- 28 Apr, 2008 40 commits
-
-
Andres Salomon authored
We want to stop sharing stuff with gx1fb; it makes little sense. There were fields in geodefb_par that weren't being used, there was little point to the DC/VP ops callbacks, etc. This implements the following: - Create gxfb_par (based on geodefb_par), place it in gxfb.h - Drop display_gx.h and video_gx.h. The last few patches moved most stuff into gxfb.h anyways, so there was very little left. - Drop the geode_{dc,vid}_ops stuff. Un-static functions, add declarations to gxfb.h. Signed-off-by:Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
This continues the gxfb header cleanups. MSRs are defined in geode.h; the specific bits we care about are defined in gxfb.h. Signed-off-by:
-
Andres Salomon authored
This does the following in preparation for register saving: - moves the register definitions from video_gx.h and display_gx.h into gxfb.h. - renames GX_* registers to match their section (ie, VP_). - renames register bitfields to match the data sheet (ie, DC_DCFG_TGEN -> DC_DISPLAY_CFG_TGEN). - for DC registers, rather than defining to specific addresses, use an enum to number them sequentially and just multiply by 4(bytes) to access them (in read_dc/write_dc). - for VP and FP registers, use an enum and multiple by 8 (bytes). They're 64bit registers. Signed-off-by: -
Andres Salomon authored
This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. It creates gxfb.h to house these. We also drop a no-op readl() from gx_set_mode. Other than that, there should be no functionality change. Signed-off-by:
-
Andres Salomon authored
Use a command line option (vram) rather than hardcoding the vram size. LxFB already does this; it's useful for machines that can't query the BIOS for fb size. This patch originated from David Woodhouse, was modified by Jordan Crouse, and was then modified further by me. This also adds some gxfb documentation in Documentation/fb. Signed-off-by:
-
Andres Salomon authored
Drop the class/class_mask stuff; it's unnecessary as long as the vendor and device IDs match. Signed-off-by:
-
Jordan Crouse authored
When the FP strap is enabled, don't turn on the CRT DACs - that will save about 35 mA of power. Updated/cleaned up by Andres Salomon. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jordan Crouse authored
While running in flatpanel mode it is important to change the FP sync bits (VG register 0x408) rather then the CRT sync bits (VG register 0x008). This patch keeps the CRT sync bits at default when a flatpanel exists. Note that this also fixes inverted logic; we want CRT_VSYNC_POL to be set (ie, vsync is normally high) when FB_SYNC_VERT_HIGH_ACT is unset. Signed-off-by:
-
Andres Salomon authored
This is generic VSA2 detection. It's used by OLPC to determine whether or not the BIOS contains VSA2, but since other BIOSes are coming out that don't use the VSA (ie, tinybios), it might end up being useful for others. Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andres Salomon authored
This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: -
Harvey Harrison authored
Use __u32 for max_len to match the declaration of length in the struct fb_bitfield. Suppresses sparse shadowed variable warnings from the nested max() macros: drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_x' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here drivers/video/console/fbcon.h:130:8: warning: symbol '_y' shadows an earlier one drivers/video/console/fbcon.h:130:8: originally declared here [akpm@linux-foundation.org: fix constness] Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
Fix error values returned in some code branches in the pm2fb_probe() function. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Anton Vorontsov authored
Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Anton Vorontsov authored
Add support for the framebuffers with non-native endianness. This is done via FBINFO_FOREIGN_ENDIAN flag that will be used by the drivers. Depending on the host endianness this flag will be overwritten by FBINFO_BE_MATH internal flag, or cleared. Tested to work on MPC8360E-RDK (BE) + Fujitsu MINT framebuffer (LE). Signed-off-by:
-
Michal Januszewski authored
Currently, if a perfect match in terms of resolution is not found, fb_find_mode() only looks for a best-fit mode among modes with a higher resolution than the one requested. Thus, if the user requests a resolution higher than the largest supported one, they are dropped to the default mode (usually a low resolution one). Change this behaviour so that all valid video modes are considered when looking for a best-fit mode, while still preferring modes with a higher resolution. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Anton Vorontsov authored
Add a new function gpiochip_reserve() to reserve ranges of gpios that platform code has pre-allocated. That is, this marks gpio numbers which will be claimed by drivers that haven't yet been loaded, and thus are not available for dynamic gpio number allocation. [akpm@linux-foundation.org: remove unneeded __must_check] [david-b@pacbell.net: don't export gpiochip_reserve (section fix)] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anton Vorontsov authored
If gpio_chip->base is negative during registration, gpiolib performs dynamic base allocation. This is useful for devices that aren't always present, such as GPIOs on hotplugged devices rather than mainboards. (This behavior was previously specified but not implemented.) To avoid using any numbers that may have been explicitly assigned but not yet registered, this dynamic allocation assigns GPIO numbers from the biggest number on down, instead of from the smallest on up. Signed-off-by:
-
Guennadi Liakhovetski authored
Introduce a gpio_is_valid() predicate; use it in gpiolib. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> [ use inline function; follow the gpio_* naming convention; work without gpiolib; all programming interfaces need docs ] Signed-off-by:
-
Guennadi Liakhovetski authored
Use the newly introduced owner field in struct gpio_chip to protect the current (small) set of non-SOC GPIO drivers from being unloaded while any of their GPIOs are in use. Signed-off-by:
-
Guennadi Liakhovetski authored
As long as one or more GPIOs on a gpio chip are used its driver should not be unloaded. The existing mechanism (gpiochip_remove failure) doesn't address that, since rmmod can no longer be made to fail by having the cleanup code report errors. Module usecounts are the solution. Assuming standard "initialize struct to zero" policies, this change won't affect SOC platform drivers. However, drivers for external chips (on I2C and SPI busses) should be updated if they can be built as modules. Signed-off-by:
-
Ilpo Järvinen authored
Nothing in between of them and the later declaration with body needs them. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Robert P. J. Day authored
Since CONFIG_AVMB1_COMPAT is not a Kconfig variable, move it out of the Kconfig namespace. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Cyrill Gorcunov authored
capifs_remount may reach 'return' statement without freeing of memory allocated by kstrdup call Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Bjorn Helgaas authored
The PNP driver interfaces depend on CONFIG_PNP, so test that rather than __ISAPNP__. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Robert P. J. Day authored
Fix a rather obvious cut-and-paste error, where earlier code for the controller URB got somehow mixed in with code for the interrupt URB. Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
drivers/isdn/hardware/eicon/message.c:745:47: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:761:45: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9122:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9147:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9173:14: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/divasmain.c:396:23: warning: Using plain integer as NULL pointer Signed-off-by:
-
Harvey Harrison authored
drivers/isdn/hardware/avm/b1isa.c:206:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1isa.c:208:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:664:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:666:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:668:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:791:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1.c:793:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:385:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pci.c:387:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:886:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:888:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:890:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:973:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1dma.c:975:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:204:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/b1pcmcia.c:206:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:554:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1isa.c:556:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:236:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/t1pci.c:238:33: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1091:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1093:44: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1095:42: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1170:21: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1294:37: warning: Using plain integer as NULL pointer drivers/isdn/hardware/avm/c4.c:1296:33: warning: Using plain integer as NULL pointer Signed-off-by:
-
Harvey Harrison authored
drivers/isdn/capi/kcapi.c:829:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:838:27: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:954:17: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1007:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/kcapi.c:1009:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capiutil.c:453:24: warning: Using plain integer as NULL pointer drivers/isdn/capi/capilib.c:47:30: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:353:29: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:369:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:486:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:515:46: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:541:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:692:47: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:699:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:704:14: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:943:53: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:948:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:969:42: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:989:48: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1026:69: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1028:19: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1061:20: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1529:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capi.c:1531:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:338:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:758:32: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:880:40: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:407:15: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:444:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:429:49: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1664:61: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:1969:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2294:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2297:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2338:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capidrv.c:2341:33: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:192:37: warning: Using plain integer as NULL pointer drivers/isdn/capi/capifs.c:194:33: warning: Using plain integer as NULL pointer Signed-off-by:
-
Andrew Morton authored
Fixes things like this: fs/super.c: In function `deactivate_super': fs/super.c:182: warning: statement with no effect fs/super.c: In function `do_remount_sb': fs/super.c:644: warning: statement with no effect Cc: Jan Kara <jack@ucw.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
Update reiserfs to handle quotaon on remount RW. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
Update ext4 to handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Jan Kara authored
Update ext3 handle quotaon on remount RW. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Jan Kara authored
Currently, we just turn quotas off on remount of filesystem to read-only state. The patch below adds necessary framework so that we can turn quotas off on remount RO but we are able to automatically reenable them again when filesystem is remounted to RW state. All we need to do is to keep references to inodes of quota files when remounting RO and using these references to reenable quotas when remounting RW. Signed-off-by:
-
Jan Kara authored
Cleanups in quota code: Change __inline__ to inline. Change some macros to inline functions. Remove vfs_quota_off_mount() macro. DQUOT_OFF() should be (0) is CONFIG_QUOTA is disabled. Move declaration of mark_dquot_dirty and dirty_dquot from quota.h to dquot.c [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Jan Kara authored
We don't need to turn quotas off before remounting root ro, because do_remount_sb() already handles this. Signed-off-by:
-
Andrew Perepechko authored
We should check whether quota limits set via Q_SETQUOTA are not exceeding limits which quota format is able to handle. Signed-off-by:
Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by:
-
Masami Hiramatsu authored
Add the description of batch registration interfaces to Documentation/kprobes.txt. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: David Miller <davem@davemloft.net> Cc: "Frank Ch. Eigler" <fche@redhat.com> Signed-off-by:
-
Masami Hiramatsu authored
Introduce unregister_/register_jprobes() for jprobe batch registration. Signed-off-by:
-
