- 06 Mar, 2013 13 commits
-
-
Bjørn Mork authored
commit f8f0302b upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Igor Grinberg authored
commit d107a204 upstream. The Chip Select Configuration Register must be programmed to 0x2 in order to achieve the correct behavior of the Static Memory Controller. Without this patch devices wired to DFI and accessed through SMC cannot be accessed after resume from S2. Do not rely on the boot loader to program the CSMSADRCFG register by programming it in the kernel smemc module. Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
-
John David Anglin authored
commit 7139bc15 upstream. This patch goes a long way toward fixing the minifail bug, and it significantly improves the stability of SMP machines such as the rp3440. When write protecting a page for COW, we need to purge the existing translation. Otherwise, the COW break doesn't occur as expected because the TLB may still have a stale entry which allows writes. [jejb: fix up checkpatch errors] Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Jean Delvare authored
commit 811af972 upstream. It doesn't seem this spinlock was properly initialized. This bug was introduced by commit 7a410e8d. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Theodore Ts'o authored
commit 860d21e2 upstream. The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So ENOMEM is more appropriate than EIO. In addition, make sure that the file system is marked as being inconsistent if sb_getblk() fails. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> [bwh: Backported to 3.2: - Adjust context - Drop change to inline.c - Call to ext4_ext_check() from ext4_ext_find_extent() is conditional] Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 6a040ce7 upstream. The DDW code uses a eeh_dev struct from the pci_dev. However, this is not set until eeh_add_device_late is called. Since pci_bus_add_devices is called before eeh_add_device_late, the PCI devices are added to the bus, making drivers' probe hooks to be called. These will call set_dma_mask, which will call the DDW code, which will require the eeh_dev struct from pci_dev. This would result in a crash, due to a NULL dereference. Calling eeh_add_device_late after pci_bus_add_devices would make the system BUG, because device files shouldn't be added to devices there were not added to the system. So, a new function is needed to add such files only after pci_bus_add_devices have been called. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Maciej Sosnowski authored
commit c419fcfd upstream. When providers get blocked unregister_dca_providers() is called ending up with dca_providers and dca_domain lists emptied. Dca should be prevented from trying to unregister any provider if dca_domain list is found empty. Reported-by:
Jiang Liu <jiang.liu@huawei.com> Tested-by:
Gaohuai Han <hangaohuai@huawei.com> Signed-off-by:
Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by:
Dan Williams <djbw@fb.com> Signed-off-by:
-
Al Viro authored
commit 55ee64b3 upstream. Walking rbtree while it's modified is a Bad Idea(tm); besides, the result of find_vma() can be freed just as it's getting returned to caller. Fortunately, it's easy to fix - just take ->mmap_sem a bit earlier (and don't bother with find_vma() at all if virtp >= PAGE_OFFSET - in that case we don't even look at its result). While we are at it, what prevents VIDIOC_PREPARE_BUF calling v4l_prepare_buf() -> (e.g) vb2_ioctl_prepare_buf() -> vb2_prepare_buf() -> __buf_prepare() -> __qbuf_userptr() -> vb2_vmalloc_get_userptr() -> find_vma(), AFAICS without having taken ->mmap_sem anywhere in process? The code flow is bloody convoluted and depends on a bunch of things done by initialization, so I certainly might've missed something... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <archit@ti.com> Cc: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Laurent Pinchart authored
commit 317efce9 upstream. When subdev registration fails the subdev v4l2_dev field is left to a non-NULL value. Later calls to v4l2_device_unregister_subdev() will consider the subdev as registered and will module_put() the subdev module without any matching module_get(). Fix this by setting the subdev v4l2_dev field to NULL in v4l2_device_register_subdev() when the function fails. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Tejun Heo authored
commit a2c1c57b upstream. To avoid executing the same work item concurrenlty, workqueue hashes currently busy workers according to their current work items and looks up the the table when it wants to execute a new work item. If there already is a worker which is executing the new work item, the new item is queued to the found worker so that it gets executed only after the current execution finishes. Unfortunately, a work item may be freed while being executed and thus recycled for different purposes. If it gets recycled for a different work item and queued while the previous execution is still in progress, workqueue may make the new work item wait for the old one although the two aren't really related in any way. In extreme cases, this false dependency may lead to deadlock although it's extremely unlikely given that there aren't too many self-freeing work item users and they usually don't wait for other work items. To alleviate the problem, record the current work function in each busy worker and match it together with the work item address in find_worker_executing_work(). While this isn't complete, it ensures that unrelated work items don't interact with each other and in the very unlikely case where a twisted wq user triggers it, it's always onto itself making the culprit easy to spot. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andrey Isakov <andy51@gmx.ru> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701 [bwh: Backported to 3.2: - Adjust context - Incorporate earlier logging cleanup in process_one_work() from 044c782c ('workqueue: fix checkpatch issues')] Signed-off-by:
-
Cornelia Huck authored
commit 55c171a6 upstream. Running under a kvm host does not necessarily imply the presence of a page mapped above the main memory with the virtio information; however, the code includes a hard coded access to that page. Instead, check for the presence of the page and exit gracefully before we hit an addressing exception if it does not exist. Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit e716efde upstream. commit 52553ddf(genirq: fix regression in irqfixup, irqpoll) introduced a potential deadlock by calling the action handler with the irq descriptor lock held. Remove the call and let the handling code run even for an interrupt where only a single action is registered. That matches the goal of the above commit and avoids the deadlock. Document the confusing action = desc->action reload in the handling loop while at it. Reported-and-tested-by:
"Wang, Warner" <warner.wang@hp.com> Tested-by:
Edward Donovan <edward.donovan@numble.net> Cc: "Wang, Song-Bo (Stoney)" <song-bo.wang@hp.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
David S. Miller authored
[ Upstream commit f4d96054 ] The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by:
Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 20 Feb, 2013 27 commits
-
-
Ben Hutchings authored
-
Jan Beulich authored
commit 13d2b4d1 upstream. This fixes CVE-2013-0228 / XSA-42 Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user in 32bit PV guest can use to crash the > guest with the panic like this: ------------- general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/vbd-51712/block/xvda/dev Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4 mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1 EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0 EIP is at xen_iret+0x12/0x2b EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010 ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0 DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069 Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000) Stack: 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000 Call Trace: Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00 8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40 10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02 EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0 general protection fault: 0000 [#2] ---[ end trace ab0d29a492dcd330 ]--- Kernel panic - not syncing: Fatal exception Pid: 1250, comm: r Tainted: G D --------------- 2.6.32-356.el6.i686 #1 Call Trace: [<c08476df>] ? panic+0x6e/0x122 [<c084b63c>] ? oops_end+0xbc/0xd0 [<c084b260>] ? do_general_protection+0x0/0x210 [<c084a9b7>] ? error_code+0x73/ ------------- Petr says: " I've analysed the bug and I think that xen_iret() cannot cope with mangled DS, in this case zeroed out (null selector/descriptor) by either xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT entry was invalidated by the reproducer. " Jan took a look at the preliminary patch and came up a fix that solves this problem: "This code gets called after all registers other than those handled by IRET got already restored, hence a null selector in %ds or a non-null one that got loaded from a code or read-only data descriptor would cause a kernel mode fault (with the potential of crashing the kernel as a whole, if panic_on_oops is set)." The way to fix this is to realize that the we can only relay on the registers that IRET restores. The two that are guaranteed are the %cs and %ss as they are always fixed GDT selectors. Also they are inaccessible from user mode - so they cannot be altered. This is the approach taken in this patch. Another alternative option suggested by Jan would be to relay on the subtle realization that using the %ebp or %esp relative references uses the %ss segment. In which case we could switch from using %eax to %ebp and would not need the %ss over-rides. That would also require one extra instruction to compensate for the one place where the register is used as scaled index. However Andrew pointed out that is too subtle and if further work was to be done in this code-path it could escape folks attention and lead to accidents. Reviewed-by:
Petr Matousek <pmatouse@redhat.com> Reported-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Nithin Nayak Sujir authored
[ Upstream commit daf3ec68 ] TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Nithin Nayak Sujir authored
[ Upstream commit 9c13cb8b ] When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by:
-
Sarveshwar Bandi authored
[ Upstream commit 6caab7b0 ] If lower layer driver leaves the ip header in the skb fragment, it needs to be first pulled into skb->data before inspecting ip header length or ip version number. Signed-off-by:
Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ae62ca7b ] commit 35f9c09f (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag : MSG_SENDPAGE_NOTLAST meant to be set on all frags but the last one for a splice() call. The condition used to set the flag in pipe_to_sendpage() relied on splice() user passing the exact number of bytes present in the pipe, or a smaller one. But some programs pass an arbitrary high value, and the test fails. The effect of this bug is a lack of tcp_push() at the end of a splice(pipe -> socket) call, and possibly very slow or erratic TCP sessions. We should both test sd->total_len and fact that another fragment is in the pipe (pipe->nrbufs > 1) Many thanks to Willy for providing very clear bug report, bisection and test programs. Reported-by:
Willy Tarreau <w@1wt.eu> Bisected-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ilpo Järvinen authored
[ Upstream commit 6731d209 ] There are transients during normal FRTO procedure during which the packets_in_flight can go to zero between write_queue state updates and firing the resulting segments out. As FRTO processing occurs during that window the check must be more precise to not match "spuriously" :-). More specificly, e.g., when packets_in_flight is zero but FLAG_DATA_ACKED is true the problematic branch that set cwnd into zero would not be taken and new segments might be sent out later. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2e5f4212 ] Commit 9dc27415 (tcp: fix ABC in tcp_slow_start()) uncovered a bug in FRTO code : tcp_process_frto() is setting snd_cwnd to 0 if the number of in flight packets is 0. As Neal pointed out, if no packet is in flight we lost our chance to disambiguate whether a loss timeout was spurious. We should assume it was a proper loss. Reported-by:
Pasi Kärkkäinen <pasik@iki.fi> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit b9149729 ] Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
-
Ian Campbell authored
[ Upstream commit 4cc7c1cb ] Signed-off-by:
-
Matthew Daley authored
[ Upstream commit 7d5145d8 ] Signed-off-by:
Matthew Daley <mattjd@gmail.com> Reviewed-by:
-
Ian Campbell authored
[ Upstream commit 48856286 ] A buggy or malicious frontend should not be able to confuse netback. If we spot anything which is not as it should be then shutdown the device and don't try to continue with the ring in a potentially hostile state. Well behaved and non-hostile frontends will not be penalised. As well as making the existing checks for such errors fatal also add a new check that ensures that there isn't an insane number of requests on the ring (i.e. more than would fit in the ring). If the ring contains garbage then previously is was possible to loop over this insane number, getting an error each time and therefore not generating any more pending requests and therefore not exiting the loop in xen_netbk_tx_build_gops for an externded period. Also turn various netdev_dbg calls which no precipitate a fatal error into netdev_err, they are rate limited because the device is shutdown afterwards. This fixes at least one known DoS/softlockup of the backend domain. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit b5c37fe6 ] On sctp_endpoint_destroy, previously used sensitive keying material should be zeroed out before the memory is returned, as we already do with e.g. auth keys when released. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 6ba542a2 ] In sctp_setsockopt_auth_key, we create a temporary copy of the user passed shared auth key for the endpoint or association and after internal setup, we free it right away. Since it's sensitive data, we should zero out the key before returning the memory back to the allocator. Thus, use kzfree instead of kfree, just as we do in sctp_auth_key_put(). Signed-off-by:
-
Neil Horman authored
[ Upstream commit 2f94aabd ] Jamie Parsons reported a problem recently, in which the re-initalization of an association (The duplicate init case), resulted in a loss of receive window space. He tracked down the root cause to sctp_outq_teardown, which discarded all the data on an outq during a re-initalization of the corresponding association, but never reset the outq->outstanding_data field to zero. I wrote, and he tested this fix, which does a proper full re-initalization of the outq, fixing this problem, and hopefully future proofing us from simmilar issues down the road. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Jamie Parsons <Jamie.Parsons@metaswitch.com> Tested-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit ab54ee80 ] We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by:
-
Phil Sutter authored
[ Upstream commit 9665d5d6 ] When releasing a packet socket, the routine packet_set_ring() is reused to free rings instead of allocating them. But when calling it for the first time, it fills req->tp_block_nr with the value of rb->pg_vec_len which in the second invocation makes it bail out since req->tp_block_nr is greater zero but req->tp_block_size is zero. This patch solves the problem by passing a zeroed auto-variable to packet_set_ring() upon each invocation from packet_release(). As far as I can tell, this issue exists even since 69e3c75f (net: TX_RING and packet mmap), i.e. the original inclusion of TX ring support into af_packet, but applies only to sockets with both RX and TX ring allocated, which is probably why this was unnoticed all the time. Signed-off-by:
Phil Sutter <phil.sutter@viprinet.com> Cc: Johann Baudy <johann.baudy@gnu-log.net> Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit bd30e947 ] They will be created at output, if ever needed. This avoids creating empty neighbor entries when TPROXYing/Forwarding packets for addresses that are not even directly reachable. Note that IPv4 already handles it this way. No neighbor entries are created for local input. Tested by myself and customer. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 604dfd6e ] The return value of pktgen_add_device() is not checked, so even if we fail to add some device, for example, non-exist one, we still see "OK:...". This patch fixes it. After this patch, I got: # echo "add_device non-exist" > /proc/net/pktgen/kpktgend_0 -bash: echo: write error: No such device # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: Result: ERROR: can not add device non-exist # echo "add_device eth0" > /proc/net/pktgen/kpktgend_0 # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: eth0 Result: OK: add_device=eth0 (Candidate for -stable) Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 794ed393 ] Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [<ffffffff813a3c4d>] loopback_xmit+0x64/0x83 [<ffffffff81477364>] dev_hard_start_xmit+0x26c/0x35e [<ffffffff8147771a>] dev_queue_xmit+0x2c4/0x37c [<ffffffff81477456>] ? dev_hard_start_xmit+0x35e/0x35e [<ffffffff8148cfa6>] ? eth_header+0x28/0xb6 [<ffffffff81480f09>] neigh_resolve_output+0x176/0x1a7 [<ffffffff814ad835>] ip_finish_output2+0x297/0x30d [<ffffffff814ad6d5>] ? ip_finish_output2+0x137/0x30d [<ffffffff814ad90e>] ip_finish_output+0x63/0x68 [<ffffffff814ae412>] ip_output+0x61/0x67 [<ffffffff814ab904>] dst_output+0x17/0x1b [<ffffffff814adb6d>] ip_local_out+0x1e/0x23 [<ffffffff814ae1c4>] ip_queue_xmit+0x315/0x353 [<ffffffff814adeaf>] ? ip_send_unicast_reply+0x2cc/0x2cc [<ffffffff814c018f>] tcp_transmit_skb+0x7ca/0x80b [<ffffffff814c3571>] tcp_connect+0x53c/0x587 [<ffffffff810c2f0c>] ? getnstimeofday+0x44/0x7d [<ffffffff810c2f56>] ? ktime_get_real+0x11/0x3e [<ffffffff814c6f9b>] tcp_v4_connect+0x3c2/0x431 [<ffffffff814d6913>] __inet_stream_connect+0x84/0x287 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff8108d695>] ? _local_bh_enable_ip+0x84/0x9f [<ffffffff8108d6c8>] ? local_bh_enable+0xd/0x11 [<ffffffff8146763c>] ? lock_sock_nested+0x6e/0x79 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff814d6b49>] inet_stream_connect+0x33/0x49 [<ffffffff814632c6>] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226a (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Timo Teräs authored
[ Upstream commit 5d0feaff ] This was introduced in commit 6dccd16b "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af2142 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a05948f2 ] Christoph Paasch found netxen could trigger a BUG in its dismantle phase, in netxen_release_tx_buffer(), using full size TSO packets. cmd_buf->frag_count includes the skb->data part, so the loop must start at index 1 instead of 0, or else we can make an out of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2] Christoph provided the fixes in netxen_map_tx_skb() function. In case of a dma mapping error, its better to clear the dma fields so that we don't try to unmap them again in netxen_release_tx_buffer() Reported-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by:
-
Tilman Schmidt authored
[ Upstream commit d721a175 ] If subtracting 12 from l leaves zero we'd do a zero size allocation, leading to an oops later when we try to set the NUL terminator. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Romain KUNTZ authored
[ Upstream commit 7efdba5b ] Commit 299b0767 (ipv6: Fix IPsec slowpath fragmentation problem) has introduced a error in the header length calculation that provokes corrupted packets when non-fragmentable extensions headers (Destination Option or Routing Header Type 2) are used. rt->rt6i_nfheader_len is the length of the non-fragmentable extension header, and it should be substracted to rt->dst.header_len, and not to exthdrlen, as it was done before commit 299b0767. This patch reverts to the original and correct behavior. It has been successfully tested with and without IPsec on packets that include non-fragmentable extensions headers. Signed-off-by:
Romain Kuntz <r.kuntz@ipflavors.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit adbbf69d ] I changed my email because the vyatta.com mail server is now redirected to brocade.com; and the Brocade mail system is not friendly to Linux desktop users. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Romain Kuntz authored
[ Upstream commit 85da53bf ] The tests on the flags in addrconf_get_prefix_route() does no make much sense: the 'noflags' parameter contains the set of flags that must not match with the route flags, so the test must be done against 'noflags', and not against 'flags'. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit c9be4a5c ] A regression is introduced by the following commit: commit 4d52cfbe Author: Eric Dumazet <eric.dumazet@gmail.com> Date: Tue Jun 2 00:42:16 2009 -0700 net: ipv4/ip_sockglue.c cleanups Pure cleanups but it is not a pure cleanup... - if (val != -1 && (val < 1 || val>255)) + if (val != -1 && (val < 0 || val > 255)) Since there is no reason provided to allow ttl=0, change it back. Reported-by:
nitin padalia <padalia.nitin@gmail.com> Cc: nitin padalia <padalia.nitin@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
