- 01 Sep, 2009 8 commits
-
-
Paul Mundt authored
This fixes up a build warning introduced by the proto board resource changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This board doesn't use trapped I/O for anything, so just kill off the select. This was causing problems in the unhandled page fault die path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This builds on top of the previous reversion and implements a special on_each_cpu() variant that simple disables preemption across the call while leaving the interrupt state to the function itself. There were some unintended consequences with IRQ disabling in some of these paths on UP that ran in to a deadlock scenario with IRQs being missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This reverts commit 64a6d722. Unfortunately we can't use on_each_cpu() for all of the cache ops, as some of them only require preempt disabling. This seems to be the same issue that impacts the mips r4k caches, where this code was based on. This fixes up a deadlock that showed up in some IRQ context cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The kgdb stub has traditionally tied in to the NMI slot, and manually handled debounce. Now that we have a generic way to do this instead, all of the stub-specific debounce silliness can be killed off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This implements support for NMI debugging that was shamelessly copied from the avr32 port. A bit of special magic is needed in the interrupt exception path given that the NMI exception handler is stubbed in to the regular exception handling table despite being reported in INTEVT. So we mangle the lookup and kick off an EXPEVT-style exception dispatch from the INTEVT path for exceptions that do_IRQ() has no chance of handling. As a result, we also drop the evt2irq() conversion from the do_IRQ() path and just do it in assembly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Conflicts: arch/sh/mm/cache-sh4.c
-
Matt Fleming authored
This adopts the special-cased 2-way write-through dcache flusher for N-ways and moves it in to the generic path. Assignment is done at runtime via the check for the CCR_CACHE_WT bit in the same path as the per-way writeback flushers. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 31 Aug, 2009 2 commits
-
-
Paul Mundt authored
This fixes up the simplified multi-evt handling when sparseirq support is enabled. While vectors are redirected through the single unique masking source, each one of the redirected vectors still requires its own backing irq_desc, which needs to be manually allocated in the sparseirq case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
A couple of these popped up on the sh2a build, causing build failures. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 29 Aug, 2009 1 commit
-
-
Matt Fleming authored
Some unaligned accesses are completely expected. For example, the trapped_io code uses the unaligned access fixup code path so there's no need to warn about having to fixup the unaligned access. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 28 Aug, 2009 2 commits
-
-
Yoshihiro Shimoda authored
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 27 Aug, 2009 8 commits
-
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 25 Aug, 2009 1 commit
-
-
Paul Mundt authored
This is supposed to be the equivalent of __NR_syscalls, not __NR_syscalls -1. The x86 code this was based on had simply fallen out of sync at the time this was implemented. Fix it up now. As a result, tracing of __NR_perf_counter_open works as advertised. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 24 Aug, 2009 18 commits
-
-
Paul Mundt authored
-
Paul Mundt authored
Needed by ftrace changes in -tip. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
In certain configurations linux/err.h is not included through alternate means, resulting in: drivers/usb/gadget/m66592-udc.c:1646: error: implicit declaration of function 'IS_ERR' drivers/usb/gadget/m66592-udc.c:1649: error: implicit declaration of function 'PTR_ERR' distcc[15083] ERROR: compile drivers/usb/gadget/m66592-udc.c on localhost failed make[3]: *** [drivers/usb/gadget/m66592-udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Caught with an ARM config in -next. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Pawel Moll authored
This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Giuseppe Cavallaro authored
sys_cacheflush should return with EINVAL if the cache parameter is not one of ICACHE, DCACHE or BCACHE. So, we need to include 0 in the first check. It also adds the three definitions above as wrapper of the existent macros. PS: ltp cacheflush01 test now passes. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Change the method used to flush the cache in write-through mode to avoid corrupted data being written back to memory. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Allow peripherals before the start of RAM to be remapped. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
It is possible for the CPU to re-enable it's interrupt block bit before the write to the interrupt controller has actually masked out the external interupt at the controller. We get around this by reading back from the interrupt controller which will ensure the write has happened. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Adds a system call to allow user code to flush code from the cache. You can use instructions for the data side, but the iside can only be done by a flush ROM which really only works with a direct mapped cache. The later SH4's have 2 way Iside, so this call allows a portable way to flush the cache. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
This is a pure documentation, to try to explain why the cache flushing code for the SH4 is implemented the way it is. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Optimise memcpy_to/fromio. This is used extensivly by MTD, so is a worthwhile performance gain. The main savings come from not repeatedly calling readl/writel, and doing word instead of byte at a time transfers. Also using "movca.l" on SH4 gives a small performance win. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
After performing the port2addr conversion, and checking that the data is correctly aligned, simply call __raw_readsX/writesX. These have already been optimised. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
Reading from the ROM is not a good idea as it could disturb some flash operation that it is in progress. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Stuart Menefy authored
The SH instruction set has several instructions which accept an 8 bit immediate operand. For logical instructions this operand is zero extended, for arithmetic instructions the operand is sign extended. After adding an option to the assembler to check this, it was found that several pieces of assembly code were assuming this behaviour, and in one case getting it wrong. So this patch explicitly sign extends any immediate operands, which makes it obvious what is happening, and fixes the one case which got it wrong. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Pawel Moll authored
So far kernel command line arguments could be passed in by a bootloader or defined as CONFIG_CMDLINE, which completely overwriting the first one. This change allows a developer to declare selected kernel parameters in a kernel configuration (eg. project-specific defconfig), retaining possibility of passing others by a bootloader. The obvious examples of the first type are MTD partition or bigphysarea-like region definitions, while "debug" option or network configuration should be given by a bootloader or a JTAG boot script. Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Jon Frosdick authored
This patches will trigger a reboot using the watchdog timer instead of double fault. Unlike the previous method, this one actually works in 32 bit mode. Reset should also be cleaner. Signed-off-by: Jon Frosdick <jon.frosdick@st.com> Signed-off-by: Carl Shaw <carl.shaw@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Giuseppe Cavallaro authored
Save the VBR allowing GDB to dump full registers set but do not reload it as soon as the kgdb_handle_exception is invoked. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-