Dan Carpenter authored
commit db86be3a upstream. We're freeing the list iterator so we should be using the _safe() version of hlist_for_each_entry(). Fixes: 88b4a07e ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Andreas Rohner authored
commit 31ccb1f7 upstream. There is a race condition between nilfs_dirty_inode() and nilfs_set_file_dirty(). When a file is opened, nilfs_dirty_inode() is called to update the access timestamp in the inode. It calls __nilfs_mark_inode_dirty() in a separate transaction. __nilfs_mark_inode_dirty() caches the ifile buffer_head in the i_bh field of the inode info structure and marks it as dirty. After some data was written to the file in another transaction, the function nilfs_set_file_dirty() is called, which adds the inode to the ns_dirty_files list. Then the segment construction calls nilfs_segctor_collect_dirty_files(), which goes through the ns_dirty_files list and checks the i_bh field. If there is a cached buffer_head in i_bh it is not marked as dirty again. Since nilfs_dirty_inode() and nilfs_set_file_dirty() use separate transactions, it is possible that a segment construction that writes out the ifile occurs in-between the two. If this happens the inode is not on the ns_dirty_files list, but its ifile block is still marked as dirty and written out. In the next segment construction, the data for the file is written out and nilfs_bmap_propagate() updates the b-tree. Eventually the bmap root is written into the i_bh block, which is not dirty, because it was written out in another segment construction. As a result the bmap update can be lost, which leads to file system corruption. Either the virtual block address points to an unallocated DAT block, or the DAT entry will be reused for something different. The error can remain undetected for a long time. A typical error message would be one of the "bad btree" errors or a warning that a DAT entry could not be found. This bug can be reproduced reliably by a simple benchmark that creates and overwrites millions of 4k files. Link: http://lkml.kernel.org/r/1509367935-3086-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
NeilBrown authored
commit ecc0c469 upstream. Currently if the autofs kernel module gets an error when writing to the pipe which links to the daemon, then it marks the whole moutpoint as catatonic, and it will stop working. It is possible that the error is transient. This can happen if the daemon is slow and more than 16 requests queue up. If a subsequent process tries to queue a request, and is then signalled, the write to the pipe will return -ERESTARTSYS and autofs will take that as total failure. So change the code to assess -ERESTARTSYS and -ENOMEM as transient failures which only abort the current request, not the whole mountpoint. It isn't a crash or a data corruption, but having autofs mountpoints suddenly stop working is rather inconvenient. Ian said: : And given the problems with a half dozen (or so) user space applications : consuming large amounts of CPU under heavy mount and umount activity this : could happen more easily than we expect. Link: http://lkml.kernel.org/r/87y3norvgp.fsf@notabene.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Mirko Parthey authored
commit 56a46acf upstream. The WLAN LED on the Linksys WRT54GSv1 is active low, but the software treats it as active high. Fix the inverted logic. Fixes: 7bb26b16 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0") Signed-off-by:
Mirko Parthey <mirko.parthey@web.de> Looks-ok-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16071/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
commit 547da673 upstream. Fix a commit 7aeb753b ("MIPS: Implement task_user_regset_view.") regression, then activated by commit 6a9c001b ("MIPS: Switch ELF core dumper to use regsets.)", that caused n32 processes to dump o32 core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file header's `e_flags' member: $ file tls-core tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...] $ ./tls-core Aborted (core dumped) $ file core core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style $ Previously the flag was set as the result of a: statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the `->e_flags' member of the regset view chosen is. We have the views defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64 one, and the latter is used for n32 as well. Consequently an o32 core file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class is chosen elsewhere, and the 32-bit one is correctly selected for n32). Correct the issue then by defining an n32 regset view and using it as appropriate. Issue discovered in GDB testing. Fixes: 7aeb753b ("MIPS: Implement task_user_regset_view.") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Djordje Todorovic <djordje.todorovic@rt-rk.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17617/Signed-off-by:
-
Hou Tao authored
commit b9a41d21 upstream. The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 74d4108d upstream. The default max_cache_size_bytes for dm-bufio is meant to be the lesser of 25% of the size of the vmalloc area and 2% of the size of lowmem. However, on 32-bit systems the intermediate result in the expression (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100 overflows, causing the wrong result to be computed. For example, on a 32-bit system where the vmalloc area is 520093696 bytes, the result is 1174405 rather than the expected 130023424, which makes the maximum cache size much too small (far less than 2% of lowmem). This causes severe performance problems for dm-verity users on affected systems. Fix this by using mult_frac() to correctly multiply by a percentage. Do this for all places in dm-bufio that multiply by a percentage. Also replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary to the comment is now defined in include/linux/vmalloc.h. Depends-on: 9993bc63 ("sched/x86: Fix overflow in cyc2ns_offset") Fixes: 95d402f0 ("dm: add bufio") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Vijendar Mukunda authored
commit 9ceace3c upstream. This commit adds PCI ID for Raven platform Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by:
-
Mathias Kresin authored
commit 05a67cc2 upstream. There is a typo inside the pinmux setup code. The function is called refclk and not reclk. Fixes: 53263a1c ("MIPS: ralink: add mt7628an support") Signed-off-by:
Mathias Kresin <dev@kresin.me> Acked-by:
John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16047/Signed-off-by:
-
Mathias Kresin authored
commit 8ef4b43c upstream. According to the datasheet the REFCLK pin is shared with GPIO#37 and the PERST pin is shared with GPIO#36. Fixes: 53263a1c ("MIPS: ralink: add mt7628an support") Signed-off-by:
-
Philip Derrin authored
commit 3b0c0c92 upstream. When CONFIG_ARM_LPAE is set, the PMD dump relies on the software read-only bit to determine whether a page is writable. This concealed a bug which left the kernel text section writable (AP2=0) while marked read-only in the software bit. In a kernel with the AP2 bug, the dump looks like this: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M ro x SHD 0xc0600000-0xc0800000 2M ro NX SHD 0xc0800000-0xc4800000 64M RW NX SHD The fix is to check that the software and hardware bits are both set before displaying "ro". The dump then shows the true perms: ---[ Kernel Mapping ]--- 0xc0000000-0xc0200000 2M RW NX SHD 0xc0200000-0xc0600000 4M RW x SHD 0xc0600000-0xc0800000 2M RW NX SHD 0xc0800000-0xc4800000 64M RW NX SHD Fixes: ded94779 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE") Signed-off-by:
Philip Derrin <philip@cog.systems> Tested-by:
Neil Dick <neil@cog.systems> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Philip Derrin authored
commit 400eeffa upstream. Currently, for ARM kernels with CONFIG_ARM_LPAE and CONFIG_STRICT_KERNEL_RWX enabled, the 2MiB pages mapping the kernel code and rodata are writable. They are marked read-only in a software bit (L_PMD_SECT_RDONLY) but the hardware read-only bit is not set (PMD_SECT_AP2). For user mappings, the logic that propagates the software bit to the hardware bit is in set_pmd_at(); but for the kernel, section_update() writes the PMDs directly, skipping this logic. The fix is to set PMD_SECT_AP2 for read-only sections in section_update(), at the same time as L_PMD_SECT_RDONLY. Fixes: 1e347922 ("ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error") Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
-
Masami Hiramatsu authored
commit 12a78d43 upstream. The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at <jump_table>:ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Biggers authored
commit 1d9ddde1 upstream. On a non-preemptible kernel, if KEYCTL_DH_COMPUTE is called with the largest permitted inputs (16384 bits), the kernel spends 10+ seconds doing modular exponentiation in mpi_powm() without rescheduling. If all threads do it, it locks up the system. Moreover, it can cause rcu_sched-stall warnings. Notwithstanding the insanity of doing this calculation in kernel mode rather than in userspace, fix it by calling cond_resched() as each bit from the exponent is processed. It's still noninterruptible, but at least it's preemptible now. Do the cond_resched() once per bit rather than once per MPI limb because each limb might still easily take 100+ milliseconds on slow CPUs. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paul E. McKenney authored
commit 7c2102e5 upstream. The current implementation of synchronize_sched_expedited() incorrectly assumes that resched_cpu() is unconditional, which it is not. This means that synchronize_sched_expedited() can hang when resched_cpu()'s trylock fails as follows (analysis by Neeraj Upadhyay): o CPU1 is waiting for expedited wait to complete: sync_rcu_exp_select_cpus rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5 IPI sent to CPU5 synchronize_sched_expedited_wait ret = swait_event_timeout(rsp->expedited_wq, sync_rcu_preempt_exp_done(rnp_root), jiffies_stall); expmask = 0x20, CPU 5 in idle path (in cpuidle_enter()) o CPU5 handles IPI and fails to acquire rq lock. Handles IPI sync_sched_exp_handler resched_cpu returns while failing to try lock acquire rq->lock need_resched is not set o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to idle (schedule() is not called). o CPU 1 reports RCU stall. Given that resched_cpu() is now used only by RCU, this commit fixes the assumption by making resched_cpu() unconditional. Reported-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
WANG Cong authored
commit 499fde66 upstream. As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f ("net: fix sleeping for sk_wait_event()"). Reported-by:
Michal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: "Jorgen S. Hansen" <jhansen@vmware.com> Signed-off-by:
-
Claudio Imbrenda authored
commit f7f9b5e7 upstream. When a thread is prepared for waiting by calling prepare_to_wait, sleeping is not allowed until either the wait has taken place or finish_wait has been called. The existing code in af_vsock imposed unnecessary no-sleep assumptions to a broad list of backend functions. This patch shrinks the influence of prepare_to_wait to the area where it is strictly needed, therefore relaxing the no-sleep restriction there. Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
-
WANG Cong authored
commit 76da0704 upstream. In commit 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by:
jeffy <jeffy.chen@rock-chips.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Vasily Gorbik authored
commit b192571d upstream. Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody". Also replaces 8 spaces with a single tab to reduce the memory footprint. Fixes the following KASAN finding: BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538 Write of size 1 at addr 000000005a4a75a0 by task bash/1282 CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Call Trace: ([<000000000011eeb6>] show_stack+0x56/0x88) [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0 [<00000000004e2994>] print_address_description+0xf4/0x288 [<00000000004e2cf2>] kasan_report+0x13a/0x230 [<0000000000e38ae6>] number+0x3fe/0x538 [<0000000000e3dfe4>] vsnprintf+0x194/0x948 [<0000000000e3ea42>] sprintf+0xa2/0xb8 [<00000000001198dc>] print_insn+0x374/0x500 [<0000000000119346>] show_code+0x4ee/0x538 [<000000000011f234>] show_registers+0x34c/0x388 [<000000000011f2ae>] show_regs+0x3e/0xa8 [<000000000011f502>] die+0x1ea/0x2e8 [<0000000000138f0e>] do_no_context+0x106/0x168 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0 [<000000000090639e>] sysrq_handle_crash+0x46/0x58 ([<0000000000000007>] 0x7) [<00000000009073fa>] __handle_sysrq+0x102/0x218 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100 [<000000000061d67a>] proc_reg_write+0xb2/0x128 [<0000000000520be6>] __vfs_write+0xee/0x368 [<0000000000521222>] vfs_write+0x21a/0x278 [<000000000052156a>] SyS_write+0xda/0x178 [<0000000000e555cc>] system_call+0xc4/0x270 The buggy address belongs to the page: page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00 >000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 ^ 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00 ================================================================== Signed-off-by:
Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 5c505387 upstream. The e7 opcode table does not have an end marker. Hence when trying to find an unknown e7 instruction the code will access memory behind the table until it finds something that matches the opcode, or the kernel crashes, whatever comes first. This affects not only the in-kernel disassembler but also uprobes and kprobes which refuse to set a probe on unknown instructions, and therefore search the opcode tables to figure out if instructions are known or not. Fixes: 3585cb02 ("s390/disassembler: add vector instructions") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit d6e646ad upstream. For PREEMPT enabled kernels the runtime instrumentation (RI) code contains a possible use-after-free bug. If a task that makes use of RI exits, it will execute do_exit() while still enabled for preemption. That function will call exit_thread_runtime_instr() via exit_thread(). If exit_thread_runtime_instr() gets preempted after the RI control block of the task has been freed but before the pointer to it is set to NULL, then save_ri_cb(), called from switch_to(), will write to already freed memory. Avoid this and simply disable preemption while freeing the control block and setting the pointer to NULL. Fixes: e4b8b3f3 ("s390: add support for runtime instrumentation") Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit a1c5befc upstream. Dan Horák reported the following crash related to transactional execution: User process fault: interruption code 0013 ilc:3 in libpthread-2.26.so[3ff93c00000+1b000] CPU: 2 PID: 1 Comm: /init Not tainted 4.13.4-300.fc27.s390x #1 Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) task: 00000000fafc8000 task.stack: 00000000fafc4000 User PSW : 0705200180000000 000003ff93c14e70 R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 RI:0 EA:3 User GPRS: 0000000000000077 000003ff00000000 000003ff93144d48 000003ff93144d5e 0000000000000000 0000000000000002 0000000000000000 000003ff00000000 0000000000000000 0000000000000418 0000000000000000 000003ffcc9fe770 000003ff93d28f50 000003ff9310acf0 000003ff92b0319a 000003ffcc9fe6d0 User Code: 000003ff93c14e62: 60e0b030 std %f14,48(%r11) 000003ff93c14e66: 60f0b038 std %f15,56(%r11) #000003ff93c14e6a: e5600000ff0e tbegin 0,65294 >000003ff93c14e70: a7740006 brc 7,3ff93c14e7c 000003ff93c14e74: a7080000 lhi %r0,0 000003ff93c14e78: a7f40023 brc 15,3ff93c14ebe 000003ff93c14e7c: b2220000 ipm %r0 000003ff93c14e80: 8800001c srl %r0,28 There are several bugs with control register handling with respect to transactional execution: - on task switch update_per_regs() is only called if the next task has an mm (is not a kernel thread). This however is incorrect. This breaks e.g. for user mode helper handling, where the kernel creates a kernel thread and then execve's a user space program. Control register contents related to transactional execution won't be updated on execve. If the previous task ran with transactional execution disabled then the new task will also run with transactional execution disabled, which is incorrect. Therefore call update_per_regs() unconditionally within switch_to(). - on startup the transactional execution facility is not enabled for the idle thread. This is not really a bug, but an inconsistency to other facilities. Therefore enable the facility if it is available. - on fork the new thread's per_flags field is not cleared. This means that a child process inherits the PER_FLAG_NO_TE flag. This flag can be set with a ptrace request to disable transactional execution for the current process. It should not be inherited by new child processes in order to be consistent with the handling of all other PER related debugging options. Therefore clear the per_flags field in copy_thread_tls(). Reported-and-tested-by:
Dan Horák <dan@danny.cz> Fixes: d35339a4 ("s390: add support for transactional memory") Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
- 24 Nov, 2017 7 commits
-
-
Greg Kroah-Hartman authored
-
Michal Hocko authored
Backport of the upstream commit f86e4271 ("mm: check the return value of lookup_page_ext for all call sites") is wrong for hwpoison pages. I have accidentally negated the condition for bailout. This basically disables hwpoison pages tracking while the code still might crash on unusual configurations when struct pages do not have page_ext allocated. The fix is trivial to invert the condition. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Jann Horn authored
commit 373c4557 upstream. This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Changed for 4.4/4.9 stable backport: - fix up conflict in the huge_pte_offset() call Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Jaewon Kim authored
commit e492080e upstream. online_page_ext() and page_ext_init() allocate page_ext for each section, but they do not allocate if the first PFN is !pfn_present(pfn) or !pfn_valid(pfn). Then section->page_ext remains as NULL. lookup_page_ext checks NULL only if CONFIG_DEBUG_VM is enabled. For a valid PFN, __set_page_owner will try to get page_ext through lookup_page_ext. Without CONFIG_DEBUG_VM lookup_page_ext will misuse NULL pointer as value 0. This incurrs invalid address access. This is the panic example when PFN 0x100000 is not valid but PFN 0x13FC00 is being used for page_ext. section->page_ext is NULL, get_entry returned invalid page_ext address as 0x1DFA000 for a PFN 0x13FC00. To avoid this panic, CONFIG_DEBUG_VM should be removed so that page_ext will be checked at all times. Unable to handle kernel paging request at virtual address 01dfa014 ------------[ cut here ]------------ Kernel BUG at ffffff80082371e0 [verbose debug info unavailable] Internal error: Oops: 96000045 [#1] PREEMPT SMP Modules linked in: PC is at __set_page_owner+0x48/0x78 LR is at __set_page_owner+0x44/0x78 __set_page_owner+0x48/0x78 get_page_from_freelist+0x880/0x8e8 __alloc_pages_nodemask+0x14c/0xc48 __do_page_cache_readahead+0xdc/0x264 filemap_fault+0x2ac/0x550 ext4_filemap_fault+0x3c/0x58 __do_fault+0x80/0x120 handle_mm_fault+0x704/0xbb0 do_page_fault+0x2e8/0x394 do_mem_abort+0x88/0x124 Pre-4.7 kernels also need commit f86e4271 ("mm: check the return value of lookup_page_ext for all call sites"). Link: http://lkml.kernel.org/r/20171107094131.14621-1-jaewon31.kim@samsung.com Fixes: eefa864b ("mm/page_ext: resurrect struct page extending code for debugging") Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Acked-by:
-
Yang Shi authored
commit f86e4271 upstream. Per the discussion with Joonsoo Kim [1], we need check the return value of lookup_page_ext() for all call sites since it might return NULL in some cases, although it is unlikely, i.e. memory hotplug. Tested with ltp with "page_owner=0". [1] http://lkml.kernel.org/r/20160519002809.GA10245@js1304-P5Q-DELUXE [akpm@linux-foundation.org: fix build-breaking typos] [arnd@arndb.de: fix build problems from lookup_page_ext] Link: http://lkml.kernel.org/r/6285269.2CksypHdYp@wuerfel [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1464023768-31025-1-git-send-email-yang.shi@linaro.orgSigned-off-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
-
Jan Harkes authored
commit d337b66a upstream. When an application called fsync on a file in Coda a small request with just the file identifier was allocated, but the declared length was set to the size of union of all possible upcall requests. This bug has been around for a very long time and is now caught by the extra checking in usercopy that was introduced in Linux-4.8. The exposure happens when the Coda cache manager process reads the fsync upcall request at which point it is killed. As a result there is nobody servicing any further upcalls, trapping any processes that try to access the mounted Coda filesystem. Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
