Make the gpiolib-cdev module a build option.  This allows the CDEV
interface to be removed from the kernel to reduce kernel size in
applications where is it not required, and provides the parent for
other CDEV interface specific build options to follow.
Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add a new version of the uAPI to address existing 32/64-bit alignment
issues, add support for debounce and event sequence numbers, allow
requested lines with different configurations, and provide some future
proofing by adding padding reserved for future use.

The alignment issue relates to the gpioevent_data, which packs to different
sizes on 32-bit and 64-bit platforms. That creates problems for 32-bit apps
running on 64-bit kernels.  uAPI v2 addresses that particular issue, and
the problem more generally, by adding pad fields that explicitly pad
structs out to 64-bit boundaries, so they will pack to the same size now,
and even if some of the reserved padding is used for __u64 fields in the
future.

The new structs have been analysed with pahole to ensure that they
are sized as expected and contain no implicit padding.

The lack of future proofing in v1 makes it impossible to, for example,
add the debounce feature that is included in v2.
The future proofing is addressed by providing configurable attributes in
line config and reserved padding in all structs for future features.
Specifically, the line request, config, info, info_changed and event
structs receive updated versions and new ioctls.

As the majority of the structs and ioctls were being replaced, it is
opportune to rework some of the other aspects of the uAPI:

v1 has three different flags fields, each with their own separate
bit definitions.  In v2 that is collapsed to one - gpio_v2_line_flag.

The handle and event requests are merged into a single request, the line
request, as the two requests were mostly the same other than the edge
detection provided by event requests.  As a byproduct, the v2 uAPI allows
for multiple lines producing edge events on the same line handle.
This is a new capability as v1 only supports a single line in an event
request.

As a consequence, there are now only two types of file handle to be
concerned with, the chip and the line, and it is clearer which ioctls
apply to which type of handle.

There is also some minor renaming of fields for consistency compared to
their v1 counterparts, e.g. offset rather than lineoffset or line_offset,
and consumer rather than consumer_label.

Additionally, v1 GPIOHANDLES_MAX becomes GPIO_V2_LINES_MAX in v2 for
clarity, and the gpiohandle_data __u8 array becomes a bitmap in
gpio_v2_line_values.

The v2 uAPI is mostly a reorganisation and extension of v1, so userspace
code, particularly libgpiod, should readily port to it.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Replace constant array sizes with a macro constant to clarify the source
of array sizes, provide a place to document any constraints on the size,
and to simplify array sizing in userspace if constructing structs
from their composite fields.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Replace usage of strncpy() with strscpy() to remove -Wstringop-truncation
warnings.

The structures being populated are zeroed, to prevent stack leakage as
they are returned to userspace, so strscpy() performs the equivalent
function without the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Set the value of the line info offset in gpio_desc_to_lineinfo(), rather
than relying on it being passed in the info.  This makes the function
behave as you would expect from the name - it generates the line info
corresponding to a given GPIO desc.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Let's move the code preparing the device properties into a separate
routine. This has the advantage of simplifying the error handling and
makes the indentation less deep.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

GPIO line names are currently created by the driver from the chip label.
We'll want to support custom formats for line names (for instance: to
name all lines the same) for user-space tests so create them in the
module init function and pass them to the driver using the standard
'gpio-line-names' property.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

While we do check the "chip-name" property in probe(), we never actually
use it. Let's pass the chip label to the driver using device properties
as we'll want to allow users to define their own once dynamically
created chips are supported.

The property is renamed to "chip-label" to not cause any confusion with
the actual chip name which is of the form: "gpiochipX".

If the "chip-label" property is missing, let's do what most devices in
drivers/gpio/ do and use dev_name().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The driver actually supports 4 properties but we only ever set up up to
three. This will change however in upcoming patches so increase the
number of really (as in: the number the property array can hold)
supported properties to 4.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There's a return; at the end of a void function. This is not needed so
remove it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

We don't need a custom logging helper. Let's use the standard pr_fmt()
macro which allows us to use all pr_*() routines with custom format.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Drop the definition for the driver name. Let's use KBUILD_MODNAME for
the log format and use the "gpio-mockup" value directly in the only
place where it's relevant: in the name of the device.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This module doesn't need gpio/consumer.h - it's a provider. It also
doesn't use any symbols from init.h so let's remove both includes.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There's some documentation for gpio-mockup's debugfs interface in the
driver's source but it's not much. Add proper documentation for this
testing module.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There's a common pattern of dynamically allocating an array of char
pointers and then also dynamically allocating each string in this
array. Provide a helper for freeing such a string array with one call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some Layerscape/QoriQ SoCs have input buffers which needs to be enabled
first. This was done in two different ways in the driver. Unify it.

This was tested on a LS1028A SoC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

If the module init function fails after creating the debugs directory,
it's never removed. Add proper cleanup calls to avoid this resource
leak.

Fixes: 9202ba23 ("gpio: mockup: implement event injecting over debugfs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Change config to tristate, add module device table, module author,
description and license to support module build for i.MX GPIO driver.

As this is a SoC GPIO module, it provides common functions for most
of the peripheral devices, such as GPIO pins control, secondary
interrupt controller for GPIO pins IRQ etc., without GPIO driver, most
of the peripheral devices will NOT work properly, so GPIO module is
similar with clock, pinctrl driver that should be loaded ONCE and
never unloaded.

Since MXC GPIO driver needs to have init function to register syscore
ops once, here still use subsys_initcall(), NOT module_platform_driver().
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1600320829-1453-1-git-send-email-Anson.Huang@nxp.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

When PINCTRL_BCM2835 is enabled and GPIOLIB is disabled, it results in the
following Kbuild warning:

WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
  Depends on [n]: GPIOLIB [=n]
  Selected by [y]:
  - PINCTRL_BCM2835 [=y] && PINCTRL [=y] && OF [=y] && (ARCH_BCM2835 [=n] || ARCH_BRCMSTB [=n] || COMPILE_TEST [=y])

The reason is that PINCTRL_BCM2835 selects GPIOLIB_IRQCHIP without
depending on or selecting GPIOLIB while GPIOLIB_IRQCHIP is subordinate to
GPIOLIB.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: 85ae9e51 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200914144025.371370-1-fazilyildiran@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert the Maxim MAX732x family of GPIO expanders bindings to device
tree schema by merging it with existing PCA95xx schema.  These are quite
similar so merging reduces duplication.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-3-krzk@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert the NXP PCA953x family of GPIO expanders bindings to device tree
schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-2-krzk@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Describe common "gpio-line-names" property to fix dtbs_check warnings
like:

  arch/arm/boot/dts/imx53-m53menlo.dt.yaml: gpio@53f84000:
    'gpio-line-names' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920195848.27075-3-krzk@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Several DTSes with ARMv6 and ARMv7 i.MX SoCs introduce their own
compatibles so add them to fix dtbs_check warnings like:

  arch/arm/boot/dts/imx35-pdk.dt.yaml: gpio@53fa4000:
    compatible: ['fsl,imx35-gpio', 'fsl,imx31-gpio'] is not valid under any of the given schemas

  arch/arm/boot/dts/imx51-babbage.dt.yaml: gpio@73f90000:
    compatible: ['fsl,imx51-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920195848.27075-2-krzk@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Describe common "gpio-line-names" property to fix dtbs_check warnings
like:

  arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dt.yaml: gpio@e8a0b000:
    'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200920195848.27075-1-krzk@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-updates-for-v5.10-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio updates for v5.10 - part 1

- automatically drive GPHY leds in gpio-stp-xway
- refactor ->{get, set}_multiple() in gpio-aggregator
- add support for a new model in rcar-gpio DT bindings
- simplify several GPIO drivers with dev_err_probe()
- disable Direct KBD interrupts in gpio-tc35894
- use DEFINE_SEQ_ATTRIBUTE() in GPIO chardev to shrink code
- switch to using a simpler IDA API in gpiolib
- make devprop_gpiochip_set_names() more generic by using device properties
  instead of using fwnode helpers

It's possible for a GPIO chip to not have a parent device (whose
properties we inspect for 'gpio-line-names'). In this case we should
simply return from devprop_gpiochip_set_names(). Add an appropriate
check for this use-case.

Fixes: 7cba1a4d ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Now that devprop_gpiochip_set_names() is only used in a single place
inside drivers/gpio/gpiolib.c, there's no need anymore for it to be
exported or to even live in its own source file. Pull this function into
the core source file for gpiolib.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

devprop_gpiochip_set_names() is overly complicated with taking the
fwnode argument (which requires using dev_fwnode() & of_fwnode_handle()
in ACPI and OF GPIO code respectively). Let's just switch to using the
generic device properties.

This allows us to pull the code setting line names directly into
gpiochip_add_data_with_key() instead of handling it separately for
ACPI and OF.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Instead of doing the following:

    count = device_property_read_string_array(dev, propname, NULL, 0);

Let's provide inline helpers with hardcoded arguments for counting
strings in property arrays.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

NXP i.MX GPIO bindings for v5.10

Few NXP i.MX GPIO controller bindings cleanup.

Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

On tc35894, have to disable direct keypad interrupts to make
it as general purpose interrupts functionality work.
if not, after chip reset, IRQST(0x91) will always 0x20,
IRQN always low level, can't be clear.

Configure DIRECTx to enable general purpose gpio mode,
else read GPIOMISx register always zero in irq routine.

verified on tc35894, need more test on other tc3589x.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Parse also optional power-domains property to fix dtbs_check warnings
like:

  arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml: gpio@5d080000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-5-krzk@kernel.org

Allow parsing GPIO controller children nodes with GPIO hogs to fix
warning:

  arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpio@30240000: 'wl-reg-on' does not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-4-krzk@kernel.org

The GPIO controller node can have gpio-ranges property.  This fixes
dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000: 'gpio-ranges' does not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-3-krzk@kernel.org

DTSes with new i.MX 8 SoCs introduce their own compatibles so add them
to fix dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
    compatible:0: 'fsl,imx8mm-gpio' is not one of ['fsl,imx1-gpio', 'fsl,imx21-gpio', 'fsl,imx31-gpio', 'fsl,imx35-gpio', 'fsl,imx7d-gpio']
    From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml

  arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
    compatible: ['fsl,imx8mm-gpio', 'fsl,imx35-gpio'] is too long

  arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio@30200000:
    compatible: Additional items are not allowed ('fsl,imx35-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200825193536.7332-2-krzk@kernel.org

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>